* combine all patches for 1612 into a single file, with additional
comments to explain the rational.
* Add kahip decomposition variant.
* Add support for ARM64 architecture.
* filter instead of patching etc/config.*/settings. This eliminates
patch files for 1706, perhaps for the future as well.
* URLs at or before version 1612 have a different structure, so
provide a url_for_version implementation to handle this
* singularity - added master branch as this has latest fixes - 2.4 does not compile on centos 6 without use of this branch
* renamed to develop
* added master branch properly
* add OctavePackage
1. remove import CudaPackage which is not needed anymore
2. mention CudaPackage and OctavePackage in packaging guide
3. adjust OctavePackageTemplate
4. add clue file for Octave build
5. sanity check on self.prefix
* use setup_environment
* esmf: put .mod files in the spack compiler search path
* esmf: allow building with Cray mpi
* esmf: create run-path dependent libraries on osx
* esmf: link fortran interface libraries when building with mpich
* Fix detection of blas and lapack: provide libraries/includes as
arguments to CMake rather than using CMake's auto-detection.
This includes a patch to QMCPACK's CMake files to refer to
Spack-built blas/lapack implementations. This also includes
special-case logic for the intel-mkl implementation of blas/lapack
* Break up unit tests and short tests. Only hard failure if the unit
tests fail, if short tests fail issue a warning only.
* Add QMCPACK 3.3.0, get rid of 3.0.0
- define MPICH_SKIP_MPICXX, link libmpich instead of libmpi
(as per disussion in PR #4990)
ENH: more flexible editing/patching of openfoam env files
CONFIG: comment out requirement for openmpi+thread_multiple
- was originally slated for the 1712 release and beyond, but there are
reportedly unstable version/network combinations.
Leave as comment for future reference, since it may be arise again.
STYLE: renamed openfoam-site.patch as 1706-site.patch (and reformatted)
- to preserve against impending changes in the layout of
config.{csh,sh}/settings
* fix post install method for py3 in mercurial
* Update package.py
* Update package.py
* use print_str instead of manual print detection
* Update package.py
* use only depends_on
* Update package.py
* Update package.py
State py3 compatibility for @4.3: according to setup.py from the 4.3.tar.gz from pypi
Add preferred version 2.0.3. Added beta version. Added conflict with
gcc versions >= 5 when building with cuda@8 (which is currently the
only supported cuda version). Added cuda architecture variant. Added
comment about current lack of cuda@9 support.
Fixes#6522
Patch psxevars.sh and psxevars.csh only when year > 2016.
pxevars.csh does not exist for versions before 2017. psxevars.sh
does not appear to require this patch for versions before 2017.
Fixes#6521.
Bazel's build system filters environment variables, including those
set by Spack for use by its compiler wrapper. This updates the patch
to include the SPACK_DEBUG_LOG_ID variable added in #5837.
* optional path to use spacks py-site-pkgs, install host-cfg for provenance
* add more comments and address review requests
* only use st-pkgs-dir when +python
* ascent does not need doxygen
* capture mpiexec if it exists
* added missing import
* flake8 fix
* default adios variant to False
* ascent develop now reqs conduit master
* optional path to use spacks py-site-pkgs, install host-cfg for provenance
* add more comments and address review requests
* only use st-pkgs-dir when +python
* ascent does not need doxygen
* capture mpiexec if it exists
* added missing import
* flake8 fix
* default adios variant to False
* ascent develop now reqs conduit master
* conduit: use hdf5 1.8 for wider output compat
* Add: Py-Plotly
The requirements of py-plotlit are rather strict fixed to specific
versions, so I did not add an "upper versions" `:` to the constrains.
See
https://github.com/plotly/plotly.py/blob/master/requirements.txt
* Py-Requests, Py-Six, Py-Pytz: Older Versions
Add two older versions of requests, pytz and six for plotly.
- depends on GTK+ with X enabled
(btw, non-X backends are deprecated/removed in GTK+)
- patch for 3.0.1-3.0.2: missing include caused multiple
`error: call of overloaded ‘abs(XYPOSITION)’ is ambiguous`
(seen in GCC 6.3.0); fixed in 3.0.3+
* Update CGNS to be able to be used in Trilinos.
* Updating Trilinos to be able to use CGNS.
* Fixing wrong cmake defines in trilinos for enabling cgns and cleaning up cgns package.
* Changing cgns parallel variant to mpi. Removing explicit dependence on parallel-netcdf in trilinos.
Add additional transform libraries to ADIOS.
Also modifies existing transforms to the versions they were
introduced (otherwise this was resulting in unknown configure flags).
* xsdk: Added MFEM rc package.
* xsdk: add version entry for xsdk-0.3.0-rc1 - and set it as preferred version
* xsdk: remove 'xsdk' from version - recommended by Todd.
Now the usage is:
'spack install xsdk@0.3.0-rc1'
instead of the previous usage:
'spack install xsdk@xsdk-0.2.0'
* xsdk: add petsc@3.8.0 as a dependency for xsdk-0.3.0-rc1
* mfem: fix dependency to use the corrected xsdk version
* Updated the mfem version tags.
* mfem: fix merge
* fix flake8 warning
* Modified xSDK scripts
* fixing the default package.yaml
* fix bad revert
* revert changes to superlu-dist so that the 5.2.1 update can be merged
* update xsdk to use superlu-dist-5.2.1
* update alquimia for xsdk
* fix whitespace
* update hypre for xsdk
* update sundials for xsdk
* update sundials for xsdk
* Fix checking for MKL and extend range of GCC versions
* pflotran: update to release branch
* plasma: fix spec -> self.spec
* Changes to enable mfem hooks into hypre, superlu-dist, and petsc. Sundials hooks may come in the future.
* adding plasma with comment
* Bumped the version of mfem up to handle integration with sundials3.0.0. Also enabled hypre in sundials.
* Turn on the plasma package definition for testing
* Fix conflict declaration to obey ordering rules
* xsdk: udate superlu-dist dependency to v5.2.2
* plasma: change gcc dependency to workarround potential spack bug #5778
* trilinos: update hdf5 dependency to use 'hdf5+hl'
Without this change - I get the following error [triggered by 161dca6d5c9810f808 changes]
$ ./bin/spack install trilinos+hdf5
==> Error: An unsatisfiable variant constraint has been detected for spec:
hdf5@1.10.1%gcc@7~cxx~debug~fortran~hl+mpi+pic+shared~szip~threadsafe arch=linux-fedora27-x86_64
while trying to concretize the partial spec:
netcdf+mpi
^m4
^mpich@3.3a2%gcc@7 device=ch3 +hydra netmod=tcp +pmi+romio~verbs arch=linux-fedora27-x86_64
^zlib@1.2.11%gcc@7+optimize+pic+shared arch=linux-fedora27-x86_64
netcdf requires hdf5 variant +hl, but spec asked for ~hl
* plasma: add in -lm dependency per #6046
* update sundials version to 3.0.0
* Add fixes to support Netlib LAPACK
* mfem does not use cmake for builds [anymore] - so remove code corresponding to this dependency.
This enables mfem build on OSX [with xcode/clang compilers]
* mfem: update to v3.3.2-rc4
* add patch for building sundials on mac
* xsdk: enable plasma for gcc-4.9+ - same as what plasma/package.py does.
* magma: Fix for cuda-9.0 as it does not support sm20
nvcc fatal : Unsupported gpu architecture 'compute_20'
* add in code for 'spack install xsdk+cuda' - which installs magma
* fix flake8 warning
* fix flake8 warnings
* Updated to the latest MFEM RC.
* alquimia: fix to use petsc-3.8.0+ versions
* petsc: update to version 3.8.1
* petsc: add in conflict between petsc-3.8.0 & mkl
* xsdk: update petsc to 3.8.1 to get MKL build fix
* petsc: fix superlu_dist dependency
* petsc: when hdf5 depends on zlib - petsc+hdf5 should also be configured with zlib
* petsc: fix dependency [of zlib to be on hdf5 - and not on petsc]
* petsc: fix pkgconfig error - with incorrect library link order that can break mfem examples with static build
* petsc: use the fact that hdf5/package.py has a hard dependency on zlib [so no need to check for this dependency in code]
recommended-by: @davydden
* petsc: change hdf5 dependency to 'hdf5+hl' as petsc configure is looing for -lhdf5_hl
https://github.com/spack/spack/issues/5846
* plasma: also detect -lgfortran
* update sundials version to 3.1.0
* alquimia: xsdk-0.3.0-rc -> xsdk-0.3.0
* petsc: update to version 3.8.2
Includes pkgconfig fix [for mfem static build failure]
* Revert "petsc: fix pkgconfig error - with incorrect library link order that can break mfem examples with static build"
This reverts commit d1afa8c20d4313fdc42a27e5380573b035b32998.
* xsdk: update to use petsc-3.8.2
* Fixed a problem with MFEM trying to use mpicxx instead of the spack defined compiler.
* Minor changes to the mfem build and pointing at mfem's release branch that is currently undergoing internal testing.
* Enabling shared build for Plasma
* plasma: do not look for libgfortran on cray - spack finds the wrong one from the frontend
'-L/usr/lib64/gcc/x86_64-suse-linux/4.3 -L/usr/lib64 -lgfortran'
* Some changes to the mfem package that are in the process of being pulled into spack/develop.
* xsdk: switch from 0.3.0-rc1 to 0.3.0
* fix flake8 warnings
* plasma: extract plasma changes from xsdk-0.3.0
* plasma: cleanup per review
- netlib-lapack: add support for spec['lapack:c'].libs, spec['blas:c'].libs
- add getblaslapacklibs() to eliminate duplicate code in edit() and build_targets()
- eliminate string manipulation of ld_flags
- remove gfortran check (will check later)
- remove build() (will check later)
* netlib-lapack: fix tuple per review
* netlib-lapack: use spec[lapack:c,fortran]
* Adding version 2.4.3 to ViennaRNA
* Replaced tab indent with spaces
Flake8 error correction
* no swig for viennarna v2.4.3 only
* correcting version/argument conditional syntax error
libtool is also needed for linking, otherwise downstream
dependencies such as clfft will fail linking against pocl's
libOpenCL.so with errors such as:
```
>> 182 /usr/bin/ld: warning: libltdl.so.7, needed by /usr/local/opt/spack/linux-ubuntu16.04-x86_64/gcc-5.4.0/pocl-0.14-rwo73qzkcxfupndxoz3pcl2s34o5pt6i/lib/libOpenCL.so, not found (try using -rpath or -rpath-link)
>> 183 /usr/local/opt/spack/linux-ubuntu16.04-x86_64/gcc-5.4.0/pocl-0.14-rwo73qzkcxfupndxoz3pcl2s34o5pt6i/lib/libOpenCL.so: undefined reference to `lt_dlinit'
>> 184 /usr/local/opt/spack/linux-ubuntu16.04-x86_64/gcc-5.4.0/pocl-0.14-rwo73qzkcxfupndxoz3pcl2s34o5pt6i/lib/libOpenCL.so: undefined reference to `lt_dlerror'
>> 185 /usr/local/opt/spack/linux-ubuntu16.04-x86_64/gcc-5.4.0/pocl-0.14-rwo73qzkcxfupndxoz3pcl2s34o5pt6i/lib/libOpenCL.so: undefined reference to `lt_dlopen'
>> 186 /usr/local/opt/spack/linux-ubuntu16.04-x86_64/gcc-5.4.0/pocl-0.14-rwo73qzkcxfupndxoz3pcl2s34o5pt6i/lib/libOpenCL.so: undefined reference to `lt_dlsym'
>> 187 collect2: error: ld returned 1 exit status
```
