Python 3 metaclasses have a `__prepare__` method that lets us save the
class's dictionary before it is constructed. In Python 2 we had to walk
up the stack using our `caller_locals()` method to get at this. Using
`__prepare__` is much faster as it doesn't require us to use `inspect`.
This makes multimethods use the faster `__prepare__` method in Python3,
while still using `caller_locals()` in Python 2. We try to reduce the
use of caller locals using caching to speed up Python 2 a little bit.
Our importer was always parsing from source (which is considerably
slower) because the source size recorded in the .pyc file differed from
the size of the input file.
Override path_stats in the prepending importer to fool it into thinking
that the source size is the size *with* the prepended code.
Since the backup file is only created on the first invocation, it will
contain the original file without any modifications. Further invocations
will then read the backup file, effectively reverting prior invocations.
This can be reproduced easily by trying to install likwid, which will
try to install into /usr/local. Work around this by creating a temporary
file to read from.
* This updates stage names to use "spack-stage-" as a prefix.
This avoids removing non-Spack directories in "spack clean" as
c141e99 did (in this case so long as they don't contain the
prefix "spack-stage-"), and also addresses a follow-up issue
where Spack stage directories were not removed.
* Spack now does more-stringent checking of expected permissions for
staging directories. For a given stage root that includes a user
component, all directories before the user component that are
created by Spack are expected to match the permissions of their
parent; the user component and all deeper directories are expected
to be accessible to the user (read/write/execute).
This feature generates a verification manifest for each installed
package and provides a command, "spack verify", which can be used to
compare the current file checksums/permissions with those calculated
at installed time.
Verification includes
* Checksums of files
* File permissions
* Modification time
* File size
Packages installed before this PR will be skipped during verification.
To verify such a package you must reinstall it.
The spack verify command has three modes.
* With the -a,--all option it will check every installed package.
* With the -f,--files option, it will check some specific files,
determine which package they belong to, and confirm that they have
not been changed.
* With the -s,--specs option or by default, it will check some
specific packages that no files havae changed.
fixes#13005
This commit fixes an issue with the name of the root directory for
module file hierarchies. Since #3206 the root folder was named after
the microarchitecture used for the spec, which is too specific and
not backward compatible for lmod hierarchies. Here we compute the
root folder name using the target family instead of the target name
itself and we add target information in the 'whatis' portion of the
module file.
From Python docs:
--
'surrogateescape' will represent any incorrect bytes as code points in
the Unicode Private Use Area ranging from U+DC80 to U+DCFF. These
private code points will then be turned back into the same bytes when
the surrogateescape error handler is used when writing data. This is
useful for processing files in an unknown encoding.
--
This will allow us to process files with unknown encodings.
To accommodate the case of self-extracting bash scripts, filter_file
can now stop filtering text input if a certain marker is found. The
marker must be passed at call time via the "stop_at" function argument.
At that point the file will be reopened in binary mode and copied
verbatim.
* use "surrogateescape" error handling to ignore unknown chars
* permit to stop filtering if a marker is found
* add unit tests for non-ASCII and mixed text/binary files
- Add a test that verifies checksums on all packages
- Also add an attribute to packages that indicates whether they need a
manual download or not, and add an exception in the tests for these
packages until we can verify them.
Both floating-point and NEON are required in all standard ARMv8
implementations. Theoretically though specialized markets can support
no NEON or floating-point at all. Source:
https://developer.arm.com/docs/den0024/latest/aarch64-floating-point-and-neon
On the other hand the base procedure call standard for Aarch64
"assumes the availability of the vector registers for passing
floating-point and SIMD arguments". Further "the Arm 64-bit
architecture defines two mandatory register banks: a general-purpose
register bank which can be used for scalar integer processing and
pointer arithmetic; and a SIMD and Floating-Point register bank".
Source:
https://developer.arm.com/docs/ihi0055/latest/procedure-call-standard-for-the-arm-64-bit-architecture
This makes customization of Aarch64 with no NEON instruction set
available so unlikely that we can consider them a feature of the
generic family.
This PR adds a 'concretize' entry to an environment's spec.yaml file
which controls how user specs are concretized. By default it is
set to 'separately' which means that each spec added by the user is
concretized separately (the behavior of environments before this PR).
If set to 'together', the environment will concretize all of the
added user specs together; this means that all specs and their
dependencies will be consistent with each other (for example, a
user could develop code linked against the set of libraries in the
environment without conflicts).
If the environment was previously concretized, this will re-concretize
all specs, in which case previously-installed specs may no longer be
used by the environment (in this sense, adding a new spec to an
environment with 'concretize: together' can be significantly more
expensive).
The 'concretize: together' setting is not compatible with Spec
matrices; this PR adds a check to look for multiple instances of the
same package added to the environment and fails early when
'concretize: together' is set (to avoid confusing messages about
conflicts later on).
While the build environment already takes share/pkgconfig into account,
the generated module files etc. only consider lib/pkgconfig and
lib64/pkgconfig.
When removing support for dotkit in #11986 the code trying to set the
paths of the various module files was not updated to skip it. This
results in a failure because of a key error after the deprecation
warning is displayed to user.
This commit fixes the issue and adds a unit test for regression.
Note that code for Spack chains has been updated accordingly but
no unit test has been added for that case.
Dotkit is being used only at a few sites and has been deprecated on new
machines. This commit removes all the code that provide support for the
generation of dotkit module files.
A new validator named "deprecatedProperties" has been added to the
jsonschema validators. It permits to prompt a warning message or exit
with an error if a property that has been marked as deprecated is
encountered.
* Removed references to dotkit in the docs
* Removed references to dotkit in setup-env-test.sh
* Added a unit test for the 'deprecatedProperties' schema validator
fixes#12915closes#12916
Since Spack has support for specific targets it might happen that
software is built for targets that are not exactly the host because
it was either an explicit user request or the compiler being used is
too old to support the host.
Modules for different targets are written into different directories
and by default Spack was adding to MODULEPATH only the directory
corresponding to the current host. This PR modifies this behavior to
add all the directories that are **compatible** with the current host.
Sometimes when remove_file is called on a link, that link is missing
(perhaps ctrl-C happened halfway through a previous action). As
removing a non-existent file is no problem, this patch changes the
behavior so Spack continues rather than stopping with an error.
Currently you would see
ValueError: /path/to/dir is not a link tree!
and now it continues with a warning.
bin/spack now needs to have a "-*- python -*-" line after the shebang, so
that emacs will interpret it as a python file instead of as a shell
script. Add one line to the license check limit to accommodate this.
The output of subprocess.check_output is a byte string in Python 3. This causes dictionary lookup to fail later on.
A try-except around this function prevented this error from being noticed. Removed this so that more errors can propagate out.
Preferred targets were failing because we were looking them up by
Microarchitecture object, not by string.
- [x] Add a call to `str()` to fix target lookup.
- [x] Add a test to exercise this part of concretization.
- [x] Add documentation for setting `target` in `packages.yaml`
* microarchitectures: zen starts from x86_64, not from excavator
* Unit tests: fixed a test that is wrong with the new modeling
* microarchitectures: fixed features and inheritance for 15h family
bulldozer doesn't inherit from barcelona (10h) + added xop, lwp and tbm
instruction sets to the 15h family (it distinguish the family from 17h)
Addresses #12804
This PR adds the creation of the remaining (16) templates to ensure we can create them with expected content. The goal is to facilitate catching during testing.
Spack doesn't need `requests`, and neither does `jsonschema`, but
`jsonschema` tries to import it, and it'll succeed if `requests` is on
your machine (which is likely, given how popular it is). This commit
removes the import to improve Spack's startup time a bit.
On a mac with SSD, the import of requests is ~28% of Spack's startup time
when run as `spack --print-shell-vars sh,modules` (.069 / .25 seconds),
which is what `setup-env.sh` runs.
On a Linux cluster where Python is mounted from NFS, this reduces
`setup-env.sh` source time from ~1s to .75s.
Note: This issue will be eliminated if we upgrade to a newer `jsonschema`
(we'd need to drop Python 2.6 for that). See
https://github.com/Julian/jsonschema/pull/388.
