The correct place to set the mutual references between spec and
package objects is at the end of concretization. After a call to
concretize we should now be ensured that spec is the same object
as spec.package.spec.
Code in `build_environment.py` that was performing the same
operation has been turned into an assertion to be defensive on
the new behavior.
- Fixes bugs where concretization would fail due to an erroneously cached
_concrete attribute.
- Ripped out a bunch of code in spec.py that isn't needed/valid anymore:
- The various concrete() methods on different types of Specs would
attempt to statically compute whether the Spec was concrete.
- This dates back to when DAGs were simpler and there were no optional
dependencies. It's actually NOT possible to compute statically
whether a Spec is concrete now. The ONLY way you know is if it goes
through concretization and is marked concrete once that completes.
- This commit removes all simple concreteness checks and relies only on
the _concrete attribute. This should make thinking about
concreteness simpler.
- Fixed a couple places where Specs need to be marked concrete explicitly.
- Specs read from files and Specs that are destructively copied from
concrete Specs now need to be marked concrete explicitly.
- These spots may previously have "worked", but they were brittle and
should be explcitly marked anyway.
- Dependencies in concrete specs did not previously have their cache
fields (_concrete, _normal, etc.) preserved.
- _dup and _dup_deps weren't passing each other enough information to
preserve concreteness properly, so only the root was properly
preserved.
- cached concreteness is now preserved properly for the entire DAG, not
just the root.
- added method docs.
Fixes#4112
This commit extends the support of the AutotoolsPackage methods
`with_or_without` and `enable_or_disable` to bool-valued variants. It
also defines for those functions a convenience short-cut if the
activation parameter is the prefix of a spec (like in
`--with-{pkg}={prefix}`).
This commit also includes:
* Updates to viennarna and adios accordingly: they have been modified to
use `enable_or_disable` and `with_or_without`
* Improved docstrings in `autotools.py`. Raise `KeyError` if name is
not a variant.
Renames the existing bootstrap command to 'clone'. Repurposes
'spack bootstrap' to install packages that are useful to the
operation of Spack (for now this is just environment-modules).
For bash and ksh users running setup-env.sh, if a Spack-installed
instance of environment-modules is detected and environment modules
and dotkit are not externally available, Spack will define the
'module' command in the user's shell to use the environment-modules
built by Spack.
First, quote the environment variable values. Second, export the
variables. sorry, this is bourn-shell syntax. Happy to consider a
shell-independent way to do this, but spack is already using sh-like
"env=value"
* Added support to query packages by tags.
- The querying commands `spack list`, `spack find` and `spack info` have
been modified to support querying by tags. Tests have been added to
check that the feature is working correctly under what should be the
most frequent use cases.
* Refactored Repo class to make insertion of new file caches easier.
- Added the class FastPackageChecker. This class is a Mapping from
package names to stat info, that gets memoized for faster access.
- Extracted the creation of a ProviderIndex to its own factory function.
* Added a cache file for tags.
- Following what was done for providers, a TagIndex class has been added.
This class can serialize and deserialize objects from json. Repo and
RepoPath have a new method 'packages_with_tags', that uses the TagIndex
to compute a list of package names that have all the tags passed as
arguments.
On Ubuntu 14.04 the effect if the cache reduces the time for spack list
from ~3sec. to ~0.3sec. after the cache has been built.
* Fixed colorization of `spack info`
This command broke after #5109. It was using the default value for the
"dirty" argument in `setup_package`. Now it adopts the same logic as
in `spack install`. Changed help for '--clean' and '--dirty'.
Improved coverage of spack env.
The private method `Spec._dup` was missing a line (when setting compiler
flags the parent spec was not set to `self`). This resulted in
an inconsistent state of the duplicated Spec. This problem has been
fixed here. The docstring of `Spec._dup` has been updated.
This change is done to avoid inconsistencies during refactoring. The rationale is that functions at different levels in the call stack all define a default for the 'dirty' argument. This PR removes the default value for all the functions except the top-level one (`PackageBase.do_install`).
In this way not defining 'dirty' will result in an error, instead of the default value being used. This will reduce the risk of having an inconsistent behavior after a refactoring.
* Respect --insecure when fetching list_url.
* Ensure support for Python 2.6, and that urlopen works for python versions prior 2.7.9 and between 3.0 and 3.4.3.
* Simplified Spec.__init__ signature by removing the *dep_like argument.
The `*dep_like` argument of `Spec.__init__` is used only for tests. This
PR removes it from the call signature and introduces an equivalent
fixture to be used in tests.
* Refactored ``spec_from_dict`` to be a static method of ``Spec``
The fixture ``spec_from_dict`` has been refactored to be a static method
of ``Spec``. Test code has been updated accordingly. Added tests for
exceptional paths.
* Renamed argument `unique` to `normal` + added LazySpecCache class
As requested in the review the argument `unique` of `Spec.from_literal`
has been renamed to `normal`. To avoid eager evaluations of
`Spec(spec_like)` expressions a subclass of `collections.defaultdict`
has been introduced.
* Spec object can be keys of the dictionary for a spec literal.
Added back the possibility use a spec directly as a key. This permits
to build DAGs that are partially normalized.
- Update handling of ChildError so that its output is capturable from a
SpackCommand
- Update cmd/install test to make sure Python and build log output is
being displayed properly.
- install and probably other commands were designed to run once, but now
we can to test them from within Spack with SpackCommand
- cmd/install.py assumed that it could modify do_install in PackageBase
and leave it that way; this makes the decorator temporary
- package.py didn't properly initialize its stage if the same package had
been built successfully before (and the stage removed).
- manage stage lifecycle better and remember when Package needs to
re-create the stage
- If a failure comes from an external command and NOT the Python code,
display errors highlighted with some context.
- Add some rudimentary support for parsing errors out of the build log
(not very sophisticated yet).
- Build errors in Python code will still display with Python context.
Users can now add an optional custom message to the conflicts directive.
Layout on screen has been changed to improve readability and the long
spec is shown in tree format. Two conflicts in `espresso` have been
modified to showcase the feature.
- Python I/O would not properly interleave (or appear) with output from
subcommands.
- Add a flusing wrapper around sys.stdout and sys.stderr when
redirecting, so that Python output is synchronous with that of
subcommands.
- 'v' toggle was previously only good for the current install.
- subsequent installs needed user to press 'v' again.
- 'v' state is now preserved across dependency installs.
- Previously we would use `os._exit()` in to avoid Spack error handling
in the parent process when build processes failed. This isn't
necessary anymore since build processes propagate their exceptions to
the parent process.
- Use `sys.exit` instead of `os._exit`. This has the advantage of
automatically flushing output streams on quit, so output from child
processes is not lost when Spack exits.
- Simplify interface to log_output. New interface requires only one
context handler instead of two. Before:
with log_output('logfile.txt') as log_redirection:
with log_redirection:
# do things ... output will be logged
After:
with log_output('logfile.txt'):
# do things ... output will be logged
If you also want the output to be echoed to ``stdout``, use the
`echo` parameter::
with log_output('logfile.txt', echo=True):
# do things ... output will be logged and printed out
And, if you just want to echo *some* stuff from the parent, use
``force_echo``:
with log_output('logfile.txt', echo=False) as logger:
# do things ... output will be logged
with logger.force_echo():
# things here will be echoed *and* logged
A key difference between this and the previous implementation is that
*everything* in the context handler is logged. Previously, things like
`Executing phase 'configure'` would not be logged, only output to the
screen, so understanding phases in the build log was difficult.
- The implementation of `log_output()` is different in two major ways:
1. This implementation avoids race cases by using only one pipe (before
we had a multiprocessing pipe and a unix pipe). The logger daemon
stops naturally when the input stream is closed, which avoids a race
in the previous implementation where we'd miss some lines of output
because the parent would shut the daemon down before it was done
with all output.
2. Instead of turning output redirection on and off, which prevented
some things from being logged, this version uses control characters
in the output stream to enable/disable forced echoing. We're using
the time-honored xon and xoff codes, which tell the daemon to echo
anything between them AND write it to the log. This is how
`logger.force_echo()` works.
- Fix places where output could get stuck in buffers by flushing more
aggressively. This makes the output printed to the terminal the same
as that which would be printed through a pipe to `cat` or to a file.
Previously these could be weirdly different, and some output would be
missing when redirecting Spack to a file or pipe.
- Simplify input and color handling in both `build_environment.fork()`
and `llnl.util.tty.log.log_output()`. Neither requires an input_stream
parameter anymore; we assume stdin will be forwarded if possible.
- remove `llnl.util.lang.duplicate_stream()` and remove associated
monkey-patching in tests, as these aren't needed if you just check
whether stdin is a tty and has a fileno attribute.
- Fix issue with color formatting regular expression.
- _separators regex in spec.py could be constructed such that '^' came
first in the character matcher, e.g. '[^@#/]'. This inverts the match
and causes transient KeyErrors.
- Fixed to escape all characters in the constructed regex.
- This bug comes up in Python3 due to its more randomized hash iteration
order, but it could probably also happen in a Python 2 implementation.
- also clean up variable docstrings in spec.py
- Mac OS X Sierra has no /usr/include by default
- Instead of assuming there's an include directory in /usr, mock up a directory that looks like we expect.
This adds sbang hook support for node-js and fixes the sbang filter
for lua (the character class exclusion was swallowing newlines and
reporting a false positive if lua was mentioned anywhere in the
file).
* Docs: Travis-CI Workflow
Add a workflow how to use spack on Travis-CI.
Future Work:
depending if and how we can simplify 5101:
add a multi-compiler, multi-C++-standard, multi-software
build matrix example
* Fix Typos
* Colorize spack info. Adds prominence to preferred version. fixes#2708
This uses 'llnl.util.tty.color' to colorize the output of 'spack info'.
It also displays versions in the order the concretizer would choose
them and shows the preferred in a line on its own and in bold.
* Modified output according to Adam and Denis reviews.
Section titles are not bold + black, but bold + blue. Added a new
section named "Preferred version", which prints the preferred version
in bold characters.
* Further modifications according to Adam and Denis reviews.
After "Homepage:" we now have a single space. Removed newline after each
variant. Preferred version is not in bold fonts anymore. Added a simple
test that just runs the command.
* Improved error message for unsatisfiable specs. fixes#5066
This PR improves the error message for unsatisfiable specs by showing in tree format both the spec that cannot satisfy the constraint and the spec that asked for that constraint. After that follows a readable error message.
This PR allows additional unused properties at the top-level of the config.yaml file. Having these properties permits to use two different versions of Spack, one of which adds a new property, without receiving error messages due to the presence of this new property in a configuration cache stored in the user's home.
This fixes a syntax error in the index.html file generated by the
"spack buildcache" command when creating build caches. This also
fixes support for installing unsigned binaries.
* Refactor IntelInstaller into IntelPackage base class
* Move license attributes from __init__ to class-level
* Flake8 fixes: remove unused imports
* Fix logic that writes the silent.cfg file
* More specific version numbers for Intel MPI
* Rework logic that selects components to install
* Final changes necessary to get intel package working
* Various updates to intel-parallel-studio
* Add latest version of every Intel package
* Add environment variables for Intel packages
* Update env vars for intel package
* Finalize components for intel-parallel-studio package
Adds a +tbb variant to intel-parallel-studio.
The tbb package was renamed to intel-tbb.
Now both intel-tbb and intel-parallel-studio+tbb
provide tbb.
* Overhaul environment variables set by intel-parallel-studio
* Point dependent packages to the correct MPI wrappers
* Never default to intel-parallel-studio
* Gather env vars by sourcing setup scripts
* Use mpiicc instead of mpicc when using Intel compiler
* Undo change to ARCH
* Add changes from intel-mpi to intel-parallel-studio
* Add comment explaining mpicc vs mpiicc
* Prepend env vars containing 'PATH' or separators
* Flake8 fix
* Fix bugs in from_sourcing_file
* Indentation fix
* Prepend, not set if contains separator
* Fix license symlinking broken by changes to intel-parallel-studio
* Use comments instead of docstrings to document attributes
* Flake8 fixes
* Use a set instead of a list to prevent duplicate components
* Fix MKL and MPI library linking directories
* Remove +all variant from intel-parallel-studio
* It is not possible to build with MKL, GCC, and OpenMP at this time
* Found a workaround for locating GCC libraries
* Typos and variable names
* Fix initialization of empty LibraryList
Adds the "buildcache" command to spack. The buildcache command is
used to create gpg signatures for archives of installed spack
packages; the signatures and archives are placed together in a
directory that can be added to a spack mirror. A user can retrieve
the archives from a mirror and verify their integrity using the
buildcache command. It is often the case that the user's Spack
instance is located in a different path compared to the Spack
instance used to generate the package archive and signature, so
this includes logic to relocate the RPATHs generated by Spack.
The action `CleanOrDirtyAction` has been added. It sets the default
value for `dest` to `spack.dirty`, and changes it according to the flags
passed via command line. Added unit tests to check that the arguments
are parsed correctly. Removed lines in `PackageBase` that were setting
the default value of dirty according to what was in the configuration.
Popen.communicate outputs a str object for python2 and a bytes
object for python3. This updates the Executable.__call__ function
to call .decode on the output of Popen.communicate only for python3.
This ensures that Executable.__call__ returns a str for python2 and
python3.
fixes#4236fixes#5002
When a package is defined in more than one repository,
RepoPath.dirname_for_package_name may return the path
to either definition. This sidesteps that ambiguity by
accessing the module associated with the package definition.
* Merged 'purge' command with 'clean'. Deleted 'purge'. fixes#2942
'spack purge' has been merged with 'spack clean'. Documentation has been
updated accordingly. The 'clean' and 'purge' behavior are not mutually
exclusive, and they log brief information to tty while they go.
* Fixed a wrong reference to spack clean in the docs
* Added tests for 'spack clean'. Updated bash completion.
* Typo fixes in docstrings.
* Let OS classes know if the paths they get were explicitly specified by user.
* Fixed regexp for cray compiler version matching.
* Replaced LinuxDistro with CrayFrontend for the Cray platform's frontend.
Fixes#4898
Constraints that were supposed to be conditionally activated for
specified values of a single-valued variant were being activated
unconditionally in the case that the variant was associated with
an implicit dependency. For example if X->Y->Z and Y places a
conditional constraint on Z for a given single-valued variant on
Y, then it would have been applied unconditionally when
concretizing X.
* Add a QMakePackage base class
* Fix sqlite linking bug in qt-creator
* Add latest version of qt-creator
* Add latest version of qwt
* Use raw strings for regular expressions
* Increase minimum required version of qt
* Add comment about specific version of sqlite required
* Fixes for latest version of qwt and qt-creator
* Older versions of Qwt only work with older versions of Qt
* Fix crashes when running spack install under nohup
Fixes#4919
For reasons that I do not entire understand, duplicate_stream() throws
an '[Errno 22] Invalid argument' exception when it tries to
`os.fdopen()` the duplicated file descriptor generated by
`os.dup(original.fileno())`. See spack/llnl/util/lang.py, line
394-ish.
This happens when run under `nohup`, which supposedly has hooked
`stdin` to `/dev/null`.
It seems like opening and using `devnull` on the `input_stream` in
this situation is a reasonable way to handle the problem.
* Be more specific about error being handled.
Only catch the specific error that happens when trying to dup
the stdin that nohup provides.
Catching e as a StandardErorr and then
`type(e).__name__` tells me that it's an OSError.
Printing e.errno tells me that it's 22
Double checking tells me that 22 is EINVAL.
Phew.
- Remove `special_types` dict in spec.py, as only 'all' is still used
- Still allow 'all' to be used as a deptype
- Simplify `canonical_deptype` function
- Clean up args in spack graph
- Add tests
For packages which contain a mix of versions with formats X.Y and
X.Y.Z, if the user entered an X.Y version as a preference in
packages.yaml, Spack would get confused and favor any version A.B.Z
where X=A and Y=B. In the case where there is a mix of these version
types, this commit updates preferences so Spack will favor an exact
match.
* Disable spec colorization when redirecting stdout and add command line flag to re-enable
* Add command line `--color` flag to control output colorization
* Add options to `llnl.util.tty.color` to allow color to be auto/always/never
* Add `Spec.cformat()` function to be used when `format()` should have auto-coloring
* Add universal build_type variant to CMakePackage
* Override build_type in some packages with different possible values
* Remove reference to no longer existent debug variant
* Update CBTF packages with new build_type variant
* Keep note on build size of LLVM
* Change version.up_to() to return Version() object
* Add unit tests for Version.up_to()
* Fix packages that expected up_to() to return a string
* Ensure that up_to() preserves separator characters
* Use version indexing instead of up_to
* Make all Version formatting properties return Version objects
* Update docs
* Tests need to test string representation
Adds SpackCommand class allowing Spack commands to be easily in Python
Example usage:
from spack.main import SpackCommand
info = SpackCommand('info')
out, err = info('mpich')
print(info.returncode)
This allows easier testing of Spack commands.
Also:
* Simplify command tests
* Simplify mocking in command tests.
* Simplify module command test
* Simplify python command test
* Simplify uninstall command test
* Simplify url command test
* SpackCommand uses more compatible output redirection
* Initial work on flag trapping using functions called <flag>_handler and default_flag_handler
* Update packages so they do not obliterate flags
* Added append to EnvironmentModifications class
* changed EnvironmentModifications to have append_flags method
* changed flag_val to be a tuple
* Increased test coverage
* added documentation of flag handling
* Change path to CMakeLists.txt to be relative to root, not pwd
* Changes requested during code review
* Revert back to old naming of root_cmakelists_dir
* Make relative directory more clear in docs
* Revert change causing build_type AttributeError
* Fix forgotten abs_path var
* Update CLHEP with new relative path
* Update more packages with new root_cmakelists_dir syntax
- Lock test can be run either as a node-local test or as an MPI test.
- Lock test is now parametrized by filesystem, so you can test the
locking capabilities of your NFS, Lustre, or GPFS filesystem. See docs
for details.
* mv variants: packages are now needed only during normalization
The relationship among different types of variants have been weakened,
in the sense that now it is permitted to compare MV, SV and BV among
each other. The mechanism that permits this is an implicit conversion
of the variant passed as argument to the type of the variant asking
to execute a constrain, satisfies, etc. operation.
* asbtract variant: added a new type of variant
An abstract variant is like a multi valued variant, but behaves
differently on "satisfies" requests, because it will reply "True"
to requests that **it could** satisfy eventually.
Tests have been modified to reflect the fact that abstract variants
are now what get parsed from expressions like `foo=bar` given by users.
* Removed 'concrete=' and 'normal=' kwargs from Spec.__init__
These two keyword arguments where only used in one test module to force
a Spec to 'appear' concrete. I suspect they are just a leftover from
another refactoring, as now there's the private method '_mark_concrete'
that does essentially the same job. Removed them to reduce a bit the
clutter in Spec.
* Moved yaml related functions from MultiValuedVariant to AbstractVariant.
This is to fix the erros that are occurring in epfl-scitas#73, and that
I can't reproduce locally.
* Parse modules in a way that works for both lmod and tcl
* added test and made method more robust
* refactoring for pythonic clarity
* Improved detection of 'module' shell function + refactored module utilities into spack.util.module_cmd
* Improved regex to reject nested parentheses we are not prepared to handle
* make tests backwards compatible with python 2.6
* Improved regex to account for sh being aliased to bash and used in bash module definition on some systems
* Improve test compatibility with lmod
* Added error for None module_cmd
* Add test for get_module_cmd_from_which()
Add test for get_module_cmd_from_which().
Add -c argument to Popen call to typeset -f module in get_module_cmd_from_bash().
* Increased detection options
Included BASH_FUNC_module() variable outside of typeset as a detection option
This should work on bash even in restricted_shell mode
Kept the typeset detection as an option in case the module function is not exported in bash
Also added try statements to tests, with environment recreation in finally blocks.
* More tests added; some hackiness
* increased test coverage for util/module_cmd
* Code changes to enable system config scope in /etc
Files will go in either /etc/spack or /etc/spack/<platform>
Required minor changes to conftest.
* Updated documentation to match new config scope
- previous code called `which` on $EDITOR, but that doesn't work for
EDITORs like `emacs -nw` or `emacsclient -t -nw`.
- This patch just trusts EDITOR if it is set (same as previous
behavior), and only uses the defaults if it's not.
* issue 4492: added xfailing test, added owner to DependencyMap
* DependencyMap.concrete checks if we have unconditional dependencies
This fixes#4492 and #4107 using some heuristics to avoid an infinite
recursion among Spec.satisfies, Spec.concrete and DependencyMap.concrete
The idea, as suggested by @becker33, is to check just for unconditional
dependencies. This is not covering the whole space and a package with
just conditional dependencies can still fail in the same way. It should
cover though all the **real** packages we have in our repo so far.
* Check for CRAYPE_VERSION instead of path
Architecture tests would fail on Cray since it would not find
the expected path. To make the test correctly work on Cray search
for the CRAYPE version instead.
* Catch SystemExit error in case flake8 not in path
On shared systems having flake8 can involve starting own virtual env.
Skip the test if no flake8 is found to avoid failure reporting.
* Add compatibility to 1.5 svnadmin create
The flag added is needed to correctly create svn repos on NERSC systems.
This could be unnecessary for other sites. I'd like to see others
test before this change gets merged.
- Skip spack flake8 test when flake8 is not installed.
- Fix parsing of dashes in specs broken by new help parser.
- use argparse.REMAINDER instead of narg='?'
- don't interpret parts of specs like -mpi as arguments.
* Initial version of the namd package
* Modified charm to consider compile against intel/intel-mpi
* Correction of namd to compile with intel-mkl and intel compiler
* Adding inclue64 in the prefix
* adding property for the build directory
* removing useless function build
* During install, remove prior unfinished installs
If a user performs an installation which fails, in some cases the
install prefix is still present, and the stage path may also be
present. With this commit, unless the user specifies
'--keep-prefix', installs are guaranteed to begin with a clean
slate. The database is used to decide whether an install finished,
since a database record is not added until the end of the install
process.
* test updates
* repair_partial uses keep_prefix and keep_stage
* use of mock stage object to ensure that stage is destroyed when it should be destroyed (and otherwise not)
* add --restage option to 'install' command; when this option is not set, the default is to reuse a stage if it is found.
- Add a `spack gpg` subcommand in anticipation of signed binaries.
- GPG keys are stored in var/spack/gpg, and the spack gpg command manages them.
- Docs are included on the command.
* Touch up string expansion.
I'm chasing this:
```
$ (module purge; spack install perl %gcc/5.4.0)
==> Error: No installed spec matches the hash: '%s'
```
There's something deeper going on, but the error message isn't helpful.
After this change it tells me this:
```
$ (module purge; spack install perl %gcc/5.4.0)
==> Error: No installed spec matches the hash: '5.4.0'
```
Which is weird because `5.4.0` is not a hash... Whatever is going on here, the error message needs to be fixed.
* Flake8 whitespace
* fix parser
* Removed xfails
* cleaned up debug print statements
* make use of these changes in gcc
* Added comment explaining unreachable line, line left for added protection
* Sphinx no longer supports Python 2.6
* Update vendored sphinxcontrib.programoutput from 0.9.0 to 0.10.0
* Documentation cannot be built in parallel
* Let Travis install programoutput for us
* Remove vendored sphinxcontrib-programoutput
Recent updates to the sphinx package prevent the vendored version
from being found in sys.path. We don't vendor sphinx, so it doesn't
make sense to vendor sphinxcontrib-programoutput either.
PR #3367 inadvertently changed the semantics of _find_recursive and
_find_non_recursive so that the returned list are not ordered as the
input search list. This commit restores the original semantic, and adds
tests to verify it.
Added DFLAGS to the `make.inc` file being written.
These macros are also added to the language specific variables
like CFLAGS, CXXFLAGS and FCFLAGS. Changed `spec.satisfies('foo')`
with `'foo' in spec` in `intel-mkl`, see #4135. Added a basic
build interface to `intel-mpi`.
It seems that parse_anonymous_spec may fail if more than one part
(variant, version range, etc.) is given to the function. Added tests to
code against to fix the problem in #4144.
- Full help is now only generated lazily, when needed.
- Executing specific commands doesn't require loading all of them.
- All commands are only loaded if we need them for help.
- There is now short and long help:
- short help (spack help) shows only basic spack options
- long help (spack help -a) shows all spack options
- Both divide help on commands into high-level sections
- Commands now specify attributes from which help is auto-generated:
- description: used in help to describe the command.
- section: help section
- level: short or long
- Clean up command descriptions
- Add a `spack docs` command to open full documentation
in the browser.
- move `spack doc` command to `spack pydoc` for clarity
- Add a `spack --spec` command to show documentation on
the spec syntax.
* SV variants are evaluated correctly in `when=` statements fixes#4113
The problem here was tricky:
```python
spec.satisfies(other)
```
changes already the MV variants in others into SV variants (where
necessary) if spec is concrete. If it is not concrete it does
nothing because we may be acting at a pure syntactical level.
When evaluating a `when=` keyword spec is for sure not concrete
as it is in the middle of the concretization process. In this case we
have to trigger manually the substitution in other to not end up
comparing a MV variant "foo=bar" to a SV variant "foo=bar" and having
False in return. Which is wrong.
* sv variants: improved error message for typos in "when=" statements
Modifications:
- added support for multi-valued variants
- refactored code related to variants into variant.py
- added new generic features to AutotoolsPackage that leverage multi-valued variants
- modified openmpi to use new features
- added unit tests for the new semantics
This allows people on systems that don't have all the fetchers to still
run Spack tests. Mark tests that require git, subversion, or mercurial to
be skipped if they're not installed.
* Filter all system paths introduced by dependencies from PATH
* Make sure path filtering works *even* for trailing slashes
* Revert some of the changes to `filter_system_paths`
* Yes, `bin64` is a real thing (sigh)
* add tests: /usr, /usr/, /usr/local/../bin, etc.
* Convert from rST to Google-style docstrings
The required hash of a submodule might point to the
non-HEAD commit of the current main branch and hence
would lead to a "no such remote ref" at checkout in
a shallow submodule.
## Motivation
Python installations are both important and unfortunately inconsistent. Depending on the Python version, OS, and the strength of the Earth's magnetic field when it was installed, the name of the Python executable, directory containing its libraries, library names, and the directory containing its headers can vary drastically.
I originally got into this mess with #3274, where I discovered that Boost could not be built with Python 3 because the executable is called `python3` and we were telling it to use `python`. I got deeper into this mess when I started hacking on #3140, where I discovered just how difficult it is to find the location and name of the Python libraries and headers.
Currently, half of the packages that depend on Python and need to know this information jump through hoops to determine the correct information. The other half are hard-coded to use `python`, `spec['python'].prefix.lib`, and `spec['python'].prefix.include`. Obviously, none of these packages would work for Python 3, and there's no reason to duplicate the effort. The Python package itself should contain all of the information necessary to use it properly. This is in line with the recent work by @alalazo and @davydden with respect to `spec['blas'].libs` and friends.
## Prefix
For most packages in Spack, we assume that the installation directory is `spec['python'].prefix`. This generally works for anything installed with Spack, but gets complicated when we include external packages. Python is a commonly used external package (it needs to be installed just to run Spack). If it was installed with Homebrew, `which python` would return `/usr/local/bin/python`, and most users would erroneously assume that `/usr/local` is the installation directory. If you peruse through #2173, you'll immediately see why this is not the case. Homebrew actually installs Python in `/usr/local/Cellar/python/2.7.12_2` and symlinks the executable to `/usr/local/bin/python`. `PYTHONHOME` (and presumably most things that need to know where Python is installed) needs to be set to the actual installation directory, not `/usr/local`.
Normally I would say, "sounds like user error, make sure to use the real installation directory in your `packages.yaml`". But I think we can make a special case for Python. That's what we decided in #2173 anyway. If we change our minds, I would be more than happy to simplify things.
To solve this problem, I created a `spec['python'].home` attribute that works the same way as `spec['python'].prefix` but queries Python to figure out where it was actually installed. @tgamblin Is there any way to overwrite `spec['python'].prefix`? I think it's currently immutable.
## Command
In general, Python 2 comes with both `python` and `python2` commands, while Python 3 only comes with a `python3` command. But this is up to the OS developers. For example, `/usr/bin/python` on Gentoo is actually Python 3. Worse yet, if someone is using an externally installed Python, all 3 commands may exist in the same directory! Here's what I'm thinking:
If the spec is for Python 3, try searching for the `python3` command.
If the spec is for Python 2, try searching for the `python2` command.
If neither are found, try searching for the `python` command.
## Libraries
Spack installs Python libraries in `spec['python'].prefix.lib`. Except on openSUSE 13, where it installs to `spec['python'].prefix.lib64` (see #2295 and #2253). On my CentOS 6 machine, the Python libraries are installed in `/usr/lib64`. Both need to work.
The libraries themselves change name depending on OS and Python version. For Python 2.7 on macOS, I'm seeing:
```
lib/libpython2.7.dylib
```
For Python 3.6 on CentOS 6, I'm seeing:
```
lib/libpython3.so
lib/libpython3.6m.so.1.0
lib/libpython3.6m.so -> lib/libpython3.6m.so.1.0
```
Notice the `m` after the version number. Yeah, that's a thing.
## Headers
In Python 2.7, I'm seeing:
```
include/python2.7/pyconfig.h
```
In Python 3.6, I'm seeing:
```
include/python3.6m/pyconfig.h
```
It looks like all Python 3 installations have this `m`. Tested with Python 3.2 and 3.6 on macOS and CentOS 6
Spack has really nice support for libraries (`find_libraries` and `LibraryList`), but nothing for headers. Fixed.
When a compiler was not found a stacktrace was displayed to user because
there were three arguments to be substituted in a string with only two
substitutions to be done.
Fixes#4026#1167 updated Database.reindex to keep old installation records to
support external packages. However, when a user manually removes a
prefix and reindexes this kept the records so the packages were
still installed according to "spack find" etc. This adds a check
for non-external packages to ensure they are properly installed
according to the directory layout.
- add Version.__format__ to support new-style formatting.
- Python3 doesn't handle this well -- it delegates to
object.__format__(), which raises an error for fancy format strings.
- not sure why it doesn't call str(self).__format__ instead, but that's
hwo things are.
* Properly ignore flake8 F811 redefinition errors
* Add unit tests for flake8 command
* Allow spack flake8 to work on systems with older git
* Skip flake8 unit tests for Python 2.6 and 3.3
* treats correctly a change from `explicit=False` to `explicit=True` in an external package DB entry.
* added unit tests
* fixed issues raised by @tgamblin . In particular the PR is no more hash-changing for packages that are not external.
* added a test to check correctness of a spec/yaml round-trip for things that involve an external
* Don't find external module path at each step of concretization
* it's not necessary.. The paths are retrieved at the end of concretizaion
* Don't find replacements for external packages.
* Test root of the DAG if external
* No reason not to test if the root of the DAG is external when external
packages are now first class citizens!
* Create `external` property for Spec (for external_path and external_module)
* Allow users to specify external package paths relative to spack
* Canonicalize external package paths so that users may specify their
locations relative to spack's directory.
* Update tests to use new external_path and external properly.
* skip license hooks on external
- Spack doesn't need eggs -- it manages its own directories
- Simplify install layout and reduce sys.path searches by installing all
packages flat (eggs are deprecated for wheels, and this is also what
wheels do).
- We now supply the --single-version-externally-managed argument to
`setup.py install` for setuptools packages and setuptools.
- modify packages to only use setuptools args if setuptools is an
immediate dependency
- Remove setuptools from packages that do not need it.
- Some packages use setuptools *only* when certain args (likeb
'develop' or 'bdist') are supplied to setup.py, and they specifically
do not use setuptools for installation.
- Spack never calls setup.py this way, so just removing the setuptools
dependency works for these packages.
* fetch git submodules recursively
This is useful if the submodules have submodules themselves. On
the other hand doing a recursive update doesn't hurt if there
is only one level.
* fetch submodules with depth=1 as well (fix#2190)
* use git submodule with depth only for git>=1.8.4
- Spack install would previously fail if it could not load a package for
the thing being uninstalled.
- This reworks uninstall to handle cases where the package is no longer
known, e.g.:
a) the package has been renamed or is no longer in Spack
b) the repository the package came from is no longer registered in
repos.yaml
- gcc on macOS says it's version 4.2.1, but it's really clang, and it's
actually the *same* clang as the system clang.
- It also doesn't respond with a full path when called with
--print-file-name=libstdc++.dylib, which is expected from gcc in abi.py.
Instead, it gives a relative path and _gcc_compiler_compare doesn't
understand what to do with it. This results in errors like:
```
lib/spack/spack/abi.py, line 71, in _gcc_get_libstdcxx_version
libpath = os.readlink(output.strip())
OSError: [Errno 2] No such file or directory: 'libstdc++.dylib'
```
- This commit does two things:
1. Ignore any gcc that's actually clang in abi.py. We can probably do
better than this, but it's not clear there is a need to, since we
should handle the compiler as clang, not gcc.
2. Don't auto-detect any "gcc" that is actually clang anymore. Ignore
it and expect people to use clang (which is the default macOS
compiler anyway).
Users can still add fake gccs to their compilers.yaml if they want, but
it's discouraged.
* Checksum code wasn't opening binary files as binary.
- Fixes Python 3 issue where files are opened as unicode text by default,
and decoding fails for binary blobs.
* Simplify fetch test parametrization.
* - add tests for URL fetching and checksumming.
- fix coverage on interface functions in FetchStrategy superclass
- add some extra crypto tests.
* Package install remove prior unfinished installs
Depending on how spack is terminated in the middle of building a
package it may leave a partially installed package in the install
prefix. Originally Spack treated the package as being installed if
the prefix was present, in which case the user would have to
manually remove the installation prefix before restarting an
install. This commit adds a more thorough check to ensure that a
package is actually installed. If the installation prefix is present
but Spack determines that the install did not complete, it removes
the installation prefix and starts a new install; if the user has
enabled --keep-prefix, then Spack reverts to its old behavior.
* Added test for partial install handling
* Added test for restoring DB
* Style fixes
* Restoring 2.6 compatibility
* Relocated repair logic to separate function
* If --keep-prefix is set, package installs will continue an install from an existing prefix if one is present
* check metadata consistency when continuing partial install
* Added --force option to make spack reinstall a package (and all dependencies) from scratch
* Updated bash completion; removed '-f' shorthand for '--force' for install command
* dont use multiple write modes for completion file
* Add tests to mercurial package
* Add support for --insecure with mercurial fetching
* Install man pages and tab-completion scripts
* Add tests and latest version for all deps
* Flake8 fix
* Use certifi module to find CA certificate
* Flake8 fix
* Unset PYTHONPATH when running hg
* svn_fetch should use to svn-test, not hg-test
* Drop Python 3 support in Mercurial
Python 3 support is a work in progress and isn't currently
recommended:
https://www.mercurial-scm.org/wiki/SupportedPythonVersions
* Test both secure and insecure hg fetching
* Test both secure and insecure git and svn fetching
`set_executable` now checks if a user/group.other had read permission
on a file and if it does then it sets the corresponding executable
bit.
See #1483.
Fixes#2587
The concretizer falls back on using the root architecture (followed
by the default system architecture) to fill in unspecified arch
properties for a spec. It failed to check cases where the root could
be None.
* Remove fake URLs from Spack
* Ignore long lines for URLs that start with ftp:
* Preliminary changes to version regexes
* New redesign of version regexes
* Allow letters in version-only
* Fix detection of versions that end in Final
* Rearrange a few regexes and add examples
* Add tests for common download repositories
* Add test cases for common tarball naming schemes
* Finalize version regexes
* spack url test -> spack url summary
* Clean up comments
* Rearrange suffix checks
* Use query strings for name detection
* Remove no longer necessary url_for_version functions
* Strip off extraneous information after package name
* Add one more test
* Dot in square brackets does not need to be escaped
* Move renaming outside of parse_name_offset
* Fix versions for a couple more packages
* Fix flake8 and doc tests
* Correctly parse Python, Lua, and Bio++ package names
* Use effective URLs for mfem
* Add checksummed version to mitos
* Remove url_for_version from STAR-CCM+ package
* Revert changes to version numbers with underscores and dashes
* Fix name detection for tbb
* Correctly parse Ruby gems
* Reverted mfem back to shortened URLs.
* Updated instructions for better security
* Remove preferred=True from newest version
* Add tests for new `spack url list` flags
* Add tests for strip_name_suffixes
* Add unit tests for version separators
* Fix bugs related to parseable name but in parseable version
* Remove dead code, update docstring
* Ignore 'binary' at end of version string
* Remove platform from version
* Flip libedit version numbers
* Re-support weird NCO alpha/beta versions
* Rebase and remove one new fake URL
* Add / to beginning of regex to avoid picking up similarly named packages
* Ignore weird tar versions
* Fix bug in url parse --spider when no versions found
* Less strict version matching for spack versions
* Don't rename Python packages
* Be a little more selective, version must begin with a digit
* Re-add fake URLs
* Fix up several other packages
* Ignore more file endings
* Add parsing support for Miniconda
* Update tab completion
* XFAILS are now PASSES for 2 web tests
- _spider in web.py was actually failing to spider deeper than a certain
point.
- Fixed multiprocessing pools to not use daemons and to allow recursive
spawning.
- Added detailed tests for spidering and for finding archive versions.
- left some xfail URL finding exercises for the reader.
- Fix noqa annotations for some @when decorators
- Clean up spec_syntax tests: don't dependend on DB order.
- spec_syntax hash parsing tests were strongly dependent on the order the
DB was traversed.
- Tests now specifically grab the specs they want from the mock DB.
- Tests are more readable as a result.
- Add Python3 versions to Travis tests.
1. Fix#2807: Can't depend on virtual and non-virtual package
- This is tested by test_my_dep_depends_on_provider_of_my_virtual_dep in
the concretize.py test.
- This was actually working in the test suite, but it depended on the
order the dependencies were resolved in. Resolving non-virtual then
virtual worked, but virtual, then non-virtual did not.
- Problem was that an unnecessary copy was made of a spec that already
had some dependencies set up, and the copy lost half of some of the
dependency relationships. This caused the "can'd depend on X twice
error".
- Fix by eliminating unnecessary copy and ensuring that dep parameter of
_merge_dependency is always safe to own -- i.e. it's a defensive copy
from somewhere else.
2. Fix bug and simplify concretization of deptypes.
- deptypes weren't being accumulated; they were being set on each
DependencySpec. This could cause concretization to get into an infinite
loop.
- Fixed by accumulating deptypes in DependencySpec.update_deptypes()
- Also simplified deptype normalization logic: deptypes are now merged in
constrain() like everything else -- there is no need to merge them
specially or to look at dpeendents in _merge_dependency().
- Add some docstrings to deptype tests.
- Get rid of pkgsort() usage for preferred variants.
- Concretization is now entirely based on key-based sorting.
- Remove PreferredPackages class and various spec cmp() methods.
- Replace with PackagePrefs class that implements a key function for
sorting according to packages.yaml.
- Clear package pref caches on config test.
- Explicit compare methods instead of total_ordering in Version.
- Our total_ordering backport wasn't making Python 3 happy for some
reason.
- Python 3's functools.total_ordering and spelling the operators out
fixes the problem.
- Fix unicode issues with spec hashes, json, & YAML
- Try to use str everywhere and avoid unicode objects in python 2.
- Remove ascii encoding assumption from spack_yaml
- proc.communicate() returns bytes; convert to str before adding.
- Fix various byte string/unicode issues for Python 2/3 support
- Need to decode subprocess output as utf-8 in from_sourcing_files.
- Fix comments in strify()
- convert print, StringIO, except as, octals, izip
- convert print statement to print function
- convert StringIO to six.StringIO
- remove usage of csv reader in Spec, in favor of simple regex
- csv reader only does byte strings
- convert 0755 octal literals to 0o755
- convert `except Foo, e` to `except Foo as e`
- fix a few places `str` is used.
- may need to switch everything to str later.
- convert iteritems usages to use six.iteritems
- fix urllib and HTMLParser
- port metaclasses to use six.with_metaclass
- More octal literal conversions for Python 2/3
- Fix a new octal literal.
- Convert `basestring` to `six.string_types`
- Convert xrange -> range
- Fix various issues with encoding, iteritems, and Python3 semantics.
- Convert contextlib.nested to explicitly nexted context managers.
- Convert use of filter() to list comprehensions.
- Replace reduce() with list comprehensions.
- Clean up composite: replace inspect.ismethod() with callable()
- Python 3 doesn't have "method" objects; inspect.ismethod returns False.
- Need to use callable in Composite to make it work.
- Update colify to use future division.
- Fix zip() usages that need to be lists.
- Python3: Use line-buffered logging instead of unbuffered.
- Python3 raises an error with unbuffered I/O
- See https://bugs.python.org/issue17404
- Update YAML version to support Python 3
- Python 3 support for ordereddict backport
- Exclude Python3 YAML from version tests.
- Vendor six into Spack.
- Make Python version-check tests work with Python 3
- Add ability to add version check exceptions with '# nopyqver' line
comments.
* Run python setup.py test if --run-tests
* Attempt to import the Python module after installation
* Add testing support to numpy and scipy
* Remove duplicated comments
* Update to new run-tests callback methodology
* Remove unrelated changes for another PR
* perl: make extendable and add Module::Build package
* perl: allow 'spack create' to identify perl packages from their contents
* perl-module-build: fix indenting of package docstring
* perl: split install() method for extensions into phases
* perl: auto-detect build method (Makefile.PL vs Build.PL) and define a 'check' method
* PerlPackage: use import statements similar to those in AutotoolsPackage
* PerlModule: fix detection of Build.PL
* PerlPackageTemplate: remove extraneous lines to avoid flake8 warnings
* PerlPackageTemplate: split into separate templates for Makefile.PL and Build.PL
* PerlPackage: add cross-references to docstrings
* AutotoolsPackage: fix ambiguous cross-references to avoid errors in doc tests
* PerlbuildPackageTemplate: depend on perl-module-build if Build.PL exists
- Spack find would fail with "unknown namespace" for some queries when a
package from an unknown namespace was installed.
- Solve by being conservative: assume unknown packages are NOT providers
of virtual dependencies.
- deactivate -a wouldn't work if the installation's package was no longer
available.
- Fix installed_extensions_for so that it doesn't need to look at the
package.py file.
This fixes the problem described in #3374, which describes `spack find` ignore explicit/implicit.
I believe that this was broken in #2626.
This restores the behavior of implicit/explicit for me.
I believe that it does not screw anything else up, but ....
* Order listed compiler sections
"spack compiler list" output compiler sections in an arbitrary order.
With this commit compiler sections are ordered primarily by compiler
name and then by operating system and target.
* Compiler search lists config files with compilers
If a compiler entry is already defined in a configuration file that
the user does not know about, they may be confused when that compiler
is not added by "spack compiler find". This commit adds a message at
the end of "spack compiler find" to inform the user of the locations
of all config files where compilers are defined.
Fixes#1476
Concretization uses compilers defined in config files and if those
are not available defaults to searching typical paths where the
detected operating system would have a compiler. If there is an OS
update, the detected OS can change; in this case all compilers
defined in the config files would no longer match (because they would
be associated with the previous OS version). The error message in
this case was too vague. This commit adds logic for detecting when it
is likely that the OS has been updated (in particular when that
affects compiler concretization) and improves the information provided
to the user in the error message.
* Dont propagate flags between different compilers
Fixes#2786
Previously when a spec had no parents with an equivalent compiler,
Spack would default to adding the compiler flags associated with the
root of the DAG. This eliminates that default.
* added test for compiler flag propagation
* simplify compiler flag propagation logic
Fixes#3428
Users can run 'spack compiler find' to automatically initialize their
compilers.yaml configuration file. It also turns out that Spack will
implicitly initialize the compilers configuration file as part of
detecting compilers if none are found (so if a user were to attempt to
concretize a spec without running 'spack compiler find' it would not
fail). However, in this case Spack was overlooking its own implicit
initialization of the config files and would report that no new
compilers were found. This commit removes implicit initialization when
the user calls 'spack compiler find'.
This did not surface until #2999 because the 'spack compiler' command
defaulted to using a scope 'user/platform' that was not accounted for
in get_compiler_config (where the implicit initialization logic
predates the addition of this new scope); #2999 removed the scope
specification when checking through config files, leading to the
implicit initialization.
Previously, this would fail with a NoSuchMethodError:
class Package(object):
# this is the default implementation
def some_method(self):
...
class Foo(Package):
@when('platform=cray')
def some_method(self):
...
@when('platform=linux')
def some_method(self):
...
This fixes the implementation of `@when` so that the superclass method
will be invoked when no subclass method matches.
Adds tests to ensure this works, as well.
* default scope for config command is made consistent with cmd/__init__ default
* dont specify a scope when looking for compilers with a matching spec (since compiler concretization is scope-independent)
* config edit should default to platform-specific file only for compilers
* when duplicate compiler specs are detected, the exception raised now points the user to the files where the duplicates appear
* updated error message to emphasize that a spec is duplicated (since multiple specs can reference the same compiler)
* 'spack compilers' is now also broken down into sections by os and target
* Added tests for new compiler methods
Modifications:
- `dump_packages` copies build dependencies into `$prefix/.spack`, as well as the link/run dependencies that we already copied there.
- fake installs copy dependency packages into `$prefix/.spack` as well
- Added a new interface for Specs to pass build information
- Calls forwarded from Spec to Package are now explicit
- Added descriptor within Spec to manage forwarding
- Added state in Spec to maintain query information
- Modified a few packages (the one involved in spack install pexsi) to showcase changes
- This uses an object wrapper to `spec` to implement the `libs` sub-calls.
- wrapper is returned from `__getitem__` only if spec is concrete
- allows packagers to access build information easily
It seems the tests in `packages.py` were running just because we had a specific order of execution. This should fix the problem, and make the test_suite more resilient to running order.
- Fix format printing to match command line for hashes and full name formats
- Update spack graph to use new format
- Changed format string signifier for hashes from `$#` to `$/`
Modules generated by the module creation machinery currently print out
a notice that warnts the user that things are being autoloaded. In
some situations those warnings are problematic. See #2754 for
discussion.
This is a first cut at optionally disabling the warning messages:
- adds a helper tothe EnvModule base class that encapsulates the
config file variable;
- adds a method to the base class that provides a default (empty)
code fragment for generating a warning message;
- passes the warning fragment into the bit that formats the autoload
string;
- adds specialized autload_warner() methods in the tcl and lmod
subclasses;; and finally
- touches up the autoload_format strings in the specialized classes.
Add the ability to the modules generation process to blacklist
packages that were installed implicitly. One can still whitelist
modules that were installed implicitly.
This changes adds a `blacklist_implicts` boolean as a peer to the
`whitelist` and `blacklist` arrays, e.g.:
```
modules:
enable::
- lmod
lmod:
whitelist:
- 'lua'
- 'py-setuptools'
blacklist:
- '%gcc@4.8.3'
blacklist_implicits: True
```
It adds a small helper in `spec.py` and then touches up the package
filtering code in `modules.py`.
* Replace `spack urls` and `spack url-parse` with `spack url`
* Allow spack url list to only list incorrect parsings
* Add spack url test reporting
* Add unit tests for new URL commands
* Add several new R packages
* Add a few more R packages
* Update more versions
* Convert Package to RPackage
* Add a few more packages
* Add missing dependencies
* AutotoolsPackage: added configure_directory to permit build out of source. The configure script executable is now invoked with an absolute path. Modified a few packages accordingly.
* build_systems: functions returning directories are now properties
* build_systems: fixed issues with tcl and tk
* AutotoolsPackage: reworked recipe for autoreconf
* Spec.satisfies accesses Spec.concrete as property
Fixes#2760
When copying a spec, _concrete is always set to False for each
dependency. "Spec.satisfies" was accessing the member "_concrete"
directly instead of using the property "concrete". This means that
if you copy a spec, the dependencies will be considered equal, but
did not necessarily satisfy one another. Spec.satisfies is a
prerequisite for a package to be considered an extension; as a
consequence, an extension with run-time dependencies that were also
extensions did not activate those extensions. This updates
Spec.satisfies to avoid checking the cached member "_concrete"
directly.
* Added test to check for activation of dependency extension
* Added test to check for transitive satisfiability between a spec and its copy
- Allows hashes to be specified after other parts of the spec
- Does not allow other parts of the spec to be specified after the hash
- The hash must either end input or be followed by another separate spec
- The next spec cannot be an anonymous spec (it must start with a package name or a hash)
See #2769 (after it was merged) for further discussion of this interface addition. That discussion resulted in these requirements:
```
python # 1 spec
/abc123 # 1 spec
python /abc123 # 1 spec
/456789 # 1 spec
python /abc123 /456789 # 2 specs
python /456789 /abc123 # 2 specs
/abc123 /456789 # 2 specs
/456789 /abc123 # 2 specs
/456789 /abc123 python # 3 specs
```
assuming `abc123` and `456789` are both hashes of different python specs.
* Add support for IBM threaded compilers, xl*_r
Added new compiler class, xl_r; added default flags to the compilers.yaml file.
* Add cppflags to the set of default flags to be added to the compilers stanza in compiler.yaml.
These flags are optional. Only defined flags will be listed in the compilers.yaml file.
* Fix scripting warnings revealed by flake8.
Updated __init__.py and xl_r.py to conform with flake8 rules.
* Add justification to the definition of the XL default compiler flags.
* PackageMeta: `run_before` is an alias of `precondition`, `run_after` an alias of `sanity_check`
* PackageMeta: removed `precondition` and `sanity_check`
* PackageMeta: decorators are now free-standing
* package: modified/added docstrings. Fixed the semantics of `on_package_attributes`.
* package: added unit test assertion as side effects of install
* build_systems: factored build-time test running into base class
* r: updated decorators in package.py
* docs: updated decorator names
* documentation: reworked packaging guide to add build-system phases
* documentation: improvements to AutotoolsPackage autodocs
* build_systems: updated autodocs
* run-tests: added a few information on how to run tests fixes#2606 fixes#2605
* documentation: fixed items brought up by @davydden
* typos in docs
* consistent use of 'build system' (i.e. removed 'build-system' from docs)
* added a note on possible default implementations for build-time tests
* documentation: fixed items brought up by @citibeth
* added note to explain the difference between build system and language used in a package
* capitalized bullet items
* added link to API docs
* documentation: fixed multiple cross-references after rebase
* documentation: fixed minor issues raised by @tgamblin
* documentation: added entry in table for the `PythonPackage` class
* docs: fixed issues brought up by @citybeth in the second review
Previously, fix_darwin_install_name would only handle dependencies that have no path set, and it ignore dependencies that have the build directory as path baked in. Catch this, and replace it by the install directory.
- Add a PythonPackage class with build system support.
- Support build phases in PythonPackage
- Add a custom sanity check for PythonPackages
- Get rid of nolink dependencies in python packages
- Update spack create to use new PythonPackage class
- Port most of Python packages to new PythonPackage class
- Conducted a massive install and activate of Python packages.
- Fixed bugs introduced by install and activate.
- Update API docs on PythonPackage
* Initial changes to spack create command
* Get 'spack create <url>' working again
* Simplify call to BuildSystemGuesser
* More verbose output of spack create
* Remove duplicated code from spack create and spack checksum
* Add better documentation to spack create docstrings
* Fix pluralization bug
* Flake8
* Update documentation on spack create and deprecate spack edit --force
* Make it more obvious when we are renaming a package
* Further deprecate spack edit --force
* Fix unit tests
* Rename default template to generic template
* Don't add automake/autoconf deps to Autotools packages
* Remove changes to default $EDITOR
* Completely remove all traces of spack edit --force
* Remove grammar changes to make the PR easier to review
* Fixed parser to eliminate need for escape quotes. TODO: Fix double call to shlex, fix spaces in spec __str__
* Fixed double shlex
* cleanup
* rebased on develop
* Fixed parsing for multiple specs; broken since #360
* Revoked elimination of the `-` sigil in the syntax, and added it back into tests
* flake8
* more flake8
* Cleaned up dead code and added comments to parsing code
* bugfix for spaces in arguments; new bug found in testing
* Added unit tests for kv pairs in parsing/lexing
* Even more flake8
* ... yet another flake8
* Allow multiple specs in install
* unfathomable levels of flake8
* Updated documentation to match parser fix
* Added customization for make targets in 'build' and 'install' phases for CMakePackage
* Use rst in build system docs so that Sphinx generates nice API docs
* Allow AutotoolsPackages to be built in a different directory
* Flake8
* Fix missing import
* Allow configure to be located in different directory
* Update espressopp to use build targets
* Flake8
* Sphinx fix, lists must be a new paragraph
* Back out change that allowed a configure script in a different directory than build_directory
* Add missing deps, build in parallel
* Missing space for rst list
* Removing the nobuild, nolink, and alldeps dependency types in favor of being explicit.
* This will help with maintenance going forward, as adding more dependency types won't affect existing declared dependencies in weird ways.
* default deptype is still `('build', 'link')`
* Rename packages
* Upcasing depends_on() in packages.
* Downcased extends('r')
* Fixed erroneously changed URL that had slipped through.
* Fixed typo
* Fixed link from documentation into package source code.
* Fixed another doc problem.
* Changed underscores to dashes in package names.
* Added test to enforce lowercase, no-underscore naming convention.
* Fix r-xgboost
* Downcase more instances of 'R' in package auto-creation.
* Fix test.
* Converted unit test packages to use dashes not underscores
* Downcase `r` in the docs.
* Update module_file_support.rst
Fix r->R for class R.
* Porting: substitute nose with ytest
This huge commit substitutes nose with pytest as a testing system. Things done here:
* deleted external/nose as it is no longer used
* moved mock resources in their own directory 'test/mock/'
* ported two tests (cmd/find, build_system) to pytest native syntax as an example
* build_environment, log: used monkeypatch instead of try/catch
* moved global mocking of fetch_cache to an auto-used fixture
* moved global mocking from test/__init__.py to conftest.py
* made `spack test` a wrapper around pytest
* run-unit-tests: avoid running python 2.6 tests under coverage to speed them up
* use `pytest --cov` instead of coverage run to cut down testing time
* mock/packages_test: moved mock yaml configuration to files instead of leaving it in the code as string literals
* concretize.py: ported tests to native pytest, reverted multiprocessing in pytest.ini as it was creating the wrong report for coveralls
* conftest.py, fixtures: added docstrings
* concretize_preferences.py: uses fixtures instead of subclassing MockPackagesTest
* directory_layout.py: uses fixtures instead of subclassing MockPackagesTest
* install.py: uses fixtures instead of subclassing MockPackagesTest
* optional_deps.py: uses fixtures instead of subclassing MockPackagesTest
optional_deps.py: uses fixtures instead of subclassing MockPackagesTest
* packages.py: uses fixtures instead of subclassing MockPackagesTest
* provider_index.py: uses fixtures instead of subclassing MockPackagesTest
* spec_yaml.py: uses fixtures instead of subclassing MockPackagesTest
* multimethod.py: uses fixtures instead of subclassing MockPackagesTest
* install.py: now uses mock_archive_url
* git_fetch.py: uses fixtures instead of subclassing MockPackagesTest
* hg_fetch.py: uses fixtures instead of subclassing MockPackagesTest
* svn_fetch.py, mirror.py: uses fixtures instead of subclassing MockPackagesTest
repo.py: deleted
* test_compiler_cmd.py: uses fixtures instead of subclassing MockPackagesTest
* cmd/module.py, cmd/uninstall.py: uses fixtures instead of subclassing MockDatabase
* database.py: uses fixtures instead of subclassing MockDatabase, removed mock/database
* pytest: uncluttering fixture implementations
* database: changing the scope to 'module'
* config.py: uses fixtures instead of subclassing MockPackagesTest
* spec_dag.py, spec_semantics.py: uses fixtures instead of subclassing MockPackagesTest
* stage.py: uses fixtures instead of subclassing MockPackagesTest. Removed mock directory
* pytest: added docstrings to all the fixtures
* pytest: final cleanup
* build_system_guess.py: fixed naming and docstrings as suggested by @scheibelp
* spec_syntax.py: added expected failure on parsing multiple specs closes#1976
* Add pytest and pytest-cov to Spack externals.
* Make `spack flake8` ignore externals.
* run-unit-tests runs spack test and not pytest.
* Remove all the special stuff for `spack test`
- Remove `conftest.py` magic and all the special case stuff in `bin/spack`
- Spack commands can optionally take unknown arguments, if they want to
handle them.
- `spack test` is now a command like the others.
- `spack test` now just delegates its arguments to `pytest`, but it does
it by receiving unknown arguments and NOT taking an explicit
help argument.
* Fix error in fixtures.
* Improve `spack test` command a bit.
- Now supports an approximation of the old simple interface
- Also supports full pytest options if you want them.
* Use external coverage instead of pytest-cov
* Make coverage use parallel-mode.
* change __init__.py docs to include pytest
* inheritance of directives: using meta-classes to inject attributes coming from directives into packages + lazy directives
* _dep_types -> dependency_types
* using a meta-class to inject directives into packages
* directives are lazy
fixes#2466
* directives.py: allows for multiple inheritance. Added blank lines as suggested by @tgamblin
* directives.py: added a test for simple inheritance of directives
* Minor improvement requested by @tgamblin
CMakePackage: importing names from spack.directives
directives: wrap __new__ to respect pep8
* Refactoring requested by @tgamblin
directives: removed global variables in favor of class variables. Simplified the interface for directives (they return a callable on a package or a list of them).
* Ensure that every package has a license
Also fixes URLs with http://http:// doubled.
This is a continuation of #2656.
* Add license to every file in Spack
* Make sure Todd is the author of all packages
* Fix flake8 tests
* Don't license external Sphinx docs
* Don't display licenses in tutorial example packages
Also fixes typos and converts command-line examples
from tcsh to bash, which is more common
That's because in set_build_environment_variables()
the funciton filter_system_paths() is actually applied to
package prefixes, and not to prefix/lib or prefix/include.
The primary goal of #2292 was to use the frontend compiler to make
build dependencies like cmake on HPC platforms. It turns out that
while this works in some cases, it did not handle cases where a
package was a link dependency of the root and of a build dependency
(and could produce incorrect concretizations which would not build).
* Better output for disambiguate_specs()
* Fix wrong exception name.
* Fix satsifies(): concrete specs require matching by hash.
- Fixes uninstall by hash and other places where we need to match a
specific spec.
- Fix an error in provider_index (satisfies() call was backwards)
- Fix an error in satisfies_dependencies(): checks were too shallow.
* Fix default args in Spec.tree()
* Move installed_dependents() to DB to avoid unknown package error.
* Make `spack find` and `sapck.store.db.query()` faster for hashes.
* Add a test to ensure satisfies() respects concrete Specs' hashes.
* Customization for make targets in build and test phases for AutotoolsPackage
* Updated Blitz++ to use customized make build and test targets
* Removed flake8 error
* Removed make test customization, added make install customization, need to figure out issues with multiple make targets
* Changed build_targets and install_targets to normal attributes
* MakefilePackage: changed build_args and install_args for consistency with #2464
openblas: derives from MakefilePackage
* MakefilePackage: changed default edit behavior
* Better cxx11/14 flags for GNU/Clang/Intel
- GCC 4.8 only supports -std=c++1y for C++14
- Use CMake's rules for AppleClang to set cxx11 and cxx14 flags based on
Apple Xcode/LLVM version
- Use CMake's rules for Intel to add support for cxx14 flags based on
Intel version.
* Add cxx17_flag property
Implement property in compiler for c++17 as per those for c++11/14.
Add concrete support for GNU/Clang:
- Return -std=c++1z for GCC 5 and above per GCC documentation
- Return -std=c++1z for Clang 3.5 and above per Clang documentation
- Return -std=c++1z for Apple LLVM 6.1 and above per CMake's rules
* Update `spack setup` and `spack graph` to be consistent with c557e765 and 9347f869. Fixes#2316.
* Added another "fix" necessary to make `spack setup` work.
* Added another "fix" necessary to make `spack setup` work. (reverted from commit 7f0d3ecb38c97ec00491d7cd66b4266e3018b1ca)
* Add documentation for repositories and namespaces.
* Update and extend repository documentation per review.
- Also add `-N` argument for `spack spec`
The advanced [Uninstalling Packages](spack.readthedocs.io/en/latest/tutorial_sc16_spack_basics.html#uninstalling-packages) via hash has a couple missing `.. code-block:: console` directives ;)
I have no idea what branch to direct this to though...
* clang: do xcode mockup iff requested by a package
* add a note
* add pkg to setup_custom_environment() and decide whether or not to use mockup XCode there based on the package
* Make targets an attribute of compilers, similar to OS. Allows users to use `spack compiler find` to add compilers for the same platform/os but different targets when spack is installed on a file system mounted on machines with different targets.
* Changed get_compilers() method to treat old compilers with no target as target='any'
* flake8 changes
* Address change requests for comments/code clarity
Fixes#2306
Any dependency explicitly mentioned in a spec string ended up with the
build and link deptypes unconditionally. This fixes dependency
resolution to ensure that packages which are mentioned in the spec
string have their deptypes determined by the dependency information
in the package.py files. For example if a package has cmake as a build
dependency, and cmake is mentioned as a dependency in the spec string
for the package, then it ends up with just the build deptype.
Packages built targeting a backend may depend on packages like cmake
which can be built against the frontend. With this commit, any build
dependency or child of a build dependency will target the frontend by
default. In compiler concretization when packages copy compilers from
nearby packages, build dependencies use compiler information from
other build dependencies, and link dependencies avoid using compiler
information from build dependencies.
* Use JSON for the database instead of YAML.
- JSON is much faster than YAML *and* can preserve ordered keys.
- 170x+ faster than Python YAML when using unordered dicts
- 55x faster than Python YAML (both using OrderedDicts)
- 8x faster than C YAML (with OrderedDicts)
- JSON is built into Python, unlike C YAML, so doesn't add a dependency.
- Don't need human readability for the package database.
- JSON requires no major changes to the code -- same object model as YAML.
- add to_json, from_json methods to spec.
* Add tests to ensure JSON and YAML don't need to be ordered in DB.
* Write index.json first time it's not found instead of requiring reindex.
* flake8 bug.
* Added some notes about how multiarch detection could be fixed.
* Implemented a preliminary version of the "spack.spec.ArchSpec" class.
* Updated the "spack.spec.Spec" class to use "ArchSpec" instead of "Arch".
* Fixed a number of small bugs in the "spack.spec.ArchSpec" class.
* Fixed the 'Concretizer.concretize_architecture' method so that it uses the new architecture specs.
* Updated the package class to properly use arch specs.
Removed a number of unused architecture functions.
* Fixed up a number of bugs that were causing the regression tests to fail.
Added a couple of additional regression tests related to architecture parsing/specification.
Fixed a few bugs with setting reserved os/target values on "ArchSpec" objects.
Removed a number of unnecessary functions in the "spack.architecture" and "spack.concretize" modules.
* Fixed a few bugs with reading architecture information from specs.
Updated the tests to use a uniform architecture to improve reliability.
Fixed a few minor style issues.
* Adapted the compiler component of Spack to use arch specs.
* Implemented more test cases for the extended architecture spec features.
Improved error detection for multiple arch components in a spec.
* Fix for backwards compatibility with v0.8 and prior
* Changed os to unknown for compatibility specs
* Use `spack09` instead of `spackcompat` for the platform of old specs.
Different compilers have different flags for PIC (position-independent
code). This patch provides a common ground to accessing it inside specs.
See discussions in #508 and #2373. This patch does not address the issue
of mixed compilers as mentioned in #508.
Package provides a 'list_url' attribute which may be searched to find
download links. #1822 created a slowdown for all tests by always
searching this URL. This reenables dynamic search only in cases where
all other fetchers fail. This also only enables dynamic search when
'mirror_only' is set to false.
The option -s now causes file and line number information to be printed
along with any invocation of msg, info, etc...
This will greatly ease debugging.
- Seems like older git versions won't be able to clone an LFS repo.
- Reverting to an external link for the slides to avoid storing an 8MB
file in the repo and to avoid using git LFS.
* Allow compiler wrapper to modify environment
This adds the ability to set environment variables in the compiler
wrappers. These are specified as part of the compilers.yaml config.
The user may also specify RPATHs in compilers.yaml that should be
added.
* Minor doc tweak
* Waste less space when fetching cached archives, simplify fetch messages.
- Just symlink cached files into the stage instead of copying them with curl.
- Don't copy linked files back into the cache when done fetching.
* Fixes for review.
* more updates
* last update
Not the desired eventual behavior, but cflag subset matching is not currently working for anonymous specs and this provides a temporary solution by restricting the feature until it is fixed.
* Wordsmithing/minor-edits to module tutorial
A small set of wordsmithing, spell checking and minor edits to the fancy
new modules tutorial!
* Fix typo (sneaky z key...)
* Fix "S:" and "manual<" typos
Some packages which include resources fetched from source control
repositories terminated package installs because they failed to
archive; specifically, this included all SCM resources which identify
a specific state of the repo - for example a revision in svn or a
tag/revision in git. This is because the resource stage creation
logic did not choose an appropriate archive name for these kinds of
resources.
* module files tutorial : first complete draft
- first complete draft for module files tutorial
- minor corrections to module file reference
* module file tutorial : first batch of corrections
- module avail spelled out fully
- typos from @adamjstewart
- rewording of a few sentences
* module file tutorial : first batch of corrections
- emphasized lines in yaml files
* module file tutorial : fixes according to @citibeth and @adamjstewart reviews
- used long format for command options
- reworded unclear sentence on tokes
- reworked table in reference manual to make it clearer
* module file tutorial : implemented corrections collected on site from @schlyfts
* module file tutorial : removed comment (@hartzell suggestion)
* Add options for hashes, tree depth, and YAML to `spack spec`.
- Can now display hashes with `spack spec`, like `spack find`.
- Removed the old "ids" argument to `spack spec` (which
printed numerical values)b
- Can output YAML spec from `spack spec` with `-y`
- Can control depth of DAG traversal with --cover=[nodes|edges|paths]
- Can print install status (installed, missing, not installed) with -I
* Don't use YAML aliases in specs.
- Force Spack's YAML dumper to ignore aliases.
- aliases cause non-canonical YAML to be used in DAG hash, and result in
redundant hashes.
- add a test to ensure this behavior stays
* spack install: forward sys.stdin to child processes fixes#2140
- [ ] redirection process is spawned in __enter__ instead of __init__
- [ ] sys.stdin is forwarded to child processes
* log: wrapped __init__ definition
1) list gfortran as a fc and f77 compiler that can work with clang
2) allow compatible gfortran to ./spack compiler find with clang by matching version numbers
This is based on the discussions in
https://github.com/LLNL/spack/issues/237https://github.com/dealii/dealii/wiki/deal.II-in-Spack#mixing-gcc-and-clang-on-osx
This is not a long term solution but something to get us through the next months until the compiler
infrastructure is reworked to allow mixing and matching for C/C++ and Fortran compilers
Funded-by: IDEAS
Project: IDEAS/xSDK
Time: 1.5 hours
- Detailed debug information is now handed back to the parent process
from builds, for *any* type of exception.
- previously this only worked for Spack ProcessErrors, but now it works
for any type of error raised in a child.
- Spack will print an error message and source code context for build
errors by default.
- It will print a stack trace when using `spack -d`, even when the error
occurred in the child process.
- Ported old run-flake8-tests qa script to `spack flake8` command.
- New command does not modify files in the source tree
- Copies files to a temp stage modifies them there, and runs tests.
- Updated docs and `run-flake8-tests` script to call `spack flake8`.
- generalized and fixed to work with any key in YAML file
- simplified schema writing, as well
- add more unit tests for the config system
- Rename test/yaml.py to test/spack_yaml.py
- Add test/yaml.pyc to ignored pyc files.
- Added a schema for config.yaml
- Moved install tree configuration to config.yaml
- Moved etc/spack/install.yaml to etc/spack/defaults/config.yaml
- renamed install_area to "store", to use a term in common with guix/nix.
- in `config.yaml` file, it's called the `install_tree` to be more
intuitive to users.
- `install_tree` might've worked in the code, but `install_tree` is
already a global function in the spack namespace, from
llnl.util.filesystem.
Merge #2030 added a cyclic dependency between the Cray platform needing
to read a `targets.yaml` config file and `config.py` needing to get the
platform names.
This commit removes the cyclic dependency in favor of the more general
config scheme. It also removes the now functionless `targets.yaml`
config file. This breaks 'frontend' targets on the Cray platform but
all architecture targets, including the frontend, that are provided by
CrayPE are added to the Platform anyway so users can be explicit about
the architecture targeted by the Cray compiler wrappers:
```
spack spec libelf arch=cray-CNL-frontend
```
becomes
```
spack spec libelf arch=cray-CNL-mc8 # on an XK7 or
spack spec libelf arch=cray-CNL-sandybridge # on an older XC30, etc..
```
The only way the 'frontend' target can be defined after this commit is
through target environment variables.
* module file support: major rework of docs
* module file support: fixed issues found by @adamjstewart
- list or enumeration should not be indented
- use console instead of bash or csh in things that are not scripts
- other typos
* module file support: fixed other issues found by @adamjstewart
- tables should not be indented
- substitute lines with pyobject to import an entire function
- get help output running commands
- typos
* module file support: fixes according to review comments
- @citibeth moved `spack module loads` after `spack load`
- @glennpj tried to clarify installation table + changes to language
- @tgamblin Removed top level section and moved the whole thing into the reference manual
* module file support: moved directive before spack module loads
External packages do not have an spec.yaml file so don't check for it.
Without this change any time a package depends on an external package
when the new package is installed you will get the error
Install prefix exists but contains no spec.yaml
This problem has also haunted me since I started using Spack since PETSc
depends on Python and I used an external python but fortunately it
was relatively easy to debug once I could reproduce it at will.
Funded-by: IDEAS
Project: IDEAS/xSDK
Time: 1 hour
This replaces a custom token-based substitution format with calls to
Spec.format in modules.py
This also resolves a couple issues:
- LmodModules set configuration globally instead of in its initializer
which meant test-specific configuration was not applied
- Added support for setting hash_length=0 for LmodModules. This only
affects the module filename and not the directory names for the
hierarchy tokens in the path. This includes an additional unit test.
* add filter_system_paths()
* filter system paths in set_build_environment_variables()
* two function: lib/inc + bin
* reverse order in bin
* fix order
* minor
* improvements of the code
* more cleanup
* alternative solution for filter_bins
* fiddle base alalazo's approach
* minor
* minor
* Fixed a bug causing config-specified compiler flags to be ignored.
Updated the compiler config so all flags are in a separate section.
* Updated the documentation for the `compilers.yaml` file spec.
* Implemented basic testing for the 'flags' section of compiler config.
* Fixed a few minor problems with the manual compiler config documentation.
* Add new version property to handle joined version numbers
* Add unit test for new joined property
* Add documentation on version.up_to() and version.joined
* Removes the extra argument from Package.do_install while maintaining the changes in behavior pulled in #1603
* install : removed -i and -d shorthands (breaks backward compatibility)
* Change ':' to ','
* build_environment: allow compilers to set up an environment
* clang: mock up a toolchain directory for xcode
Some projects ignore CC and CXX flags and instead use xcode to find the
toolchain. Clang on Apple should set up the environment properly.
Arguably, every compiler could do this on Apple, but let's see how this
works out just for AppleClang for now.
The Documentation directory is ~1.7G and the excluded platforms add up
to about 7G. Ignoring swift saves another 500M. The resulting Xcode.app
copy is in the 2G range.
* compiler: set member variables early
This is required so that later methods can query things such as the
version of the compiler.
* compiler: support finding the real path of the compiler
On Apple, the /usr/bin compilers are actually wrapping tools themselves
which query xcrun for the currently selected Xcode installation. Pierce
this veil and get the real, full path the to underlying compilers
instead.
* icu4c: install with rpath
On macOS, icu installs with a library ID of the library name. Enabling
rpath makes its ID its full installed path which lets Qt5 link against
it successfully.
* qt: no -no-gtkstyle flag on Qt5 on macOS
* Rebase and merging using platform.system
Rebasing and merging using platform.system instead of uname -a.
* Add missing import platform statement
* Remove subprocess import
Remove ununsed import subprocess to make changes flak8 compliant
- Locks now use fcntl range locks on a single file.
How it works for prefixes:
- Each lock is a byte range lock on the nth byte of a file.
- The lock file is ``spack.installed_db.prefix_lock`` -- the DB tells us
what to call it and it lives alongside the install DB. n is the
sys.maxsize-bit prefix of the DAG hash.
For stages, we take the sha1 of the stage name and use that to select a
byte to lock.
With 100 concurrent builds, the likelihood of a false lock collision is
~5.36e-16, so this scheme should retain more than sufficient paralellism
(with no chance of false negatives), and get us reader-writer lock
semantics with a single file, so no need to clean up lots of lock files.
- Closing and re-opening to upgrade to write will lose all existing read
locks on this process.
- If we didn't allow ranges, sleeping until no reads would work.
- With ranges, we may never be able to take some legal write locks
without invalidating all reads. e.g., if a write lock has distinct
range from all reads, it should just work, but we'd have to close the
file, reopen, and re-take reads.
- It's easier to just check whether the file is writable in the first
place and open for writing from the start.
- Lock now only opens files read-only if we *can't* write them.
A use case where the previous approach was failing is :
- more than one spack process running on compute nodes
- stage directory is a link to fast LOCAL storage
In this case the processes may try to unlink something that is "dead" for them, but actually used by other processes on storage they cannot see.
* This fixes a bug in concretization. Before the recent change to the
algorithm, the intent was that the @develop version, although
"greater" than numberic versions, is never preferred BY DEFAULT over
numeric versions.
To test this... suppose you have a package with no `preferred=True` in
it, and nothing in `packages.yaml`, but with a `develop` version. For
the sake of this example, I've hacked my `python/package.py` to work
this way.
Without bugfix (WRONG: user should never get develop by default):
```
python@develop%clang@7.3.0-apple~tk~ucs4 arch=darwin-elcapitan-x86_64
...
```
With bugfix (RIGHT: largest numeric version selected):
```
python@3.5.2%clang@7.3.0-apple~tk~ucs4 arch=darwin-elcapitan-x86_64
...
```
* Documented version selection in concretization algo.
* Fix typos
* flake8
* Fix various documentation bugs
* Keep long option names, but don't include in Command Index
* Use long option name
* Explicitly designate sections to be listed in the Command Index
* Consistent menu bar titles
Input/output/error streams not directed to None or 'str' were not being closed
because `close()` method was being called on the argument value (a string type)
instead of the open file descriptor object.
* Fix bug in handling of precedence of preferred=True vs. versions given in packages.yaml (#1556)
* Standardized comparison of versions: numeric versions are always greater than non-numeric versions; and non-numeric versions are sorted alphabetically.
This is
a) simple
b) ensures that non-numeric versions (such as 'develop') in package.py are not chosen ahead of numeric versions, when nothing is specified in packages.yaml
Fixes Issue #1557
* Removed debugging output
* Fix variable shadowing bug
* Ensure develop < numeric version.
* Bug fix.
* Passes all unit tests in versions.py
* flake8 fixes
* flake8 fixes
* Changed type test to be more correct.
See http://stackoverflow.com/questions/8203336/difference-between-int-and-numbers-integral-in-python
This closes#1757 which provides an example of a url scheme where the
version appears after the extension. Instead of extending the parsing
logic to handle this case, this commit allows the user to specify
their extension type. This helps Spack choose the appropriate
decompressor and mirror archive filename.
* Transferred pending changes from efischer/develop
* 1. Rewrite of "Getting Started": everything you need to set up Spack, even on old/ornery systems. This is not a reference manual section; items covered here are covered more systematically elsewhere in the manual. Some sections were moved here from elsewhere.
2. Beginning to write three methods of application developer support. Two methods were moved from elsewhere.
* Edits...
* Moved sections in preparation for additional text to be added from old efischer/docs branch.
* Moved 2 more sections.
* Avoid accid
* Applied proofreading edits from @adamjstewart
* Fixed non-standard section characters.
* Moved section on profiling to the developer's guide.
* Still working on Spack workflows...
* Finished draft of packaging_guide.rst
* Renamed sample projects.
* Updates to docstrings
* Added documentation to resolve#638 (content taken from #846)
* Added section on resolving inconsistent run dependencies. Addresses #645
* Showed how to build Python extensions only compatible with certain versions of Python.
* Added examples of getting the right behavior from depends_on(). See #1035
* Added section on Intel compilers and their GCC masquerading feature. Addresses #638, #1687.
* Fixed formatting
* Added fixes to filesystem views. Added a caveats section to ``spack setup``.
* Updated section on Intel compiler configuration because compiler flags currently do not work (see #1687)
* Defined trusted downloads, and updated text based on them. (See #1696)
* Added workflow to deal with buggy upstream software. See #1683
* Added proper separation between Spack Docs vs. Reference Manual
* Renamed spack_workflows to workflows. Resolves a conflict with the .gitignore file.
* Removed repeated section.
* Created new "Vendor Specific Compiler Configuration" section and organized existing Intel section into it. Added new PGI and NAG sections; but they need to be expanded / rewritten based on the existing text plus research through Spack issues on GitHub.
* Fixed text on `spack load --dependencies` to conform to reality. See #1662
* Added patching as option for upstream bugfixes.
* Added section on using licensed compilers.
* Added section on non-downloadable tarballs.
* Wrote sections on NAG and PGI. Arranged compilers in alphabetical order.
* Fix indent.
* Fixed typos.
* Clarified dependency types.
* Applied edits from Adam J. Stewart. Spellchecked workflows and getting_started.
* Removed spurious header
* Fixed Sphinx errors
* Fixed erroneous symbol in docstring.
* Fix many typos and formatting problems.
* Spacing changes
* Added section on fixing Git problems. See #1779
* Fixed signature of install() method.
* Addressed system packages in greater detail. See #1794#1795
* Fixed typos
* Fixed quotes
* Duplicate section on Spack profiling removed from configuration.rst. It had earlier been moved to developer_guide.rst, where it fits better.
* Minor edits
- Tweak supported platform language.
- Various small changes to the new getting started guide.
* Fixed bug with quotes.
- Fixed up dependency management so that:
- build deps go in PATH and -I
- link deps go in -L args
- only *immediate* link deps are RPATH'd
The latter reduces the number of libraries that need to be added to
DT_NEEDED / LC_RPATH. This removes redundant RPATHs to transitive
dependencies.
* Fixes#1720: spack reindex fails with invalid ref count.
- Database graph wasn't being built properly; dependencies were set up
incorrectly in the nodes that ended up in the graph on reindex.
- Reworked _add to increment ref count properly and to always build
bottom-up to make the logic simpler to understand.
* Add checks to ensure DB is a valid merkle tree.
- Distinguish between static (package) and dynamic (spec) graphs.
- static graphs ignore conditions and multiple instances (hashes) and
plot raw dependencies among packages.
- dynamic graphs include information from particular specs (instances of
packages) and can have multiple instances with hashes.
- Allow graphing all packages in the install DB.
- useful for debugging.
* Perform shebang fix for all files
* Fix sbang for perl scripts
Otherwise perl would look at the #! line and call sbang again, resulting
in an infinite loop.
* Turned <provider>_libs into an iterable
Modifications :
- added class LibraryList + unit tests
- added convenience functions `find_libraries` and `dedupe`
- modifed non Intel blas/lapack providers
- modified packages using blas_shared_libs and similar functions
* atlas : added pthread variant
* intel packages : added lapack_libs and blas_libs
* find_library_path : removed unused function
* PR review : fixed last issues
* LibraryList : added test on __add__ return type
* LibraryList : added __radd__ fixed unit tests
fix : failing unit tests due to missing `self`
* cp2k and dependecies : fixed blas-lapack related statements in package.py
* Fixed bug propagating --dirty flag to sub-installs.
* Fix syntax error
* Allow --dirty flag to be set with SPACK_DIRTY env var.
* Added dirty flag to `spack diy` and `spack setup`, as is currently in `spack install`
* flake8
Includes :
- treatment of a generic hierarchy (i.e. lapack + mpi + compiler)
- possibility to specify which compilers are to be considered Core
- correct treatment of the 'family' directive
- unit tests for most new features
When re-using previously downloaded tarballs, spack copies from
`var/spack/stage/PACKAGE-VERSION-HASH/downloaded_file` to
`var/spack/cache/PACKAGE/downloaded_file`. This fails if the source is owned by
a different user (`shutil.copy` tries to retain all meta data including file
ownership). Change to a non-meta-data copy function (`shutil.copyfile`).
This closes#1308, where fetching a non-expanded resource from a mirror
will cause an error.
This also ensures that when a URL resource is fetched from a mirror,
that it will be named as though it were retrieved from the original
URL. This is particularly useful for non-expanded resources since it
ensures that the resource name is consistent for the installation
(this is less important for expanded resources because the build takes
place inside the expanded resource).
- Spec._dup() incorrectly copied cached hashes and normal/concrete values
even when dependency structure was not preserved.
- Now these are only copied when *all* dependencies are copied.
- Currently, build dependencies are not currently hashed; we are waiting
to hash these until we have smarter concretization that can reuse more
installed specs. The layout needs to account for this when checking
whethert things are installed.
- Transaction logic had gotten complicated -- DB would not reindex when
corrupt, rather the error would be reported (ugh).
- DB will now print the error and force a rebuild when errors are
detected reading the old databse.
- Spack currently not hashing build deps (to allow more reuse of packages
and less frequent re-installing)
- Fast in-memory hash should still hash *all* deptypes, and installed
specs will only reflect link and run deps.
- We'll revert this when we can concretize more liberally based on what
is already installed.
- can now pass these to Spec.copy() and Spec._dup():
- deps=True
- deps=False
- deps=(list of deptypes)
- Makes it easy to filter out only part of a spec.
Everything in the __all__ list in the spack module is from some other
module, so only do their documentation in their original location. This
also avoids issues like the fact that some directive names shadow spack
core module names.
The header append lines were too long, so I just converted it into a
multi-line string template so it's all one piece now instead of a bunch
of appends.
Major stuff:
- Created a FileCache for managing user cache files in Spack. Currently just
handles virtuals.
- Moved virtual cache from the repository to the home directory so that users do
not need write access to Spack repositories to use them.
- Refactored `Transaction` class in `database.py` -- moved it to
`LockTransaction` in `lock.py` and made it reusable by other classes.
Other additions:
- Added tests for file cache and transactions.
- Added a few more tests for database
- Fixed bug in DB where writes could happen even if exceptions were raised
during a transaction.
- `spack uninstall` now attempts to repair the database when it discovers that a
prefix doesn't exist but a DB record does.
- Spack will check if the index needs updating, and will only parse
all package files if it does.
- Spack tries to parse as few package files as necessary.
- Don't need to list all packages unless we have to.
- Only use the list of all packages for existence checks if we have
generated it for some other purpose.
This PR will catch the error where the url can not be determined from a
VCS URL, such as git. It will print a message to the console and move on
because it should not be a fatal error at this point in the process.
This should fix#1459.
The archive_version variable should only get set if versions will be
checked and that is only if there is a list_url in the package file. For
VCS repos setting the variable triggers an error from web.py as it
parses the default_fetcher object.
This should fix#1422.
Assuming a bash interactive environment will be correctly formed on login, we
should prefer to probe the environment using a shell that reports itself as
`bash` instead of `sh` which may not source files that set the
environment modules in statements like:
```
case "$is" in
bash) test -s /etc/bash.bashrc.local && . /etc/bash.bashrc.local ;;
ksh) test -s /etc/ksh.kshrc.local && . /etc/ksh.kshrc.local ;;
zsh) test -s /etc/zsh.zshrc.local && . /etc/zsh.zshrc.local ;;
ash) test -s /etc/ash.ashrc.local && . /etc/ash.ashrc.local
esac
test -s /etc/sh.shrc.local && . /etc/sh.shrc.local
```
The list of default environment modules is obtained by calling
`module list -lt`
from a subshell with a wiped environment. This allows `/etc/profile` and other
init scripts to be fully sourced which should generally include loading the
default modules.
The list of default modules is then parsed for the first acceptable CPU target,
assumed to be the back_end target.
A platform to generically cover all Cray systems is introduced to avoid having
specific platforms for each of XK (XE, XT), XC, and future systems using CrayPE
and CNL.
The platform searches for 'front_end' and 'back_end' targets, in order, from:
* Environment variables 'SPACK_FRONT_END' and 'SPACK_BACK_END'
* A spack configuration file 'targets.yaml'
* Parsing `/etc/bash.bashrc.local` for first loaded CrayPE CPU target.
If a back_end target is not found through one of these methods, an exception is
raised. Otherwise, the back_end is set as the default target. The shell init
script search is based on recommendations in Crayports case #144359.
No automagic way of determining front_end targets has been found (to date) so if
a front_end is not specified through configuration, it is ignored which should
leave a spack instance in a consistant state.
