Add an abstraction around libllvm to allow libllvm
providers to be specified for all packages.
This is targeting allowing mesa to build against
llvm-amdgpu or intel-llvm or llvm or any other
custom llvm variant that arises for specific GPU
toolchains
There were some loose ends left in ##26735 that cause errors when
using `SPACK_DISABLE_LOCAL_CONFIG`.
- [x] Fix hard-coded `~/.spack` references in `install_test.py` and `monitor.py`
Also, if `SPACK_DISABLE_LOCAL_CONFIG` is used, there is the issue that
`$user_config_path`, when used in configuration files, makes no sense,
because there is no user config scope.
Since we already have `$user_cache_path` in configuration files, and since there
really shouldn't be *any* data stored in a configuration scope (which is what
you'd configure in `config.yaml`/`bootstrap.yaml`/etc., this just removes
`$user_config_path`.
There will *always* be a `$user_cache_path`, as Spack needs to write files, but
we shouldn't rely on the existence of a particular configuration scope in the
Spack code, as scopes are configurable, both in number and location.
- [x] Remove `$user_config_path` substitution.
- [x] Fix reference to `$user_config_path` in `etc/spack/deaults/bootstrap.yaml`
to refer to `$user_cache_path`, which is where it was intended to be.
Spack's `system` and `user` scopes provide ways for administrators and
users to set global defaults for all Spack instances, but for use cases
where one wants a clean Spack installation, these scopes can be undesirable.
For example, users may want to opt out of global system configuration, or
they may want to ignore their own home directory settings when running in
a continuous integration environment.
Spack also, by default, keeps various caches and user data in `~/.spack`,
but users may want to override these locations.
Spack provides three environment variables that allow you to override or
opt out of configuration locations:
* `SPACK_USER_CONFIG_PATH`: Override the path to use for the
`user` (`~/.spack`) scope.
* `SPACK_SYSTEM_CONFIG_PATH`: Override the path to use for the
`system` (`/etc/spack`) scope.
* `SPACK_DISABLE_LOCAL_CONFIG`: set this environment variable to completely
disable *both* the system and user configuration directories. Spack will
only consider its own defaults and `site` configuration locations.
And one that allows you to move the default cache location:
* `SPACK_USER_CACHE_PATH`: Override the default path to use for user data
(misc_cache, tests, reports, etc.)
With these settings, if you want to isolate Spack in a CI environment, you can do this:
export SPACK_DISABLE_LOCAL_CONFIG=true
export SPACK_USER_CACHE_PATH=/tmp/spack
This is a stop-gap approach until we have figured out how to deal with
the system and user config scopes more generally, as there are plans to
potentially / eventually get rid of them.
**User config**
Spack is a bit of a pain when you have:
- a shared $HOME folder across different systems.
- multiple Spack versions on the same system.
**System config**
- On shared systems with a versioned programming environment / toolkit,
system administrators want to provide config for each version (e.g.
21.09, 21.10) of the programming environment, and the user Spack
instance should be able to pick this up without a steep learning
curve.
- On shared systems the user should be able to opt out of the
hard-coded config scope in /etc/spack, since it may be incompatible
with their particular instance. Currently Spack can only opt out of all
config scopes through overrides with `"config:":`, `"packages:":`, but that
also drops the defaults config, which would have to be repeated, which
is undesirable, especially the lengthy packages.yaml.
An example use case is: having config in this folder:
```
/path/to/programming/environment/{version}/{compilers,packages}.yaml
```
and have `module load spack-system-config` set the variable
```
SPACK_SYSTEM_CONFIG_PATH=/path/to/programming/environment/{version}
```
where the user no longer has to worry about what `{version}` they are
on.
**Continuous integration**
Finally, there is the use case of continuous integration, which may
clone an arbitrary Spack version, which optimally should not pick up
system or user config from the previous run (like may happen in
classical bare metal non-containerized filesystem side effect ridden
jenkins pipelines). In fact this is very similar to how spack itself
tries to avoid picking up system dependencies during builds...
**But environments solve this?**
- You could do `include`s in environment files to get similar behavior
to the spack_system_config_path example, but environments require you
to:
1) require paths to individual config files, not directories.
2) fail if the listed config file does not exist
- They allow you to override config scopes, but this is generally too
rigurous, as it requires you to repeat the default config, in
particular packages.yaml, and just defies the point of layered config.
Co-authored-by: Tom Scogland <tscogland@llnl.gov>
Co-authored-by: Tim Fuller <tjfulle@sandia.gov>
Co-authored-by: Steve Leak <sleak@lbl.gov>
Co-authored-by: Todd Gamblin <tgamblin@llnl.gov>
Installing packages with a lot of dependencies does not have an easy way
of judging the current progress (apart from running `spack spec -I pkg`
in another terminal). This change allows Spack to update the terminal's
title with status information, including its current progress as well as
information about the current and total number of packages.
Modifications:
- [x] Change `defaults/config.yaml`
- [x] Add a fix for bootstrapping patchelf from sources if `compilers.yaml` is empty
- [x] Make `SPACK_TEST_SOLVER=clingo` the default for unit-tests
- [x] Fix package failures in the e4s pipeline
Caveats:
1. CentOS 6 still uses the original concretizer as it can't connect to the buildcache due to issues with `ssl` (bootstrapping from sources requires a C++14 capable compiler)
1. I had to update the image tag for GitlabCI in e699f14.
1. libtool v2.4.2 has been deprecated and other packages received some update
* Bootstrap clingo from binaries
* Move information on clingo binaries to a JSON file
* Add support to bootstrap on Cray
Bootstrapping on Cray requires, at the moment, to
swap the platform when looking for binaries - due
to #22800.
* Add SHA256 verification for bootstrapped software
Use sha256 verification for binaries necessary to bootstrap
the concretizer and gpg for signature verification
* patchelf: use Spec._old_concretize() to bootstrap
As noted in #24450 we may happen to need the
concretizer when bootstrapping clingo. In that case
only the old concretizer is available.
* Add a schema for bootstrapping methods
Two fields have been added to bootstrap.yaml:
"sources" which lists the methods available for
bootstrapping software
"trusted" which records if a source is trusted or not
A subcommand has been added to "spack bootstrap" to list
the sources currently available.
* Methods used for bootstrapping are configurable from bootstrap:sources
The function that tries to ensure a given Python module
is importable now tries bootstrapping methods in the same
order as they are defined in `bootstrap.yaml`
* Permit to trust/untrust bootstrapping methods
* Add binary tests for MacOS, Ubuntu
* Add documentation
* Add a note on bash
- Change config from the undocumented `use_curl: true/false` to `url_fetch_method: urllib/curl`.
- Documentation of `url_fetch_method` in `defaults/config.yaml`
- Default fetch option explicitly set to `urllib` for users who may not have curl on their system
To upgrade from `use_curl` to `url_fetch_method`, run `spack config update config`
* pbs: new virtual package
Some of our clusters have an older installation of
libtorque and tm.h that are *not* from OpenPBS. Using the current
openpbs dependency for openmpi causes concretization errors due to
restrictions on older python and hwloc requirements that don't apply,
even with an external non-buildable installation.
The new 'torque' bundle package allows users to point to that external
installation without problems.
Detailed description of torque by Sergey Kosukhin <skosukhin@gmail.com>
* Permit to enable/disable bootstrapping and customize store location
This PR adds configuration handles to allow enabling
and disabling bootstrapping, and to customize the store
location.
* Move bootstrap related configuration into its own YAML file
* Add a bootstrap command to manage configuration
* Switch hdf5 package from autotools to cmake.
* Add variant for building with zlib, default to ON.
* Update for format requirements.
* Format change.
* Fix breakage from last merge from develop.
Switch szip to use libaec (unrestricted encryption).
Remove 'static' variant: static libs will only be installed when
~shared.
* Improve args based on suggestions from pull request.
* Update code URL to github.com
Add/modify 4 depends_on lines to fix running "spack graph --deptype=link hdf5".
* Remove trailing whitespace.
* Remove dependencies added solely to make "spack greph --type=link" work.
* Add new version HDF5 1.8.22.
* Remove unnecessary java_check.
* Fix whitespace for style checks.
* Reverted zlib version dependency to 1.1.2:.
zlib variant removed.
api version default renamed "default".
* Remove blank line.
* Whitespace corrections.
* iRemoved unnecessary 'debug' variant.
* Fix typo in version number in conflict for '+szip'.
* Set default for tools variant to True.
Remove patch functions dependent on 'libtool' file that cmake doesn't
produce.
* Remove line to set ONLY_SHARED_LIBS to true.
Add post_install code to install only one version of tools with shared
linkage and original tool names.
* Remove trailing white space and import of glob package not used.
* Leave BUILD_TESTING set to default which is ON.
* Remove post_install code to install only one version of tools because
some dependent packages running tests in e4s testing are using
h5diff-shared. Keep both tools versions for now.
* No longer need to import os.
This adds a package for `irep`, a tool for reading `lua` input decks from
Fortran, C, and C++.
`irep` can be built with either `lua` or `luajit`. To address this, we also add
a virtual package for lua called `lua-lang`. `luajit` isn't, by default, a drop-in
replacement for `lua`, but we add a `+lualinks` variant to it that adds symlinks
that make it behave like `lua@5.1`. With this variant enabled, it provides the
`lua-lang` virtual. `lua` always provides `lua-lang`.
- [x] add `irep` package
- [x] add `+lualinks` variant to `lua-luajit`
- [x] create `lua-lang` virtual, provided by `lua` and `luajit+lualinks`
Co-authored-by: Kayla Richarda Butler <butler59@quartz1148.llnl.gov>
Co-authored-by: Todd Gamblin <tgamblin@llnl.gov>
Currently, module configurations are inconsistent because modulefiles are generated with the configs for the active environment, but are shared among all environments (and spack outside any environment).
This PR fixes that by allowing Spack environments (or other spack config scopes) to define additional sets of modules to generate. Each set of modules can enable either lmod or tcl modules, and contains all of the previously available module configuration. The user defines the name of each module set -- the set configured in Spack by default is named "default", and is the one returned by module manipulation commands in the absence of user intervention.
As part of this change, the module roots configuration moved from the config section to inside each module configuration.
Additionally, it adds a feature that the modulefiles for an environment can be configured to be relative to an environment view rather than the underlying prefix. This will not be enabled by default, as it should only be enabled within an environment and for non-default views constructed with separate projections per-spec.
Spack's source mirror was previously in a plain old S3 bucket. That will still
work, but we can do better. This switches to AWS's CloudFront CDN for hosting
the mirror.
CloudFront is 16x faster (or more) than the old bucket.
- [x] change mirror to https://mirror.spack.io
Currently, module configurations are inconsistent because modulefiles are generated with the configs for the active environment, but are shared among all environments (and spack outside any environment).
This PR fixes that by allowing Spack environments (or other spack config scopes) to define additional sets of modules to generate. Each set of modules can enable either lmod or tcl modules, and contains all of the previously available module configuration. The user defines the name of each module set -- the set configured in Spack by default is named "default", and is the one returned by module manipulation commands in the absence of user intervention.
As part of this change, the module roots configuration moved from the `config` section to inside each module configuration.
Additionally, it adds a feature that the modulefiles for an environment can be configured to be relative to an environment view rather than the underlying prefix. This will not be enabled by default, as it should only be enabled within an environment and for non-default views constructed with separate projections per-spec.
TODO:
- [x] code changes to support multiple module sets
- [x] code changes to support modules relative to a view
- [x] Tests for multiple module configurations
- [x] Tests for modules relative to a view
- [x] Backwards compatibility for module roots from config section
- [x] Backwards compatibility for default module set without the name specified
- [x] Tests for backwards compatibility
* Make -j flag less exceptional
The -j flag in spack behaves differently from make, ctest, ninja, etc,
because it caps the number of jobs to an arbitrary number 16.
Spack will behave like other tools if `spack install` uses a reasonable
default, and `spack install -j <num>` *overrides* that default.
This will be particularly useful for Spack usage outside of a traditional
HPC context and for HPC centers that encourage users to compile on
login nodes with many cores instead of on compute nodes, which has
become increasingly common as individual nodes have more cores.
This maintains the existing default value of min(num_cpus, 16). However,
as it is right now, Spack does a poor job at determining the number of
cpus on linux, since it doesn't take cgroups into account. This is
particularly problematic when using distributed builds with slurm. This PR
also introduces `spack.util.cpus.cpus_available()` to consolidate
knowledge on determining the number of available cores, and improves
core detection for linux. This should also improve core detection for Docker/
Kubernetes, which also use cgroups.
Drops:
* C_INCLUDE_PATH
* CPLUS_INCLUDE_PATH
* LIBRARY_PATH
* INCLUDE
We already decided to use C_INCLUDE_PATH, CPLUS_INCLUDE_PATH, INCLUDE over CPATH here:
https://github.com/spack/spack/pull/14749
However, none of these flags apply to Fortran on Linux. So for consistency it seems better to make the user use -I and -L flags by hand or through pkgconfig.
* Procedure to deprecate old versions of software
* Add documentation
* Fix bug in logic
* Update tab completion
* Deprecate legacy packages
* Deprecate old mxnet as well
* More explicit docs
libuuid is currently contained in util-linux, libuuid and uuid. This
change introduces a new virtual provider `uuid` and renames the existing
`uuid` package to `ossp-uuid`.
util-linux's libuuid is provided in the form of a separate package
util-linux-uuid to make sure that packages depending on uuid and
util-linux can use a separate uuid implementation, which the concretizer
does not allow if libuuid is contained in util-linux.
Users can add test() methods to their packages to run smoke tests on
installations with the new `spack test` command (the old `spack test` is
now `spack unit-test`). spack test is environment-aware, so you can
`spack install` an environment and then run `spack test run` to run smoke
tests on all of its packages. Historical test logs can be perused with
`spack test results`. Generic smoke tests for MPI implementations, C,
C++, and Fortran compilers as well as specific smoke tests for 18
packages.
Inside the test method, individual tests can be run separately (and
continue to run best-effort after a test failure) using the `run_test`
method. The `run_test` method encapsulates finding test executables,
running and checking return codes, checking output, and error handling.
This handles the following trickier aspects of testing with direct
support in Spack's package API:
- [x] Caching source or intermediate build files at build time for
use at test time.
- [x] Test dependencies,
- [x] packages that require a compiler for testing (such as library only
packages).
See the packaging guide for more details on using Spack testing support.
Included is support for package.py files for virtual packages. This does
not change the Spack interface, but is a major change in internals.
Co-authored-by: Tamara Dahlgren <dahlgren1@llnl.gov>
Co-authored-by: wspear <wjspear@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Since #11598 sbang has been installed within the install_tree. This doesn’t play
nicely with install_tree padding, since sbang can’t do its job if it is installed in a
long path (this is the whole point of sbang).
This PR changes the padding specification. Instead of $padding inside paths,
we now have a separate `padding:` field in the `install_tree` configuration.
Previously, the `install_tree` looked like this:
```
/path/to/opt/spack_padding_padding_padding_padding_padding/
bin/
sbang
.spack-db/
...
linux-rhel7-x86_64/
...
```
```
This PR updates things to look like this:
/path/to/opt/
bin/
sbang
spack_padding_padding_padding_padding_padding/
.spack-db/
...
linux-rhel7-x86_64/
...
So padding is added at the start of all install prefixes *within* the unpadded
root. The database and all installations still go under the padded root.
This ensures that `sbang` is in the shorted possible path while also allowing
us to make long paths for relocatable binaries.
* [NEW] Added amdfftw, amdlibflame and amdscalapack recipes
Updated base fftw, libflame and netlib-scalapack recipes
to accommodate the above listed AMD Optimizing CPU Libraries
which are a set of numerical routines optimized for AMD platforms.
Updated amdblis spack recipe
amdblis:
1. updated with amdblis 2.2 release
amdfftw:
1. "--enable-single" now work as synonym for "--enable-float"
amdlibflame:
1. Added enable_or_disable_threads() to set value for "--enable-multithreading" flag
Libflame:
1. Added enable_or_disable_threads() to set value for "--enable-multithreading" flag
2. Corrected invocation of "enable_or_disable('threads')"
Change-Id: I9da0a2c2c4e2075b7fa2776e7cfe6548a2e0b32f
* Added amd-toolchain-support as maintainers
Added team github account amd-toolchain-support
as maintainers for all the recipes owned by
AMD Optimizing CPU Libraries (AOCL) team
Change-Id: I9a7969bd48fc42cfbb88dd7bd93e0802c6138582
* Incorporated review comments
Updated packages.yaml with aocl components
Handled Flake8 test failures
Change-Id: I0a03f02d8c9f326b2434ec907958c3de3a8e18eb
* Readded accidental removal of stream recipe
amdfftw:
1. Updated the aocc clang selection as per spack standards
fftw:
1. Currently apple-clang section is redundant,
already it is handled in the conflict checks.
Change-Id: Idef4a3f61717eb81f321e0cd16e7ba9619eac846
* Fix for style and docs/validate (pull_request) test
unnumbered format placeholders from {} to {0}
Change-Id: If67a3374177ec067573e5504462d257712fafc05
* changed compiler references to Spack's compiler wrapper:spack_cc, spack_cxx, spack_fc
Change-Id: I7ae29c978fff16e37773913f14c84df232499763
* Removed 'single' variant from amdfftw recipe
Instead of conflict for apple-clang + openmp, handled this senario
via below available feature:
depends_on('llvm-openmp', when='%apple-clang +openmp')
Change-Id: I701b23d83e822a500ca3aaf2b60cc9ace09e13dc
* Added relevant info for users who prefers to use single precision
Change-Id: I3506e21da428ddef5fb7895b5aaed32c2a061ef6
* Minor changes on fftw, amdfftw and libflame
amdfftw:
1. Removed escape symbol to the single quotes
2. Rewording the conflict line from Recommended
to Required
fftw:
1. Reorded to following recommended sections:
versions, variants, dependencies, providers,
patches
libflame:
1. Added provides entry for 5.1.0 version
Change-Id: I21ebff99b6dfde031763154693ecb3f1fa47b476
* Removed single quote from amdfftw docstring to fix style failures
Change-Id: Ife939a5a2f5ccbc8879b730c7bebfe2fcfef9332
* Adding AOCC compiler to SPACK community
The AOCC compiler system offers a high level of advanced optimizations, multi-threading and processor support that includes global optimization, vectorization, inter-procedural analyses, loop transformations, and code generation. AMD also provides highly optimized libraries, which extract the optimal performance from each x86 processor core when utilized. The AOCC Compiler Suite simplifies and accelerates development and tuning for x86 applications.
* Added unit tests for detection and flags for AOCC
* Addressed reviewers comments w.r.t version checks and url,checksum related line lengths
Co-authored-by: Test User <spack@example.com>
The YAML config for paths and modules of external packages has
changed: the new format allows a single spec to load multiple
modules. Spack will automatically convert from the old format
when reading the configs (the updates do not add new essential
properties, so this change in Spack is backwards-compatible).
With this update, Spack cannot modify existing configs/environments
without updating them (e.g. “spack config add” will fail if the
configuration is in a format that predates this PR). The user is
prompted to do this explicitly and commands are provided. All
config scopes can be updated at once. Each environment must be
updated one at a time.
* Separate Apple Clang from LLVM Clang
Apple Clang is a compiler of its own. All places
referring to "-apple" suffix have been updated.
* Hack to use a dash in 'apple-clang'
To be able to use autodoc from Sphinx we need
a valid Python name for the module that contains
Apple's Clang code.
* Updated packages to account for the existence of apple-clang
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Added unit test for XCode related functions
Co-authored-by: Gregory Becker <becker33@llnl.gov>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
This commit removes the DYLD_LIBRARY_PATH variable from the default
modules.yaml for darwin. The rationale behind deleting this
environment variable is that paths in this environment variable take
precedence over the default locations of libraries (usually the
install path of the library), which can lead to linking errors in some
circumstances. For example, executables intended to link with Apple's
system BLAS and LAPACK will instead link to a spack-installed
implementation (e.g., OpenBLAS), causing runtime errors.
These errors are resolved by instead relying on paths set in
DYLD_FALLBACK_LIBRARY_PATH, which is lower in precedence than default
locations of libraries.
Spack currently cannot run as a background process uninterrupted because some of the logging functions used in the install method (especially to create the dynamic verbosity toggle with the v key) cause the OS to issue a SIGTTOU to Spack when it's backgrounded.
This PR puts the necessary gatekeeping in place so that Spack doesn't do anything that will cause a signal to stop the process when operating as a background process.
fixes#11555
Every path in CPATH is equivalent to a -I path to the compiler,
while every path in *_INCLUDE_PATH is equivalent to -isystem.
The latter avoids the noise due to warnings coming from 3rd party
libraries that a project depends on.
Added INCLUDE env variable (Intel Fortran, .mod files)
connect_timeout can be used to increase the time Spack waits for the
server to answer. This can be used to work around slow connections or
servers.
Fixes#14700
Fixes#9394Closes#13217.
## Background
Spack provides the ability to enable/disable parallel builds through two options: package `parallel` and configuration `build_jobs`. This PR changes the algorithm to allow multiple, simultaneous processes to coordinate the installation of the same spec (and specs with overlapping dependencies.).
The `parallel` (boolean) property sets the default for its package though the value can be overridden in the `install` method.
Spack's current parallel builds are limited to build tools supporting `jobs` arguments (e.g., `Makefiles`). The number of jobs actually used is calculated as`min(config:build_jobs, # cores, 16)`, which can be overridden in the package or on the command line (i.e., `spack install -j <# jobs>`).
This PR adds support for distributed (single- and multi-node) parallel builds. The goals of this work include improving the efficiency of installing packages with many dependencies and reducing the repetition associated with concurrent installations of (dependency) packages.
## Approach
### File System Locks
Coordination between concurrent installs of overlapping packages to a Spack instance is accomplished through bottom-up dependency DAG processing and file system locks. The runs can be a combination of interactive and batch processes affecting the same file system. Exclusive prefix locks are required to install a package while shared prefix locks are required to check if the package is installed.
Failures are communicated through a separate exclusive prefix failure lock, for concurrent processes, combined with a persistent store, for separate, related build processes. The resulting file contains the failing spec to facilitate manual debugging.
### Priority Queue
Management of dependency builds changed from reliance on recursion to use of a priority queue where the priority of a spec is based on the number of its remaining uninstalled dependencies.
Using a queue required a change to dependency build exception handling with the most visible issue being that the `install` method *must* install something in the prefix. Consequently, packages can no longer get away with an install method consisting of `pass`, for example.
## Caveats
- This still only parallelizes a single-rooted build. Multi-rooted installs (e.g., for environments) are TBD in a future PR.
Tasks:
- [x] Adjust package lock timeout to correspond to value used in the demo
- [x] Adjust database lock timeout to reduce contention on startup of concurrent
`spack install <spec>` calls
- [x] Replace (test) package's `install: pass` methods with file creation since post-install
`sanity_check_prefix` will otherwise error out with `Install failed .. Nothing was installed!`
- [x] Resolve remaining existing test failures
- [x] Respond to alalazo's initial feedback
- [x] Remove `bin/demo-locks.py`
- [x] Add new tests to address new coverage issues
- [x] Replace built-in package's `def install(..): pass` to "install" something
(i.e., only `apple-libunwind`)
- [x] Increase code coverage
Add a configuration option to suppress gpg warnings during binary
package verification. This only suppresses warnings: a gpg failure
will still fail the install. This allows users who have already
explicitly trusted the gpg key they are using to avoid seeing
repeated warnings that it is self-signed.
Add a new entry in `config.yaml`:
config:
shared_linking: 'rpath'
If this variable is set to `rpath` (the default) Spack will set RPATH in ELF binaries. If set to `runpath` it will set RUNPATH.
Details:
* Spack cc wrapper explicitly adds `--disable-new-dtags` when linking
* cc wrapper also strips `--enable-new-dtags` from the compile line
when disabling (and vice versa)
* We specifically do *not* add any dtags flags on macOS, which uses
Mach-O binaries, not ELF, so there's no RUNPATH)
While the build environment already takes share/pkgconfig into account,
the generated module files etc. only consider lib/pkgconfig and
lib64/pkgconfig.
Dotkit is being used only at a few sites and has been deprecated on new
machines. This commit removes all the code that provide support for the
generation of dotkit module files.
A new validator named "deprecatedProperties" has been added to the
jsonschema validators. It permits to prompt a warning message or exit
with an error if a property that has been marked as deprecated is
encountered.
* Removed references to dotkit in the docs
* Removed references to dotkit in setup-env-test.sh
* Added a unit test for the 'deprecatedProperties' schema validator
* When cleaning the stage root, only remove directories that appear
to be used for staging Spack packages. Previously Spack was clearing
all directories in the stage root, which could remove content not
related to Spack if the user chose a staging root which contains
files/directories not managed by Spack.
* The documentation is updated with warnings about choosing a stage
directory that is only managed by Spack (although generally the
check added in this PR for "spack clean" should avoid removing
content that was not created by Spack)
* The default stage directory (in config.yaml) is now
$tempdir/$user/spack-stage and the logic is updated to omit the
$user portion of this path if $tempdir already contains a $user
directory.
* When creating stage root assign user read/write permissions to all
directories in the path under $user. Previously Spack was assigning
the permissions of the first existing parent directory
Fixes#11163
The goal of this work is to simplify stage directory structures by eliminating use of symbolic links. This means, among other things, that` $spack/var/spack/stage` will no longer be the core staging directory. Instead, the first accessible `config:build_stage` path will be used.
Spack will no longer automatically append `spack-stage` (or the like) to configured build stage directories so the onus of distinguishing the directory from other work -- so the other work is not automatically removed with a `spack clean` operation -- falls on the user.
The original packaging, with openfoam as a virtual and with
openfoam-com, openfoam-org and openfoam-extend as
providers, adds an obfuscation layer without any benefit.
- Rename `openfoam-com` to `openfoam`, and remove the
`openfoam` virtual package.
* config:build_jobs now controls the number of parallel jobs to spawn during
builds, but cannot ever exceed the number of cores on the machine.
* The default is set to 16 or the number of available cores, whatever
is lowest.
* Updated docs to reflect the changes done to limit parallel builds
* Add Fujitsu compiler to Spack.
* Fixes for flake8
* Chenges location of FCC to subdirectory called case-insensitive
* Add compiler tests for Fujitsu compiler
* Modify the logic of taking compiler version for new version of Fujitsu compiler
* mesa: re-writen to new meson build system
* xorg-server: Remove unneeded mesa dependency
* glx: provide the virtual GLX package
* Convert most "mesa" dependencies to use virtual gl and glx dependencies
* mesa: Switch to always building from the git repo instead of a tarball
* Use gl and glx version ranges instead of exact versions
* glx: provide a default package
* add auto to swr variant
* Revert "add auto to swr variant"
This reverts commit 2e7cd8a8aca07767c00657d0d09985ddd6306883.
* update mesa package to version 19.0
* set +glx by default only when running on linux
* fix style issues in geant4 package
* remove virtual package "egl"
* add cxxstd variant
* add CMake constraints based on platform/version
* add older versions
* update boost dependency version constraints (which are closely
tied to mysql version) and update boost cxxstd choice to be
the same as the cxxstd chosen for mysql
* add client-only support (including a patch for 5.5.x)
* record the mysql package as a provider of the mysql-client virtual
* mariadb-c-client is a new package using the distinct, LGPL,
MySQL-compatible client library from mariadb.com. It provides the
virtual package mariadb-client
* mariadb is recorded as a provider of the mariadb-client virtual
* The mysql-client virtual package is also added, and mariadb-c-client
is recorded as a provider for it
* Add binary package of the IBM Java SDK for big and little-endian
powerpc (power7, 8 and 9). The jdk and openjdk packages only install
on x86_64.
* Add ibm-java as a java provider
* The jdk and openjdk packages only install on x86_64. Add conflicts
for ppc64 and ppc64le to jdk and openjdk.
* Create option to build missing compilers and add them to config before installing packages that use them
* Clean up kwarg passing for do_install, put compiler bootstrapping in separate method
This spack command adds a new schema for a file which describes the
builder containers available, along with the compilers availabe on
each builder. The release-jobs command then generates the .gitlab-ci.yml
file by first expanding the release spec set, concretizing each spec
(in an appropriate docker container if --this-machine-only argument is
not provided on command line), and then combining and staging all the
concrete specs as jobs to be run by gitlab.
* Remove /nfs/tmp2 from default configuration
* /nfs/tmp2 is going away from LC... and doesn’t exist for the rest of the world.
* update documentation to remove /nfs/tmp2 as well
* Introduce FFTW2 and FFT3 providers for Intel-MKL and FFTW Spack packages.
* make fftw default package for fftw-api virtual package
* virtual package test assertion now provides location of default virtual packages.
* Change name of virtual package to fftw-api and used versioned interface.
* Add a build_language config.yaml option which controls the language
of compiler messages
* build_language defaults to "C", in which case the compiler messages
will be in English. This allows Spack log parsing to detect and
highlight error messages (since the regular expressions to find
error messages are in English)
* The user can use the default language in their environment by setting
the build_language config variable to null or ''
Spack can now be configured to assign permissions to the files installed by a package.
In the `packages.yaml` file under `permissions`, the attributes `read`, `write`, and `group` control the package permissions. These attributes can be set per-package, or for all packages under `all`. If permissions are set under `all` and for a specific package, the package-specific settings take precedence. The `read` and `write` attributes take one of `user`, `group`, and `world`.
packages:
all:
permissions:
write: group
group: spack
my_app:
permissions:
read: group
group: my_team
Fixes#9166
This is intended to reduce errors related to lock timeouts by making
the following changes:
* Improves error reporting when acquiring a lock fails (addressing
#9166) - there is no longer an attempt to release the lock if an
acquire fails
* By default locks taken on individual packages no longer have a
timeout. This allows multiple spack instances to install overlapping
dependency DAGs. For debugging purposes, a timeout can be added by
setting 'package_lock_timeout' in config.yaml
* Reduces the polling frequency when trying to acquire a lock, to
reduce impact in the case where NFS is overtaxed. A simple
adaptive strategy is implemented, which starts with a polling
interval of .1 seconds and quickly increases to .5 seconds
(originally it would poll up to 10^5 times per second).
A test is added to check the polling interval generation logic.
* The timeout for Spack's whole-database lock (e.g. for managing
information about installed packages) is increased from 60s to
120s
* Users can configure the whole-database lock timeout using the
'db_lock_timout' setting in config.yaml
Generally, Spack locks (those created using spack.llnl.util.lock.Lock)
now have no timeout by default
This does not address implementations of NFS that do not support file
locking, or detect cases where services that may be required
(nfslock/statd) aren't running.
Users may want to be able to more-aggressively release locks when
they know they are the only one using their Spack instance, and they
encounter lock errors after a crash (e.g. a remote terminal disconnect
mentioned in #8915).
This commit adds 'libunwind' as the default 'unwind' provider in
spack. This preference should be overridden by the
darwin/packages.yaml file on macOS. Continues the changes discussed in
This commit adds default unwind providers to the default packages.yaml
for darwin. Compiler versions are supplied with the apple-unwind
package so that apple-unwind is only used with Apple's clang fork, and
not with LLVM's clang.
If the user sets "ccache: true" in spack's config.yaml, Spack will use an available
ccache executable when compiling c/c++ code. This feature is disabled by default
(i.e. "ccache: false") and the documentation is updated with how to enable
ccache support
- spack.util.lock behaves the same as llnl.util.lock, but Lock._lock and
Lock._unlock do nothing.
- can be disabled with a control variable.
- configuration options can enable/disable locking:
- `locks` option in spack configuration controls whether Spack will use filesystem locks or not.
- `-l` and `-L` command-line options can force-disable or force-enable locking.
- Spack will check for group- and world-writability before disabling
locks, and it will not allow a group- or world-writable instance to
have locks disabled.
- update documentation
* Add format to separate target and os for path
spec format can now handle separations of target and os for setting
up the path.
* Added ${PLATFORM} et al to spec.format()
${PLATFORM}, ${OS}, ${TARGET}
* Update tests
Updated tests and got rid of unnecessary code.
* Also update documentation to reflect this new ability.
* Add default path scheme to config.yaml
Added default path scheme to config.yaml. Users can overwrite this
section if they want.
This provides options for hardware and software rendering with the
gl API and updates the vtk package to make use of those options:
* Create new "gl" virtual package, provided by mesa
* Add external-only "opengl" package, which represents a system
install that provides gl
* For vtk: prefer system gl implementation by default to get speed
up from hardware rendering. When software rendering is specifically
requested (+osmesa), try to use the llvmpipe approach, as it is
much faster.
* Make qt dependency optional for vtk
* Add basic support for VTK on osx
* qt: Depend on virtual gl package, rather than mesa impl
* Module files now are generated using a template engine refers #2902#3173
jinja2 has been hooked into Spack.
The python module `modules.py` has been splitted into several modules
under the python package `spack/modules`. Unit tests stressing module
file generation have been refactored accordingly.
The module file generator for Lmod has been extended to multi-providers
and deeper hierarchies.
* Improved the support for templates in module files.
Added an entry in `config.yaml` (`template_dirs`) to list all the
directories where Spack could find templates for `jinja2`.
Module file generators have a simple override mechanism to override
template selection ('modules.yaml' beats 'package.py' beats 'default').
* Added jinja2 and MarkupSafe to vendored packages.
* Spec.concretize() sets mutual spec-package references
The correct place to set the mutual references between spec and package
objects at the end of concretization. After a call to concretize we
should now be ensured that spec is the same object as spec.package.spec.
Code in `build_environment.py` that was performing the same operation
has been turned into an assertion to be defensive on the new behavior.
* Improved code and data layout for modules and related tests.
Common fixtures related to module file generation have been extracted
in `conftest.py`. All the mock configurations for module files have been
extracted from python code and have been put into their own yaml file.
Added a `context_property` decorator for the template engine, to make
it easy to define dictionaries out of properties.
The default for `verbose` in `modules.yaml` is now False instead of True.
* Extendable module file contexts + short description from docstring
The contexts that are used in conjunction with `jinja2` templates to
generate module files can now be extended from package.py and
modules.yaml.
Module files generators now infer the short description from package.py
docstring (and as you may expect it's the first paragraph)
* 'module refresh' regenerates all modules by default
`module refresh` without `--module-type` specified tries to
regenerate all known module types. The same holds true for `module rm`
Configure options used at build time are extracted and written into the
module files where possible.
* Fixed python3 compatibility, tests for Lmod and Tcl.
Added test for exceptional paths of execution when generating Lmod
module files.
Fixed a few compatibility issues with python3.
Fixed a bug in Tcl with naming_scheme and autoload + unit tests
* Updated module file tutorial docs. Fixed a few typos in docstrings.
The reference section for module files has been reorganized. The idea is
to have only three topics at the highest level:
- shell support + spack load/unload use/unuse
- module file generation (a.k.a. APIs + modules.yaml)
- module file maintenance (spack module refresh/rm)
Module file generation will cover the entries in modules.yaml
Also:
- Licenses have been updated to include NOTICE and extended to 2017
- docstrings have been reformatted according to Google style
* Removed redundant arguments to RPackage and WafPackage.
All the callbacks in `RPackage` and `WafPackage` that are not build
phases have been modified not to accept a `spec` and a `prefix`
argument. This permits to leverage the common `configure_args` signature
to insert by default the configuration arguments into the generated
module files. I think it's preferable to handling those packages
differently than `AutotoolsPackage`. Besides only one package seems
to override one of these methods.
* Fixed broken indentation + improved resiliency of refresh
Fixed broken indentation in `spack module refresh` (probably a rebase
gone silently wrong?). Filter the writers for blacklisted specs before
searching for name clashes. An error with a single writer will not
stop regeneration, but instead will print a warning and continue
the command.
* Refactor IntelInstaller into IntelPackage base class
* Move license attributes from __init__ to class-level
* Flake8 fixes: remove unused imports
* Fix logic that writes the silent.cfg file
* More specific version numbers for Intel MPI
* Rework logic that selects components to install
* Final changes necessary to get intel package working
* Various updates to intel-parallel-studio
* Add latest version of every Intel package
* Add environment variables for Intel packages
* Update env vars for intel package
* Finalize components for intel-parallel-studio package
Adds a +tbb variant to intel-parallel-studio.
The tbb package was renamed to intel-tbb.
Now both intel-tbb and intel-parallel-studio+tbb
provide tbb.
* Overhaul environment variables set by intel-parallel-studio
* Point dependent packages to the correct MPI wrappers
* Never default to intel-parallel-studio
* Gather env vars by sourcing setup scripts
* Use mpiicc instead of mpicc when using Intel compiler
* Undo change to ARCH
* Add changes from intel-mpi to intel-parallel-studio
* Add comment explaining mpicc vs mpiicc
* Prepend env vars containing 'PATH' or separators
* Flake8 fix
* Fix bugs in from_sourcing_file
* Indentation fix
* Prepend, not set if contains separator
* Fix license symlinking broken by changes to intel-parallel-studio
* Use comments instead of docstrings to document attributes
* Flake8 fixes
* Use a set instead of a list to prevent duplicate components
* Fix MKL and MPI library linking directories
* Remove +all variant from intel-parallel-studio
* It is not possible to build with MKL, GCC, and OpenMP at this time
* Found a workaround for locating GCC libraries
* Typos and variable names
* Fix initialization of empty LibraryList
* Several improvements for the openfoam packages
--
Refactor openfoam packages by adding an OpenfoamArch class
Use separate configure, build, install phases.
Provide FOAM_PROJECT_DIR dependent env for openfoam packages
- easier way to locate
Eliminate intermediate installation directories
- unneeded clutter.
- makes it less than easy to find the etc/bashrc file
Add versioning for all openfoam patches
- no certainty which parts (if any) will be needed in future versions,
especially if we strive to ensure that the upstream version builds
well with spack to begin with.
Support build of develop branches
- helps track build regressions for future openfoam releases
STYLE: use common/ and assets/ to provide additional (build) resources ...
* - adjust OpenFOAM provider
Move openfoam-com up front since this is the one being used as a base
for the others
