Now that Spack injects microarchitecture specific optimizations for
the selected target, packages should avoid adding flags that could
step over those.
This PR adds interproscan-4.8, which has a completely different build
system than version 5. Note that this builds for running on a host as
opposed to a queue system. I am fairly certain that a queue system can
be configured later.
This PR also adds a patch for intrproscan-5 to build when the user
building the packages has a large GID by setting posix mode for tar.
* llvm: fixed issues with syntax and formatting
* use spec.architecture.target.family
* use spec.target instead of spec.architecture.target
* mesa: use == instead of __contains__
A function added to this package ran as part of importing it and
printed a warning for most Spack invocations, this removes the
warning message.
Also:
* Use compilers directly instead of Spack compiler wrappers (since
references to the compiler are embedded in text and binary files
of the installation)
* Add 'cross' variant for setting CROSS environment variable for
build
* Set UPCXX_INSTALL for generated module files
* Set UPCXX_GASNET_CONDUIT/UPCXX_NETWORK in generated module files
on Cray systems
* Also set UPCXX_NETWORK in build environment for Cray systems
The following dependencies were added:
+ depends_on('perl-exporter-tiny', type=('build', 'run'))
+ depends_on('perl-list-moreutils-xs', type=('build', 'run'))
Seamless translation from 'target=<generic>' to either
- target.family == <generic> (in methods)
- 'target=<generic>:' (in directives)
Also updated docs to show ranges in directives.
Fixes#12829
This adds a variant to the util-linux package that controls whether it
builds its own libuuid. Variant defaults to True. It enables other
packages to choose to get libuuid from the libuuid package instead.
This also changes the cryptsetup package to build util-linux with
~libuuid (so it uses an explicitly-Spack-built instance of libuuid
instead).
- add missing perl dependency
- only filter Makefile if referred to dependency is in the spec
- rewrite the shebang line of scripts to use spack perl
- remove tabix dependency as tabix and bgzip are part of htslib
* cuda: New version 10.1.243
Adds CUDA 10.1.243. The installer command-line arguments have slightly
changed, hence in the install method the version needs to be inspected
in order to give the correct arguments for the new installer.
* cuda: Combine common command-line arguments
The CUDA 10.1+ installer has slightly different command-line arguments
than previous versions. Keep the common parts together and only split
where they are different.
* Make flake8 happy
* update py-bokeh: new version & dependencies
* Revert "update py-bokeh: new version & dependencies"
This reverts commit 5e191a0b20a89f09630b4d223a28b19db715603f.
* update py-bokeh: new version & dependencies
* trigger travis-ci
* adjust python dependency-type to br
* update py-bokeh: new version & dependencies
* Revert "update py-bokeh: new version & dependencies"
This reverts commit 5e191a0b20a89f09630b4d223a28b19db715603f.
* new package: py-fsspec: add package.py
* trigger travis-ci
* adjust python dependency-type to br
* CGNS: Add setting of RPATH on Darwin
This should go in the CGNS CMakeLists.txt, but it isn't there yet and won't be in previous versions, so best to handle it here.
If building on darwin/MacOSX, need to set the RPATH so applications can find shared library correctly.
* Restrict MACOSX_RPATH setting
This has now been added to the CGNS distribution, so the setting of `CMAKE_MACOSX_RPATH` should be restricted to current and previous releases and not upcoming releases.
* new package: py-configojb
* add version 4.7.2
* improve dependencies
* fix url for versions > 5.0.0
* Update var/spack/repos/builtin/packages/py-configobj/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-configobj/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* use format to create url strings
* fix typo
* improve style
* Update var/spack/repos/builtin/packages/py-configobj/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* py-gpaw: Fixing missing numpy include path, adding newer version of py-gpaw and fixing a bug with libxc.c in older py-gpaw
* py-gpaw: Fix Python and ASE version dependencies
- GPAW 19.8.1 requires Python 3.x, add dependency on python@3.5:
- GPAW releases are associated with a corresponding ASE release, add
matching ASE version dependencies.
* py-gpaw: Enable the scalapack variant by default
GPAW installation instructions say scalapack is optional but "highly
recommended". Thus enable it by default.
* add new cutadapt release 2.5, and adjust dependencies conditional on version
* use https, not ssh, for git url
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* update py-xopen (add 0.8.2 checksum)
* refine version specific dependencies
add py-bz2file, which needs to be created
* create py-bz2file
* Revert "refine version specific dependencies"
This reverts commit 70649da98851fefb2f936ca99a012fe6bef07b70.
* Revert "update py-xopen (add 0.8.2 checksum)"
This reverts commit 7400f44caa6e98419eb4bc3107704b91e8a2018b.
* update py-xopen (add 0.8.2 checksum)
* refine version specific dependencies
add py-bz2file, which needs to be created
* py-bz2file needed when built with python 2.7
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* space after comma
- Fix trailing whitespace missed by the bug described in #12755.
- Fix other style issues that have crept in over time (this can happen
when flake8 adds new checks with new versions)
There are problems with libunwind for arm and trying to use it with mesa.
See for example:
https://github.com/grate-driver/mesa/issues/6
disabling use of libunwind for arm, allows the package to be built
Signed-off-by: Howard Pritchard <hppritcha@gmail.com>
- Use of symbol testing macro requires explicit include()
- CMake policies are not version-portable and the support has to queried
based on CMake version
* libpeas@1.22.0: new package
* libpeas: note more build dependencies
Build and link dependencies were obtained through a combination of
examining the `config.log` file from `configure` and looking at the
pkg-config files of `libpeas`.
* libpeas: add search path for GIR/typelib files
* Use spec.architecture.target insted of platform.
* remove default in simd variant value.
simd variant change to archtecture independent values.
* Add check simd values.
* rewrite check simd values.
* * flake8
* change aarch64 to arm (neon support only 32 bit arm.)
* py-ase: New version 3.18
Add ASE version 3.18. ASE 3.18 has dropped support for python 2.x,
hence add a dependency on python@3.5: for it.
* Add more ASE dependencies
Address review comments, add dependencies on py-scipy, py-matplotlib,
py-flask, and also add type=('build', 'run') dependency specifiers.
While debugging this package on our Cray machine, tmux was throwing an
error involving the ncurses headers. Tmux would look for headers in
system locations rather than where spack installed ncurses. Tested only
on a Cray.
* Install the newest version of ncbi-rmblastn
Version ncbi-rmblastn 2.2.28 coonfiguration fails for gcc compiler on ubuntu 16.04 due to some compatibility issues that requires manual intervention to keep the installation going. However you still stumble upon other issues while compiling it.
Using Intel compiler passes the configuration step but fails for the compilation process as well.
Here I'm using the latest version and patch, and the recommended configuration option as mention in http://www.repeatmasker.org/RMBlast.html
* uploading ncbi-blast patch
The mariadb-5.5 series can not be compiled with gcc-9.1.0 and above. Add
a conflicts statement to reflect that.
The error is due to -Werror=address-of-packed-member, a warning that is
new in gcc-9.
* Update R CRAN packages
This PR update R CRAN packages. It also ensures that spack built
packages that correspond to R recommended packages are specified in the
dependency list. This is needed for #12015.
* Add more updates to packages
* Updated dependencies of CRAN R packages
Also, use cloud.r-project.org rather than cran.r-project.org to use
automatic redirection to mirrors. This minimizes the load on the cran
server.
* Update to latest versions of CRAN R packages
* Fix flake8 issues
Some blank lines at the end of a coupple of package files crept in.
* Adjust r-animation dependencies
The r-magick package depends on image-magick, so r-animation should as
well. Also, add in texlive for LaTeX support.
* New package: r-magick
* Adjust line spaces in r-magick
* Add swftools dependenct to r-animation
* New package: swftools
This is needed bt r-animation
* Add 'when' clause to some package dependencies
- r-animation
- r-coin
- r-dt
- r-openssl
* New package: r-ellipsis
* New package: r-vctrs
* New package: r-zeallot
* New package: r-generics
* New package: r-cardata
* Add r-progress dependency to r-readxl
* New package: r-askpass
* New package: r-openxlsx
* New package: r-rio
* New package: r-sys
* New package: r-zip
* Add more updated packages
These are updates that have happened while working on this PR as well as
catching the ones from the cran.rstudio.com URL that were missed before.
* New package: r-gower
* New package: r-recipes
* New package: r-squarem
* New package: r-libcoin
* New package: r-rcmdcheck
* New package: r-remotes
* New package: r-sessioninfo
* New package: r-xopen
* New package: r-rgexf
* New package: r-rook
* New package: r-later
* New package: r-promises
* New package: r-xfun
* New package: r-urca
* New package: r-ggsignif
* New package: r-polynom
* New package: r-ucminf
* New package: r-ordinal
* New package: r-inum
* New package: r-debugme
* New package: r-fs
* New package: r-shinyfiles
* New package: r-gsa
* New package: r-nmof
* New package: r-dosnow
* New package: r-rann
* New package: r-reticulate
* New package: r-future
* New package: r-globals
* New package: r-listenv
* New package: r-future-apply
* New package: r-rsvd
* New package: r-sctransform
* New package: r-mitools
* Remove a stray FIXME line
* Fix typo in dependency for r-rcmdcheck
* Remove the dependency on r-splines
The r-splines package never existed in spack, but it does not exist on
CRAN either. There is an archive version from 1999 but it does not have
the proper extension format for modern R packages. The latest version
does not depend on r-splines, and apparently previous versions at least
built without it. Also, bump the required R version.
* Fix typo in r-rcpp dependency
* Fix typos in dependencies
- r-diagrammer
- r-janitor
- r-seurat
Also, bump minimum R version for r-rngtools.
* New package: r-clisymbols
* New package: r-fitdistrplus
* New package: r-gbrd
* New package: r-gh
* New package: r-ini
* New package: r-metap
* New package: r-npsurv
* New package: r-rdpack
* New package: r-snakecase
* New package: r-tinytex
* New package: r-usethis
* Make recommended changes
Made the changes that were recommended in the initial review.
- change cran.rstudio.com to cloud.r-project.org
- change R-project to r-project
- for packages with no listed homepage use the canonical link to the
package page
- for packages with a dependency constraint on R itself, specify the
dependency type
- add `list_url` where missing from package
* New package: r-hdf5r
This is needed for some older versions of r-seurat.
* Set R versions in packages
If the R version is specified in the DESCRIPTION file then set it in the
respective spack package.py file.
* Update var/spack/repos/builtin/packages/r-aer/package.py
Change dependency version of r-car.
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* Set constraint of mlbench dependency of r-adabag
* Set constraint on r-rcpp dependency of r-ape
* Removed "suggested" r-testthat from r-bibtex
* Update var/spack/repos/builtin/packages/r-bindrcpp/package.py
Fix dependency spec of r-bindr in r-bindrcpp.
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/r-blob/package.py
Add r-vctrs version constraint.
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* Remove r-base64enc dependency from r-callr
* Update var/spack/repos/builtin/packages/r-car/package.py
Set constraint on r-cardata dependency.
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* Remove unneeded dependencies from r-clipr
* Add gmake dependency to r-construct
* Set the proper homepage for r-crayon
* Add r-jsonlite as a dependency for r-crul
The jsonlite package moved from "suggests" to "imports" with 0.8.4.
* Remove accidental colon after package name
* Add version constraint to r-fpc dependency in r-dendextend
* Additional constraints for R version with r-digest
* Add r-jsonlite dependency for latest verion of r-dt
* Add r-htmltools dependency in r-dygraphs package
* Removed unneeded dependencies from r-fnn
* Remove unneeded dependencies from r-formatr
* Add version constraint for r-mvtnorm dependency in r-fpc
* Added gmake dependency to r-fs
* Add r-globals dependency in r-future-apply
* Add perl dependency to r-gdata
* Add openssl dependency for r-ggally
* Removed unneeded dependencies from r-globaloptions
* Update r-haven
- Add version constraint on r-forcats
- Add gmake build dependency
* Fixed gmake dependency
Gmake is a build only dependency.
* Apply suggestions from code review
Apply a batch of suggestions from Adam Stewart.
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* Remove unneeded dependencies from r-hoardr
* Fix r-htmlwidgets homepage
* Add gmake build dependency to r-httpuv
* Remove unneeded dependency from r-log4r
* Remove unneeded dependency from r-maldiquant
* Add gmake build dependency to r-minqa
* Remove unneeded dependency from r-mlbench
* Set constraint on R6 dependenvy of r-pbdzmq
* Set constraints on r-callr dependency of r-pkgbuild
* Remove unneeded dependency from r-nloptr
* Remove unneeded dependencies from r-pkgmaker
* Set R version constraint for r-raster
* Set version constraint on rcpp for r-rcppprorgess
* Added gmake build dependency
* Remove unneeded dependencies from r-rematch
* Remove unneeded dependency from r-plogr
* Add gmake build dependency for r-rcurl
* Apply suggestions from code review
Bring in more suggestions from Adam Stewart.
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* Remove cnpy dependency from r-rcppcnpy
The r-rcppcnpy package has its own modified copy of the cnpy source and
will build from that internal source. The cnpy dependency is therefore
unnecessary.
* Add comment to reconcile dependencies
The CRAN site lists Perl, Getopt::Long as a dependency. The Spack Perl
will have the Getopt::Long package installed so just depend on Perl.
* Add dependency on udunits2 with newer versions of r-units
* Set additional proj constraint for r-sf
Support for PROJ6 was added in r-sf-0.7-4.
* New package: pandoc
This package installs the pandoc and pandoc-citeproc binaries in order
to satisfy dependencies on pandoc until the Haskell framework is in
Spack.
* Add pandoc dependency to r-bookdown
* Add comment about MPI in r-ergm
* Add pandoc dependency for r-reprex
* Add proj constraints to r-rgdal dependencies
Support for PROJ6 was added in version 1.4-2.
* Modifications to r-rgl
- Rearranged the dependencies to be more consistent with other packages
- put the type last on the depends_on lines to be consistent with other
packages
- Added version constraints for some dependencies
- Added pandoc build dependency
* Be more accurate with rjsonio constraint for r-rgooglemaps
* Remove unneeded dependencies from r-rhmmer
* Tweak constraints for r-rjava
- Set java version constraint
- add gmake build dependency
* Add pandoc dependency to r-markdown
* Remove unneeded dependencies from r-rrcov
* Tweak r-rstan package
- remove duplicate specifications
- remove unneeded when conditions
- add version constraints
- arrange to follow order on CRAN page more closely
- add gmake build dependency
- add pandoc build dependency
* Add pandoc build dependency for r-rstantools
* Remove unneeded dependency from r-runit
* Remove unneeded dependencies from r-selectr
* Remove example R code from description
The example would module loading to break, at least in the case of Lmod
using TCL module files. It could be during the TCL to Lua conversion but
the module fails due to interpreting ipart of the example as a command.
* Update r-seurat
New version of r-seurat with new dependencies.
* New package: r-dqrng
* New package: r-leiden
* New package: r-rcppannoy
* New package: r-rcppparallel
* New package: r-rspectra
* New package: r-sitmo
* New package: r-uwot
* Remove unneeded dependency from r-snow
* Remove unneeded dependency from r-sourcetools
* Added pandoc build dependency for r-stanheaders
* Remove unneeded dependencies from r-taxizedb
* Remove unneeded dependencies from r-tclust
* Add dependency constraints for r-threejs
The following are needed for version 0.2.2:
- r-matrix
- r-jsonlite
* Remove unneeded dependencies from r-vfs
* Remove unneeded dependencies from r-vgam
* Remove unneeded dependency from r-xlconnectjars
* Remove unneeded dependency from r-xlsxjars
* Remove unneeded dependency from r-xnomial
* Remove ~mpi from fftw dependency of swftools
* Apply suggestions from code review
Add latest round of suggestions from Adam Stewart.
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* Fix rjsonio spec for r-rgooglemaps
The r-rjsonio spec is a when conditional.
* Rename 3 R.* packages
- r-utils --> r-r-utils (R.utils)
- r-oo --> r-r-oo (R.oo)
- r-methodss3 --> r-r-methodss3 (R.methodsS3)
Also, renamed dependencies in packages that depend on these three.
* Loosen version constraint on mariadb for r-rmysql
Make the mariadb constraint on mariadb-5.5 rather than the more
specific, and limiting, mariadb-5.5.56. This will allow an external
mariadb, such as mariadb-5.5.60 on CentOS-7.5 to be used. It also allows
for r-rmysql to be built against newer versions of the mariadb-5.5
series that might be added to spack.
* Convert to Autotools package
* dyninst and papi are now optional (off by default)
* limit dyninst version to < 10 (see
https://github.com/bsc-performance-tools/extrae/issues/30)
* Add numactl dependency
* Enable parallel installs for 3.7 and later
* Set EXTRAE_HOME in module files and for dependent package installs
* Generalize cxx11 support flag (previously it was using a specific
syntax and this updates it to use the cxx11 support flag for the
compiler in use).
* The install for kaldi was copying library symlinks but not the
actual library files, this makes sure to copy the libraries
* All libraries are installed to 'prefix.lib' (the original
library directory structure is no longer maintained)
* The install step for executables did not account for the different
dynamic library suffix on MacOS
e891cc4 updated the cairo package to make gobject support optional
and disabled it by default. gtkplus requires gobject support so this
explicitly enables +gobject on the cairo dependency of gtkplus.
Change the depends_on type from default (build + link) to just 'link'
for binutils and a few other packages. We don't use the binutils
utilities (only libs). On cori at NERSC (Cray), this was breaking the
build by covering up the system ld.
