- `spack license list-files`: list all files that should have license headers
- `spack license list-lgpl`: list files still under LGPL-2.1
- `spack license verify`: check that license headers are correct
- Added `spack license verify` to style tests
- remove the old LGPL license headers from all files in Spack
- add SPDX headers to all files
- core and most packages are (Apache-2.0 OR MIT)
- a very small number of remaining packages are LGPL-2.1-only
- Many container builds are timing out frequently during Spack tests in
Travis CI.
- Travis recommends to try `sudo: required` to see whether this is an
infrastructure issue or something else.
- added `sudo: required` to all Linux builds.
- added --verbose to `spack test` invocation so that we can see more
easily what tests it's timing out on.
Signed-off-by: Todd Gamblin <tgamblin@llnl.gov>
As requested in the review all the commands meant to manage module
files have been grouped under the `spack module` command.
Unit tests have been refactored to match the new command structure.
fixes#2215fixes#2570fixes#6676fixes#7281closes#3827
This PR reverts the use of `spack module loads` in favor of
`spack module find` when loading module files via Spack. After this PR
`spack load` will accept a single spec at a time, and will be able
to interpret correctly the `--dependencies` option.
- The setup-env.sh script currently makes two calls to spack, but it
should only need to make one.
- Add a fast-path shell setup routine in `main.py` to allow the shell
setup to happen in a single, fast call that doesn't load more than it
needs to.
- This simplifies setup code, as it has to eval what Spack prints
- TODO: consider eventually making the whole setup script the output of a
spack command
- replace `spack.config.get_configuration()` with `spack.config.config()`
- replace `get_config`/`update_config` with `get`, `set`
- add a path syntax that can be used to refer to specific config options
without firt getting the entire configuration dict
- update usages of `get_config` and `update_config` to use `get` and `set`
fixes#7593
Unit tests on OSX are trying to concretize mpileaks, and they fail due
to a conflict in the package:
"%gcc@7.2.0:" conflicts with "elfutils@0.163"
This solves the issue asking explicitly to concretize against
elfutils@1.170
Fixes#7593
By default MacOS concretizes using the clang compiler. The unit tests
include a call to "spack spec mpileaks", which has elfutils as a
dependency; #7096 added a conflict in elfutils to avoid building
with clang, which lead to the MacOS unit tests to start failing.
This updates the concretization to force using gcc when concretizing
mpileaks.
* Revert "Travis: use --concurrency=multiprocessing only on build tests (#6872)"
This reverts commit 596d463714.
* Removing 'coverage combine' in test script
According to what was discovered in #6887, one of the problems is
calling 'coverage combine' twice without the '-a' flag. This removes
the first call within our test scripts.
On a local workstation, it seems that tracking multiple processes during
coverage may result in malformed coverage reports for unit tests and not
for build tests.
Given that multiple processes make a difference in coverage mainly for
build tests, try to disable the tracking for unit tests to see if we get
more stable coverage results.
* Reduce the calls to the python interpreter during initialization
This should reduce the delay the users experience when sourcing the
setup file to activate shell support. It works by generating at once
all the commands that needs to evaluated (they are stored in
a string and later `eval`ed by the shell).
* setup_env.sh: changed `read` with an equivalent magic
For some reason `read` breaks when sourced from a running script.
Change the incantation we use to construct the unique python command
that will be evaluated.
* setup_env.sh: python command now constructed with `printf` for portability
This recovers the support for `zsh` that was broken in previous commits.
* Reworked module file tutorial section
First draft for the SC17 update. This includes:
- adding an introduction on module files + Spack's module
generation blueprints
- adding a set-up section and provide a docker image for easy set-up
- updating all the relevant snippets
- extending a bit some of the concepts that were already touched
* Added reference to #5582 + committed Dockerfiles
Also fixed a couple of typos spotted by Denis.
* module file tutorial: added section on template customization
* module file tutorial: fixed minor typos + rephrased a sentence
* module file tutorial: made explicit that Docker image comes with software
* module file tutorial: improved phrasing and layout.
Thanks Hartzell!
* module file tutorial: added vim and nano to editors
* module file tutorial: fixed typo
* Fixed typos
Thanks Adam!
* module file tutorial: updated Dockerfile + minor changes in introduction
- This isn't one of those autogenerated SVGs from a drawing program!
- This is a completely re-traced, minimalist SVG file with clearly
delineated pieces so that your favorite renderer can draw a Spack logo
at whatever resolution you want.
- Included versions with text, as well.
setup-env.sh adds the 'module' command to the user's environment
if it is not defined and if there is a Spack installation of
environment-modules available. This commit updates that logic to
perform these checks and updates quietly.
These were discovered with bash 4.1.2.
Add quotations around a variable to prevent the destruction of a
newline. Without this fix a conditional doesn't work properly.
Remove square brackets around a conditional meant to be evaluated based
on the return code of a command. This wasn't working properly with an
old bash.
Fix a typo.
Renames the existing bootstrap command to 'clone'. Repurposes
'spack bootstrap' to install packages that are useful to the
operation of Spack (for now this is just environment-modules).
For bash and ksh users running setup-env.sh, if a Spack-installed
instance of environment-modules is detected and environment modules
and dotkit are not externally available, Spack will define the
'module' command in the user's shell to use the environment-modules
built by Spack.
- This should speed-up Travis CI tests and refers to #5049
- Travis uses build-stages to group tests together
- The idea is to let fast tests fail first, then move to longer ones.
- Added external perl to avoid download failure from CPAN and reduce build time
- Disabling perl-dbi: continues to fail with (504 Gateway Time-out) on Travis
- We now cover all the build systems in tests:
- Add back `openblas` to Travis as a separate package.
- Switched `openblas` for `astyle` to build a simpler MakefilePackage.
- Added 'tut' (WafPackage)
- Added 'py-setuptools' (PythonPackage)
- Added 'perl-dbi' (PerlPackage)
- Added 'build_systems' directory to the ones for which we get a summary
- Added 'openjpeg' (CMakePackage)
- Added 'r-rcpp' (RPackage)
- Added comments to build tests to show the covered build system
* Merged 'purge' command with 'clean'. Deleted 'purge'. fixes#2942
'spack purge' has been merged with 'spack clean'. Documentation has been
updated accordingly. The 'clean' and 'purge' behavior are not mutually
exclusive, and they log brief information to tty while they go.
* Fixed a wrong reference to spack clean in the docs
* Added tests for 'spack clean'. Updated bash completion.
* Disable spec colorization when redirecting stdout and add command line flag to re-enable
* Add command line `--color` flag to control output colorization
* Add options to `llnl.util.tty.color` to allow color to be auto/always/never
* Add `Spec.cformat()` function to be used when `format()` should have auto-coloring
* Sphinx no longer supports Python 2.6
* Update vendored sphinxcontrib.programoutput from 0.9.0 to 0.10.0
* Documentation cannot be built in parallel
* Let Travis install programoutput for us
* Remove vendored sphinxcontrib-programoutput
Recent updates to the sphinx package prevent the vendored version
from being found in sys.path. We don't vendor sphinx, so it doesn't
make sense to vendor sphinxcontrib-programoutput either.
* Edits to get setup-env.csh working better.
Autosets the sys_type a la setup-env.sh
* More stealing from bash setup script for module roots
* Add error message if SPACK_ROOT isn't set
* Remove _sp_lmod_root per Adam J Stewart
- Full help is now only generated lazily, when needed.
- Executing specific commands doesn't require loading all of them.
- All commands are only loaded if we need them for help.
- There is now short and long help:
- short help (spack help) shows only basic spack options
- long help (spack help -a) shows all spack options
- Both divide help on commands into high-level sections
- Commands now specify attributes from which help is auto-generated:
- description: used in help to describe the command.
- section: help section
- level: short or long
- Clean up command descriptions
- Add a `spack docs` command to open full documentation
in the browser.
- move `spack doc` command to `spack pydoc` for clarity
- Add a `spack --spec` command to show documentation on
the spec syntax.
* bash completion: fixed `_spack_create-db-tarball': not a valid identifier
* bash completion: dashes are translated to underscores
This also fixes the name of the subfunction to be called, as apparently
it was not updated after moving the command `create-db-tarball`.
- Add -P <STAT> argument so that caller can specify a sort column for
cProfile. Can specify multiple columns with commas. e.g.:
spack -P cumtime,module
- Add --lines option to Spack spec to control number of profile lines
displayed
- Sort by time by default (because it works in all Python versions)
- Show sort column options in command help.
- Do a short profile run in the unit tests.
* Separate build integration tests; simplify test scripts
- Move build tests out of the regular Travis unit tests, add more smoke
test packages to build.
- Run all test scripts with bash -e, which fails on error.
- Factor coverage out into a Travis environment variable, so it's more
obvious from .travis.yml which tests contribute to coverage and which
don't.
- Factor dependency checking and much of the front-matter in tests
scripts into a setup.sh script, which is sourced by all the test
scripts. Extra cruft in each tests script now reduced to 2 lines at
the beginning.
* Package install remove prior unfinished installs
Depending on how spack is terminated in the middle of building a
package it may leave a partially installed package in the install
prefix. Originally Spack treated the package as being installed if
the prefix was present, in which case the user would have to
manually remove the installation prefix before restarting an
install. This commit adds a more thorough check to ensure that a
package is actually installed. If the installation prefix is present
but Spack determines that the install did not complete, it removes
the installation prefix and starts a new install; if the user has
enabled --keep-prefix, then Spack reverts to its old behavior.
* Added test for partial install handling
* Added test for restoring DB
* Style fixes
* Restoring 2.6 compatibility
* Relocated repair logic to separate function
* If --keep-prefix is set, package installs will continue an install from an existing prefix if one is present
* check metadata consistency when continuing partial install
* Added --force option to make spack reinstall a package (and all dependencies) from scratch
* Updated bash completion; removed '-f' shorthand for '--force' for install command
* dont use multiple write modes for completion file
* Remove fake URLs from Spack
* Ignore long lines for URLs that start with ftp:
* Preliminary changes to version regexes
* New redesign of version regexes
* Allow letters in version-only
* Fix detection of versions that end in Final
* Rearrange a few regexes and add examples
* Add tests for common download repositories
* Add test cases for common tarball naming schemes
* Finalize version regexes
* spack url test -> spack url summary
* Clean up comments
* Rearrange suffix checks
* Use query strings for name detection
* Remove no longer necessary url_for_version functions
* Strip off extraneous information after package name
* Add one more test
* Dot in square brackets does not need to be escaped
* Move renaming outside of parse_name_offset
* Fix versions for a couple more packages
* Fix flake8 and doc tests
* Correctly parse Python, Lua, and Bio++ package names
* Use effective URLs for mfem
* Add checksummed version to mitos
* Remove url_for_version from STAR-CCM+ package
* Revert changes to version numbers with underscores and dashes
* Fix name detection for tbb
* Correctly parse Ruby gems
* Reverted mfem back to shortened URLs.
* Updated instructions for better security
* Remove preferred=True from newest version
* Add tests for new `spack url list` flags
* Add tests for strip_name_suffixes
* Add unit tests for version separators
* Fix bugs related to parseable name but in parseable version
* Remove dead code, update docstring
* Ignore 'binary' at end of version string
* Remove platform from version
* Flip libedit version numbers
* Re-support weird NCO alpha/beta versions
* Rebase and remove one new fake URL
* Add / to beginning of regex to avoid picking up similarly named packages
* Ignore weird tar versions
* Fix bug in url parse --spider when no versions found
* Less strict version matching for spack versions
* Don't rename Python packages
* Be a little more selective, version must begin with a digit
* Re-add fake URLs
* Fix up several other packages
* Ignore more file endings
* Add parsing support for Miniconda
* Update tab completion
* XFAILS are now PASSES for 2 web tests
* ENH: add package for building OpenFOAM (1612) from www.openfoam.com
- provide 'openfoam' as virtual package.
- package as openfoam-com to reflect the distribution point.
This initial spack packaging for OpenFOAM supports a number of possible
variants and should handle 64-bit labels properly now that the scotch
package has been updated accordingly.
* ENH: update package for foam-extend (extend-project.de)
- provide 'openfoam' as virtual package.
- much of the build is now aligned with how the openfoam-com package
looks, with the aim of future refactoring.
- avoid installing intermediate targets.
- contains its own environment sourcing script for the build, for more
flexibility and robustness (doesn't touch the python build environ)
* ENH: added package for building from openfoam.org
- provide 'openfoam' as a virtual package.
- this is largely a direct copy of the openfoam-com package.
It has been supplied as a courtesy for users and to ensure maximum
consistency in quality and naming between the foam-extend,
openfoam-com and openfoam-org packages.
* CONFIG: add openfoam into bash completion providers list
* ENH: have openfoam-com use spack as USERMPI
- also simplify the generation of mplib/compiler rules
* ENH: have openfoam-org use spack as SYSTEMMPI
- this setup requires more environment settings than USERMPI
(openfoam-com), but is currently the only means of integration
for openfoam-org
- simplify generation of mplib/compiler rules
* ENH: simplify generation of mplib/compiler rules (foam-extend)
- rename mpi rules from SPACK,SPACKMPI to USER,USERMPI for consistency
with openfoam-com and to generalize for any build system.
* STYLE: record spack tree as a log file (openfoam)
- can be useful for future diagnostics and general record keeping
* Porting: substitute nose with ytest
This huge commit substitutes nose with pytest as a testing system. Things done here:
* deleted external/nose as it is no longer used
* moved mock resources in their own directory 'test/mock/'
* ported two tests (cmd/find, build_system) to pytest native syntax as an example
* build_environment, log: used monkeypatch instead of try/catch
* moved global mocking of fetch_cache to an auto-used fixture
* moved global mocking from test/__init__.py to conftest.py
* made `spack test` a wrapper around pytest
* run-unit-tests: avoid running python 2.6 tests under coverage to speed them up
* use `pytest --cov` instead of coverage run to cut down testing time
* mock/packages_test: moved mock yaml configuration to files instead of leaving it in the code as string literals
* concretize.py: ported tests to native pytest, reverted multiprocessing in pytest.ini as it was creating the wrong report for coveralls
* conftest.py, fixtures: added docstrings
* concretize_preferences.py: uses fixtures instead of subclassing MockPackagesTest
* directory_layout.py: uses fixtures instead of subclassing MockPackagesTest
* install.py: uses fixtures instead of subclassing MockPackagesTest
* optional_deps.py: uses fixtures instead of subclassing MockPackagesTest
optional_deps.py: uses fixtures instead of subclassing MockPackagesTest
* packages.py: uses fixtures instead of subclassing MockPackagesTest
* provider_index.py: uses fixtures instead of subclassing MockPackagesTest
* spec_yaml.py: uses fixtures instead of subclassing MockPackagesTest
* multimethod.py: uses fixtures instead of subclassing MockPackagesTest
* install.py: now uses mock_archive_url
* git_fetch.py: uses fixtures instead of subclassing MockPackagesTest
* hg_fetch.py: uses fixtures instead of subclassing MockPackagesTest
* svn_fetch.py, mirror.py: uses fixtures instead of subclassing MockPackagesTest
repo.py: deleted
* test_compiler_cmd.py: uses fixtures instead of subclassing MockPackagesTest
* cmd/module.py, cmd/uninstall.py: uses fixtures instead of subclassing MockDatabase
* database.py: uses fixtures instead of subclassing MockDatabase, removed mock/database
* pytest: uncluttering fixture implementations
* database: changing the scope to 'module'
* config.py: uses fixtures instead of subclassing MockPackagesTest
* spec_dag.py, spec_semantics.py: uses fixtures instead of subclassing MockPackagesTest
* stage.py: uses fixtures instead of subclassing MockPackagesTest. Removed mock directory
* pytest: added docstrings to all the fixtures
* pytest: final cleanup
* build_system_guess.py: fixed naming and docstrings as suggested by @scheibelp
* spec_syntax.py: added expected failure on parsing multiple specs closes#1976
* Add pytest and pytest-cov to Spack externals.
* Make `spack flake8` ignore externals.
* run-unit-tests runs spack test and not pytest.
* Remove all the special stuff for `spack test`
- Remove `conftest.py` magic and all the special case stuff in `bin/spack`
- Spack commands can optionally take unknown arguments, if they want to
handle them.
- `spack test` is now a command like the others.
- `spack test` now just delegates its arguments to `pytest`, but it does
it by receiving unknown arguments and NOT taking an explicit
help argument.
* Fix error in fixtures.
* Improve `spack test` command a bit.
- Now supports an approximation of the old simple interface
- Also supports full pytest options if you want them.
* Use external coverage instead of pytest-cov
* Make coverage use parallel-mode.
* change __init__.py docs to include pytest
- Ported old run-flake8-tests qa script to `spack flake8` command.
- New command does not modify files in the source tree
- Copies files to a temp stage modifies them there, and runs tests.
- Updated docs and `run-flake8-tests` script to call `spack flake8`.
* Warn user if flake8 can't find setuptools
* Add missing dependencies of flake8
* Updates to py-autopep8, make packages activateable
* Check for presence of setuptools for Sphinx too
* Fix bug in order of commands
spack module :
- refresh accepts a constraint
- find and refresh share common cli options
- ask for confirmation before refreshing
- deleting the module file tree is now optional
Yay for non-portable declaration syntax. After the previous screwiness
I ran this through a number of shells, and found that this is the most
portable version I coudl seem to get.
The setup-env.sh script now saves off the argument array before shifting off
all the arguments so that the final command invocation doesn't arbitrarily
requote the arguments. All external quoting is preserved now. This has been
thoroughly tested with zsh, but should probably be tested with bash etc.
before acceptance.
- One file with all the module classes (spack/modules.py)
- Has an EnvModule superclass that does most of the work and consolidates common code
- Subclasses have specializations for different module systems (TclModule, Dotkit)
- One command (spack module) for all the types of modules to use
- the one command is used by the scripts, only need to maintain in one place
- has some subcommands for different module types, but they're handled mostly generically.
- Consolidate zsh support into a single setup-env.sh script.
- New spack.hooks package
- contains modules with pre and post install hooks
- New dotkit hook module
- generates/removes dotkits on install/uninstall
- New spack use, spack unuse commands
- use same syntax as install/uninstall
- New setup-env.bash script
- Sets up path, dotkit support
- new spack dotkit command
- used by script to parse specs, generate
specs of installed pckages for dotkit file names
