Provide up to date specs for build options
Remove non-production versions
Format using autopep8 and flake8
Separate cmake options in adios2 2.4.0 version
Keep default as True as much as possible
Support for Python 2 and 3 for adios2 versions <= 2.4.0
Starting v2.5.0 only Python 3 is supported
Addressing review suggestions
* Add new ACTS releases
* Update ACTS dependency requirements
* We can actually be more specific here
* The material plugin is gone as of ACTS v0.10.0
* Add 0.10.4 release
* Remove material mapping plugin
It was merged into core as of 0.10.x, and given ACTS' youth it is unlikely to have actual users at this point in time.
* Minor clean-up of package information.
* Add variants, fix dependencies, and add conflicts for compilers that do not support C++17.
* Correct dependency type for CMake.
- Add a test that verifies checksums on all packages
- Also add an attribute to packages that indicates whether they need a
manual download or not, and add an exception in the tests for these
packages until we can verify them.
Some packages had incorrect checksums because they needed to be
downloaded from a new place or the package needed tweaking somehow.
These packages to sha256 and the new checksums have been verified by
fetching over https.
These packages have either been retired or are no longer retrievable from
any site we can find. They also aren't needed by other packages, so we're
removing them from Spack.
- allinea-reports: is now arm performance reports
- globus-toolkit: retired, globus is now a paid service.
- uberftp: used globus-toolkit, github site is retired.
- mpiblast: site is dead; no longer fetchable.
- py-mxnet: site and github are gone
- soap2, soapindel, soapsnp: site is gone, unfetchable
- arlecore: could not verify md5 securely
We'd like to use a consistent checksum scheme everywhere so that we can:
a) incorporate archive checksums into our specs and have a
consistent hashing algorithm across all specs.
b) index mirrors with a consistent type of checksum, and not one that
is dependent on how spack packages are written.
- [x] convert existing md5, sha224, sha512, sha1 checksums to sha256
* py-line-profiler: add 2.1.2, re-run cython if needed
See rkern/line_profiler#166.
* Update var/spack/repos/builtin/packages/py-line-profiler/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* Addition of 1.1.3 and 1.1.4
* Addition of conditional enum-34 installation.
* Update var/spack/repos/builtin/packages/py-maestrowf/package.py
Addition of versioning for pyyaml.
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* Addition of enum34 back to older versions 1.1.3 and below.
* adjust building of OpenFOAM 1806 and earlier
- spack now unpacks into spack-src, but earlier OpenFOAM versions
still expect particular directory names (eg, OpenFOAM-v1806).
Resolve by creating a symlink during patching.
* replace openfoam 1806 patch with URL version
* fujitsu-mpi: commit new package
* Add homepage.
* * Modified the MPI commands to a simple form.
* Unnecessary processing has been deleted.
* Add conflict for all compilers except the Fujitsu compiler.
* Fix typo.
* Delete versions.
* Delete conditions for specifying the Fujitsu compiler.
* fftw: grouped precisions in a single variant
* fftw: simd options are now based on target features and not on variants
* fftw: simplified computing the selected precisions
* fix ipykernel dependency, newer versions are python3-only
* Update var/spack/repos/builtin/packages/py-ipykernel/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-ipykernel/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
Dotkit is being used only at a few sites and has been deprecated on new
machines. This commit removes all the code that provide support for the
generation of dotkit module files.
A new validator named "deprecatedProperties" has been added to the
jsonschema validators. It permits to prompt a warning message or exit
with an error if a property that has been marked as deprecated is
encountered.
* Removed references to dotkit in the docs
* Removed references to dotkit in setup-env-test.sh
* Added a unit test for the 'deprecatedProperties' schema validator
* libint: switch to 2-stage build for 2.6.0+
* libint: add tune and fortran variants
* cp2k: add support for libint >= 2.0
* cp2k: use pkg-config for linking libxc
* github releases are not released versions, but from-source
releases
* they lack the mimification of the JS/CSS components and as
such require node-js and npm, this conflicts with python@3:
* this commit
* drops the from-source dependencies on node-js and npm and
* updates the checksums to the correct sha256 hashes of the
pypi releases. The pypi-tarballs are different
* ZFP: CMake Package
ZFP is primarily build via CMake, which will have all install logic
and configuration files generated.
The 0.5.0 release did not support this yet, so we toss it.
* Patch ADIOS1: ZFP 0.5.1+ support
* ZFP: Expose all CMake variants
* new package: py-python-ldap
* fix dependency types
* improvements
* Update var/spack/repos/builtin/packages/py-python-ldap/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-python-ldap/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* add openldap dependency
* go-md2man: disable module-mode
* Update var/spack/repos/builtin/packages/go-md2man/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* add singularity 3.4.1
Signed-off-by: ArangoGutierrez <eduardo@sylabs.io>
* revert some changes
Signed-off-by: ArangoGutierrez <eduardo@sylabs.io>
* add maintainers list to pkg singularity
Add @alalazo and me to the Singularity maintainers list
* Update var/spack/repos/builtin/packages/singularity/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/singularity/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/singularity/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
7bcb306 updated setup_environment in the GCC package to examine the
bin/ directory to find alternatively-named instances of CC, but this
failed to account for when GCC was being installed and failed when
it attempted to list the not-yet-existing installation prefix. This
commit updates the logic to skip this search if the bin/ directory
doesn't exist.
* libaio: fixed a condition that checks whether we are running on OS X
* libaio: simplified package by adding an explicit conflict for darwin
* libaio: added information to the docstring
* fio: added version 3.16, added conflict when using libaio, docstring
* lvm2: conflict due to libaio dep, improved docstring, simpler install
* mariadb: conflict due to libaio dep, improved docstring, version 10.4.7
* mariadb: the dependency on libaio is now conditional, removed conflict
* mariadb: fixed a typo in previous commit
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* libaio: turned into a MakefilePackage
Unlike the compiler binary name search logic, the `setup_environment` in
GCC's package assumes the compiler names are *exactly* `gcc`, `g++`,
etc. In many external installations (Homebrew, Macports) the
installation includes only *suffixed* versions such as `gcc-9`.
This patch uses the GCC compiler search suffixes to actually locate the
correct filenames for the installed compilers, allowing the
Spack-generated module file to have useful definitions of CC, CXX, etc.
It also allows for the possibility that the user's external installation
of GCC is compiled without Fortran support, in which case the `FC`
environment variables are not defined.
* The perl-uri-escape package duplicates perl-uri
The Perl URI::Escape module is in the Perl URI package so the Spack
perl-uri-escape package is a duplicate of the perl-uri package. This PR
does the following:
- replace `depends_on('perl-uri-escape')` with `depends_on('perl-uri')`
in packages that dependend on perl-uri-escape
- add the version from perl-uri-escape to perl-uri
- remove the unneeded dependency from perl-uri
- remove the perl-uri-escape package
* Reinstated perl-test-needs dependency
Put the perl-test-needs dependency for perl-uri back in but set it to
type='test'.
* For tests to succeed the type must be ('build', 'test')
Now that Spack injects microarchitecture specific optimizations for
the selected target, packages should avoid adding flags that could
step over those.
This PR adds interproscan-4.8, which has a completely different build
system than version 5. Note that this builds for running on a host as
opposed to a queue system. I am fairly certain that a queue system can
be configured later.
This PR also adds a patch for intrproscan-5 to build when the user
building the packages has a large GID by setting posix mode for tar.
* llvm: fixed issues with syntax and formatting
* use spec.architecture.target.family
* use spec.target instead of spec.architecture.target
* mesa: use == instead of __contains__
A function added to this package ran as part of importing it and
printed a warning for most Spack invocations, this removes the
warning message.
Also:
* Use compilers directly instead of Spack compiler wrappers (since
references to the compiler are embedded in text and binary files
of the installation)
* Add 'cross' variant for setting CROSS environment variable for
build
* Set UPCXX_INSTALL for generated module files
* Set UPCXX_GASNET_CONDUIT/UPCXX_NETWORK in generated module files
on Cray systems
* Also set UPCXX_NETWORK in build environment for Cray systems
