Fixes#11816
Allow packages to refer to non-expanded downloads (e.g. a single
script) using Stage.archive_file. This addresses a regression from
#11688 and adds a unit test for it.
This change reverts to the previous behavior of only looking for pgcc
and friends, not pgcc-llvm and friends.
The llvm variant doesn't support all the same features as the
traditional variant of the pgi code generator; this change avoids
treating the llvm variant as a default pgi compiler.
This retains the changes in #10704 which accept the "LLVM" suffix of
the version string of the PGI compiler, which allows users to
explicitly add the llvm-pgi compiler if desired.
For resources, it is desirable to use the expanded archive name of
the resource as the name of the directory when adding it to the root
staging area.
#11528 established 'spack-src' as the universal directory where
source files are placed, which also affected the behavior of
resources managed with Stages.
This adds a new property ('srcdir') to Stage to remember the name of
the expanded source directory, and uses this as the default name when
placing a resource directory in the root staging area.
This also:
* Ensures that downloaded sources are archived using the expanded
archive name (otherwise Spack will not be able to determine the
original directory name when using a cached archive).
* Updates working_dir context manager to guarantee restoration of
original working directory when an exception occurs
* Adds a "temp_cwd" context manager which creates a temporary
directory and sets it as the working directory
The regression test for #11678 fails on at least some Mac OS systems
because they have a /usr/bin/gcc that is secretly clang.
This PR replaces the dependency on a system gcc executable with a
test-generated script that generates the expected output for the
compiler logic.
Some tests introduced in #11528 temporarily set the user's `config:build_stage`, which affected (or created) a config.yaml file in the user's `$HOME/.spack` directory that could leave entries behind if the tests fail.
This change ensures only temporary configuration files are used/affected by these tests.
The "spack location" command was previously untested. This also adds
a check to ensure that composite Stages can report whether they were
expanded (this property was previously only recorded in Stage but not
in CompositeStage).
DIYStage, used to treat a user-managed directory as a staging area,
should always be considered expanded (i.e. the source has been
decompressed if it was stored in an archive).
This also:
* Adds checks to ensure that the path used to instantiate a
DIYStage refers to an existing directory.
* Adds tests to check the behavior of DIYStage (including behavior
added here, but it was generally untested before).
#11528 updated Stage to always store a Package's source in a fixed
directory accessible via `Stage.source_path` This left behind a
number of packages which were expecting to access the source code
via `Stage.path`. This Updates those packages to use
`Stage.source_path` instead.
This also updates the name of the fixed directory: The original name
of the fixed directory was "src", so if an expanded archive created a
"src" directory, then users inspecting the directory structure could
see paths like "src/src" (which wasn't wrong but could be confusing).
Therefore this also updates the name of the fixed directory to
"spack-src".
Fixes#11678
`spack compiler find` was not searching `PATH` when provided with no
arguments. ea7910a updated the API for the search function and the
command logic did not update how it called this function. This also
adds a test to ensure that `spack compiler find` will collect
compilers from `PATH`.
"spack module tcl find -r <spec>" (and equivalents for other module
systems) was failing when a dependency was installed in an upstream
Spack instance. This updates the module index to handle locating
module files for upstream Spack installations (encapsulating the
logic in a new class called UpstreamModuleIndex); the updated index
handles the case where a Spack installation has multiple upstream
instances.
Note that if a module is not available locally but we are using the
local package, then we shouldn't use a module (i.e. if the package is
also installed upstream, and there is a module file for it, Spack
should not use that module). Likewise, if we are instance X using
upstreams Y and Z like X->Y->Z, and if we are using a package from
instance Y, then we should only use a module from instance Y. This
commit includes tests to check that this is handled properly.
Spack currently tries to unify everything in the DAG, but this is too strict for build dependencies, where it is fine to build a dependency with a tool that conflicts with a version fo that tool for a dependent's build.
To enable a workaround for conflicts among build dependencies, so that users can install in multiple steps to avoid these conflicts, make the following changes:
* Dont apply package dependency constraints for build deps of installed packages
* Avoid applying constraints for installed packages vs. concrete packages
* Mark all dependencies of installed packages as visited in normalization method
* don't remove dependency links for concrete specs in flat_dependencies
Also add tests:
* Update test to ensure that link dependencies of installed packages have constraints applied
* Add test to check for proper handling of transitive dependencies (which is currently not the case)
- spack.compilers.find_compilers now uses a multiprocess.pool.ThreadPool to execute
system commands for the detection of compiler versions.
- A few memoized functions have been introduced to avoid poking the filesystem multiple
times for the same results.
- Performance is much improved, and Spack no longer fork-bombs the system when doing a `compiler find`
- We use `spack list --foramt=html` now, as it is much faster and doesn't
make the docs build take forever.
- Remove `spack list --format=rst` as it is no longer used.
- `stage.source_path` was previously overloaded; it returned `None` if it
didn't exist and this was used by client code
- we want to be able to know the `source_path` before it's created
- make stage.source_path available before it exists.
- use a well-known stage source path name, `$stage_path/src` that is
available when `Stage` is instantiated but does not exist until it's
"expanded"
- client code can now use the variable before the stage is created.
- client code can test whether the tarball is expanded by using the new
`stage.expanded` property instead of testing whether `source_path` is
`None`
- add tests for the new source_path semantics
- make tty.msg, tty.info, etc. print the exception type and stringified
message if the message argument is an exception.
- simplify parts of the code that call tty.debug(str(e))
- add extra tty.debug statements in places where exceptions were
previously ignored
- `spack graph --static` (and `spack.graph.dot_graph`) now do the "right
thing" and print the possible dependency graph of provided packages.
- `spack graph --static` no longer concretizes specs, as it only relies
on class level metadata
- Previously the behavior was not consistent -- `spack graph --static`
would graph possible dependencies of concrete specs, but would only
include some of them. The new code properly pursues all possible
dependencies, and allows traversing by different dependency types.
- `spack dependencies` can now take a --deptype argument to only traverse
particular deptypes
- add a new "common" argument for deptype in spack.cmd.common.arguments
- Database.installed_relatives() can now also take a deptype argument
- this is used by `spack dependencies --installed`
- `PackageBase.possible_dependencies` now:
- accepts a deptype param that controls dependency types traversed
- returns a dict mapping possible depnames to their immediate possible
dependencies (this lets you build a graph easily)
- Add tests for PackageBaes
- The 'name' attribute for packages was being set in DirectiveMeta, which
wasn't consistent with other class properties (like fullname, etc.)
- Move it to be a class property of `PackageMeta`, and add the
corresponding property method wrapper on `PackageBase`
* add c99_flag, c11_flag to compiler class
* implement c99_flag, c11_flag for gcc
* implement c99_flag, c11_flag for arm
* implement c99_flag for cce
* implement c99_flag, c11_flag for clang
* implement c99_flag, c11_flag for intel
* implement c99_flag, c11_flag for xl
Previously, module files were not set with the same permissions as the package installation. For world-readable packages, this would not cause a problem. For group readable packages, it does:
```
packages:
mypackage:
permissions:
group: mygroup
read: group
write: group
```
In this case, the modulefile is unreadable by members of the group other than the one who installed it. Add logic to the modulefile writers to set the permissions based on the configuration in `packages.yaml`
* Build cache: relocate path to spack/bin/sbang in text files.
* Found in testing.
* update packaging test
* Make sbang replacement including #!/bin/bash. Add an additional spack prefix replacement to fix stage directory references.
* flake8
* Use buildinfo.get() so old buildcaches without buildinfo['spackprefix'] can be read.
* config:build_jobs now controls the number of parallel jobs to spawn during
builds, but cannot ever exceed the number of cores on the machine.
* The default is set to 16 or the number of available cores, whatever
is lowest.
* Updated docs to reflect the changes done to limit parallel builds
- `gettext_uuid=True` makes every commit update every .pot file in spack/localized-docs,
and speeds up the internationalized doc build slightly.
- Optimize for less repository churn, and use `python-levenshtein` to accelerate
the build instead.
- make all Spack paths relative to a `_spack_root` symlink, so that we
can easily relocate the docs build *outside* lib/spack/docs
- set some useful defaults for gettext translation variables in conf.py
- update `relativeinclude` and other references to the spack root in the
RST files to use _spack_root
- Add a `--update FILE` option to `spack list`
- Output is written to the file only if any package is newer than the file
- Simplify the code in docs/conf.py using this new option
The Spack documentation currently hard-codes some functionality in
`conf.py`, which makes the doc build less "pluggable" for things like
localized doc builds.
In particular, we unconditionally generate an index of commands and a
package list as part of the docs, but those should really only be done if
things are not up to date.
This commit does the following:
- Add `--header` option to `spack commands` so that it can do the work of
prepending text to its output.
- Add `--update FILE` option to `spack commands` that makes it generate a
new command index *only* if FILE is out of date w.r.t. commands in the
Spack source.
- Simplify code in `conf.py` to use these options and only update the
command index when needed.
This PR implements several refactors requested in #11373, specifically:
- Config scopes are used to handle builtin defaults, command line overrides
and package overrides (`parallel=False`)
- `Package.make_jobs` attribute has been removed; `make_jobs` remains
as a module-scope variable in the build environment.
- The use of the argument `-j` has been rationalized across commands
- move '-j'/'--jobs' argument into `spack.cmd.common.arguments`
- Add unit tests to check that setting parallel jobs works as expected
- add new test to ensure that build job setting is isolated to each build
- Fix packages that used `Package.make_jobs` (i.e. `bazel`)
* Add Fujitsu compiler to Spack.
* Fixes for flake8
* Chenges location of FCC to subdirectory called case-insensitive
* Add compiler tests for Fujitsu compiler
* Modify the logic of taking compiler version for new version of Fujitsu compiler
The regex used for finding the Cray OS version from the PrgEnv-cray
module was not exact and was at times pulling the version from other
PrgEnv modules. This updates the regular expression to be more exact.
Adds executable=/bin/bash into Popen. We discovered this bug while
working in a csh/tsch environment. By executing with /bin/bash we ensure
that the module command works.
#8612 added command extensions to Spack: a command implemented in a
separate directory. This improves the implementation by allowing
the command to import additional utility code stored within the
established directory structure for commands.
This also:
* Adds tests for command extensions
* Documents command extensions (including the expected directory
layout)
- `svn info` prints different results depending on the system locale
- in particular, Japanese output doesn't contain "Revision:"
- Change Spack code to use XML output instead of using the human output
Add fixes to support multiple installs and dependents using a subset
of IntelPackage functionality.
* Update IntelPackage to only return scalapack libraries if the root
spec depends on MPI: scalapack requires MPI to be mentioned as a
dependency in the DAG. Package builds using intel-mkl for its
blas/lapack implementations but not for scalapack were failing to
build.
Ideally it would be possible to ask if any of the packages in the
DAG are actually requesting the scalapack functionality provided by
the IntelPackage and only return scalapack libs in that case, but
that is not easily done at this time.
Fixes#11314Fixes#11289
* set HOME when the intel silent installer is run. This prevents the
installer from using the ~/intel directory (which can cause
conflicts for multiple installs of the same IntelPackage)
Fixes#9713
Use new `module` function instead of `get_module_cmd`
Previously, Spack relied on either examining the bash `module()` function or using the `which` command to find the underlying executable for modules. More complicated module systems do not allow for the sort of simple analysis we were doing (see #6451).
Spack now uses the `module` function directly and copies environment changes from the resulting subprocess back into Spack. This should provide a future-proof implementation for changes to the logic underlying the module system on various HPC systems.
Add two functions to the EnvironmentModifications object to help
users sanitize environment variables in their package definitions:
* deprioritize_system_paths: this keeps system paths in the
environment variable but moves them to the end.
* prune_duplicate_paths: remove any duplicate paths from the
variable
This includes testing for the new functions as well as for
(previously-untested) old convenience functions for environment
variable manipulation.
This also adds special handling for bash functions so they
will be defined when the exported environment file is sourced.
Fixes#11335
Update the Spack compiler wrappers to add the headerpad_max_install_names
linker flag on MacOS. This allows the install_name_tool to rewrite
the RPATH entry of the binary to be longer if needed. This is
primarily useful for creating and distributing binary caches of
packages (i.e. using the "spack buildcache" command); binary caches
created on MacOS before this commit may not successfully relocate
(if the target root path is larger).
* Added a function that concretizes specs together
* Specs concretized together are copied instead of being referenced
This makes the specs different objects and removes any reference to the
fake root package that is needed currently for concretization.
* Factored creating a repository for concretization into its own function
* Added a test on overlapping dependencies
* extend Version class so that 2.0 > 1.develop > 1.1
* add concretization tests, with preferences and preferred version.
* add master, head, trunk as develop-like versions, develop > master > head > trunk
* update documentation on version comparison
- `spack edit` previously used `spack.util.executable` `Executable` objects,
and didn't `exec` the editor like you'd expect it to
- This meant that Spack was still running while your editor was, and
stdout/stdin were being set up in weird ways
- e.g. on macOS, if you call `spack edit` with `EDITOR` set to the
builtin `emacs` command, then type `Ctrl-g`, the whole thing dies with
a `==> Error: Keyboard interrupt`
- Fix all this by changing spack.util.editor to use `os.execv` instead of
Spack's `Executable` object
Also add constructor to NoLibrariesError which can either take an
error message (like other SpackErrors) or a name and prefix (in
which case the error message is constructed).
PR #10758 made a slight change to find_versions_of_archive() which included
archive_url in the search process. While this fixed `spack create` and
`spack checksum` missing command-line arguments, it caused `spack
install` to prefer those URLs over those it found in the scrape process.
As a result, the package url was treated as a list_url causing all R
packages to stop fetching once the package was updated on CRAN.
This patch is more selective about including the archive_url in the
remote versions, explicitly overriding it with matching versions found
by the scraper.
f242f5f8 changed the format strings but maintained backwards
compatibility in all cases except one: The list of valid tokens for
the module naming schemes was not updated properly to contain both
the new and old styles for compilers and package names.
This PR re-adds the old tokens into the list of valid tokens.
#11152 added documentation for #8772 but some details were based on
an earlier implementation that had changed by the time #8772 was
merged. In particular, #11152 mentioned that upstream Spack instances
were configured in config.yaml, when in fact they should be placed in
a separate upstreams.yaml config file; this PR updates the
documentation accordingly.
fixes#11159
The 'namespace' argument to both Repo and RepoPath were used to set the
"super namespace". Currently it seems to be vestigial as the only
"super namespace" allowed for packages is 'spack.pkg' since 39c9bbf
* Make a separate CDash report for each package installed
Previously, we generated a single CDash report ("build") for the complete results
of running a `spack install` command. Now we create a separate CDash build for
each package that was installed.
This commit also changes some of the tests related to CDash reporting.
Now only one of the tests exercises the code path of uploading to a
(nonexistent) CDash server. The rest of the related tests write their reports
to disk without trying to upload them.
* Don't report errors to CDash for successful packages
Convert errors detected by our log scraper into warnings when the package
being installed reports that it was successful.
* Report a maximum of 50 errors/warnings to CDash
This is in line with what CTest does. The idea is that if you have more than
50 errors/warnings you probably aren't going to read through them all anyway.
This change reduces the amount of data that we need to transfer and store.
* Update spec format to simpler syntax, maintain backwards compatibility
* Switch to new spec.format method throughout internals
* update package files for new format strings
* documentation and minor code cleanup. removed nonsensical variant sigils
Fixes#11070#11010
Spack attempts to intercede on behalf of all compiler invocations for
a build. This involves adding its wrappers to PATH. Cray systems
include a "ftn" executable and Spack was only redirecting this call
when the Spec was built with cce. This updates the compiler wrappers
to add "ftn" in all cases.
The default (implied) behavior for all environments, as of ea1de6b,
is that an environment will maintain a view in a location of its
choosing. ea1de6b explicitly recorded all three possible states of
maintaining a view:
1. Maintain a view, and let the environment decide where to put it
(default)
2. Maintain a view, and let the user decide
3. Don't maintain a view
This commit updates the config writer so that for case [1], nothing
will be written to the config.yaml. This will not change any existing
behavior, it just serves to keep the config more compact.
Compilers are treated separately from other dependencies in Spack.
#10761 added the option to automatically install compilers when a
package specifies using a compiler that is not available in Spack.
However, this did not work correctly for dependency packages (it
would only build a compiler for the root of an install DAG). This
commit enables the building of compilers for dependency packages.
Environments are nowm by default, created with views. When activated, if an environment includes a view, this view will be added to `PATH`, `CPATH`, and other shell variables to expose the Spack environment in the user's shell.
Example:
```
spack env create e1 #by default this will maintain a view in the directory Spack maintains for the env
spack env create e1 --with-view=/abs/path/to/anywhere
spack env create e1 --without-view
```
The `spack.yaml` manifest file now looks like this:
```
spack:
specs:
- python
view: true #or false, or a string
```
These commands can be used to control the view configuration for the active environment, without hand-editing the `spack.yaml` file:
```
spack env view enable
spack env view envable /abs/path/to/anywhere
spack env view disable
```
Views are automatically updated when specs are installed to an environment. A view only maintains one copy of any package. An environment may refer to a package multiple times, in particular if it appears as a dependency. This PR establishes a prioritization for which environment specs are added to views: a spec has higher priority if it was concretized first. This does not necessarily exactly match the order in which specs were added, for example, given `X->Z` and `Y->Z'`:
```
spack env activate e1
spack add X
spack install Y # immediately concretizes and installs Y and Z'
spack install # concretizes X and Z
```
In this case `Z'` will be favored over `Z`.
Specs in the environment must be concrete and installed to be added to the view, so there is another minor ordering effect: by default the view maintained for the environment ignores file conflicts between packages. If packages are not installed in order, and there are file conflicts, then the version chosen depends on the order.
Both ordering issues are avoided if `spack install`/`spack add` and `spack install <spec>` are not mixed.
When providing a track, the cdash reporter will format the stamp
itself, as it has always done, and register the build during the
package installation process. When providing a stamp, it should
first be formatted as cdash expects, and then cdash will be sure
to report results to same build id which was registered manually
elsewhere.
* Update Spec.prefix to have special case for 'None' in database path; regression test
* Update in database reader rather than spec
* Change assertion to conditional + raise
* Added test for concrete check in Spec.prefix
The module_parsing test checks whether the module function is available
by looking for the string 'not found'. If the user has set a different
locale, the test can assume that the module function is available when
it actually is not.
* Split get_compiler_version into two functions:
get_compiler_version_output runs the compiler with the relevant
option to print the version; extract_version_from_output determines
the version by examining this output. This makes it easier to test
the customized version detection for each compiler. Users can
customize this by overriding the following:
* version_argument: this is the argument that tells the compiler to
print its version. It assumes that the compiler will report its
version if invoked with a single option (like "--version")
* version_regex: the regular expression used to extract the version
from the compiler argument. This assumes that a regular
expression is sufficient to extract the version, and that the
version can be extracted from a single capture group (Spack uses
the first capture group)
* default_version: allows you to completely override all version
detection logic
* get_compiler_version_output: if getting the compiler to report
its version is more complex than invoking it with a single arg
* extract_version_from_output: if it is difficult to define a regex
that can be used to extract the version from the output
* Added tests for version detection of most compilers
* Removed redundant code from xl_r compiler class (by inheriting
from xl compiler definition)
Replace the original implementation of the "memoized" decorator with
an implementation that exposes the docstring and arguments of the
wrapped function. This is achieved using functools.wraps.
This provides a mechanism to implement a new Spack command in a
separate directory, and with a small configuration change point Spack
to the new command.
To register the command, the directory must be added to the
"extensions" section of config.yaml. The command directory name must
have the prefix "spack-", and have the following layout:
spack-X/
pytest.ini #optional, for testing
X/
cmd/
name-of-command1.py
name-of-command2.py
...
tests/ #optional
conftest.py
test_name-of-command1.py
templates/ #optional jinja templates, if needed
And in config.yaml:
config:
extensions:
- /path/to/spack-X
If the extension includes tests, you can run them via spack by adding
the --extension option, like "spack test --extension=X"
* initial work to make use of an 'upstream' spack installation: this uses the DB of the upstream installation to check if a package is installed
* need to query upstream dbs when adding new record to local db
* prevent reindexing upstream DBs
* set prefix on specs read from DB based on path stored in install record
* check that Spack does not install packages that are recorded as installed in an upstream db
* externals do not add their path to install records - need to use 'external_path' to get path of upstream externals
* views need to check for upstream installations when linking metadata
* package and spec now calculate upstream installation properties on-demand themselves rather than depending on concretization to set these properties up-front. The added tests for upstream installations don't work with this new strategy so they need to be updated
* only refresh modules for local specs (not those in upstream packages); optionally generate local module files for packages installed upstream
* when a user tries to locate a module file for a package installed upstream, tell them to use the upstream spack instance to locate it
* support recursive upstream databases (allow upstream databases to use their own upstream databases)
* separate upstream config into separate file with its own schema; each entry now also includes a name
* metadata_dir is no longer customizable on a per-instance basis for YamlDirectoryLayout
* treat metadata_dir as an instance variable but dont set it from kwargs; this follows several other hardcoded variables which must be consistent between upstream and downstream DBs. Also update DirectoryLayout.metadata_path to work entirely with Spec.prefix, since Spec.prefix is set from the DB when available (so metadata_path was duplicating that logic)
Change the location of the CMake build area from the staged source
directory to the stage base directory.
This change allows CMake packages to refer to the build directory in
setup_environment (e.g. if tests need to have a directory in PATH):
Staging happens after the call to setup_environment(), and if the
stage area does not exist, then spec.stage.source_path returns None.
To accommodate this change, archived files (like config.log for
Autotools packages) are archived relative to the stage base directory
rather than the expanded source directory.
Other packages (those not using CMake) will still use the staged
source directory as the default working directory for builds (and
will still be unable to reference this directory in
setup_environment())
When multiple instances of environment-modules were installed with
different architectures, Spack was not retrieving the installation
appropriate for the current architecture when finding the module
prefix.
* Fixed some issues with CUDA-Intel compiler conflicts.
* Comment about expressing CUDA-compiler conflicts.
* More precise conflicts and also add support for Intel 19.0
If the user has set the environment variable VISUAL, it will be used
in preference to EDITOR for all Spack editing activities. If VISUAL
is not set or fails (perhaps due to a lack of graphical editing
capabilities),EDITOR will be used instead. We fall back to one of
several common editors if neither bears fruit.
This feature has been tailored to:
* Provide identical behavior to the previous implementation in the
case that VISUAL is not set.
* Not require any change to code utilizing the editor feature.
* Follow usual UNIX behavior concerning VISUAL and EDITOR.
* Fix clearing EnvironmentModifications with python2
* Add EnvironmentModifications::clear unit test
Use re-assignment rather than del to clear array
* Fix flake issues
Fixes#10191
* Add more regular expressions to detect clang versions that were
not being picked up
* Add a test for parsing versions from the output of Clang (this
does not run Clang, but rather uses example outputs from Clang)
* Separate Clang version parsing into its own method (to make it
easier to test)
Currently, only C headers are considered, causing build failures for
packages depending on, e.g., netcdf-fortran and xerces-c. Additionally,
the regex used to look for the include path component did not consider
word boundaries, causing false matches.
* Create option to build missing compilers and add them to config before installing packages that use them
* Clean up kwarg passing for do_install, put compiler bootstrapping in separate method
* Rework of buildcache creation and install prefix checking using the functions introduced in
https://github.com/spack/spack/pull/9199
Instead of replacing rpaths with placeholder and then checking strings, make use of the functions
relocate.is_recocatable and relocate.is_file_relocatable to decide if a package needs the allow-root option.
This fixes a problem where the placeholder path was not in the first rpath entry. This was seen in c++ libraries and binaries because the compiler was outside the spack install base path and always appears first in the rpath.
Instead of checking the first rpath entry, all rpaths have the placeholder path and the old install path (if it exists) replaced with the new install path.
* flake8
* Added the `spack buildcache preview` sub-command
This is similar to `spack spec -I` but highlights which nodes in a DAG
are relocatable and which are not.
spec.tree has been generalized a little to accept a status function,
instead of always showing the install status
The current implementation works only for ELF, and needs to be
generalized to other platforms.
* Added a test to check if an executable is relocatable or not
This test requires a few commands to be present in the environment.
Currently it will run only under python 3.7 (which uses Xenial instead
of Trusty).
* Added tests for the 'buildcache preview' command.
* Fixed codebase after rebase
* Fixed the list of apt addons for Python 3.7 in travis.yaml
* Only check ELF executables and shared libraries. Skip checking virtual or external packages. (#229)
* Fixed flake8 issues
* Add handling for macOS mach binaries (#231)
The environment modules package has been updated to include
versions up to 4.0.0. The url of the package and the homepage
have been updated accordingly.
The `spack bootstrap` command now builds version 3.2.10 of
the environment-modules package, and will do until #10708
is fixed.
This restores the use of Package.headers when computing -I options
for building a package that was added in #8136 and reverted in
#10604. #8136 used utility logic that located all header files in
an installation prefix, and calculated the -I options as the
immediate roots containing those header files.
In some cases, for a package containing a directory structure like
prefix/
include/
ex1.h
subdir/
ex2.h
dependents may expect to include ex2.h relative to 'include', and
adding 'prefix/include/subdir' as a -I was causing errors,
in particular if ex2.h has the same name as a system header.
This updates header utility logic to by default return the base
"include" directory when it exists, rather than subdirectories.
It also makes it possible for package implementers to override
Package.headers to return the subdirectory when it is required
(for example with libxml2).
Spack warns users when a dependency package updates CPATH. This
warning message is generating bug reports and alarm in cases where
there is no problem. For now this downgrades the warning message to
the debug level, so it only shows up if something goes wrong for the
user and they ask for more information from Spack.
This spack command adds a new schema for a file which describes the
builder containers available, along with the compilers availabe on
each builder. The release-jobs command then generates the .gitlab-ci.yml
file by first expanding the release spec set, concretizing each spec
(in an appropriate docker container if --this-machine-only argument is
not provided on command line), and then combining and staging all the
concrete specs as jobs to be run by gitlab.
Adds four new sub-commands to the buildcache command:
1. save-yaml: Takes a root spec and a list of dependent spec names,
along with a directory in which to save yaml files, and writes out
the full spec.yaml for each of the dependent specs. This only needs
to concretize the root spec once, then indexes it with the names of
the dependent specs.
2. check: Checks a spec (via either an abstract spec or via a full
spec.yaml) against remote mirror to see if it needs to be rebuilt.
Comparies full_hash stored on remote mirror with full_hash computed
locally to determine whether spec needs to be rebuilt. Can also
generate list of specs to check against remote mirror by expanding
the set of release specs expressed in etc/spack/defaults/release.yaml.
3. get-buildcache-name: Makes it possible to attempt to read directly
the spec.yaml file on a remote or local mirror by providing the path
where the file should live based on concretizing the spec.
4. download: Downloads all buildcache files associated with a spec
on a remote mirror, including any .spack, .spec, and .cdashid files
that might exist. Puts the files into the local path provided on
the command line, and organizes them in the same hierarchy found on
the remote mirror
This commit also refactors lib/spack/spack/util/web.py to expose
functionality allowing other modules to read data from a url.
- add CombinatorialSpecSet in spack.util.spec_set module.
- class is iterable and encaspulated YAML parsing and validation.
- Adjust YAML format to be more generic
- YAML spec-set format now has a `matrix` section, which can contain
multiple lists of specs, generated different ways. Including:
- specs: a raw list of specs.
- packages: a list of package names and versions
- compilers: a list of compiler names and versions
- All of the elements of `matrix` are dimensions for the build matrix;
we take the cartesian product of these lists of specs to generate a
build matrix. This means we can add things like [^mpich, ^openmpi]
to get builds with different MPI versions. It also means we can
multiply the build matrix out with lots of different parameters.
- Add a schema format for spec-sets
Fixes#10617Fixes#10624Closes: #10619#8136 dependended entirely on spec.libs to retrieve library directories
from dependencies. By default this function only retrieves libraries if
their name is something like lib<package> (e.g. "libfoo.so" for a
package called "Foo"). This unconditionally adds lib/lib64 directories
for each dependency as link/rpath directories.
This also filters system paths from link/rpaths/include directories and
removes duplicated paths that #8136 could add.
If the -f <specyamlfile> argument to install is used (rather than
providing package specs on the command line), CDash throws an exception
due to missing the installation command (the packages targeted for
install). This fixes that behavior so CDash reporting succeeds in
either case.
fixes#10601
Due to a bug this attribute is wrong for packages that use directories
as namespaces. For instance it will add "<boost-prefix>/include/boost"
instead of "<boost-prefix>/include" to the include path.
As a minor addition a few loops in the compiler wrappers have been
simplified.
Fixes#7855Closes#8070Closes#2645
When searching for library directories (e.g. to add "-L" arguments to
the compiler wrapper) Spack was only trying the "lib/" and "lib64/"
directories for each dependency install prefix; this missed cases
where packages would install libraries to subdirectories and also was
not customizable. This PR makes use of the ".headers" and ".libs"
properties for more-advanced location of header/library directories.
Since packages can override the default behavior of ".headers" and
".libs", it also allows package writers to customize.
The following environment variables which used to be set by Spack
for a package build have been removed:
* Remove SPACK_PREFIX and SPACK_DEPENDENCIES environment variables as
they are no-longer used
* Remove SPACK_INSTALL environment variable: it was not used before
this PR
* fix permission setter
Fix a typo in islink test when applied to files.
* os.walk explicitly set not to follow links
The algorithm strongly rely on not following links.
* Note that `none` is the default for lmod autoload
Save a bit of confusion by *explicitly* pointing out that `none` is
the default value for autoload in the lmod module file generator.
* Add a tip re building software externally
Add a tip about using `autoload: all` when building packages outside
of the tree that use artifacts (e.g. libraries, includes) within the
tree.
CMake supports the notion of secondary generators which provide extra
information to (e.g.) IDEs over and above that normally provided by
the primary generator. Spack only supports the 'Unix Makefiles' and
'Ninja' primary generators but was not parsing out the primary
generator when a secondary generator was also included (e.g. for
a generator attribute like 'Codeblocks - Ninja'). This adds a regex
for extracting the primary generator for validation.
Since the secondary generator is irrelevant to a Spack build, it is
passed on to CMake without further validation.
* CUDA compiler conflicts for Linux.
* Add Volta and Turing GPUs.
* Add mandatory conflict for Volta and Turing GPUs.
* Revert "CUDA compiler conflicts for Linux."
This reverts commit 7d4ff654ac53aad272c59e9f7f8bb3fbb32bcec4.
* Compiler conflicts introduced from previous commit into CUDA packaged moved and integrated into CUDA build system.
* More conversative with compiler conflicts for cuda 10.0.130, since I don't know what will happen with future cuda 10.x releases.
* Correct off-by-one errors in clang conflicts for x86_64 Linux.
* No restrictions on Apple Clang compiler until we are able to distinguish Xcode clang from github clang more easily. Note to fix this in the future.
* Change comment to clarify that github clang refers to LLVM clang.
* Fix and simplify index range.
* Fix overlapping conflicts for CUDA 10.0.130
* Removed extra ^cuda from conflict.
Debug output now includes the output of modulecmd executions. Only
output module content when a failure occurs; always report when a
module is loaded/unloaded.
"spack install" will install all packages added to the current
environment. When this included external packages, the environment
update would fail because it would attempt to copy log files that
were only generated if Spack handled the install itself. This skips
that step for external packages.
* Allow overwrite nonexistent and multiple packages
initial implementation
give one prompt to users instead of a prompt per spec
testing
* flake
* bugfix: install overwrite check each spec against installed
* python3 compliance for filter/map
* Remove Cray CC compilers causing problems on case-insensitive filesystems
* cray -> cce
* Ensure that compiler-specific directory comes first in build-env
* Point to compiler-specific symlinks
Binary caches of packages with absolute symlinks had broken symlinks.
As a stopgap measure, #9747 addressed this by replacing symlinks with
copies of files when creating binary cached packages.
This reverts #9747 and instead, either relative-izes the symlink or
rewrites the target. If the binary cache is created using '--rel' (as
in "spack buildcache create --rel...") then absolute symlinks will be
replaced with relative symlinks (in addition to making RPATHs relative
as before); otherwise they are rewritten (when the binary cache is
unpacked and installed).
The current output of buildcache list is very verbose and I feel like
some details are getting lost. By making the output similar to find, I
think users will be able to get a better overview of what is stored in
the cache.
* dealii: fix concretization of xsdk package
* tests: add concretization tests for deal.II and xSDK, which are often broken due to limitations in the concretizer
* use pytest.mark.parametrize
Allow customizing views with Spec-formatted directory structure
Allow views to specify projections that are more complicated than
merging every package into a single shared prefix. This will allow
sites to configure a view for the way they want to present packages
to their users; for example this can be used to create a prefix for
each package but omit the DAG hash from the path.
This includes a new YAML format file for specifying the simplified
prefix for a spec in a view. This configuration allows the use of
different prefix formats for different specs (i.e. specs depending
on MPI can include the MPI implementation in the prefix).
Documentation on usage of the view projection configuration is
included.
Depending on the projection configuration, paths are not guaranteed
to be unique and it may not be possible to add multiple installs of
a package to a view.
Fixes#10284#10152 replaced shutil.move with llnl's copy and copy_tree for
resources. This did not copy permissions so led to later failures
if an executable was copied (e.g. a configure script). This uses
install/install_tree instead, which preserve permissions.
* Initial compiler support
* added arm.py
* Changed licence to Arm suggested header
* Changed licence to the same as clang.py
Main author of file is Nick Forrington <Nick.Forrington@arm.com>
Minor changes by Srinath Vadlamani <srinath.vadlamani@arm.com>
* compilers: add arm compiler detection to Spack
- added arm.py with support for detecting `armclang` and `armflang`
Co-authored-by: Srinath Vadlamani <srinath.vadlamani@arm.com>
* Changed to using get get_compiler_version
* linking to general cc for arm compiler
* For arm compiler add CFLAGS to use compiler-rt rtlib.
* Escape for special characters in rexep
* Cleaned up for Flake8 to pass.
* libcompiler-rt should be part of the LDFLAGS not CFLAGS
* fixed m4 when using clang to used LDFLAGS. Fixed comments for arm.py to display compiler --version output with # NOAQ for flakes pass.
* added arm compilers
* proper linked names
This enforces conventions that allow for correct handling of
multi-valued variants where specifying no value is an option,
and adds convenience functionality for specifying multi-valued
variants with conflicting sets of values. This also adds a notion
of "feature values" for variants, which are those that are understood
by the build system (e.g. those that would appear as configure
options). In more detail:
* Add documentation on variants to the packaging guide
* Forbid usage of '' or None as a possible variant value, in
particular as a default. To indicate choosing no value, the user
must explicitly define an option like 'none'. Without this,
multi-valued variants with default set to None were not parsable
from the command line (Fixes#6314)
* Add "disjoint_sets" function to support the declaration of
multi-valued variants with conflicting sets of options. For example
a variant "foo" with possible values "a", "b", and "c" where "c"
is exclusive of the other values ("foo=a,b" and "foo=c" are
valid but "foo=a,c" is not).
* Add "any_combination_of" function to support the declaration of
multi-valued variants where it is valid to choose none of the
values. This automatically defines "none" as an option (exclusive
with all other choices); this value does not appear when iterating
over the variant's values, for example in "with_or_without" (which
constructs autotools option strings from variant values).
* The "disjoint_sets" and "any_combination_of" methods return an
object which tracks the possible values. It is also possible to
indicate that some of these values do not correspond to options
understood by the package's build system, such that methods like
"with_or_without" will not define options for those values (this
occurs automatically for "none")
* Add documentation for usage of new functions for specifying
multi-valued variants
Non-expanded resources were being deleted from the cache on account
of two behaviors:
* ResourceStage was moving files rather than copying them, and uses
"os.path.realpath" to resolve symlinks
* CacheFetchStrategy creates a symlink to a cached resource rather
than copying it
This alters the first behavior: ResourceStage now copies the file
rather than moving it.
"mirror create" was invoking a package's do_patch method in order to
retrieve and archive URL patches. If a package implements a "patch"
method, this is also called as part of do_patch; this failed when the
package-specific implementation referred to environment variables
that are only available at the time the package is built
(e.g. "spack_cc").
This change introduces fetch and clean methods for patches. They are
no-ops for FilePatch but perform the appropriate actions for
UrlPatch. This allows "mirror create" to invoke do_fetch, which does
not call the package's patch method.
- in many files, regular strings were used in places where raw strings
should've been used.
- convert these to raw strings and get rid of new flake8 errors
This PR improves the validation of `modules.yaml` by introducing a custom validator that checks if an attribute listed in `properties` or `patternProperties` is a valid spec. This new check applied to the test case in #9857 gives:
```console
$ spack install szip
==> Error: /home/mculpo/.spack/linux/modules.yaml:5: "^python@2.7@" is an invalid spec [Invalid version specifier]
```
Details:
* Moved the set-up of a custom validator class to spack.schema
* In Spack we use `jsonschema` to validate configuration files
against a schema. We also need custom validators to enforce
writing default values within "properties" or "patternProperties"
attributes.
* Currently, validators were customized at the place of use and with the
recent introduction of environments that meant we were setting-up and
using 2 different validator classes in two different modules.
* This commit moves the set-up of a custom validator class in the
`spack.schema` module and refactors the code in `spack.config` and
`spack.environments` to use it.
* Added a custom validator to check if an attribute is a valid spec
* Added a custom validator that can be used on objects, which yields an
error if the attribute is not a valid spec.
* Updated the schema for modules.yaml
* Updated modules.yaml to fix a few inconsistencies:
- a few attributes were not tested properly using 'anyOf'
- suffixes has been updated to also check that the attribute is a spec
- hierarchical_scheme has been updated to hierarchy
* Removed $ref from every schema
* $ref is not composable or particularly legible
* Use python dicts and regular old variables instead.
- The nested directive implementation was broken for python 3
- directive results were not properly removed from the directive list
when it was processed in the DirectiveMeta metaclass.
- the issue was that remove_directives only descended into a list or
tuple, but in Python3, the initial value passed to the function is a
view of dictionary values.
- make it a list to fix things, and add a regression test.
- currently just looks at patches
- allows you to find out which package applied a patch to a spec
- intended to work with tarballs and resources in the future.
- add tab completion for `spack resource` and subcommands
- previously, if a concrete sub-DAG with patched specs was written out
and read back in, its patches would not be found because the dependent
that patched it was no longer in the DAG.
- Add a test to ensure that the PatchCache handles this case.
- Also add tests to ensure that patch objects are properly created from
Specs -- previously we only checked that the patches were on the Spec.
- this fixes a bug where if we save a concretized sug-DAG where a package
had been patched by a dependent, and the dependent was not in the DAG,
we would not read in all patches correctly.
- Rather than looking up patches in the DAG, we look them up globally
from an index created from the entire repository.
- The patch cache is a bit tricky for several reasons:
- we have to cache information from packages, specifically, the patch
level and working directory.
- FilePatches need to know which package owns them, so that they can
figure out where the patch lives. The repo can change locations from
run to run, so we have to store relative paths and restore them when
the cache is reloaded.
- Patch files can change underneath the cache, because repo indexes
only update on package changes. We currently punt on this -- there
are stub methods for needs_update() that will need to check patch
files when packages are loaded. There isn't an easy way to do this
at global indexing time without making the FastPackageChecker a lot
slower. This is TBD for a future commit.
- Currently, the same patch can only be used one way in a package. That
is, if it appears twice with different level/working_dir settings,
bad things will happen. There's no package that current uses the
same patch two different ways, so we've punted on this as well, but
we may need to fix this in the future by moving a lot of the metdata
(level, working dir) to the spec, and *only* caching sha256sums in
the PatchCache. That would require some much more complicated tweaks
to the Spec, so we're holding off on that til later.
- This required patches to be refactored somewhat -- the difference
between a UrlPatch and a FilePatch is still not particularly clean.
- indexes should use json, not YAML, to optimize for speed
- only use YAML in human-editable files
- this makes ProviderIndex consistent with other indexes
- virtual provider cache and tags were previously generated by nearly
identical but separate methods.
- factor out an Indexer interface for updating repository caches, and
provide implementations for each type of index (TagIndex,
ProviderIndex) so that more can be added if needed.
- Among other things, this allows all indexes to be updated at once.
This is an advantage because loading package files is the real
overhead, and building the indexes once the packages are loaded is
trivial. We avoid extra bulk read-ins by generating all package indexes
at once.
- This can be extended for dependents (reverse dependencies) and patches
later.
- cleanup patch.py:
- make patch.py constructors more understandable
- loosen coupling of patch.py with package
- in Package: make package_dir, module, and namespace class properties
- These were previously instance properties and couldn't be called from
directives, e.g. in patch.create()
- make them class properties so that they can be used in class definition
- also add some instance properties to delegate to class properties so
that prior usage on Package objects still works
- When returning string output, use text_type and decode utf-8 in Python
2 instead of using `str`
- This properly handles unicode, whereas before we would pass bad strings
to colify in `spack blame` when reading git output
- add a test that round-trips some unicode through an Executable object
* Remove /nfs/tmp2 from default configuration
* /nfs/tmp2 is going away from LC... and doesn’t exist for the rest of the world.
* update documentation to remove /nfs/tmp2 as well
* Record build output as an array of lines rather than concatenating to a
single large string.
* Use string.find to avoid running re.search on every line of output.
- some commands were missed in the rollout of spack environments
- this makes all commands that need to disambiguate specs restrict the
disambiguation to installed packages in the active environment, as
users would expect
* This fixes a number of bugs:
* Patches were not properly downloaded and added to mirrors.
* Mirror create didn't respect `list_url` in packages
* Update the `spack mirror` command to add all packages in the
concretized DAG (where originally it only added the package specified
by the user). This is required in order to collect patches that are specified
by dependents. Example:
* if X->Y and X requires a patch on Y called Pxy, then Pxy will only
be discovered if you create a mirror with X.
* replace confusing --one-version-per-spec option for `spack mirror create`
with --versions-per-spec; support retrieving multiple versions for
concrete specs
* Implementation details:
* `spack mirror create` now uses regular staging logic to download files
into a mirror, instead of reimplementing it in `add_single_spec`.
* use a separate resource caching object to keep track of new
resources and already-existing resources; also accepts storing
resources retrieved from a cache (unlike the local cache)
* mirror cache object now stores resources that are considered
non-cachable, like (e.g. the tip of a branch);
* the 'create' function of the mirror module no longer traverses
dependencies since this was already handled by the 'mirror' command;
* Change handling of `--no-checksum`:
* now that 'mirror create' uses stages, the mirror tests disable
checksums when creating the mirror
* remove `no_checksum` argument from library functions - this is now
handled at the Spack-command-level (like for 'spack install')
- all multimethod tests are now run for both `multimethod` and
`multimethod-inheritor`
- do this with a parameterized fixture (pkg_name) that runs the same
tests on both
- Since early Spack versions, the SpecParser has (weirdly) been
responsible for initializing Spec fields.
- This refactors initialization to take place in Spec.__init__, as it
probably should have originally.
- This makes the code easier to read, the parser easier to understand,
and removes the use of __new__ in the parser to initialize the Spec.
- This also makes it possible to make a completely empty Spec with
`Spec()` -- this is an abstract Spec that will match anything.
* "spack install" now uses cache by default, update examples accordingly
* Replace some example packages with others
* Packing tutorial reference to "spack env" replaced with "spack build-env"
* Command line prompts in examples are shortened
* Example output (including paths) are updated to be more relevant to training environment
Update all examples that need an MPI provider to build with MPICH; reorganize so that fixing MPICH (as part of environment section) comes first in the tutorial (most examples in the tutorial use an MPI provider).
- previously, uninstall would complain if a spec was needed by an
environment.
- Now, we analyze dependents and dependent environments and simply remove
(not uninstall) specs that are needed by environments
- with no arguments, these commands will now edit or dump the
environment's `spack.yaml` file.
- users may not know where named environments live
- this makes it convenient for users to get to the spack.yaml
configuration file for their named environment.
* Update Makefile to use property methods ("build_targets"/"install_targets")
to demonstrate their usage
* Fix highlighting
* Change cbench example to ESMF:
CBench package file was changed and no longer uses the example shown in
the old docs
Scopes added with -C are now referred to as "custom scopes"
rather than "command line scopes". "command line scope" now refers
to specific config options that are set on the command line (like
"--insecure")
- default is still to use the cache, but we've added back the
`--use-cache` argument so that scripts that used it are still correct.
- `--no-cache` is stil present and is mutually exclusive with `--use-cache`
* Introduce FFTW2 and FFT3 providers for Intel-MKL and FFTW Spack packages.
* make fftw default package for fftw-api virtual package
* virtual package test assertion now provides location of default virtual packages.
* Change name of virtual package to fftw-api and used versioned interface.
- all commands (except `spack find`, through `ConstraintAction`) now go
through get_env() to get the active environment
- ev.active was hard to read -- and the name wasn't descriptive.
- rename it to _active_environment to be more descriptive and to strongly
indicate that spack.environment manages it
- to aovid changing spec hashes drastically, only add this attribute to
differentiated abstract specs.
- othherwise assume that read-in specs are concrete
- spack.yaml files in the current directory were picked up inconsistently
-- make this a sure thing by moving that logic into find_environment()
and moving find_environment() to main()
- simplify arguments to Spack command:
- remove short args for infrequently used commands (--pdb/-D, -P, -s)
- `spack -D` now forces an env with a directory
- The `Spec` class maintains a special `_patches_in_order_of_appearance`
attribute on patch variants, but it is was preserved when specs are
copied.
- This caused issues for some builds
- Add special logic to `Spec` to preserve this variant on copy
- TODO: in the long term we should get rid of the special variant and
make it the responsibility of one of the variant classes.
- split 'environment' section into 'environments' and 'modules'
- move location to 'query packages' section
- move cd to developer section
- --env-dir no longer has a short optino (was -E)
- -E now means "run without an environment" (no longer same as --env-dir)
- -D now means "run with this directory environment"
- remove short options for may infrequently used top-level commands
- `spack env status` used to show install status; consolidate that into
`spack find`.
- `spack env status` will still print out whether there is an active
environment
- uninstall now:
- restricts its spec search to the current environment
- removes uninstalled specs from the current environment
- reports envs that still need specs you're trying to uninstall
- removed spack env uninstall command
- updated tests
- moved get_env from cmd/env.py to environment.py
- spack install will now install into the active environment when no
arguments are provided. It looks:
1. at the command line
2. for a local spack.yaml file
3. for any currently activated environment
- `spack env create <name>` works as before
- `spack env create <path>` now works as well -- environments can be
created in their own directories outside of Spack.
- `spack install` will look for a `spack.yaml` file in the current
directory, and will install the entire project from the environment
- The Environment class has been refactored so that it does not depend on
the internal Spack environment root; it just takes a path and operates
on an environment in that path (so internal and external envs are
handled the same)
- The named environment interface has been hoisted to the
spack.environment module level.
- env.yaml is now spack.yaml in all places. It was easier to go with one
name for these files than to try to handle logic for both env.yaml and
spack.yaml.
- `spack env activate foo`: sets SPACK_ENV to the current active env name
- `spack env deactivate`: unsets SPACK_ENV, deactivates the environment
- added support to setup_env.sh and setup_env.csh
- other env commands work properly with SPACK_ENV, as with an environment
arguments.
- command-line --env arguments take precedence over the active
environment, if given.
- env.yaml is now meaningful; it contains authoritative user specs
- concretize diffs user specs in env.yaml and env.json to allow user to
add/remove by simply updating env.yaml
- comments are preserved when env.yaml is updated by add/unadd
- env.yaml can contain configuration and include external configuration
either from merged files or from config scopes
- there is only one file format to remember (env.yaml, no separate init
format)
- env.json is now env.lock, and it stores the *last* user specs to be
concretized, along with full provenance.
- internal structure was modified slightly for readability
- env.lock contains a _meta section with metadata, in case needed
- added more tests for environments
- env commands follow Spack conventions; no more `spack env foo install`
- add `SingleFileScope` to configuration, which allows us to pull config
sections from a single file.
- update `env.yaml` and tests to ensure that the env.yaml schema works
when pulling configurtion from the env file.
- Each schema now has a top-level `properties` and `schema` attribute.
- The `properties` is a fragment that can be included in other
jsonschemas, via Python, not via '$ref'
- Th `schema` is a complete `jsonschema` with `title` and `$schema`
properties.
- add a common argument for `-e/--env`
- modify the database to support queries on subsets of hashes
- allow `spack find` to be filtered by hashes in an environment
- logic used in `spack find` was hiding duplicate installations if their
hashes were different
- short hash doesn't work in this scenario, since specs are structurally
identical
- ConstraintAction always works on a DB query, so use the DAG hash to
ensure uniqueness
- `spack.environment` is now the home for most of the infrastructure
around Spack environments
- refactor `cmd/env.py` to use everything from spack.environment
- refactor the cmd/env test to use pytest and fixtures
- `spack.util.environment` is the new home for routines that modify
environment variables.
- This is to make room for `spack.environment` to contain new routines
for dealing with spack environments
- Instead of one method with all parsers, each subcommand gets two
functions: `setup_<cmd>_parser()` and `environment_<cmd>()`
- the `setup_parser()` and `env()` functions now generate the parser
based on these and a list of subcommands.
- it is now easier to associate the arguments with the subcommand.
* modified tutorial packages
* update hint in hdf5 tutorial file (typo for suggested argument)
* add repo.yaml to tutorial repository
* update tutorial docs to refer user to tutorial package repository
* flake edits
* recommend site scope vs. defaults
* you don't specify the repo's name when adding a repo, just the path
* omit symlinks and create file copies when making a binary cache of a package
* unrelated flake edits involving regexes that recent flake is now angry about
* Record stdout for packages without errors
Previously our reporter only stored stdout if something went wrong
while installing a package. This prevented us from properly reporting
on steps where everything went as expected.
* More robustly report all phases to CDash
Previously if a phase generated no output it would not be reported to CDash.
For example, consider the following output:
==> Executing phase: 'configure'
==> Executing phase: 'build'
This would not generate a report for the configure phase. Now it does.
* Add test case for CDash reporting clean builds
* Fix default directory for CDash reports
The default 'cdash_report' directory name was getting overwritten
by 'junit-report'.
* Upload the build phase first to CDash
Older versions of CDash expect Build.xml to be the first file uploaded
for any given build.
* Define cdash_phase before referring to it
fixes#9739
The non-daemonic pool relies heavily on implementation details of the
multiprocessing package. In this commit we provide an implementation
that fits recent python versions.
This allows installing software on a namespace basis by including ${NAMESPACE} in `install_path_scheme`. e.g.,
```
cat ~/.spack/config.yaml
config:
install_path_scheme:
"${ARCHITECTURE}/${NAMESPACE}/${COMPILERNAME}-${COMPILERVER}/${PACKAGE}-${VERSION}-${HASH}"
```
The 'static_to_shared_library' function takes a compiler Executable,
which is intended to be invoked with a list of arguments; the
arguments must be separated from their values in the list, given
the way that 'Executable.__call__' invokes the underlying executable.
'static_to_shared_library' was not doing this, which this commit fixes.
Clang has support for using different fortran compilers with the Clang executable.
Spack includes logic to select a compiler wrapper symlink which refers to the fortran executable (since some build systems depend on the name of the compiler, e.g. 'gfortran' or 'flang').
This selection was previously based on the architecture, and chose incorrectly in some situations (e.g. for clang/gfortran on Linux). This replaces architecture-based wrapper selection with a selection that is based on the name of the Fortran compiler executable.
* Unite Dockerfiles - add build/run/push scripts
* update docker documentation
* update .travis.yml
* switch to using a preprocessor on Dockerfiles
* skip building docker images on pull requests
* update files with copyright info
* tweak when travis builds for docker files are done
fixes#9624
merge_config_rules was using `strict=False` to check if a spec
satisfies a constraint, which loosely translates to "this spec has
no conflict with the constraint, so I can potentially add it to the
spec". We want instead `strict=True` which means "the spec satisfies
the constraint right now".
- #8773 made the default mode 0o777, which is what's documented but
mkdirp actually takes the OS default or umask by default
- revert to the Python default by default, and only set the mode when
asked explicitly.
