Without --allow-root spack cannot push binaries that contain paths in
binaries. This flag is almost always needed, so there is no point of
requiring users to spell it out.
Even without --allow-root, rpaths would still have to be patched, so the
flag is not there to guarantee binaries are not modified on install.
This commit makes --allow-root the default, and drops the code
required for it. It also deprecates `spack buildcache preview`, since
the command made sense only with --allow-root.
As a side effect, Spack no longer depends on binutils for relocation
Add support for conflict directives in Lua modulefile like done for Tcl
modulefile.
Note that conflicts are correctly honored on Lmod and Environment
Modules <4.2 only if mutually expressed on both modulefiles that
conflict with each other.
Migrate conflict code from Tcl-specific classes to the common part. Add
tests for Lmod and split the conflict test case in two.
Co-authored-by: Massimiliano Culpo <massimiliano.culpo@gmail.com>
* When using system tools to unpack a .gz file, the input file needs a
different name than the output file. Normally, we generate this new
name by stripping off the .gz extension off of the file name.
This was not sufficient if the file name did not have an extension,
so we temporarily rename the file in that case.
* When using system tar utility to untar on Windows, we were (erroneously)
skipping the actual untar step if the filename was lacking a .tar
extension
* For foo.txz, we were not changing the extension of the decompressed file
(i.e. we would decompress foo.txz to foo.txz). This did not cause any
problems, but is confusing, so has been updated such that the output
filename reflects its decompressed state (i.e. foo.tar).
* Added test for strip_compression_extension
* Update test_native_unpacking to test each archive type with and without
an extension as part of the file name (i.e. we test "foo.tar.gz", but
also make sure we decompress properly if it is named "foo").
Running `spack test run <python package>` resulted in the error
```
'str' object is not callable
```
because the python executable was not set correctly.
Lock objects can now be instantiated independently,
without being tied to the global configuration. The
same is true for database and store objects.
The database __init__ method has been simplified to
take a single lock configuration object. Some common
lock configurations (e.g. NO_LOCK or NO_TIMEOUT) have
been named and are provided as globals.
The use_store context manager keeps the configuration
consistent by pushing and popping an internal scope.
It can also be tuned by passing extra data to set up
e.g. upstreams or anything else that might be related
to the store.
* Bugfix: spack.yaml concretizer:unify needs to be read and used
* Optional: add environment test to ensure configuration scheme is used
* Activate environment in unit tests
A more proper solution would be to keep
an environment instance configuration as
an attribute, but that is a bigger refactor
* Delay evaluation of Environment.unify
* Slightly simplify unit tests
---------
Co-authored-by: Massimiliano Culpo <massimiliano.culpo@gmail.com>
Allow the following formats:
```yaml
mirrors:
name: <url>
```
```yaml
mirrors:
name:
url: s3://xyz
access_pair: [x, y]
```
```yaml
mirrors:
name:
fetch: http://xyz
push:
url: s3://xyz
access_pair: [x, y]
```
And reserve two new properties to indicate the mirror type (e.g.
mirror.spack.io is a source mirror, not a binary cache)
```yaml
mirrors:
spack-public:
source: true
binary: false
url: https://mirror.spack.io
```
A few packages have version directives evaluated
within if statements, conditional on the value of
`platform.platform()`.
Sometimes there are no cases for e.g. platform=darwin and that
causes a lot of spurious failures with version existence
audits.
This PR allows expressing conditions to skip version
existence checks in audits and avoid these spurious reports.
### Rationale
While working on #29549, I noticed a lot of inconsistencies in our argparse help messages. This is important for fish where these help messages end up as descriptions in the tab completion menu. See https://github.com/spack/spack/pull/29549#issuecomment-1627596477 for some examples of longer or more stylized help messages.
### Implementation
This PR makes the following changes:
- [x] help messages start with a lowercase letter.
- [x] Help messages do not end with a period
- [x] the first line of a help message is short and simple
longer text is separated by an empty line
- [x] "help messages do not use triple quotes"
"""(except docstrings)"""
- [x] Parentheses not needed for string concatenation inside function call
- [x] Remove "..." "..." string concatenation leftover from black reformatting
- [x] Remove Sphinx argument docs from help messages
The first 2 choices aren't very controversial, and are designed to match the syntax of the `--help` flag automatically added by argparse. The 3rd choice is more up for debate, and is designed to match our package/module docstrings. The 4th choice is designed to avoid excessive newline characters and indentation. We may actually want to go even further and disallow docstrings altogether.
### Alternatives
Choice 3 in particular has a lot of alternatives. My goal is solely to ensure that fish tab completion looks reasonable. Alternatives include:
1. Get rid of long help messages, only allow short simple messages
2. Move longer help messages to epilog
3. Separate by 2 newline characters instead of 1
4. Separate by period instead of newline. First sentence goes into tab completion description
The number of commands with long help text is actually rather small, and is mostly relegated to `spack ci` and `spack buildcache`. So 1 isn't actually as ridiculous as it sounds.
Let me know if there are any other standardizations or alternatives you would like to suggest.
Refactor `TermTitle` into `InstallStatus` and use it to show progress
information both in the terminal title as well as inline. This also
turns on the terminal title status by default.
The inline output will look like the following after this change:
```
==> Installing m4-1.4.19-w2fxrpuz64zdq63woprqfxxzc3tzu7p3 [4/4]
```
People frequently ask us how to pipe `spack find` output to other commands, and we tell
them to do things like this:
```console
$ spack find --format "/{hash}" | spack uninstall -ay
```
Sometimes users don't know about hash references and come up with potentially ambiguous
formulations like this:
```console
spack find --format {name}@{version}%{compiler} | spack uninstall -ay
```
Since this is a common enough thing to want to do, and to make it more obvious how, this
PR adds a `-H` / `--hashes` as a shortcut, so you can now just do:
```console
spack find -H | spack uninstall -ay
```
`"%s" % spec` formats the spec with deps included, which produces sometimes KBs
of data and is slow to run in pure Python. It can delay otherwise very short-lived
read/write locks on the database.
Discovered in #38762 where profile output showed about 2 seconds is spent in
`spec.format`, which is significant overhead when using multiprocessing to install
from binary cache in parallel (installation often takes <5s for small packages). With
this change, `spec.format` no longer shows up in profile output.
(This line hasn't changed since Spack v0.9 ;p)
* move format() call to custom NoSuchSpecError exception
* add a comment saying why, so we can eventually change `Spec.__str__`
1. Fix O(n^2) iteration in `_get_overwrite_specs`
2. Early exit `get_by_hash` on full hash
3. Fix O(n^2) double lookup in `all_matching_specs` with hashes
4. Fix some legibility issues
* When installing a package Spack will attempt to set group permissions on
the install prefix even when the configuration does not specify a group.
Co-authored-by: David Gomez <dvdgomez@users.noreply.github.com>
Move the logic checking which mirrors have the specs we need closer
to where that information is needed. Also update the staging summary
to contain a brief description of why we scheduled or pruned each
job. If a spec was found on any mirrors, regardless of whether
we scheduled a job for it, print those mirrors.
PowerShell requires explicit shell and env support in Spack.
This is due to the distinct differences in shell interactions between
cmd and pwsh. Add a doskey in pwsh piping 'spack' commands to a
powershell script similar to the sh function 'spack'. Add
support for PowerShell-specific shell interactions from Spack
(set/unset shell variables).
* Support hardlinks/junctions on Windows systems without developer
mode enabled
* Generally, use of llnl.util.symlink.symlink is preferred over
os.symlink since it handles this automatically
* Generally an error is now reported if a user attempts to create a
symlink to a file that does not exist (this was previously allowed
on Linux/Mac).
* One exception to this: when Spack installs files from the source
into their final prefix, dangling symlinks are allowed (on
Linux/Mac - Windows does not allow this in any circumstance).
The intent behind this is to avoid generating failures for
installations on Linux/Mac that were succeeding before.
* Because Windows is strict about forbidding dangling symlinks,
`traverse_tree` has been updated to skip creating symlinks if they
would point to a file that is ignored. This check is not
transitive (i.e., a symlink to a symlink to an ignored file would
not be caught appropriately)
* Relocate function: resolve_link_target_relative_to_the_link
(this is not otherwise modified)
Co-authored-by: jamessmillie <smillie@txcorp.com>
Update list of excluded variables in `from_sourcing_file` function to
cover all variables specific to Environment Modules or Lmod. Add
specifically variables relative to the definition of `module()`, `ml()`
and `_module_raw()` Bash functions.
Fixes#13504
Update `env.set` command and underlying `SetEnv` object to add the `raw`
boolean attribute. `raw` is optional and set to False by default. When
set to True, value format is skipped for object when generating
environment modifications.
With this change it is now possible to define environment variable
whose value contains variable reference syntax (like `{foo}` or `{}`)
that should be set as-is.
Fixes#29578
Spack flags supplied by users should supersede flags from package build systems and
other places in Spack. However, Spack currently adds user-supplied flags to the
beginning of the compile line, which means that in some cases build system flags will
supersede user-supplied ones.
The right place to add a flag to ensure it has highest precedence for the compiler really
depends on the type of flag. For example, search paths like `-L` and `-I` are examined
in order, so adding them first is highest precedence. Compilers take the *last* occurrence
of optimization flags like `-O2`, so those should be placed *after* other such flags. Shim
libraries with `-l` should go *before* other libraries on the command line, so we want
user-supplied libs to go first, etc.
`lib/spack/env/cc` already knows how to split arguments into categories like `libs_list`,
`rpath_dirs_list`, etc., so we can leverage that functionality to merge user flags into
the arg list correctly.
The general rules for injected flags are:
1. All `-L`, `-I`, `-isystem`, `-l`, and `*-rpath` flags from `spack_flags_*` to appear
before their regular counterparts.
2. All other flags ordered with the ones from flags after their regular counterparts,
i.e. `other_flags` before `spack_flags_other_flags`
- [x] Generalize argument categorization into its own function in the `cc` shell script
- [x] Apply the same splitting logic to injected flags and flags from the original compile line.
- [x] Use the resulting flag lists to merge user- and build-system-supplied flags by category.
- [x] Add tests.
Signed-off-by: Andrey Parfenov <andrey.parfenov@intel.com>
Co-authored-by: iermolae <igor.ermolaev@intel.com>
The `unparser` that Spack uses for package hashing had several tweaks to ensure compatibility
with Python 2.7:
1. Currently, the unparser automatically moves `*` and `**` args to the end to preserve
compatibility with `python@:3.4`
2. `print a, b, c` statements and single-tuple `print((a, b, c))` function calls were
remapped to `print(a, b, c)` in the unparsed output for consistency across versions.
(1) is causing issues in our tests because a recent patch to the Python source code
(https://github.com/python/cpython/pull/102953/files#diff-7972dffec6674d5f09410c71766ac6caacb95b9bccbf032061806ae304519c9bR813-R823)
has a `**` arg before an named argument, and we round-trip the core python source code
as a test of our unparser. This isn't actually a break with our consistent unpausing -- it's still
consistent, the python source just doesn't unparse to the same thing anymore. It does makes
it harder to test, so it's not worth maintaining the Python2-specific stuff anymore.
Since we only support `python@3.6:`, this PR removes (1) and (2) from the unparser, but keeps
one last tweak for unicode AST inconsistencies, as it's still needed for Python 3.5-3.7.
This fixes the CI error we've been seeing on `python@3.11.4` and `python@3.10.12`. Again, that
bug exists only in the test system and doesn't affect our canonical hashing of Python code.
* DependencySpec: add virtuals attribute on edges
This works for both the new and the old concretizer. Also,
added type hints to involved functions.
* Improve virtual reconstruction from old format
* Reconstruct virtuals when reading from Cray manifest
* Reconstruct virtual information on test dependencies
Update Tcl modulefile template to use the `depends-on` command to
autoload modules if Lmod is the current module tool.
Autoloading modules with `module load` command in Tcl modulefile does
not work well for Lmod at some extend. An attempt to unload then load
designated module is performed each time such command is encountered. It
may lead to a load storm that may not end correctly with large number of
module dependencies.
`depends-on` command should be used for Lmod instead of `module load`,
as it checks if module is already loaded, and does not attempt to reload
this module.
Lua modulefile template already uses `depends_on` command to autoload
dependencies. Thus it is already considered that to use Lmod with Spack,
it must support `depends_on` command (version 7.6+).
Environment Modules copes well with `module load` command to autoload
dependencies (version 3.2+). `depends-on` command is supported starting
version 5.1 (as an alias of `prereq-all` command) which was relased last
year.
This change introduces a test to determine if current module tool that
evaluates modulefile is Lmod. If so, autoload dependencies are defined
with `depends-on` command. Otherwise `module load` command is used.
Test is based on `LMOD_VERSION_MAJOR` environment variable, which is set
by Lmod starting version 5.1.
Fixes#36764
When interpreting local paths as relative URL endpoints, they were
formatted as Windows paths on Windows (i.e. with '\'). URLs should
always be POSIX-style.
Update modulefile templates to append a trailing delimiter to MANPATH
environment variable, if the modulefile sets it.
With a trailing delimiter at ends of MANPATH's value, man will search
the system man pages after searching the specific paths set.
Using append-path/append_path to add this element, the module tool
ensures it is appended only once. When modulefile is unloaded, the
number of append attempt is decreased, thus the trailing delimiter is
removed only if this number equals 0.
Disclaimer: no path element should be appended to MANPATH by generated
modulefiles. It should always be prepended to ensure this variable's
value ends with the trailing delimiter.
Fixes#11355.
* Improve lib/spack/spack/test/cmd/compiler.py
* Use "tmp_path" in the "mock_executable" fixture
* Return a pathlib.Path from mock_executable
* Fix mock_executable fixture on Windows
"mock_gcc" was very similar to mock_executable, so use the latter to reduce code duplication
* Remove wrong compiler cache, fix compiler removal
fixes#37996
_CACHE_CONFIG_FILES was both unneeded and wrong, if called
subsequently with different scopes.
Here we remove that cache, and we fix an issue with compiler
removal triggered by having the same compiler spec in multiple
scopes.
* e4s cray ci stack
* e4s ci: add cray
* add zen4 tag
* WIP: new defintions just for cray
* updates
* remove ci signing job overrride, not necessary
* echo $PATH and show modules loaded
* add mirror
* add external def for cray-libsci
* comment out quantum-espresso
* use /etc/protected-runner as key path
* cray ci stack: do not remove tags: [spack, public]
* make cray stack composable
* generate job should run on public tagged runner, override default config:install_tree:root
* CI: Use relative path in default script
* CI: Use relative includes paths for shell runners
* Use concrete_env_dir for relpath
* ml-darwin-aarch64-mps: jax has bazel codesign issue
---------
Co-authored-by: Scott Wittenburg <scott.wittenburg@kitware.com>
Co-authored-by: Ryan Krattiger <ryan.krattiger@kitware.com>
#37592 updated cached cmake packages to set CMAKE_CUDA_ARCHITECTURES.
The condition `if archs != "none"` lead to `CMAKE_CUDA_ARCHITECTURES=none`
when cuda_arch=none (incorrect check on the value of a multi-valued
variant), i.e. CMAKE_CUDA_ARCHITECTURES is always set. This PR udpates
the condition to if archs[0] != "none" to ensure CMAKE_CUDA_ARCHITECTURES
is only set if cuda_arch is not none (which seems to be the pattern used
in other packages).
This does the same for HIP (although in general ROCmPackage disallows
amdgpu_target=none when +rocm).
* Add CMake options for building with CUDA/HIP support to
CachedCMakePackages (intended to reduce duplication across packages
building with +hip/+cuda and using CachedCMakePackage)
* Define generic variables like CMAKE_PREFIX_PATH for
CachedCMakePackages (so that a user may invoke "cmake" themselves
without needing to setthem on the command line).
* Make `lbann` a CachedCMakePackage.
Co-authored-by: Chris White <white238@llnl.gov>
fa7719a changed syntax for specifying exact versions, which are
required for some compiler specs (including those read as part
of parsing a Cray manifest). This fixes that and also makes a
couple other improvements to manifest parsing.
* Instantiate compiler specs with exact versions (fixes#37893)
* fix slingshot network detection (CPE 22.10+ has libcxi.so
in /usr/lib64)
* "spack external find": add arg to ignore default dir for cray
manifests
Change default naming scheme for tcl modules for a more user-friendly
experience.
Change from flat projection to "per software name" projection.
Flat naming scheme restrains module selection capabilities. The
`{name}/{version}...` scheme make possible to use user-friendly
mechanisms:
* implicit defaults (`module load git`)
* extended default (`module load git/2`)
* advanced version specifiers (`module load git@2:`)
Note the win-sdk package is not installable and reports an error
which instructs the user how to add it. Without this fix, a
(more confusing) error occurs before this message can be generated.
"spack build-env" was not generating proper environment variable
definitions on Windows; this commit updates the generated commands
to succeed with batch/PowerShell.
Ensure that spack compiler add/find/list and lists of concrete specs
print the compiler effectively as {compiler.name}{@compiler.version}.
Co-authored-by: Harmen Stoppels <harmenstoppels@gmail.com>
Make it clear that copy-only pipelines are not supported while still
using the deprecated ci config format. Also ensure that the deprecated
stack does not fail on spack pipelines for tags.
* Fix reporting of packageless specs as having no tests
* Add test_test_output_multiple_specs with update to simple-standalone-test (and tests)
* Refactored test status summary; added more tests or checks
MSVC compiler logic was using string parsing to extract version
from compiler spec, which was fragile. This broke in #37572, so has
been fixed and made more robust by using attribute access.
Ensure that requirements `packages:*:require:@x` and preferences `packages:*:version:[x]`
fail concretization when no version defined in the package satisfies `x`. This always holds
except for git versions -- they are defined on the fly.
Two bugs came in from #37438
1. `unify: when_possible` was broken, because of an incorrect assertion. abstract/concrete
spec pairs were compared against the results that were in the process of being computed,
rather than against the previous results.
2. `unify: true` had an ordering bug that could mix the association between abstract and
concrete specs
- [x] 1 is resolved by creating a lookup from old concrete specs to old abstract specs,
and we use that to associate the "new" concrete specs that happen to be the old
ones with their abstract specs (since those are stripped out for concretization
- [x] 2 is resolved by combining the new and old abstract as lists instead of combining
them as sets. This is important because `set() | set()` does not make any ordering
promises, even though set ordering is otherwise guaranteed in `python@3.7:`
Spack displays package code context when it shouldn't (e.g., on `FetchError`s)
and doesn't display it when it should (e.g., when errors occur in builder classes.
The line attribution can sometimes be off by one, as well.
- [x] Display package context when errors occur in a subclass of `PackageBase`
- [x] Display package context when errors occur in a subclass of `BaseBuilder`
- [x] Do not display package context when errors occur in `PackageBase`,
`BaseBuilder` or other core code that is not in a `package.py` file.
- [x] Fix off-by-one error for core code (don't subtract one from the line number *unless*
it's in an actual `package.py` file.
---------
Co-authored-by: Todd Gamblin <tgamblin@llnl.gov>
We currently throw a nasty error if you try to reuse packages from some other namespace
(e.g., OLCF), but we should be able to reuse patched local versions of builtin packages.
Right now the only obstacle to that is that we try to look up virtual info for unknown
namespaces, and we can't get the package from the repo to do that. We *can* assume that
a package with a known namespace is similar, and that its virtual provider information
is reasonably accurate, so we now do that. This isn't 100% accurate, but neither is
relying on the package itself, as it may have gone out of date.
The real solution here is virtual edge information, but this is a stopgap until we have
that.
`spec_clauses()` attempts to look up package information for concrete specs in order to
determine which virtuals they may provide. This fails for renamed/deleted dependencies
of buildcaches and installed packages.
This will eventually be fixed by #35258, which adds virtual information on edges, but we
need a workaround to make older buildcaches usable.
- [x] make an exception for renamed packages and omit their virtual constraints
- [x] add a note that this will be solved by adding virtuals to edges
The concretizer can fail with `reuse:true` if a buildcache or installation contains a
package with a dependency that has been renamed or deleted in the main repo (e.g.,
`netcdf` was refactored to `netcdf-c`, `netcdf-fortran`, etc., but there are still
binary packages with dependencies called `netcdf`).
We should still be able to install things for which we are missing `package.py` files.
`Spec.inject_patches_variant()` was failing this requirement by attempting to look up
the package class for concrete specs. This isn't needed -- we can skip it.
- [x] swap two conditions in `Spec.inject_patches_variant()`
The @= in `spack find` output adds a bit of noise. Remove it as we
did for `spack spec` and `spack concretize`.
This modifies display_specs so it actually covers other places we use that routine, as
well, e.g., `spack buildcache list`.
before:
```
-- linux-ubuntu20.04-aarch64 / gcc@=11.1.0 -----------------------
ofdlcpi libpressio@0.88.0
```
after:
```
-- linux-ubuntu20.04-aarch64 / gcc@11.1.0 -----------------------
ofdlcpi libpressio@0.88.0
```
If a user does not explicitly `--force` the concretization of an entire environment,
Spack will try to reuse the concrete specs that are already in the lockfile.
---------
Co-authored-by: becker33 <becker33@users.noreply.github.com>
Co-authored-by: Todd Gamblin <tgamblin@llnl.gov>
* gitlab ci: release fixes and improvements
- use rules to reduce boilerplate in .gitlab-ci.yml
- support copy-only pipeline jobs
- make pipelines for release branches rebuild everything
- make pipelines for protected tags copy-only
* gitlab ci: remove url changes used in testing
* gitlab ci: tag mirrors need public key
Make sure that mirrors associated with release branches and tags
contain the public key needed to verify the signed binaries. This
also ensures that when stack-specific mirror contents are copied
to the root, the root mirror has the public key as well.
* review: be more specific about tags, curl flags
* Make the check in ci.yaml consistent with the .gitlab-ci.yml
---------
Co-authored-by: Ryan Krattiger <ryan.krattiger@kitware.com>
Currently, specs on buildcache mirrors must be referenced by their full description. This PR allows buildcache specs to be referenced by their hashes, rather than their full description.
### How it works
Hash resolution has been moved from `SpecParser` into `Spec`, and now includes the ability to execute a `BinaryCacheQuery` after checking the local store, but before concluding that the hash doesn't exist.
### Side-effects of Proposed Changes
Failures will take longer when nonexistent hashes are parsed, as mirrors will now be scanned.
### Other Changes
- `BinaryCacheIndex.update` has been modified to fail appropriately only when mirrors have been configured.
- Tests of hash failures have been updated to use `mutable_empty_config` so they don't needlessly search mirrors.
- Documentation has been clarified for `BinaryCacheQuery`, and more documentation has been added to the hash resolution functions added to `Spec`.
This PR ensures that we'll get a comprehensible error message whenever an old
version of Spack tries to use a DB or a lockfile that is "too new".
* Fix error message when using a too new DB
* Add a unit-test to ensure we have a comprehensible error message
Add a section to the lock file to track the Spack version/commit that produced
an environment. This should (eventually) enhance reproducibility, though we
do not currently do anything with the information. It just adds to provenance
at the moment.
Changes include:
- [x] adding the version/commit to `spack.lock`
- [x] refactor `spack.main.get_version()
- [x] fix a couple of environment lock file-related typos
The flags --mirror-name / --mirror-url / --directory were deprecated in
favor of just passing a positional name, url or directory, and letting spack
figure it out.
---------
Co-authored-by: Scott Wittenburg <scott.wittenburg@kitware.com>
Prior to this PR, the HOMEDRIVE environment variable was used to
detect what drive we are operating in. This variable is not available
for service account logins (like what is used for CI), so switch to
extracting the drive from PROGRAMFILES (which is more-widely defined).
On Windows, several commonly available system tools for decompression
are unreliable (gz/bz2/xz). This commit refactors `decompressor_for`
to call out to a Windows or Unix-specific method:
* The decompressor_for_nix method behaves the same as before and
generally treats the Python/system support options for decompression
as interchangeable (although avoids using Python's built-in tar
support since that has had issues with permissions).
* The decompressor_for_win method can only use Python support for
gz/bz2/xz, although for a tar.gz it does use system support for
untar (after the decompression step). .zip uses the system tar
utility, and .Z depends on external support (i.e. that the user
has installed 7zip).
A naming scheme has been introduced for the various _decompression
methods:
* _system_gunzip means to use a system tool (and fail if it's not
available)
* _py_gunzip means to use Python's built-in support for decompressing
.gzip files (and fail if it's not available)
* _gunzip is a method that can do either
This is a refactor of Spack's stand-alone test process to be more spack- and pytest-like.
It is more spack-like in that test parts are no longer "hidden" in a package's run_test()
method and pytest-like in that any package method whose name starts test_
(i.e., a "test" method) is a test part. We also support the ability to embed test parts in a
test method when that makes sense.
Test methods are now implicit test parts. The docstring is the purpose for the test part.
The name of the method is the name of the test part. The working directory is the active
spec's test stage directory. You can embed test parts using the test_part context manager.
Functionality added by this commit:
* Adds support for multiple test_* stand-alone package test methods, each of which is
an implicit test_part for execution and reporting purposes;
* Deprecates package use of run_test();
* Exposes some functionality from run_test() as optional helper methods;
* Adds a SkipTest exception that can be used to flag stand-alone tests as being skipped;
* Updates the packaging guide section on stand-alone tests to provide more examples;
* Restores the ability to run tests "inherited" from provided virtual packages;
* Prints the test log path (like we currently do for build log paths);
* Times and reports the post-install process (since it can include post-install tests);
* Corrects context-related error message to distinguish test recipes from build recipes.
fixes#22341
Using double quotes creates issues with shell variable substitutions,
in particular when the manifest has "definitions:" in it. Use single
quotes instead.
Add a "require" directive to packages, which functions exactly like
requirements specified in packages.yaml (uses the same fact-generation
logic); update both to allow making the requirement conditional.
* Packages may now use "require" to add constraints. This can be useful
for something like "require(%gcc)" (where before we had to add a
conflict for every compiler except gcc).
* Requirements (in packages.yaml or in a "require" directive) can be
conditional on a spec, e.g. "require(%gcc, when=@1.0.0)" (version
1.0.0 can only build with gcc).
* Requirements may include a message which clarifies why they are needed.
The concretizer assigns a high priority to errors which generate these
messages (in particular over errors for unsatisfied requirements that
do not produce messages, but also over a number of more-generic
errors).
## Version types, parsing and printing
- The version classes have changed: `VersionBase` is removed, there is now a
`ConcreteVersion` base class. `StandardVersion` and `GitVersion` both inherit
from this.
- The public api (`Version`, `VersionRange`, `ver`) has changed a bit:
1. `Version` produces either `StandardVersion` or `GitVersion` instances.
2. `VersionRange` produces a `ClosedOpenRange`, but this shouldn't affect the user.
3. `ver` produces any of `VersionList`, `ClosedOpenRange`, `StandardVersion`
or `GitVersion`.
- No unexpected type promotion, so that the following is no longer an identity:
`Version(x) != VersionRange(x, x)`.
- `VersionList.concrete` now returns a version if it contains only a single element
subtyping `ConcreteVersion` (i.e. `StandardVersion(...)` or `GitVersion(...)`)
- In version lists, the parser turns `@x` into `VersionRange(x, x)` instead
of `Version(x)`.
- The above also means that `ver("x")` produces a range, whereas
`ver("=x")` produces a `StandardVersion`. The `=` is part of _VersionList_
syntax.
- `VersionList.__str__` now outputs `=x.y.z` for specific version entries,
and `x.y.z` as a short-hand for ranges `x.y.z:x.y.z`.
- `Spec.format` no longer aliases `{version}` to `{versions}`, but pulls the
concrete version out of the list and prints that -- except when the list is
is not concrete, then is falls back to `{versions}` to avoid a pedantic error.
For projections of concrete specs, `{version}` should be used to render
`1.2.3` instead of `=1.2.3` (which you would get with `{versions}`).
The default `Spec` format string used in `Spec.__str__` now uses
`{versions}` so that `str(Spec(string)) == string` holds.
## Changes to `GitVersion`
- `GitVersion` is a small wrapper around `StandardVersion` which enriches it
with a git ref. It no longer inherits from it.
- `GitVersion` _always_ needs to be able to look up an associated Spack version
if it was not assigned (yet). It throws a `VersionLookupError` whenever `ref_version`
is accessed but it has no means to look up the ref; in the past Spack would
not error and use the commit sha as a literal version, which was incorrect.
- `GitVersion` is never equal to `StandardVersion`, nor is satisfied by it. This
is such that we don't lose transitivity. This fixes the following bug on `develop`
where `git_version_a == standard_version == git_version_b` does not imply
`git_version_a == git_version_b`. It also ensures equality always implies equal
hash, which is also currently broken on develop; inclusion tests of a set of
versions + git versions would behave differently from inclusion tests of a
list of the same objects.
- The above means `ver("ref=1.2.3) != ver("=1.2.3")` could break packages that branch
on specific versions, but that was brittle already, since the same happens with
externals: `pkg@1.2.3-external` suffixes wouldn't be exactly equal either. Instead,
those checks should be `x.satisfies("@1.2.3")` which works both for git versions and
custom version suffixes.
- `GitVersion` from commit will now print as `<hash>=<version>` once the
git ref is resolved to a spack version. This is for reliability -- version is frozen
when added to the database and queried later. It also improves performance
since there is no need to clone all repos of all git versions after `spack clean -m`
is run and something queries the database, triggering version comparison, such
as potentially reuse concretization.
- The "empty VerstionStrComponent trick" for `GitVerison` is dropped since it wasn't
representable as a version string (by design). Instead, it's replaced by `git`,
so you get `1.2.3.git.4` (which reads 4 commits after a tag 1.2.3). This means
that there's an edge case for version schemes `1.1.1`, `1.1.1a`, since the
generated git version `1.1.1.git.1` (1 commit after `1.1.1`) compares larger
than `1.1.1a`, since `a < git` are compared as strings. This is currently a
wont-fix edge case, but if really required, could be fixed by special casing
the `git` string.
- Saved, concrete specs (database, lock file, ...) that only had a git sha as their
version, but have no means to look the effective Spack version anymore, will
now see their version mapped to `hash=develop`. Previously these specs
would always have their sha literally interpreted as a version string (even when
it _could_ be looked up). This only applies to databases, lock files and spec.json
files created before Spack 0.20; after this PR, we always have a Spack version
associated to the relevant GitVersion).
- Fixes a bug where previously `to_dict` / `from_dict` (de)serialization would not
reattach the repo to the GitVersion, causing the git hash to be used as a literal
(bogus) version instead of the resolved version. This was in particularly breaking
version comparison in the build process on macOS/Windows.
## Installing or matching specific versions
- In the past, `spack install pkg@3.2` would install `pkg@=3.2` if it was a
known specific version defined in the package, even when newer patch releases
`3.2.1`, `3.2.2`, `...` were available. This behavior was only there because
there was no syntax to distinguish between `3.2` and `3.2.1`. Since there is
syntax for this now through `pkg@=3.2`, the old exact matching behavior is
removed. This means that `spack install pkg@3.2` constrains the `pkg` version
to the range `3.2`, and `spack install pkg@=3.2` constrains it to the specific
version `3.2`.
- Also in directives such as `depends_on("pkg@2.3")` and their when
conditions `conflicts("...", when="@2.3")` ranges are ranges, and specific
version matches require `@=2.3.`.
- No matching version: in the case `pkg@3.2` matches nothing, concretization
errors. However, if you run `spack install pkg@=3.2` and this version
doesn't exist, Spack will define it; this allows you to install non-registered
versions.
- For consistency, you can now do `%gcc@10` and let it match a configured
`10.x.y` compiler. It errors when there is no matching compiler.
In the past it was interpreted like a specific `gcc@=10` version, which
would get bootstrapped.
- When compiler _bootstrapping_ is enabled, `%gcc@=10.2.0` can be used to
bootstrap a specific compiler version.
## Other changes
- Externals, compilers, and develop spec definitions are backwards compatible.
They are typically defined as `pkg@3.2.1` even though they should be
saying `pkg@=3.2.1`. Spack now transforms `pkg@3` into `pkg@=3` in those cases.
- Finally, fix strictness of `version(...)` directive/declaration. It just does a simple
type check, and now requires strings/integers. Floats are not allowed because
they are ambiguous `str(3.10) == "3.1"`.
`spack buildcache create` is a misnomer cause it's the only way to push to
an existing buildcache (and it in fact calls binary_distribution.push).
Also we have `spack buildcache update-index` but for create the flag is
`--rebuild-index`, which is confusing (and also... why "rebuild"
something if the command is "create" in the first place, that implies it
wasn't there to begin with).
So, after this PR, you can use either
```
spack buildcache create --rebuild-index
```
or
```
spack buildcache push --update-index
```
Also, alias `spack buildcache rebuild-index` to `spack buildcache
update-index`.
Spack never parsed `nagfor` linker arguments put on the compiler line:
```
nagfor -Wl,-Wl,,-rpath,,/path
````
so, let's continue not attempting to parse that.
`buildcache create --rel`: deprecate this because there is no point in
making things relative before tarballing; on install you need to expand
`$ORIGIN` / `@loader_path` / relative symlinks anyways because some
dependencies may actually be in an upstream, or have different
projections.
`buildcache install --allow-root`: this flag was propagated through a
lot of functions but was ultimately unused.
This switches the default Make build type to `build_type=Release`.
This offers:
- higher optimization level, including loop vectorization on older GCC
- adds NDEBUG define, which disables assertions, which could cause speedups if assertions are in loops etc
- no `-g` means smaller install size
Downsides are:
- worse backtraces (though this does NOT strip symbols)
- perf reports may be useless
- no function arguments / local variables in debugger (could be of course)
- no file path / line numbers in debugger
The downsides can be mitigated by overriding to `build_type=RelWithDebInfo` in `packages.yaml`,
if needed. The upside is that builds will be MUCH smaller (and faster) with this change.
---------
Co-authored-by: Gregory Becker <becker33@llnl.gov>
* Vendor ruamel.yaml v0.17.21
* Add unit test for whitespace regression
* Add an abstraction layer in Spack to wrap ruamel.yaml
All YAML operations are routed through spack.util.spack_yaml
The custom classes have been adapted to the new ruamel.yaml
class hierarchy.
Fixed line annotation issue in "spack config blame"
This ensures that:
a) no externals are added to the tarball metadata file
b) no externals are added to the prefix to prefix map on install, also
for old tarballs that did include externals
c) ensure that the prefix -> prefix map is always string to string, and
doesn't contain None in case for some reason a hash is missing
* Disable module generation by default (#35564)
a) It's used by site administrators, so it's niche
b) If it's used by site administrators, they likely need to modify the config anyhow, so the default config only serves as an example to get started
c) it's too arbitrary to enable tcl, but disable lmod
* Remove leftover from old module file schema
* Warn if module file config is detected and generation is disabled
---------
Co-authored-by: Harmen Stoppels <harmenstoppels@gmail.com>
Change the signature of the Environment.__init__ method to have
a single argument, i.e. the directory where the environment manifest
is located. Initializing that directory is now delegated to a function
taking care of all the error handling upfront. Environment objects
require a "spack.yaml" to be available to be constructed.
Add a class to manage the environment manifest file. The environment
now delegates to an attribute of that class the responsibility of keeping
track of changes modifying the manifest. This allows simplifying the
updates of the manifest file, and helps keeping in sync the spec lists in
memory with the spack.yaml on disk.
Spack comes to a crawl post-install of nvhpc, which is partly thanks to
this post install hook which has a lot of redundancy, and isn't correct.
1. There's no need to store "type" because that _is_ "mode".
2. There are more file types than "symlink", "dir", "file".
3. Don't checksum device type things
4. Don't run 3 stat calls (exists, stat, isdir/islink), but one lstat
call
5. Don't read entire files into memory
I also don't know why `spack.crypto` wasn't used for checksumming, but I
guess it's too late for that now. Finally md5 would've been the faster
algorithm, which would've been fine given that a non cryptographicall
checksum was used anyways.
If we modify both Path and PATH, on Windows they will clobber one
another. This PR updates the shell modification logic to automatically
convert variable names to upper-case on Windows.
- [x] Replace `version(ver, checksum=None, **kwargs)` signature with
`version(ver, checksum=None, *, sha256=..., ...)` explicitly listing all arguments.
- [x] Fix various issues in packages:
- `tags` instead of `tag`
- `default` instead of `preferred`
- `sha26` instead of `sha256`
- etc
Also, use `sha256=...` consistently.
Note: setting `sha256` currently doesn't validate the checksum length, so you could do
`sha256="a"*32` and it would get checked as `md5`... but that's something for another PR.
This means that `spack install` will now build the minimal set of packages
required to install the root(s).
To opt out of build edge pruning, use `spack install --include-build-deps`.
Co-authored-by: Harmen Stoppels <harmenstoppels@gmail.com>
Other tools like git support `GIT_EDITOR` which takes higher precedence than the
standard `VISUAL` or `EDITOR` variables. This adds similar support for Spack, in the
`SPACK_EDITOR` env var.
- [x] consolidate editor code from hooks into `spack.util.editor`
- [x] add more editor tests
- [x] add support for `SPACK_EDITOR`
- [x] add a documentation section for controlling the editor and reference it
Code from `spack.util.editor` was duplicated into our licensing hook in #11968. We
really only want one place where editor search logic is implemented. This consolidates
the logic into `spack.util.editor`, including a special case to run `gvim` with `-f`.
- [x] consolidate editor search logic in spack.util.editor
- [x] add tests for licensing case, where `Executable` is used instead of `os.execv`
- [x] make `_exec_func` argument of `editor()` into public `exec_fn` arg
- [x] add type annotations
fixes#36628
Fix using compilers that declare "target: any" in their
configuration. This should happen only on Cray with the
module based programming environment.
* Simplify test/cmd/ci.py::test_ci_generate_with_custom_scripts
* Rearrange the build-job logic in generate_gitlab_ci_yaml
* Preserve all unknown attributes in build jobs
* Slip tests for custom attributes in the tests for other job types
* Support custom artifacts
* [@spackbot] updating style on behalf of blue42u
* Don't bother sorting needs
---------
Co-authored-by: blue42u <blue42u@users.noreply.github.com>
Other tools like git support `GIT_EDITOR` which takes higher precedence than the
standard `VISUAL` or `EDITOR` variables. This adds similar support for Spack, in the
`SPACK_EDITOR` env var.
- [x] consolidate editor code from hooks into `spack.util.editor`
- [x] add more editor tests
- [x] add support for `SPACK_EDITOR`
- [x] add a documentation section for controlling the editor and reference it
Code from `spack.util.editor` was duplicated into our licensing hook in #11968. We
really only want one place where editor search logic is implemented. This consolidates
the logic into `spack.util.editor`, including a special case to run `gvim` with `-f`.
- [x] consolidate editor search logic in spack.util.editor
- [x] add tests for licensing case, where `Executable` is used instead of `os.execv`
- [x] make `_exec_func` argument of `editor()` into public `exec_fn` arg
- [x] add type annotations
* lmod modules: allow users to remove items from hierarchy per-spec
This allows MPI wrappers that depend on MPI to be removed from the MPI portion of
the hierarchy and be made available when the appropriate compiler is loaded.
module load gcc
module load mpi-wrapper # implicitly loads mpi
module load hdf5
This allows users to treat an mpi wrapper like an mpi program
This commit changes the environment modifications class to escape
strings with double quotes instead of single quotes.
Single quotes prevent the expansion of enviornment variables that are
nested within environment variable definitions.
Fixes#36689
- The "base" builder class should be last in the MRO
- `filter_compiler_wrappers` needs to be moved to builders
- Decorating a function from a mixin class require using
the correct metaclass for the mixin
This aims to resolve#34164 by resolving the <include-fragment> tags
that GitHub has started using for their release pages, see
https://github.github.io/include-fragment-element/.
This feels a bit hacky but intended as a starting point for discussion.
After reading a page during spidering, it first parses for
include-fragments, gets them all, and treats them all as separate pages.
Then it looks for href links in both the page itself and the fragments.
Co-authored-by: Alec Scott <alec@bcs.sh>
MSVC compilers rely on vcvars environment setup scripts to establish
build environement variables neccesary for all projects to build
successfully. Prior to this we were only piping LIB, INCLUDE, and PATH
change through.
Instead we need to propegate all changes to the env variables made by
VCVARs in order to establish robust support for the MSVC compiler.
This most significantly impacts projects that need to be build with
NMake and MSBuild
* CI: Fixup docs for bootstrap.
* CI: Add compatibility shim
* Add an update method for CI
Update requires manually renaming section to `ci`. After
this patch, updating and using the deprecated `gitlab-ci` section
should be possible.
* Fix typos in generate warnings
* Fixup CI schema validation
* Add unit tests for legacy CI
* Add deprecated CI stack for continuous testing
* Allow updating gitlab-ci section directly with env update
* Make warning give good advice for updating gitlab-ci
* Fix typo in CI name
* Remove white space
* Remove unneeded component of deprected-ci
* Extract a method to warn when the manifest is not up-to-date
* Extract methods to update the repository and ensure dir exists
* Simplify further the write method, add failing unit-test
* Fix the function computing YAML equivalence between two instances
Previously `spack -e bla config update <section>` would treat the
environment config scope as standard config file instead of a single
file config scope. This fixes that.
When app is uninstalled, if it matches a default, then remove the
default symlink targeting its modulefile.
Until now, when a default were uninstalled, the default symlink were
left pointing to a nonexistent modulefile.
- Update default image to Ubuntu 22.04 (previously was still Ubuntu 18.04)
- Optionally use depfiles to install the environment within the container
- Allow extending Dockerfile Jinja2 template
- Allow extending Singularity definition file Jinja2 template
- Deprecate previous options to add extra instructions
* Reduce effort on grounding by employing cardinality constraints
If we use a cardinality constraint instead of a rule
using pair of values, we'll end up grounding 1 rule
instead of all the possible pair combinations of the
allowed values.
* Display all errors from concretization, instead of just one
If clingo produces multiple "error" facts, we now print all
of them in the error message. Before we were printing just
the one with the least priority.
Consolidate a few common patterns in concretize.lp to ensure
that certain node attributes have one and only one value
assigned.
All errors are displayed, so use a single criterion
instead of three.
* Account for weights in concretize.lp
To recover the optimization order we had before, account
for weights of errors when minimizing.
The priority is mapped to powers of 10, so to effectively
get back the same results as with priorities.
When generating modulefile, correctly detect software installation asked
by user as explicit installation.
Explicit installation status were previously fetched from database
record of spec, which was only set after modulefile generation.
Code is updated to pass down the explicit status of software
installation to the object that generates modulefiles.
Fixes#34730.
Fixes#12105.
A value for the explicit argument has to be set when creating a new
installation, but for operations on existing installation, this value is
retrieved from database. Such operations are: module rm, module refresh,
module setdefaults or when get_module function is used.
Update on the way tests that mimics an installation, thus explicit
argument has to be set under such situation.
Add `config:stage_name` which is a Spec format string that can
customize the names of stages created by Spack. This was primarily
created to allow generating shorter stage names on Windows (along
with `config:build_stage`, this can be used to create stages with
short absolute paths).
By default, this is not set and the prior name stage format is used.
This also removes the username component that is always added to
Stage paths on Windows (if users want to include this, they can
add it to the `build_stage`).
* compiler wrapper: fix -Xlinker parsing
* handle the case of -rpath without value; avoid that we drop the flag
* also handle the -Xlinker -rpath -Xlinker without further args case...
* fix test
* get rid of global $rp var, reduce branching
- [x] Specs that define 'new' versions in the require: section need to generate associated facts to indicate that those versions are valid.
- [x] add test to verify success with unknown versions.
- [x] remove unneeded check that was leading to extra complexity and test
failures (at this point, all `hash=version` does not require listing out that version
in `packages.yaml`)
- [x] unique index for origin (dont reuse 0)
Co-authored-by: Peter Josef Scheibel <scheibel1@llnl.gov>
Add a `find_first` method that locates one instance of a file
that matches a specified pattern by recursively searching a directory
tree. Unlike other `find` methods, this only locates one file at most,
so can use optimizations that avoid searching the entire tree:
Typically the relevant files are at low depth, so it makes sense to
locate files through iterative deepening and early exit.
Update tcl and lmod modulefile template to provide more information on
help message (name, version and target) like done on whatis for lmod
modulefiles.
Adapt tcl and lmod modulefile templates to generate append-path or
remove-path commands in modulefile when respectively append_flags or
remove_flags commands are defined in package for run environment.
Fixes#10299.
Simplify environment modification block in modulefile Tcl template by
always setting a path delimiter to the prepend-path, append-path and
remove-path commands.
Remove --delim option to the setenv command as this command does not
allow such option.
Update test_prepend_path_separator test to explicitly check the 6
path-like commands that should be present in generated modulefile.
fixes#36339
We were missing a rule that enforced a match between
the `node_compiler` and the compiler used to satisfy
a requirement.
Fix compiler with custom, made up version too
* Specs that define 'new' versions in the require: section need to generate
associated facts to indicate that those versions are valid.
* add test to verify success with unknown versions.
Since environment-modules has support for autoloading since 4.2,
and Spack-builds of it enable it by default, use the same autoload
default for tcl as lmod.
If you have a "require:" section in your packages config, and you
use it to specify a list of requirements, the list elements can
now include strings (before this, each element in the list had to
be a `one_of` or `any_of` specification, which is awkward if you
wanted to apply just one spec with no alternatives).
Example one:
```
spack install --add x y z
```
is equivalent to
```
spack add x y z
spack concretize
spack install --only-concrete
```
where `--only-concrete` installs without modifying spack.yaml/spack.lock
Example two:
```
spack install
```
concretizes current spack.yaml if outdated and installs all specs.
Example three:
```
spack install x y z
```
concretizes current spack.yaml if outdated and installs *only* concrete
specs in the environment that match abstract specs `x`, `y`, or `z`.
The `ignore` parameter was only used for `spack activate/deactivate`, and it isn't used
by Spack Environments which have their own handling of file conflicts. We should remove it.
Everything that handles `ignore=` was removed in #29317 and included in 0.19, when we
removed `spack activate` and `spack deactivate` in favor of environments. So all of these
usages removed here were already being ignored by Spack.
Adapt tcl modulefile template to call "module load" on autoload
dependency without testing if this dependency is already loaded or not.
The is-loaded test is not necessary, as module commands know how to cope
with an already loaded module. With environment-modules 4.2+ (released
in 2018) it is also important to have this "module load" command even if
dependency is already loaded in order to record that the modulefile
declares such dependency. This is important if you want to keep a
consistent environment when a dependent module is unloaded.
The "Autoloading" verbose message is also removed as recent module
commands will report such information to the user (depending on the
verbosity configured for the module command).
Such change has been test successfully with Modules 3.2 (EL7), 4.5 (EL8)
and 5.2 (latest) and also with Lmod 7 and 8 (as it is mentionned in
Spack docs that Lmod can be used along with tcl modules). Dependencies
are correctly loaded or unloaded, whether they are loaded/unloaded or
not.
This change fixes Tcl quoting issue introduced in #32853.
Fixes#19155.
In the Windows filesystem logic for creating a symlink, we intend to
fall back to a copy when the symlink cannot be created (for some
configuration settings on Windows it is not possible for the user
to create a symlink). It turns out we were overly-broad in which
exceptions lead to this fallback, and the subsequent copy would
also fail: at least one case where this occurred is when we
attempted to create a symlink that already existed.
The updated logic expressly avoids falling back to a copy when the
file/symlink already exists.
* ASP-based solver: use satisfies instead of intersects
They are semantically equivalent for concrete versions,
but the GitVersion.intersects implementation is buggy
* Mitigation for git version bug
fixes#36134
This commit works around the issue in #36134, by using
GitVersion.satisfies instead of GitVersion.intersects
There are still underlying issues when trying to infer the
"reference version" when no explicit one is given, but:
1. They are not reproducible with our synthetic repo
2. They occur only when the `git.<xxx>` form of Git version
is used
Here we just work around the user facing issue and ensure
the tests are correct with our synthetic repository.
This PR does 2 unrelated things:
1. It changes the encoding of the compilers
2. It tweaks the heuristic for the solves in a0d88179074f81d13a3fad629a43d86334e7f982
Both were initially motivated by trying to get a performance gain but, while 2 showed significant speed-ups[^1], 1 instead didn't. I kept it anyhow, since I think the code related to compilers is more consolidated with the new encoding and we might get some performance improvement out of it if we can base our errors on the `node_compiler(Package, CompilerID)` atoms instead of `attrs`.
[^1]: In general the changes in the heuristic brought a ~10% speed-up on the tests I did. I'll post detailed results below.
Add a warning about compilers.yaml that is triggered if there are multiple compilers with the same spec, os and
target (since they can't be selected by users with the spec syntax only).
Since GPG clear-sign cannot deal with lines longer than 19995 characters
and doesn't even error but simply truncates those linese (don't ask me
why...), we have to be careful not to hit that line limit when reducing
the filesize.
So, instead this PR sets the indent level to 0 and drops the whitespace
after `: `, which still reduces file size by 50% or so.