* Add new strumpack version (3.2.0), with new
dependency on ButterflyPACK.
* add ButterflyPACK version 1.1.0
* Add strumpack version 3.3.0, add dependency on ButterflyPACK 1.1.0
* Sort ButterflyPACk versions from newest to oldest
* Add a shared variant for STRUMPACK
* Also allow possible newer versions of ButterflyPACK
* New Package: py-pyside2
https://wiki.qt.io/Qt_for_Python
The Qt for Python project aims to provide a complete port of the PySide module
to Qt 5. The development started on GitHub in May 2015. The project managed to
port Pyside to Qt 5.3, 5.4 & 5.5. During April 2016 The Qt Company decided to
properly support the por
* Address review comments:
+ Add a variant for `+doc` and only depned on some packages if this variant is
active.
+ Enable building the tests if requested.
+ Correct registered required verions for python and qt.
* Remove dead code, fix depends_on command args.
* fix one more flake8 issue.
* One more fix to arguments and change version name to .
* Add a variant for tests and parallelize builds
- Fix a bug with boost defaulting to cxxstd=98 when cxxstd=11 is the
minimum for hpx
- Disable tests by default and use a variant to enable them if requested
- Enable parallel builds: each process takes up to 1Gb when tests are
not enabled.
* Remove tests variant
- The variant doesn't change what gets installed. Testing can be
activated using `spack install --test=root hpx`
* Propagate MPI option in VTK to NetCDF
This fixes a conflict message reads as though NetCDF always requires
hdf5+mpi. It allows `visit~mpi` to resolve correctly without an
additional `^netcdf~mpi`.
* Tell VisIt not to look for 'hdf5_mpi' library
- patched versions are located in the same directory as the
original release. For example, 1906_191103 is located in
the 'v1906/' directory, not in 'v1906_191103/'.
- add master branch as a known version
* package py-zc-buildout
* package py-zc-buildout
* Update var/spack/repos/builtin/packages/py-zc-buildout/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-zc-buildout/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* license bits
* Update var/spack/repos/builtin/packages/py-zc-buildout/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* package py-cherrypy
* package py-cherrypy
* autopep8, docutils cleanup
* Update var/spack/repos/builtin/packages/py-cherrypy/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-cherrypy/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-cherrypy/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* portend depends on tempora, not cherrypy directly
* setuptools_scm bits
* dependency one level up
* license bits
* Update var/spack/repos/builtin/packages/py-cherrypy/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* package py-tempora
* package py-tempora
* Update var/spack/repos/builtin/packages/py-tempora/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* missing deps
* Update var/spack/repos/builtin/packages/py-tempora/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-tempora/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-tempora/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* license bits
* (py)arrow: new versions
* move py-arrow source to github as not all versions are on pypi
same checksum as pypi, adding build_directory
* move back to pypi sources
* drop 0.15.0 and 0.14.1 as only .whl are available on pypi
* add new dependencies
* Update var/spack/repos/builtin/packages/py-pyarrow/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* py-jupyter-core add new version and setuptools dependency
* update checksums to use pypi
* fixup url and python dep type
* Update var/spack/repos/builtin/packages/py-jupyter-core/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* new package: py-dateparser
* take setup.py dependencies into account
* fixup help->description
* reorder dependencies
* drop version constraints not enforced in setup.py
netcdf-fortran@4.5: will error if netcdf-c has been built with MPI
support:
```
configure: error:
-----------------------------------------------------------------------
The NetCDF C library is built with parallel I/O feature enabled, but
the Fortran compiler '.../lib/spack/env/gcc/gfortran' supplied in this configure command
does not support MPI-IO. Please use one that does. If parallel I/O
feature is not desired, please use a NetCDF C library with parallel
I/O feature disabled. Abort.
-----------------------------------------------------------------------
```
Copy logic from netcdf-c to add an `mpi` variant.
* pybind11: test get_include path
Helper for non-CMake downstream projects to find the pybind11
header location.
* pybind11: return proper get_include()
use our prefix instead of letting pybind11 trying to self-determine
it from given conda/virtualenv/global rules.
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* new package: py-ics
* drop 0.5 and move to tar-ball
* Update var/spack/repos/builtin/packages/py-ics/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-ics/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* mpi4py 3.0.3
Adds support for Python 3.8 with new Cython files.
I tried to build 3.0.0 with Python 3.8 and this builds as well,
therefor I added no conflict.
* mpi4py: update dependency version ranges
* update py-jupyter-notebook
* add setuptools dependency for newer version
the whole jupyter collection seems to use setuptools in case of
certain setup.py-arguments from the very beginning. However the latest
ones actually require it, otherwise the build will fail
* add newly introduced dependencies
* dependency constraints
* drop terminal variant and update python dep
* added relion 3.0.8 [latest stable version in 3.0 branch] as well as 3.1_beta
* relion 3.1 beta compiles without Benchmarking build type see https://github.com/3dem/relion/issues/533
* relion 3.0.X - 3.1 now supports latest cmake@3
* flux: add `url_for_version` to support their C4 repo model
Flux uses a fork of ZeroMQ's Collective Code Construction Contract
(https://github.com/flux-framework/rfc/blob/master/spec_1.adoc).
This model requires a repository fork for every stable release that has
patch releases. For example, 0.8.0 and 0.9.0 are both tags within the
main repository, but 0.8.1 and 0.9.5 would be releases on the v0.8 and
v0.9 forks, respectively.
* flux: add latest versions
* flux: remove master from `when=@0.X:,master` statements
Now that #1983 has been merged, master > 0.X.0.
* flux-core: remove extraneous `99` patch version in `when` range
Replace `when=@:0.11.99` with `when=@:0.11` since the intention is to
include all patch versions of `0.11`.
* flux-core: fix `setup_build_environment` after changes in #13411
In #13411, `setup_environment` was split into `setup_build_environment`
and `setup_run_environment`, with the `spack_env` and `run_env`
arguments being changed to `env`. Somehow the flux package was the only
one to not have its `spack_env` references in the function changed to
`env`.
* flux: add runtime environment variables that Flux checks
with older versions of Flux (i.e, 0.0:0.13), FLUX_CONNECTOR_PATH must be
set by spack to prevent failures in certain
scenarios (https://github.com/flux-framework/flux-core/issues/2456).
the flux binary also sets some other environment variables, which can be
listed by running `flux -v start`. I added a few of those just to be
sure that the Spack-installed paths are used, rather than
system-installed ones.
* flux: add optional testing dependencies to maximize test coverage
Install optional dependencies to ensure that only spack-installed
software is detected and that all tests are run when `spack install
--test` is used.
Flux's test suite will test for the existance of valgrind, jq, and any
MPI installation. If it detects them (even if they are system-installed
and outside the spack environment), it will run optional tests against
them. I noticed on my machine that the valgrind tests were running
against the system-install valgrind.
* flux-sched: switch to new `setup_run_environment` API
* r-gstat: new package at 2.0-3
* Update var/spack/repos/builtin/packages/r-gstat/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/r-gstat/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* Improvements of saga-gis package
* Added explicit version ranges for old saga-gis version
* Update var/spack/repos/builtin/packages/saga-gis/package.py
Creative usage of redefinition of getter method
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/saga-gis/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/saga-gis/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* Adding flecsph package
* Correcting header
* Boost version update
* Correcting Flake8 errors
* Correcting headers
* Develop preferred in FleCSI
* Removing FleCSPH branch of FleCSI
* MeshToolKit package
* formatting
* Formatting
* Correcting MSTK package
* Format
* Update var/spack/repos/builtin/packages/mstk/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/mstk/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/mstk/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/mstk/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/mstk/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/mstk/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/mstk/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/mstk/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/mstk/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/mstk/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* Update package.py
* Format
* Format
* Correcting package behavior
* Correcting format
* Corrections
* Update var/spack/repos/builtin/packages/mstk/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* Multiline
* r-dada2: new package at 1.14
* r-dada2: add gmake dependency
* Update var/spack/repos/builtin/packages/r-dada2/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* new package: py-scs
* rename
* flake8
* Update var/spack/repos/builtin/packages/py-scs/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* Update the module files for cbtf-krell and openspeedshop adding man paths and needed papi and libmonitor paths.
* Update module files for new API.
* Use the same python for both develop and release branches.
* add support for static (via ~shared) and use vtk-m 1.2
* updating vtkh package to output cmake configure file and pinning it to vtkm 1.2
* trying a different cmake for vtkh
* removing problematic b
* making conduit respect ~python
* fixing ascent python logic
* update ascent package
* consistant cmake usage
* conditionally add tbb in ascent if vtkh
* applying becker fix
* adding vtkh tag
* fixing vtkh tagged version
* updating ascent and conduit for static builds
* enabling openmp
* reverting files that should not have been changed
* ascent updates
* more robust handling of variants
* fixing ascent package typo
* ascent: add optional support for mfem
* enable mfem conduit support for ascent
* add optional adios dep to conduit
* remove ver req from conduit
* ascent: remove confusing comment
* tweaks to conduit and ascent pkg recipes
* fix typo in conduit package
* pref conduit master
* fixing mfem typo for ascent
* reverting files
* adding mirror for bzip
* changing mfem to depend on conduit@master to get updated relay
* restore use of conduit 0.3.1 or greater for mfem
* set master as prefered conduit version
* allow mfem to use conduit master
* adding rover package and editing ascent
* updating vtkm cmake dep
* updates from axom
* guard ascent python support on +shared
* removing rover to simply ascent package
* add fortran variant to conduit, to allow us to turn off conduit support even when a fortran compiler is specified
* fix fortran compiler check so it can work on cray systems
* working towards cuda fix for vtkm lagrange filter
* update ascent package with more variants, and patch to avoid nvcc issue
* hdf5 flags fix for BGQ
* flake8
* extra guards for cuda patch
* conduit and ascent fortran fix
* fix patch for non cuda case
* add test variant to conduit, tweak ascent pkg
* change min ver of cmake used for ascent
* h5z-zfp package: unset FC when ~fortran
* conform to expected upstream solution
* pinning vtkm
* going back to vtkm master
* add back vtk-m variant for shared libs
* update ascent and vtkh packages
* wire up option to run tests during install
* add post install test
* add testing to ascent
* tweak for blueos xl
* add ctest output on error for run_tests
* enable ctest output on error for run_tests
* add testing of the using-with-make example
* update using-with-make examples
* typo in ascent using-with-cmake test
* fix ascent using test exe names
* more fixes, less sleep
* more fixes, less sleep ...
* remove unwired up version
* improvments suggested on review
* adding new cmake
* Update package.py
* Update package.py
* changes post cori os update
* fix cray hack
* Update package.py
Fixing 'fix'. Inconsistent variable names in conduit package
* type in spack recipes
* add zfp support to conduit
* fix indent error in conduit pkg
* move to use build phases, add sphinx rtd as dep, fix ex names in tests
* add conduit 0.5.0 release
* flake8
* remove old cray hack
* incorp feedback from review
* fix to use proper build env sig
* Fix gcc recipe for RHEL7.
+ It appears that macOS related changes to the gcc recipe broke gcc on RHEL7.
This bug manifests as `libstdc++.so: undefined reference to libiconv` when gcc
is used.
+ Fixes#13452 by moving
`--with-libiconv-prefix={0}'.format(spec['libiconv'].prefix)` into the darwin
OS section of the configuration.
+ Change qualification of `depends_on(libiconv)` to limit dependency to macOS.
* Replace deprecated 'setup_environment' with 'setup_run_environment'.
* Fix cut and paste error.
* Rename 'run_env' to just 'env'.
* Add versinos 1.13.3, 1.13.2, 1.12.12, and 1.12.11
* Replace setup_environment/setup_dependent_environment with
setup_build_environment and setup_dependent_{build, run}_environment
according to 9ddc98e
* Add dependency and patch perl-dbfile
There are two problems for the building of `perl-dbfile`:
1) this package depends on the package `berkeley-db`
2) fix the building using a patch, which locates the position of `berkeley-db` and modify the configuration file for the building
* Update and reformat the script package.py
* Simplify the patch
* Update package.py
* Update package.py
* This filter_file was difficult to maintain and is no longer needed.
* Clarify lack of support for HDF5 in serial QE.
* Update QE and HDF5 conflicts based on user feedback.
* Add Lizard (LZ5)
Add a new package for Lizard, formerly LZ5, a very fast compressor
and decompressor library.
* c-blosc2: use external lizard
Use an external Lizard (LZ5) dependency and add missing
"when="s for other compressor dependents.
* Fixes for libbeagle
This PR fixes a couple of issues with the libbeagle package.
- Use args.append('--with-cuda=%s' % self.spec['cuda'].prefix)
- Disable the default of compiling with -march=native as Spack now
inserts architecture specific flags
- Set BEAST_LIB in the beast1 package not in libbeagle.
* Use new setup_run_environment method
* Add master branch as version to HPX package
* Remove C++98 option from HPX package
* Add option to turn off examples in HPX package
* Add MPI variant to HPX package
Rename the `spack diy` command to `spack dev-build` to make the use case clearer.
The `spack diy` command has some useful functionality for developers using Spack to build their dependencies and configure/build/install the code they are developing. Developers do not notice it, partly because of the obscure name.
The `spack dev-build` command has a `-u/--until PHASE` option to stop after a given phase of the build. This can be used to configure your project, run cmake on your project, or similarly stop after any stage of the build the user wants. These options are analogous to the existing `spack configure` and `spack build` commands, but for developer builds.
To unify the syntax, we have deprecated the `spack configure` and `spack build` commands, and added a `-u/--until PHASE` option to the `spack install` command as well.
The functionality in `spack dev-build` (specifically `spack dev-build -u cmake`) may be able to supersede the `spack setup` command, but this PR does not deprecate that command as that will require slightly more thought.
* mysql: Use correct python command
python~pythoncmd does not provide a python symlink for python3, so make
sure we pick the right command.
* mysql: Adapt to build env changes
* hypre: Add new variants to expost existing features.
* hypre: Add new variants to expose existing features.
* hypre: Shorten description line.
* hypre: Add an explicit else clause to disable some features.
It seems that 3.4.2 includes a change that is supposed to fix parallel
builds (https://lists.gnu.org/archive/html/bug-bison/2019-08/msg00000.html).
Instead, it actually breaks it for me (with -j48) with errors such as:
```
mv: cannot stat 'examples/c/reccalc/scan.stamp.tmp': No such file or directory
Makefile:9323: recipe for target 'examples/c/reccalc/scan.stamp' failed
```
* Ace package. Initial commit
* Correcting header now with licence.
* Using sha256
* Making requested changes:removing import line, urls and checksums in one line, and making it an MakefilePackage.
* Removing extra line
This PR ensures that environment activation sets all environment variables set by the equivalent `module load` operations, except that the spec prefixes are "rebased" to the view associated with the environment.
Currently, Spack blindly adds paths relative to the environment view root to the user environment on activation. Issue #12731 points out ways in which this behavior is insufficient.
This PR changes that behavior to use the `setup_run_environment` logic for each package to augment the prefix inspections (as in Spack's modulefile generation logic) to ensure that all necessary variables are set to make use of the packages in the environment.
See #12731 for details on the previous problems in behavior.
This PR also updates the `ViewDescriptor` object in `spack.environment` to have a `__contains__` method. This allows for checks like `if spec in self.default_view`. The `__contains__` operator for `ViewDescriptor` objects checks whether the spec satisfies the filters of the View descriptor, not whether the spec is already linked into the underlying `FilesystemView` object.
Boost iostream autodetects the compression libraries libzstd and
liblzma outside of the Spack environment.
This commit disables mentioned libraries. In the future if the
Spack zstd/lzma packages were added as dependencies of the Spack
Boost package, additional work could be done to build Boost with
the Spack-built versions of these libraries.
For some reason, newer versions of qt fail to build because they cannot
find certain system libraries such as libatomic and libdl.
Leaving the qmake compiler set to gcc seems to fix the problem.
Fixes#13221
* DataSpaces: 1.8.0
Add a newer release of DataSpaces for ADIOS2.
Also add missing `-fPIC` flags since this is a static library.
* ADIOS2: Dataspaces, libffi, libfabric
Add missing dependencies to ADIOS2. Without explicit control,
those dependencies might get picked up from the system environment
and will cause unstable builds.
* Hide transitive SST dependencies
* ADIOS2: Simplify SST CMake Flags
As proposed by Chuck
* Methods setting the environment now do it separately for build and run
Before this commit the `*_environment` methods were setting
modifications to both the build-time and run-time environment
simultaneously. This might cause issues as the two environments
inherently rely on different preconditions:
1. The build-time environment is set before building a package, thus
the package prefix doesn't exist and can't be inspected
2. The run-time environment instead is set assuming the target package
has been already installed
Here we split each of these functions into two: one setting the
build-time environment, one the run-time.
We also adopt a fallback strategy that inspects for old methods and
executes them as before, but prints a deprecation warning to tty. This
permits to port packages to use the new methods in a distributed way,
rather than having to modify all the packages at once.
* Added a test that fails if any package uses the old API
Marked the test xfail for now as we have a lot of packages in that
state.
* Added a test to check that a package modified by a PR is up to date
This test can be used any time we deprecate a method call to ensure
that during the first modification of the package we update also
the deprecated calls.
* Updated documentation
From Python docs:
--
'surrogateescape' will represent any incorrect bytes as code points in
the Unicode Private Use Area ranging from U+DC80 to U+DCFF. These
private code points will then be turned back into the same bytes when
the surrogateescape error handler is used when writing data. This is
useful for processing files in an unknown encoding.
--
This will allow us to process files with unknown encodings.
To accommodate the case of self-extracting bash scripts, filter_file
can now stop filtering text input if a certain marker is found. The
marker must be passed at call time via the "stop_at" function argument.
At that point the file will be reopened in binary mode and copied
verbatim.
* use "surrogateescape" error handling to ignore unknown chars
* permit to stop filtering if a marker is found
* add unit tests for non-ASCII and mixed text/binary files
Provide up to date specs for build options
Remove non-production versions
Format using autopep8 and flake8
Separate cmake options in adios2 2.4.0 version
Keep default as True as much as possible
Support for Python 2 and 3 for adios2 versions <= 2.4.0
Starting v2.5.0 only Python 3 is supported
Addressing review suggestions
* Add new ACTS releases
* Update ACTS dependency requirements
* We can actually be more specific here
* The material plugin is gone as of ACTS v0.10.0
* Add 0.10.4 release
* Remove material mapping plugin
It was merged into core as of 0.10.x, and given ACTS' youth it is unlikely to have actual users at this point in time.
* Minor clean-up of package information.
* Add variants, fix dependencies, and add conflicts for compilers that do not support C++17.
* Correct dependency type for CMake.
- Add a test that verifies checksums on all packages
- Also add an attribute to packages that indicates whether they need a
manual download or not, and add an exception in the tests for these
packages until we can verify them.
Some packages had incorrect checksums because they needed to be
downloaded from a new place or the package needed tweaking somehow.
These packages to sha256 and the new checksums have been verified by
fetching over https.
These packages have either been retired or are no longer retrievable from
any site we can find. They also aren't needed by other packages, so we're
removing them from Spack.
- allinea-reports: is now arm performance reports
- globus-toolkit: retired, globus is now a paid service.
- uberftp: used globus-toolkit, github site is retired.
- mpiblast: site is dead; no longer fetchable.
- py-mxnet: site and github are gone
- soap2, soapindel, soapsnp: site is gone, unfetchable
- arlecore: could not verify md5 securely
We'd like to use a consistent checksum scheme everywhere so that we can:
a) incorporate archive checksums into our specs and have a
consistent hashing algorithm across all specs.
b) index mirrors with a consistent type of checksum, and not one that
is dependent on how spack packages are written.
- [x] convert existing md5, sha224, sha512, sha1 checksums to sha256
* py-line-profiler: add 2.1.2, re-run cython if needed
See rkern/line_profiler#166.
* Update var/spack/repos/builtin/packages/py-line-profiler/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* Addition of 1.1.3 and 1.1.4
* Addition of conditional enum-34 installation.
* Update var/spack/repos/builtin/packages/py-maestrowf/package.py
Addition of versioning for pyyaml.
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* Addition of enum34 back to older versions 1.1.3 and below.
* adjust building of OpenFOAM 1806 and earlier
- spack now unpacks into spack-src, but earlier OpenFOAM versions
still expect particular directory names (eg, OpenFOAM-v1806).
Resolve by creating a symlink during patching.
* replace openfoam 1806 patch with URL version
* fujitsu-mpi: commit new package
* Add homepage.
* * Modified the MPI commands to a simple form.
* Unnecessary processing has been deleted.
* Add conflict for all compilers except the Fujitsu compiler.
* Fix typo.
* Delete versions.
* Delete conditions for specifying the Fujitsu compiler.
* fftw: grouped precisions in a single variant
* fftw: simd options are now based on target features and not on variants
* fftw: simplified computing the selected precisions
* fix ipykernel dependency, newer versions are python3-only
* Update var/spack/repos/builtin/packages/py-ipykernel/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-ipykernel/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
Dotkit is being used only at a few sites and has been deprecated on new
machines. This commit removes all the code that provide support for the
generation of dotkit module files.
A new validator named "deprecatedProperties" has been added to the
jsonschema validators. It permits to prompt a warning message or exit
with an error if a property that has been marked as deprecated is
encountered.
* Removed references to dotkit in the docs
* Removed references to dotkit in setup-env-test.sh
* Added a unit test for the 'deprecatedProperties' schema validator
* libint: switch to 2-stage build for 2.6.0+
* libint: add tune and fortran variants
* cp2k: add support for libint >= 2.0
* cp2k: use pkg-config for linking libxc
* github releases are not released versions, but from-source
releases
* they lack the mimification of the JS/CSS components and as
such require node-js and npm, this conflicts with python@3:
* this commit
* drops the from-source dependencies on node-js and npm and
* updates the checksums to the correct sha256 hashes of the
pypi releases. The pypi-tarballs are different
* ZFP: CMake Package
ZFP is primarily build via CMake, which will have all install logic
and configuration files generated.
The 0.5.0 release did not support this yet, so we toss it.
* Patch ADIOS1: ZFP 0.5.1+ support
* ZFP: Expose all CMake variants
* new package: py-python-ldap
* fix dependency types
* improvements
* Update var/spack/repos/builtin/packages/py-python-ldap/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-python-ldap/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* add openldap dependency
* go-md2man: disable module-mode
* Update var/spack/repos/builtin/packages/go-md2man/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* add singularity 3.4.1
Signed-off-by: ArangoGutierrez <eduardo@sylabs.io>
* revert some changes
Signed-off-by: ArangoGutierrez <eduardo@sylabs.io>
* add maintainers list to pkg singularity
Add @alalazo and me to the Singularity maintainers list
* Update var/spack/repos/builtin/packages/singularity/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/singularity/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/singularity/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
7bcb306 updated setup_environment in the GCC package to examine the
bin/ directory to find alternatively-named instances of CC, but this
failed to account for when GCC was being installed and failed when
it attempted to list the not-yet-existing installation prefix. This
commit updates the logic to skip this search if the bin/ directory
doesn't exist.
* libaio: fixed a condition that checks whether we are running on OS X
* libaio: simplified package by adding an explicit conflict for darwin
* libaio: added information to the docstring
* fio: added version 3.16, added conflict when using libaio, docstring
* lvm2: conflict due to libaio dep, improved docstring, simpler install
* mariadb: conflict due to libaio dep, improved docstring, version 10.4.7
* mariadb: the dependency on libaio is now conditional, removed conflict
* mariadb: fixed a typo in previous commit
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* libaio: turned into a MakefilePackage
Unlike the compiler binary name search logic, the `setup_environment` in
GCC's package assumes the compiler names are *exactly* `gcc`, `g++`,
etc. In many external installations (Homebrew, Macports) the
installation includes only *suffixed* versions such as `gcc-9`.
This patch uses the GCC compiler search suffixes to actually locate the
correct filenames for the installed compilers, allowing the
Spack-generated module file to have useful definitions of CC, CXX, etc.
It also allows for the possibility that the user's external installation
of GCC is compiled without Fortran support, in which case the `FC`
environment variables are not defined.
* The perl-uri-escape package duplicates perl-uri
The Perl URI::Escape module is in the Perl URI package so the Spack
perl-uri-escape package is a duplicate of the perl-uri package. This PR
does the following:
- replace `depends_on('perl-uri-escape')` with `depends_on('perl-uri')`
in packages that dependend on perl-uri-escape
- add the version from perl-uri-escape to perl-uri
- remove the unneeded dependency from perl-uri
- remove the perl-uri-escape package
* Reinstated perl-test-needs dependency
Put the perl-test-needs dependency for perl-uri back in but set it to
type='test'.
* For tests to succeed the type must be ('build', 'test')
Now that Spack injects microarchitecture specific optimizations for
the selected target, packages should avoid adding flags that could
step over those.
This PR adds interproscan-4.8, which has a completely different build
system than version 5. Note that this builds for running on a host as
opposed to a queue system. I am fairly certain that a queue system can
be configured later.
This PR also adds a patch for intrproscan-5 to build when the user
building the packages has a large GID by setting posix mode for tar.
* llvm: fixed issues with syntax and formatting
* use spec.architecture.target.family
* use spec.target instead of spec.architecture.target
* mesa: use == instead of __contains__
A function added to this package ran as part of importing it and
printed a warning for most Spack invocations, this removes the
warning message.
Also:
* Use compilers directly instead of Spack compiler wrappers (since
references to the compiler are embedded in text and binary files
of the installation)
* Add 'cross' variant for setting CROSS environment variable for
build
* Set UPCXX_INSTALL for generated module files
* Set UPCXX_GASNET_CONDUIT/UPCXX_NETWORK in generated module files
on Cray systems
* Also set UPCXX_NETWORK in build environment for Cray systems
The following dependencies were added:
+ depends_on('perl-exporter-tiny', type=('build', 'run'))
+ depends_on('perl-list-moreutils-xs', type=('build', 'run'))
Seamless translation from 'target=<generic>' to either
- target.family == <generic> (in methods)
- 'target=<generic>:' (in directives)
Also updated docs to show ranges in directives.
Fixes#12829
This adds a variant to the util-linux package that controls whether it
builds its own libuuid. Variant defaults to True. It enables other
packages to choose to get libuuid from the libuuid package instead.
This also changes the cryptsetup package to build util-linux with
~libuuid (so it uses an explicitly-Spack-built instance of libuuid
instead).
- add missing perl dependency
- only filter Makefile if referred to dependency is in the spec
- rewrite the shebang line of scripts to use spack perl
- remove tabix dependency as tabix and bgzip are part of htslib
* cuda: New version 10.1.243
Adds CUDA 10.1.243. The installer command-line arguments have slightly
changed, hence in the install method the version needs to be inspected
in order to give the correct arguments for the new installer.
* cuda: Combine common command-line arguments
The CUDA 10.1+ installer has slightly different command-line arguments
than previous versions. Keep the common parts together and only split
where they are different.
* Make flake8 happy
* update py-bokeh: new version & dependencies
* Revert "update py-bokeh: new version & dependencies"
This reverts commit 5e191a0b20a89f09630b4d223a28b19db715603f.
* update py-bokeh: new version & dependencies
* trigger travis-ci
* adjust python dependency-type to br
* update py-bokeh: new version & dependencies
* Revert "update py-bokeh: new version & dependencies"
This reverts commit 5e191a0b20a89f09630b4d223a28b19db715603f.
* new package: py-fsspec: add package.py
* trigger travis-ci
* adjust python dependency-type to br
* CGNS: Add setting of RPATH on Darwin
This should go in the CGNS CMakeLists.txt, but it isn't there yet and won't be in previous versions, so best to handle it here.
If building on darwin/MacOSX, need to set the RPATH so applications can find shared library correctly.
* Restrict MACOSX_RPATH setting
This has now been added to the CGNS distribution, so the setting of `CMAKE_MACOSX_RPATH` should be restricted to current and previous releases and not upcoming releases.
* new package: py-configojb
* add version 4.7.2
* improve dependencies
* fix url for versions > 5.0.0
* Update var/spack/repos/builtin/packages/py-configobj/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-configobj/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* use format to create url strings
* fix typo
* improve style
* Update var/spack/repos/builtin/packages/py-configobj/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* py-gpaw: Fixing missing numpy include path, adding newer version of py-gpaw and fixing a bug with libxc.c in older py-gpaw
* py-gpaw: Fix Python and ASE version dependencies
- GPAW 19.8.1 requires Python 3.x, add dependency on python@3.5:
- GPAW releases are associated with a corresponding ASE release, add
matching ASE version dependencies.
* py-gpaw: Enable the scalapack variant by default
GPAW installation instructions say scalapack is optional but "highly
recommended". Thus enable it by default.
* add new cutadapt release 2.5, and adjust dependencies conditional on version
* use https, not ssh, for git url
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* update py-xopen (add 0.8.2 checksum)
* refine version specific dependencies
add py-bz2file, which needs to be created
* create py-bz2file
* Revert "refine version specific dependencies"
This reverts commit 70649da98851fefb2f936ca99a012fe6bef07b70.
* Revert "update py-xopen (add 0.8.2 checksum)"
This reverts commit 7400f44caa6e98419eb4bc3107704b91e8a2018b.
* update py-xopen (add 0.8.2 checksum)
* refine version specific dependencies
add py-bz2file, which needs to be created
* py-bz2file needed when built with python 2.7
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* space after comma
- Fix trailing whitespace missed by the bug described in #12755.
- Fix other style issues that have crept in over time (this can happen
when flake8 adds new checks with new versions)
There are problems with libunwind for arm and trying to use it with mesa.
See for example:
https://github.com/grate-driver/mesa/issues/6
disabling use of libunwind for arm, allows the package to be built
Signed-off-by: Howard Pritchard <hppritcha@gmail.com>
- Use of symbol testing macro requires explicit include()
- CMake policies are not version-portable and the support has to queried
based on CMake version
* libpeas@1.22.0: new package
* libpeas: note more build dependencies
Build and link dependencies were obtained through a combination of
examining the `config.log` file from `configure` and looking at the
pkg-config files of `libpeas`.
* libpeas: add search path for GIR/typelib files
* Use spec.architecture.target insted of platform.
* remove default in simd variant value.
simd variant change to archtecture independent values.
* Add check simd values.
* rewrite check simd values.
* * flake8
* change aarch64 to arm (neon support only 32 bit arm.)
* py-ase: New version 3.18
Add ASE version 3.18. ASE 3.18 has dropped support for python 2.x,
hence add a dependency on python@3.5: for it.
* Add more ASE dependencies
Address review comments, add dependencies on py-scipy, py-matplotlib,
py-flask, and also add type=('build', 'run') dependency specifiers.
While debugging this package on our Cray machine, tmux was throwing an
error involving the ncurses headers. Tmux would look for headers in
system locations rather than where spack installed ncurses. Tested only
on a Cray.
* Install the newest version of ncbi-rmblastn
Version ncbi-rmblastn 2.2.28 coonfiguration fails for gcc compiler on ubuntu 16.04 due to some compatibility issues that requires manual intervention to keep the installation going. However you still stumble upon other issues while compiling it.
Using Intel compiler passes the configuration step but fails for the compilation process as well.
Here I'm using the latest version and patch, and the recommended configuration option as mention in http://www.repeatmasker.org/RMBlast.html
* uploading ncbi-blast patch
The mariadb-5.5 series can not be compiled with gcc-9.1.0 and above. Add
a conflicts statement to reflect that.
The error is due to -Werror=address-of-packed-member, a warning that is
new in gcc-9.
* Update R CRAN packages
This PR update R CRAN packages. It also ensures that spack built
packages that correspond to R recommended packages are specified in the
dependency list. This is needed for #12015.
* Add more updates to packages
* Updated dependencies of CRAN R packages
Also, use cloud.r-project.org rather than cran.r-project.org to use
automatic redirection to mirrors. This minimizes the load on the cran
server.
* Update to latest versions of CRAN R packages
* Fix flake8 issues
Some blank lines at the end of a coupple of package files crept in.
* Adjust r-animation dependencies
The r-magick package depends on image-magick, so r-animation should as
well. Also, add in texlive for LaTeX support.
* New package: r-magick
* Adjust line spaces in r-magick
* Add swftools dependenct to r-animation
* New package: swftools
This is needed bt r-animation
* Add 'when' clause to some package dependencies
- r-animation
- r-coin
- r-dt
- r-openssl
* New package: r-ellipsis
* New package: r-vctrs
* New package: r-zeallot
* New package: r-generics
* New package: r-cardata
* Add r-progress dependency to r-readxl
* New package: r-askpass
* New package: r-openxlsx
* New package: r-rio
* New package: r-sys
* New package: r-zip
* Add more updated packages
These are updates that have happened while working on this PR as well as
catching the ones from the cran.rstudio.com URL that were missed before.
* New package: r-gower
* New package: r-recipes
* New package: r-squarem
* New package: r-libcoin
* New package: r-rcmdcheck
* New package: r-remotes
* New package: r-sessioninfo
* New package: r-xopen
* New package: r-rgexf
* New package: r-rook
* New package: r-later
* New package: r-promises
* New package: r-xfun
* New package: r-urca
* New package: r-ggsignif
* New package: r-polynom
* New package: r-ucminf
* New package: r-ordinal
* New package: r-inum
* New package: r-debugme
* New package: r-fs
* New package: r-shinyfiles
* New package: r-gsa
* New package: r-nmof
* New package: r-dosnow
* New package: r-rann
* New package: r-reticulate
* New package: r-future
* New package: r-globals
* New package: r-listenv
* New package: r-future-apply
* New package: r-rsvd
* New package: r-sctransform
* New package: r-mitools
* Remove a stray FIXME line
* Fix typo in dependency for r-rcmdcheck
* Remove the dependency on r-splines
The r-splines package never existed in spack, but it does not exist on
CRAN either. There is an archive version from 1999 but it does not have
the proper extension format for modern R packages. The latest version
does not depend on r-splines, and apparently previous versions at least
built without it. Also, bump the required R version.
* Fix typo in r-rcpp dependency
* Fix typos in dependencies
- r-diagrammer
- r-janitor
- r-seurat
Also, bump minimum R version for r-rngtools.
* New package: r-clisymbols
* New package: r-fitdistrplus
* New package: r-gbrd
* New package: r-gh
* New package: r-ini
* New package: r-metap
* New package: r-npsurv
* New package: r-rdpack
* New package: r-snakecase
* New package: r-tinytex
* New package: r-usethis
* Make recommended changes
Made the changes that were recommended in the initial review.
- change cran.rstudio.com to cloud.r-project.org
- change R-project to r-project
- for packages with no listed homepage use the canonical link to the
package page
- for packages with a dependency constraint on R itself, specify the
dependency type
- add `list_url` where missing from package
* New package: r-hdf5r
This is needed for some older versions of r-seurat.
* Set R versions in packages
If the R version is specified in the DESCRIPTION file then set it in the
respective spack package.py file.
* Update var/spack/repos/builtin/packages/r-aer/package.py
Change dependency version of r-car.
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* Set constraint of mlbench dependency of r-adabag
* Set constraint on r-rcpp dependency of r-ape
* Removed "suggested" r-testthat from r-bibtex
* Update var/spack/repos/builtin/packages/r-bindrcpp/package.py
Fix dependency spec of r-bindr in r-bindrcpp.
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/r-blob/package.py
Add r-vctrs version constraint.
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* Remove r-base64enc dependency from r-callr
* Update var/spack/repos/builtin/packages/r-car/package.py
Set constraint on r-cardata dependency.
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* Remove unneeded dependencies from r-clipr
* Add gmake dependency to r-construct
* Set the proper homepage for r-crayon
* Add r-jsonlite as a dependency for r-crul
The jsonlite package moved from "suggests" to "imports" with 0.8.4.
* Remove accidental colon after package name
* Add version constraint to r-fpc dependency in r-dendextend
* Additional constraints for R version with r-digest
* Add r-jsonlite dependency for latest verion of r-dt
* Add r-htmltools dependency in r-dygraphs package
* Removed unneeded dependencies from r-fnn
* Remove unneeded dependencies from r-formatr
* Add version constraint for r-mvtnorm dependency in r-fpc
* Added gmake dependency to r-fs
* Add r-globals dependency in r-future-apply
* Add perl dependency to r-gdata
* Add openssl dependency for r-ggally
* Removed unneeded dependencies from r-globaloptions
* Update r-haven
- Add version constraint on r-forcats
- Add gmake build dependency
* Fixed gmake dependency
Gmake is a build only dependency.
* Apply suggestions from code review
Apply a batch of suggestions from Adam Stewart.
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* Remove unneeded dependencies from r-hoardr
* Fix r-htmlwidgets homepage
* Add gmake build dependency to r-httpuv
* Remove unneeded dependency from r-log4r
* Remove unneeded dependency from r-maldiquant
* Add gmake build dependency to r-minqa
* Remove unneeded dependency from r-mlbench
* Set constraint on R6 dependenvy of r-pbdzmq
* Set constraints on r-callr dependency of r-pkgbuild
* Remove unneeded dependency from r-nloptr
* Remove unneeded dependencies from r-pkgmaker
* Set R version constraint for r-raster
* Set version constraint on rcpp for r-rcppprorgess
* Added gmake build dependency
* Remove unneeded dependencies from r-rematch
* Remove unneeded dependency from r-plogr
* Add gmake build dependency for r-rcurl
* Apply suggestions from code review
Bring in more suggestions from Adam Stewart.
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* Remove cnpy dependency from r-rcppcnpy
The r-rcppcnpy package has its own modified copy of the cnpy source and
will build from that internal source. The cnpy dependency is therefore
unnecessary.
* Add comment to reconcile dependencies
The CRAN site lists Perl, Getopt::Long as a dependency. The Spack Perl
will have the Getopt::Long package installed so just depend on Perl.
* Add dependency on udunits2 with newer versions of r-units
* Set additional proj constraint for r-sf
Support for PROJ6 was added in r-sf-0.7-4.
* New package: pandoc
This package installs the pandoc and pandoc-citeproc binaries in order
to satisfy dependencies on pandoc until the Haskell framework is in
Spack.
* Add pandoc dependency to r-bookdown
* Add comment about MPI in r-ergm
* Add pandoc dependency for r-reprex
* Add proj constraints to r-rgdal dependencies
Support for PROJ6 was added in version 1.4-2.
* Modifications to r-rgl
- Rearranged the dependencies to be more consistent with other packages
- put the type last on the depends_on lines to be consistent with other
packages
- Added version constraints for some dependencies
- Added pandoc build dependency
* Be more accurate with rjsonio constraint for r-rgooglemaps
* Remove unneeded dependencies from r-rhmmer
* Tweak constraints for r-rjava
- Set java version constraint
- add gmake build dependency
* Add pandoc dependency to r-markdown
* Remove unneeded dependencies from r-rrcov
* Tweak r-rstan package
- remove duplicate specifications
- remove unneeded when conditions
- add version constraints
- arrange to follow order on CRAN page more closely
- add gmake build dependency
- add pandoc build dependency
* Add pandoc build dependency for r-rstantools
* Remove unneeded dependency from r-runit
* Remove unneeded dependencies from r-selectr
* Remove example R code from description
The example would module loading to break, at least in the case of Lmod
using TCL module files. It could be during the TCL to Lua conversion but
the module fails due to interpreting ipart of the example as a command.
* Update r-seurat
New version of r-seurat with new dependencies.
* New package: r-dqrng
* New package: r-leiden
* New package: r-rcppannoy
* New package: r-rcppparallel
* New package: r-rspectra
* New package: r-sitmo
* New package: r-uwot
* Remove unneeded dependency from r-snow
* Remove unneeded dependency from r-sourcetools
* Added pandoc build dependency for r-stanheaders
* Remove unneeded dependencies from r-taxizedb
* Remove unneeded dependencies from r-tclust
* Add dependency constraints for r-threejs
The following are needed for version 0.2.2:
- r-matrix
- r-jsonlite
* Remove unneeded dependencies from r-vfs
* Remove unneeded dependencies from r-vgam
* Remove unneeded dependency from r-xlconnectjars
* Remove unneeded dependency from r-xlsxjars
* Remove unneeded dependency from r-xnomial
* Remove ~mpi from fftw dependency of swftools
* Apply suggestions from code review
Add latest round of suggestions from Adam Stewart.
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* Fix rjsonio spec for r-rgooglemaps
The r-rjsonio spec is a when conditional.
* Rename 3 R.* packages
- r-utils --> r-r-utils (R.utils)
- r-oo --> r-r-oo (R.oo)
- r-methodss3 --> r-r-methodss3 (R.methodsS3)
Also, renamed dependencies in packages that depend on these three.
* Loosen version constraint on mariadb for r-rmysql
Make the mariadb constraint on mariadb-5.5 rather than the more
specific, and limiting, mariadb-5.5.56. This will allow an external
mariadb, such as mariadb-5.5.60 on CentOS-7.5 to be used. It also allows
for r-rmysql to be built against newer versions of the mariadb-5.5
series that might be added to spack.
* Convert to Autotools package
* dyninst and papi are now optional (off by default)
* limit dyninst version to < 10 (see
https://github.com/bsc-performance-tools/extrae/issues/30)
* Add numactl dependency
* Enable parallel installs for 3.7 and later
* Set EXTRAE_HOME in module files and for dependent package installs
* Generalize cxx11 support flag (previously it was using a specific
syntax and this updates it to use the cxx11 support flag for the
compiler in use).
* The install for kaldi was copying library symlinks but not the
actual library files, this makes sure to copy the libraries
* All libraries are installed to 'prefix.lib' (the original
library directory structure is no longer maintained)
* The install step for executables did not account for the different
dynamic library suffix on MacOS
e891cc4 updated the cairo package to make gobject support optional
and disabled it by default. gtkplus requires gobject support so this
explicitly enables +gobject on the cairo dependency of gtkplus.
Change the depends_on type from default (build + link) to just 'link'
for binutils and a few other packages. We don't use the binutils
utilities (only libs). On cori at NERSC (Cray), this was breaking the
build by covering up the system ld.
* Only apply issue-87.patch for versions before 1.2.3
* 1.2.3 builds fine with gcc@8:, but 1.2.2 and 1.2.2_p1 both fail
(with or without the patch) so the conflict is updated to exclude
only these two versions.
* Make mpi, scipy, petsc4py, and nlopt support optional
* Later versions depend on python@3.5:
* Versions before 0.4.1 must build with MPI: add a conflict for
@:0.4.1~mpi
Before this commit, CMake would still attempt to detect OpenMP, even
if RAJA were being installed with `spack install raja~openmp`, because
the option `ENABLE_OPENMP` is set to "On" by default. This commit
explicitly disables OpenMP when the Spack install spec contains
'~openmp`, ensuring that CMake does not attempt to detect and link
with OpenMP.
* esmf: add patch when building with intel for 7.0.x
* esmf: set Makefile variables required to propagate CXX/F90 flags
* ncl: add ymake patch for @6.4.0:
* ncl: add pixman, bzip2, freetype dependencies
* Add version 6.3.2 (which does not require patches like 6.1.5)
* Add +python variant to build Python bindings
* Option to build shared libraries does not exist for newer
versions including 6.3.2
* Update 'libs' property (library names are different for newer
versions)
* Add support to detect and build with MKL as blas provider
SEACAS is now using versions instead of just relying on always
installing master. There are now tagged versions.
The most recent version is the first that can be used with a
non-patched develop version of the CGNS package; previously, seacas
required that the CGNS library have some internally-developed patch
applied, but this is no longer needed.
Also, added support for adios2 package with the adios2 variant.
This currently defaults to off.
This variant (off by default) adds support for the kdreg option in
the GNI provider. It is disabled by default in order to avoid
potential runtime conflicts with the cray-mpich library. Only one
library at a time can use this feature.
This patch allows the libfabric package to work correctly out of
the box on systems like Cori at NERSC (since it's CLE7 update).
Otherwise the spack build may autodetect kdreg headers on the system
and enable this problematic feature.
* nlohmann-json: 3.7.0
The version 3.6.0 fix compile issues with GCC 9.0.
* nlohmann-json: proper test handling
tests are controlled via `spack install --test root|all ...`
instead of a variant.
This adds a special package type to Spack which is used to aggregate
a set of packages that a user might commonly install together; it
does not include any source code itself and does not require a
download URL like other Spack packages. It may include an 'install'
method to generate scripts, and Spack will run post-install hooks
(including module generation).
* Add new BundlePackage type
* Update the Xsdk package to be a BundlePackage and remove the
'install' method (previously it had a noop install method)
* "spack create --template" now takes "bundle" as an option
* Rename cmd_create_repo fixture to "mock_test_repo" and relocate it
to shared pytest fixtures
* Add unit tests for BundlePackage behavior
* new package: libglvnd
* remove virtual provides from libglvnd
libglvnd does not provide them directly, but
through implementations that depend on it.
* fix flake8 errors
* libglvnd: fix style/remove unecessary variants
* remove older libglvnd version
* explicitly enable all libglvnd stubs
* libglvnd: conflict with non-linux platform
* Choose a specific commit as a version (before, the only version was
the master branch)
* Add CMake patch which allows for building the version added here
(this replaces the existing patches for percept in Spack)
* Update trilinos dependency
