- Remove legacy yaml_version_check() hook
- Remove the pre_run hook from `hook/__init__.py` and `main.py`
We want to discourage the use of pre-run hooks because they have to run
at startup. To keep Spack fast, we should do things like this lazily
instead of in hooks that require spidering directories full of modules.
Continuing to shave small bits of time off startup --
`spack.cmd.common.arguments` constructs many `Args` objects at module
scope, which has to be done for all commands that import it. Instead of
doing this at load time, do it lazily.
- [x] construct Args objects lazily
- [x] remove the module-scoped argparse fixture
- [x] make the mock config scope set dirty to False by default (like the
regular scope)
This *seems* to reduce load time slightly
Previously, fixtures like `config`, `database`, and `store` were
module-scoped, but frequently used as test function arguments. These
fixtures swap out global on setup and restore them on teardown. As
function arguments, they would do the right set-up, but they'd leave the
global changes in place for the whole module the function lived in. This
meant that if you use `config` once, other functions in the same module
would inadvertently inherit the mock Spack configuration, as it would
only be torn down once all tests in the module were complete.
In general, we should module- or session-scope the *STATE* required for
these global objects (as it's expensive to create0, but we shouldn't
module-or session scope the activation/use of them, or things can get
really confusing.
- [x] Make generic context managers for global-modifying fixtures.
- [x] Make session- and module-scoped fixtures that ONLY build filesystem
state and create objects, but do not swap out any variables.
- [x] Make seeparate function-scoped fixtures that *use* the session
scoped fixtures and actually swap out (and back in) the global
variables like `config`, `database`, and `store`.
These changes make it so that global changes are *only* ever alive for a
singlee test function, and we don't get weird dependencies because a
global fixture hasn't been destroyed.
`PackagePrefs` has had a class-level cache of data from `packages.yaml` for
a long time, but it complicates testing and leads to subtle errors,
especially now that we frequently manipulate custom config scopes and
environments.
Moving the cache to instance-level doesn't slow down concretization or
the test suite, and it just caches for the life of a `PackagePrefs`
instance (i.e., for a single cocncretization) so we don't need to worry
about global state anymore.
- [x] Remove class-level caches from `PackagePrefs`
- [x] Add a cached _spec_order object on each `PackagePrefs` instance
- [x] Remove all calls to `PackagePrefs.clear_caches()`
Commands like `spack blame` were printig poorly when redirected to files,
as colify reverts to a single column when redirected. This works for
list data but not tables.
- [x] Force a table by always passing `tty=True` from `colify_table()`
In "spack info" the Variants header currently has two blank
lines under it. That's too much. It looks like the actual
content belongs to something else.
Instead underline the headers to make things more obvious.
This commit removes the `python_version.py` unit test module
and the vendored dependencies `pyqver2.py` and `pyqver3.py`.
It substitutes them with an equivalent check done using
`vermin` that is run as a separate workflow via Github Actions.
This allows us to delete 2 vendored dependencies that are unmaintained
and substitutes them with a maintained tool.
Also, updates the list of vendored dependencies.
`ViewDescriptor.regenerate()` calls `get_all_specs()`, which reads
`spec.yaml` files, which is slow. It's fine to do this once, but
`view.remove_specs()` *also* calls it immediately afterwards.
- [x] Pass the result of `get_all_specs()` as an optional parameter to
`view.remove_specs()` to avoid reading `spec.yaml` files twice.
`ViewDescriptor.regenerate()` was copying specs and stripping build
dependencies, which clears `_hash` and other cached fields on concrete
specs, which causes a bunch of YAML hashes to be recomputed.
- [x] Preserve the `_hash` and `_normal` fields on stripped specs, as
these will be unchanged.
`spack install` previously concretized, writes the entire environment
out, regenerated views, then wrote and regenerated views
again. Regenerating views is slow, so ensure that we only do that once.
- [x] add an option to env.write() to skip view regeneration
- [x] add a note on whether regenerate_views() shouldn't just be a
separate operation -- not clear if we want to keep it as part of write
to ensure consistency, or take it out to avoid performance issues.
Environments need to read the DB a lot when installing all specs.
- [x] Put a read transaction around `install_all()` and `install()`
to avoid repeated locking
Our `LockTransaction` class was reading overly aggressively. In cases
like this:
```
1 with spack.store.db.read_transaction():
2 with spack.store.db.write_transaction():
3 ...
```
The `ReadTransaction` on line 1 would read in the DB, but the
WriteTransaction on line 2 would read in the DB *again*, even though we
had a read lock the whole time. `WriteTransaction`s were only
considering nested writes to decide when to read, but they didn't know
when we already had a read lock.
- [x] `Lock.acquire_write()` return `False` in cases where we already had
a read lock.
If a write transaction was nested inside a read transaction, it would not
write properly on release, e.g., in a sequence like this, inside our
`LockTransaction` class:
```
1 with spack.store.db.read_transaction():
2 with spack.store.db.write_transaction():
3 ...
4 with spack.store.db.read_transaction():
...
```
The WriteTransaction on line 2 had no way of knowing that its
`__exit__()` call was the last *write* in the nesting, and it would skip
calling its write function.
The `__exit__()` call of the `ReadTransaction` on line 1 wouldn't know
how to write, and the file would never be written.
The DB would be correct in memory, but the `ReadTransaction` on line 4
would re-read the whole DB assuming that other processes may have
modified it. Since the DB was never written, we got stale data.
- [x] Make `Lock.release_write()` return `True` whenever we release the
*last write* in a nest.
Lock transactions were actually writing *after* the lock was
released. The code was looking at the result of `release_write()` before
writing, then writing based on whether the lock was released. This is
pretty obviously wrong.
- [x] Refactor `Lock` so that a release function can be passed to the
`Lock` and called *only* when a lock is really released.
- [x] Refactor `LockTransaction` classes to use the release function
instead of checking the return value of `release_read()` / `release_write()`
`ViewDescriptor.regenerate()` checks repeatedly whether packages are
installed and also does a lot of DB queries. Put a read transaction
around the whole thing to avoid repeatedly locking and unlocking the DB.
`Environment.added_specs()` has a loop around calls to
`Package.installed()`, which can result in repeated DB queries. Optimize
this with a read transaction in `Environment`.
Checks for deprecated specs were repeatedly taking out read locks on the
database, which can be very slow.
- [x] put a read transaction around the deprecation check
BundlePackages use a noop fetch strategy. The mirror logic was assuming
that the fetcher had a resource to cach after performing a fetch. This adds
a special check to skip caching if the stage is associated with a
BundleFetchStrategy. Note that this should allow caching resources
associated with BundlePackages.
When updating a mirror, Spack was re-retrieving all patches (since the
fetch logic for patches is separate). This updates the patch logic to
allow the mirror logic to avoid this.
Since cache_mirror does the fetch itself, it also needs to do the
checksum itself if it wants to verify that the source stored in the
mirror is valid. Note that this isn't strictly required because fetching
(including from mirrors) always separately verifies the checksum.
The targets for the cosmetic paths in mirrrors were being calculated
incorrectly as of fb3a3ba: the symlinks used relative paths as targets,
and the relative path was computed relative to the wrong directory.
When creating a cosmetic symlink for a resource in a mirror, remove
it if it already exists. The symlink is removed in case the logic to
create the symlink has changed.
* Some packages (e.g. mpfr at the time of this patch) can have patches
with the same name but different contents (which apply to different
versions of the package). This appends part of the patch hash to the
cache file name to avoid conflicts.
* Some exceptions which occur during fetching are not a subclass of
SpackError and therefore do not have a 'message' attribute. This
updates the logic for mirroring a single spec (add_single_spec)
to produce an appropriate error message in that case (where before
it failed with an AttributeError)
* In various circumstances, a mirror can contain the universal storage
path but not a cosmetic symlink; in this case it would not generate
a symlink. Now "spack mirror create" will create a symlink for any
package that doesn't have one.
`ViewDescriptor.regenerate()` calls `get_all_specs()`, which reads
`spec.yaml` files, which is slow. It's fine to do this once, but
`view.remove_specs()` *also* calls it immediately afterwards.
- [x] Pass the result of `get_all_specs()` as an optional parameter to
`view.remove_specs()` to avoid reading `spec.yaml` files twice.
`ViewDescriptor.regenerate()` was copying specs and stripping build
dependencies, which clears `_hash` and other cached fields on concrete
specs, which causes a bunch of YAML hashes to be recomputed.
- [x] Preserve the `_hash` and `_normal` fields on stripped specs, as
these will be unchanged.
`spack install` previously concretized, writes the entire environment
out, regenerated views, then wrote and regenerated views
again. Regenerating views is slow, so ensure that we only do that once.
- [x] add an option to env.write() to skip view regeneration
- [x] add a note on whether regenerate_views() shouldn't just be a
separate operation -- not clear if we want to keep it as part of write
to ensure consistency, or take it out to avoid performance issues.
Environments need to read the DB a lot when installing all specs.
- [x] Put a read transaction around `install_all()` and `install()`
to avoid repeated locking
Our `LockTransaction` class was reading overly aggressively. In cases
like this:
```
1 with spack.store.db.read_transaction():
2 with spack.store.db.write_transaction():
3 ...
```
The `ReadTransaction` on line 1 would read in the DB, but the
WriteTransaction on line 2 would read in the DB *again*, even though we
had a read lock the whole time. `WriteTransaction`s were only
considering nested writes to decide when to read, but they didn't know
when we already had a read lock.
- [x] `Lock.acquire_write()` return `False` in cases where we already had
a read lock.
If a write transaction was nested inside a read transaction, it would not
write properly on release, e.g., in a sequence like this, inside our
`LockTransaction` class:
```
1 with spack.store.db.read_transaction():
2 with spack.store.db.write_transaction():
3 ...
4 with spack.store.db.read_transaction():
...
```
The WriteTransaction on line 2 had no way of knowing that its
`__exit__()` call was the last *write* in the nesting, and it would skip
calling its write function.
The `__exit__()` call of the `ReadTransaction` on line 1 wouldn't know
how to write, and the file would never be written.
The DB would be correct in memory, but the `ReadTransaction` on line 4
would re-read the whole DB assuming that other processes may have
modified it. Since the DB was never written, we got stale data.
- [x] Make `Lock.release_write()` return `True` whenever we release the
*last write* in a nest.
Lock transactions were actually writing *after* the lock was
released. The code was looking at the result of `release_write()` before
writing, then writing based on whether the lock was released. This is
pretty obviously wrong.
- [x] Refactor `Lock` so that a release function can be passed to the
`Lock` and called *only* when a lock is really released.
- [x] Refactor `LockTransaction` classes to use the release function
instead of checking the return value of `release_read()` / `release_write()`
`ViewDescriptor.regenerate()` checks repeatedly whether packages are
installed and also does a lot of DB queries. Put a read transaction
around the whole thing to avoid repeatedly locking and unlocking the DB.
Users can now list mirrors of the main url in packages.
- [x] Instead of just a single `url` attribute, users can provide a list (`urls`) in the package, and these will be tried by in order by the fetch strategy.
- [x] To handle one of the most common mirror cases, define a `GNUMirrorPackage` mixin to handle all the standard GNU mirrors. GNU packages can set `gnu_mirror_path` to define the path within a mirror, and the mixin handles setting up all the requisite GNU mirror URLs.
- [x] update all GNU packages in `builtin` to use the `GNUMirrorPackage` mixin.
- Add an optional argument so that `possible_dependencies()` will report
missing dependencies.
- Add a test to ensure it works.
- Ignore missing dependencies in `possible_dependencies()` by default.
- this version allows getting possible dependencies of multiple packages
or specs at once.
- New method handles calling `PackageBase.possible_dependencies` multiple
times and passing `visited` dict around.
`Environment.added_specs()` has a loop around calls to
`Package.installed()`, which can result in repeated DB queries. Optimize
this with a read transaction in `Environment`.
Checks for deprecated specs were repeatedly taking out read locks on the
database, which can be very slow.
- [x] put a read transaction around the deprecation check
doesn't understand a custom, user-defined compiler version. However, if
the compiler's version check fails, you can't build anything with the
custom compiler.
- [x] Be more lenient: fall back to the custom compiler version and use
it verbatim if the version check fails.
`pgcc -V` was failing on power machines because it returns 2 (despite
correctly printing version information). On x86_64 machines the same
command returns 0 and doesn't cause an error.
- [x] Ignore return value of 2 for pgcc when doign a version check
Vendors for ARM come out of `/proc/cpuinfo` as hex numbers instead of readable strings.
- Add support for associating vendor names with the hex numbers.
- Also move these mappings from Python code to `microarchitectures.json`
- Move darwin feature name mappings to `microarchitectures.json` as well
* when constructing package hash, default to including a method in the content hash if we can't determine whether it would be included by examining the AST
* add a test for updated content-hash calculations
* refactor content hash tests to eliminate repeated lines
BundlePackages use a noop fetch strategy. The mirror logic was assuming
that the fetcher had a resource to cach after performing a fetch. This adds
a special check to skip caching if the stage is associated with a
BundleFetchStrategy. Note that this should allow caching resources
associated with BundlePackages.
When updating a mirror, Spack was re-retrieving all patches (since the
fetch logic for patches is separate). This updates the patch logic to
allow the mirror logic to avoid this.
Since cache_mirror does the fetch itself, it also needs to do the
checksum itself if it wants to verify that the source stored in the
mirror is valid. Note that this isn't strictly required because fetching
(including from mirrors) always separately verifies the checksum.
The targets for the cosmetic paths in mirrrors were being calculated
incorrectly as of fb3a3ba: the symlinks used relative paths as targets,
and the relative path was computed relative to the wrong directory.
When creating a cosmetic symlink for a resource in a mirror, remove
it if it already exists. The symlink is removed in case the logic to
create the symlink has changed.
* pytest: add __init__ files for all test subdirs
* add licenses to empty files
* Fix Sphinx warning message about comment within docstring
* Further fixes to Sphinx docstring
* fix docstring in generate_package_index() refering to "public" keys as "signing" keys
* use explicit kwargs in push_to_url()
* simplify url_util.parse() per tgamblin's suggestion
* replace standardize_header_names() with the much simpler get_header()
* add some basic tests
* update s3_fetch tests
* update S3 list code to strip leading slashes from prefix
* correct minor warning regression introduced in #11117
* add more tests
* flake8 fixes
* add capsys fixture to mirror_crud test
* add get_header() tests
* use get_header() in more places
* incorporate review comments
This PR allows virtual packages to be added to the specs list using
the add command.
Virtual packages are already allowed in named lists in spack
environments/stacks, and they are already allowed in the specs list
when added using the yaml directly.
I have, more than once, tried to install the list of things that need
to build the docs, only to discover that the list doesn't use Spack's
package names. I'm tired of facepalming....
While I was there I touched up the prose about activating the new
Python packages; activating a python package doesn't add anything to
your PYTHONPATH, it links things into a directory that's *already* on
your PYTHONPATH. Note that this all presupposes that you're using
that same python....
* CUDA HeaderList: Unit Test
* Spec Header Dirs: Only first include/
Avoid matching recurringly nested include paths that usually
refer to internally shipped libraries in packages.
Example in CUDA Toolkit, shipping a libc++ fork internally
with libcu++ since 10.2.89:
`<prefix>/include/cuda/some/more/details/include/` or
`<prefix>/include/cuda/std/detail/libcxx/include`
regex: non-greedy first match of include
Co-Authored-By: Massimiliano Culpo <massimiliano.culpo@gmail.com>
* CUDA: Re-Enable 10.2.89 as Default
* apply strict constraint checks for patches, otherwise Spack may incorrectly treat a version range constraint as satisfied when mixing x.y and x.y.z versions
* add mixed version checks to version comparison tests
`spack module loads` and `spack module find` previously failed if any upstream modules were missing. This prevented it from being used with upstreams (or, really, any spack instance) that blacklisted modules.
This PR makes module finding is now more lenient (especially for blacklisted modules).
- `spack module find` now does not report an error if the spec is blacklisted
- instead, it prints a single warning if any modules will be omitted from the loads file
- It comments the missing modules out of the loads file so the user can see what's missing
- Debug messages are also printed so users can check this with `spack -d...`
- also added tests for new functionality
`spack module loads` and `spack module find` previously failed if any upstream modules were missing. This prevented it from being used with upstreams (or, really, any spack instance) that blacklisted modules.
This PR makes module finding is now more lenient (especially for blacklisted modules).
- `spack module find` now does not report an error if the spec is blacklisted
- instead, it prints a single warning if any modules will be omitted from the loads file
- It comments the missing modules out of the loads file so the user can see what's missing
- Debug messages are also printed so users can check this with `spack -d...`
- also added tests for new functionality
* Fixed x86-64 optimization flags for clang
* Fixed expected results in unit tests
Before the flags used where the one for llc, the underlying compiler from LLVM IR to machine assembly. It turns out that the semantic of `-march`, `-mtune` and `-mcpu` changes from clang front-end to llc.
I found no definitive reference for the flags submitted in this PR, but I checked the assembly on a vectorizable function using Godbolt's web-site.
* Add a transaction around repeated calls to `spec.prefix` in the activation process
* cache the computation of home in the python package to speed up setting deps
* ensure that module-scope variables are only set *once* per module
* Add a transaction around repeated calls to `spec.prefix` in the activation process
* cache the computation of home in the python package to speed up setting deps
* ensure that module-scope variables are only set *once* per module
`mirror_archive_path` was failing to account for the case where the fetched version isn't known to Spack.
- [x] don't require the fetched version to be in `Package.versions`
- [x] add regression test for mirror paths when package does not have a version
Extensions have been available for a while and the overall design
seems solid enough to be feasible for extensions without losing
backward compatibility.
* Some packages (e.g. mpfr at the time of this patch) can have patches
with the same name but different contents (which apply to different
versions of the package). This appends part of the patch hash to the
cache file name to avoid conflicts.
* Some exceptions which occur during fetching are not a subclass of
SpackError and therefore do not have a 'message' attribute. This
updates the logic for mirroring a single spec (add_single_spec)
to produce an appropriate error message in that case (where before
it failed with an AttributeError)
* In various circumstances, a mirror can contain the universal storage
path but not a cosmetic symlink; in this case it would not generate
a symlink. Now "spack mirror create" will create a symlink for any
package that doesn't have one.
* Add process to determine aarch64 microarchitecture
* add microarchitectures for thunderx2 and a64fx
* Add optimize flags for gcc on aarch64 family processors thunderx2 and a64fx.
* Add optimize flags for clang on aarch64 family processors thunderx2 and a64fx
* Add testing for thunderx2 and a64fx microarchitectures
* Make relative binaries relocate text files properly
* rb strings aren't valid in python 2
* move perl to new interface for setup_environment family methods
* remove reference to `spack.store` in method definition
Referencing `spack.store` in method definition will cache the `spack.config.config` singleton variable too early, before we have a chance to add command line and environment scopes.
* remove reference to `spack.store` in method definition
Referencing `spack.store` in method definition will cache the `spack.config.config` singleton variable too early, before we have a chance to add command line and environment scopes.
Add a configuration option to suppress gpg warnings during binary
package verification. This only suppresses warnings: a gpg failure
will still fail the install. This allows users who have already
explicitly trusted the gpg key they are using to avoid seeing
repeated warnings that it is self-signed.
Add a configuration option to suppress gpg warnings during binary
package verification. This only suppresses warnings: a gpg failure
will still fail the install. This allows users who have already
explicitly trusted the gpg key they are using to avoid seeing
repeated warnings that it is self-signed.
when making a package relative, relocate links relative to link directory
rather than the full link path (which includes the file name) because `os.path.relpath` expects a directory.
Binaries with relative RPATHS currently do not relocate strings
hard-coded in binaries
This PR extends the best-effort relocation of strings hard-coded
in binaries to those whose RPATHs have been relativized.
Binaries with relative RPATHS currently do not relocate strings
hard-coded in binaries
This PR extends the best-effort relocation of strings hard-coded
in binaries to those whose RPATHs have been relativized.
* Docs update for deprecated `spack sha256`
* Added macOS shasum
* Update lib/spack/docs/packaging_guide.rst
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
- [x] Use higher contrast terminal output font
- [x] Use higher contrast code block background color than default
- [x] Use a noticeable prompt character
See also https://github.com/spack/spack-tutorial/pull/10.
`mirror_archive_path` was failing to account for the case where the fetched version isn't known to Spack.
- [x] don't require the fetched version to be in `Package.versions`
- [x] add regression test for mirror paths when package does not have a version
This fixes a regression introduced in #10792. `spack uninstall` in an
environment would not match concrete query specs properly after the index
hash of enviroments changed.
- [x] Search by DAG hash for specs to remove instead of by build hash
If you do this in a spack environment:
spack add hdf5+hl
hdf5+hl will be the root added to the `spack.yaml` file, and you should
really expect `hdf5+hl` to display as a root in the environment.
- [x] Add decoration to roots so that you can see the details about what
is required to build.
- [x] Add a test.
If you do this in a spack environment:
spack add hdf5+hl
hdf5+hl will be the root added to the `spack.yaml` file, and you should
really expect `hdf5+hl` to display as a root in the environment.
- [x] Add decoration to roots so that you can see the details about what
is required to build.
- [x] Add a test.
This fixes a regression introduced in #10792. `spack uninstall` in an
environment would not match concrete query specs properly after the index
hash of enviroments changed.
- [x] Search by DAG hash for specs to remove instead of by build hash
* Make relative binaries relocate text files properly
* rb strings aren't valid in python 2
* move perl to new interface for setup_environment family methods
- [x] insert at beginning of list so fetch grabs local mirrors before remote resources
- [x] update the S3FetchStrategy so that it throws a SpackError if the fetch fails.
Before, it was throwing URLError, which was not being caught in stage.py.
- [x] move error handling out of S3FetchStrategy and into web_util.read_from_url()
- [x] pass string instead of URLError to SpackWebError
- [x] insert at beginning of list so fetch grabs local mirrors before remote resources
- [x] update the S3FetchStrategy so that it throws a SpackError if the fetch fails.
Before, it was throwing URLError, which was not being caught in stage.py.
- [x] move error handling out of S3FetchStrategy and into web_util.read_from_url()
- [x] pass string instead of URLError to SpackWebError
This changes Spack environments so that the YAML file associated with the environment is *only* written when necessary (i.e., if it is changed *by spack*). The lockfile is still written out as before.
There is a larger question here of which part of Spack should be responsible for setting defaults in config files, and how we can get rid of empty lists and data structures currently cluttering files like `compilers.yaml`. But that probably requires a rework of the default-setting validator in `spack.config`, as well as the code that uses `spack.config`. This will at least help for `spack.yaml`.
This changes Spack environments so that the YAML file associated with the environment is *only* written when necessary (i.e., if it is changed *by spack*). The lockfile is still written out as before.
There is a larger question here of which part of Spack should be responsible for setting defaults in config files, and how we can get rid of empty lists and data structures currently cluttering files like `compilers.yaml`. But that probably requires a rework of the default-setting validator in `spack.config`, as well as the code that uses `spack.config`. This will at least help for `spack.yaml`.
Commands like "spack mirror list" were displaying mirrors in a
different order than what was listed in the corresponding mirrors.yaml
file.
This restores commands to iterate over mirrors in the order that
they appear in the config file.
* Travis CI: Test Python 3.8
* Fix use of deprecated cgi.escape method
* Fix version comparison
* Fix flake8 F811 change in Python 3.8
* Make flake8 happy
* Use Python 3.8 for all test categories
Currently, query arguments in the Spack core are documented on the
Database._query method, where the functionality is defined.
For users of the spack python command, this makes the python builtin
method help less than ideally useful, as help(spack.store.db.query)
and help(spack.store.db.query_local) do not show relevant information.
This PR updates the doc attributes for the Database.query and
Database.query_local arguments to mirror everything after the first
line of the Database._query docstring.
* cuda: fix conflict statements for x86-64 targets
fixes#13462
This build system mixin was not updated after the support for specific
targets has been merged.
* Updated the version range of cuda that conflicts with gcc@8:
* Updated the version range of cuda that conflicts with gcc@8: for ppc64le
* Relaxed conflicts for version > 10.1
* Updated versions in conflicts
Co-Authored-By: Axel Huebl <axel.huebl@plasma.ninja>
