Variants explicitly set in an abstract root spec are considered
as defaults for the package they refer to, and they override
what is in packages.yaml and in package.py. This is relevant
only for multi-valued variants, where a constraint may extend
an already default value.
The code for guessing cpu archtype based on craype modules names got confused,
at least on LLNL RZ prototype systems. In particular a (L) or (D) at the end of a craype-x86-xxx or other
cpu architecture module was geting the logic confused.
With this patch, any white space + remaining characters in the moduel name are removed.
Signed-off-by: Howard Pritchard <howardp@lanl.gov>
There have been a lot of questions and some confusion recently surrounding Spack installation test capabilities so this PR is intended to clean up and refine the documentation for "Checking an installation".
It aims to better distinguish between checks that are performed during an installation (i.e., build-time tests) and those that can be done days and weeks after the software has been installed (i.e., install (or smoke) tests).
When we first merged the ASP-based solver, unit-tests
were run in a Docker container with root permissions
and that was preventing a few tests to succeed.
Since some time though, clingo is tested as a regular
user within Github Actions VMs, so we should start to
run checks again.
In an active concretize environment, support installing one or more
cli specs only if they are already present in the environment. The
`--no-add` option is the default for root specs, but optional for
dependency specs. I.e. if you `spack install <depspec>` in an
environment, the dependency-only spec `depspec` will be added as a
root of the environment before being installed. In addition,
`spack install --no-add <spec>` fails if it does not find an
unambiguous match for `spec`.
Like compilers targets now try to minimize
mismatches, instead of maximizing matches.
Deduction of mismatches is reworked to be
the opposite of a match, since computing
that is faster.
The ASP-based solver can natively manage cases where more than one root spec is given, and is able to concretize all the roots together (ensuring one spec per package at most).
Modifications:
- [x] When concretising together an environment the ASP-based solver calls directly its `solve` method rather than constructing a temporary fake root package.
The loading protocol mandates that the the module we are going
to import needs to be already in sys.modules before its code is
executed, so to prevent unbounded recursions and multiple loading.
Loading a module from file exits early if the module is already
in sys.modules
When installing OneAPI packages as root (e.g. in a container), the
installer places cache files in /var/intel/installercache that
interfere with future Spack installs. This ensures that when
running an installation as a root user that this is removed.
The function we coded in Spack to load Python modules with arbitrary
names from a file seem to have issues with local imports. For
loading hooks though it is unnecessary to use such functions, since
we don't care to bind a custom name to a module nor we have to load
it from an unknown location.
This PR thus modifies spack.hook in the following ways:
- Use __import__ instead of spack.util.imp.load_source (this
addresses #20005)
- Sync module docstring with all the hooks we have
- Avoid using memoization in a module function
- Marked with a leading underscore all the names that are supposed
to stay local
This is as much a question as it is a minor fine-tuning of the docs. I've been known to add things to an environment by editing the `spack.yaml` file directly. When I read the previous version of this sentence, I was afraid that `spack add` was actually doing *two* things, modifying the `spack.yaml` and updating something else that defined the roots of the Environment. A bit of experimentation suggests that editing the `spack.yaml` file is sufficient to change the roots.
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
fixes#22786
Trying to get optimization flags for a specific target from
a compiler may trigger warnings. In the context of constructing
facts for the ASP-based solver we don't want to show these
warnings to the user, so here we simply ignore them.
This isn't a significant issue, but I noticed that the docstring incorrectly references "tty.fail" and I wanted to quickly fix it to reflect the correct command, tty.die. I also wanted to fix the docstrings to not be large clumps, to what @tgamblin suggested after I wrote this - having one line at the top that is a quick summary, and more verbose after that.
This provides initial support for [spack monitor](https://github.com/spack/spack-monitor), a web application that stores information and analysis about Spack installations. Spack can now contact a monitor server and upload analysis -- even after a build is already done.
Specifically, this adds:
- [x] monitor options for `spack install`
- [x] `spack analyze` command
- [x] hook architecture for analyzers
- [x] separate build logs (in addition to the existing combined log)
- [x] docs for spack analyze
- [x] reworked developer docs, with hook docs
- [x] analyzers for:
- [x] config args
- [x] environment variables
- [x] installed files
- [x] libabigail
There is a lot more information in the docs contained in this PR, so consult those for full details on this feature.
Additional tests will be added in a future PR.
In debug mode, processes taking an exclusive lock write out their node name to
the lock file. We were using `getfqdn()` for this, but it seems to produce
inconsistent results when used from within some github actions containers.
We get this error because getfqdn() seems to return a short name in one place
and a fully qualified name in another:
```
File "/home/runner/work/spack/spack/lib/spack/spack/test/llnl/util/lock.py", line 1211, in p1
assert lock.host == self.host
AssertionError: assert 'fv-az290-764....cloudapp.net' == 'fv-az290-764'
- fv-az290-764.internal.cloudapp.net
+ fv-az290-764
!!!!!!!!!!!!!!!!!!!! Interrupted: stopping after 1 failures !!!!!!!!!!!!!!!!!!!!
== 1 failed, 2547 passed, 7 skipped, 22 xfailed, 2 xpassed in 1238.67 seconds ==
```
This seems to stem from https://bugs.python.org/issue5004.
We don't really need to get a fully qualified hostname for debugging, so use
`gethostname()` because its results are more consistent. This seems to fix the
issue.
Signed-off-by: vsoch <vsoch@users.noreply.github.com>
* Clarify stub compiler definition in compilers.yaml
* Update explanation of why stub compiler definition is needed
* Add note about required module definition when using Spack-installed
intel-parallel-studio as intel-compiler
* Add suggestion about updating package config preferences based on
choice of variants when installing intel-parallel-studio to avoid
reinstallation
We remove system paths from search variables like PATH and
from -L options because they may contain many packages and
could interfere with Spack-built packages. External packages
may be installed to prefixes that are not actually system paths
but are still "merged" in the sense that many other packages are
installed there. To avoid conflicts, this PR places all external
packages at the end of search paths.
We set LC_ALL=C to encourage a build process to generate ASCII
output (so our logger daemon can decode it). Most packages
respect this but it appears that intel-oneapi-compilers does
not in some cases (see #22813). This reads the output of the build
process as UTF-8, which still works if the build process respects
LC_ALL=C but also works if the process generates UTF-8 output.
For Python >= 3.7 all files are opened with UTF-8 encoding by
default. Python 2 does not support the encoding argument on
'open', so to support Python 2 the files would have to be
opened in byte mode and explicitly decoded (as a side note,
this would be the only way to handle other encodings without
being informed of them in advance).
* bugfix: fix representation of null in spack_yaml output
Nulls were previously printed differently by `spack config blame config`
and `spack config get config`. Fix this in the `spack_yaml` dumpers.
* bugfix: `spack config blame` should print all lines of config
`spack config blame` was not printing all lines of configuration because
there were no annotations for empty lines in the YAML dump output. Fix
this by removing empty lines.
- Use debugoptimized as default build type, just like RelWithDebInfo for cmake
- Do not strip by default, and add a default_library variant which conveniently support both shared and static
By default, clingo doesn't show any optimization criteria (maximized or
minimized sums) if the set they aggregate is empty. Per the clingo
mailing list, we can get around that by adding, e.g.:
```
#minimize{ 0@2 : #true }.
```
for the 2nd criterion. This forces clingo to print out the criterion but
does not affect the optimization.
This PR adds directives as above for all of our optimization criteria, as
well as facts with descriptions of each criterion,like this:
```
opt_criterion(2, "number of non-default variants")
```
We use facts in `concretize.lp` rather than hard-coding these in `asp.py`
so that the names can be maintained in the same place as the other
optimization criteria.
The now-displayed weights and the names are used to display optimization
output like this:
```console
(spackle):solver> spack solve --show opt zlib
==> Best of 0 answers.
==> Optimization Criteria:
Priority Criterion Value
1 version weight 0
2 number of non-default variants (roots) 0
3 multi-valued variants + preferred providers for roots 0
4 number of non-default variants (non-roots) 0
5 number of non-default providers (non-roots) 0
6 count of non-root multi-valued variants 0
7 compiler matches + number of nodes 1
8 version badness 0
9 non-preferred compilers 0
10 target matches 0
11 non-preferred targets 0
zlib@1.2.11%apple-clang@12.0.0+optimize+pic+shared arch=darwin-catalina-skylake
```
Note that this is all hidden behind a `--show opt` option to `spack
solve`. Optimization weights are no longer shown by default, but you can
at least inspect them and more easily understand what is going on.
- [x] always show optimization criteria in `clingo` output
- [x] add `opt_criterion()` facts for all optimizationc criteria
- [x] make display of opt criteria optional in `spack solve`
- [x] rework how optimization criteria are displayed, and add a `--show opt`
optiong to `spack solve`
CachedCMakePackage is a CMakePackage subclass for using CMake initial
cache. This feature of CMake allows packages to increase reproducibility,
especially between spack builds and manual builds. It also allows
packages to sidestep certain parsing bugs in extremely long cmake
commands, and to avoid system limits on the length of the command line.
Co-authored by: Chris White <white238@llnl.gov>
In the face of two consecutive spaces in the command line, the compiler wrapper would skip all remaining arguments, causing problems building py-scipy with Intel compiler. This PR solves the problem.
* Fixed compiler wrapper in the face of extra spaces between arguments
Co-authored-by: Elizabeth Fischer <elizabeth.fischer@alaska.edu>
Original commit message:
This feature of CMake allows packages to increase reproducibility, especially between
Spack- and manual builds. It also allows packages to sidestep certain parsing bugs in
extremely long ``cmake`` commands, and to avoid system limits on the length of the
command line.
Adding:
Co-authored by: Chris White <white238@llnl.gov>
This reverts commit c4f0a3cf6c.
CachedCMakePackage is a specialized class for packages built using CMake initial cache.
This feature of CMake allows packages to increase reproducibility, especially between
Spack- and manual builds. It also allows packages to sidestep certain parsing bugs in
extremely long ``cmake`` commands, and to avoid system limits on the length of the
command line.
Autoconf before 2.70 will erroneously pass ifx's -loopopt argument to the
linker, requiring all packages to use autoconf 2.70 or newer to use ifx.
This is a hotfix enabling ifx to be used in Spack. Instead of bothering
to upgrade autoconf for every package, we'll just strip out the
problematic flag if we're in `ld` mode.
- [x] Add a conditional to the `cc` wrapper to skip `-loopopt` in `ld`
mode. This can probably be generalized in the future to strip more
things (e.g., via an environment variable we can constrol from
Spack) but it's good enough for now.
- [x] Add a test ensuring that `-loopopt` arguments are stripped in link
mode, but not in compile mode.
Since `lazy_lexicographic_ordering` handles `None` comparison for us, we
don't need to adjust the spec comparators to return empty strings or
other type-specific empty types. We can just leverage the None-awareness
of `lazy_lexicographic_ordering`.
- [x] remove "or ''" from `_cmp_iter` in `Spec`
- [x] remove setting of `self.namespace` to `''` in `MockPackage`
We have been using the `@llnl.util.lang.key_ordering` decorator for specs
and most of their components. This leverages the fact that in Python,
tuple comparison is lexicographic. It allows you to implement a
`_cmp_key` method on your class, and have `__eq__`, `__lt__`, etc.
implemented automatically using that key. For example, you might use
tuple keys to implement comparison, e.g.:
```python
class Widget:
# author implements this
def _cmp_key(self):
return (
self.a,
self.b,
(self.c, self.d),
self.e
)
# operators are generated by @key_ordering
def __eq__(self, other):
return self._cmp_key() == other._cmp_key()
def __lt__(self):
return self._cmp_key() < other._cmp_key()
# etc.
```
The issue there for simple comparators is that we have to bulid the
tuples *and* we have to generate all the values in them up front. When
implementing comparisons for large data structures, this can be costly.
This PR replaces `@key_ordering` with a new decorator,
`@lazy_lexicographic_ordering`. Lazy lexicographic comparison maps the
tuple comparison shown above to generator functions. Instead of comparing
based on pre-constructed tuple keys, users of this decorator can compare
using elements from a generator. So, you'd write:
```python
@lazy_lexicographic_ordering
class Widget:
def _cmp_iter(self):
yield a
yield b
def cd_fun():
yield c
yield d
yield cd_fun
yield e
# operators are added by decorator (but are a bit more complex)
There are no tuples that have to be pre-constructed, and the generator
does not have to complete. Instead of tuples, we simply make functions
that lazily yield what would've been in the tuple. If a yielded value is
a `callable`, the comparison functions will call it and recursively
compar it. The comparator just walks the data structure like you'd expect
it to.
The ``@lazy_lexicographic_ordering`` decorator handles the details of
implementing comparison operators, and the ``Widget`` implementor only
has to worry about writing ``_cmp_iter``, and making sure the elements in
it are also comparable.
Using this PR shaves another 1.5 sec off the runtime of `spack buildcache
list`, and it also speeds up Spec comparison by about 30%. The runtime
improvement comes mostly from *not* calling `hash()` `_cmp_iter()`.
* Make -j flag less exceptional
The -j flag in spack behaves differently from make, ctest, ninja, etc,
because it caps the number of jobs to an arbitrary number 16.
Spack will behave like other tools if `spack install` uses a reasonable
default, and `spack install -j <num>` *overrides* that default.
This will be particularly useful for Spack usage outside of a traditional
HPC context and for HPC centers that encourage users to compile on
login nodes with many cores instead of on compute nodes, which has
become increasingly common as individual nodes have more cores.
This maintains the existing default value of min(num_cpus, 16). However,
as it is right now, Spack does a poor job at determining the number of
cpus on linux, since it doesn't take cgroups into account. This is
particularly problematic when using distributed builds with slurm. This PR
also introduces `spack.util.cpus.cpus_available()` to consolidate
knowledge on determining the number of available cores, and improves
core detection for linux. This should also improve core detection for Docker/
Kubernetes, which also use cgroups.
This commit extends the API of the __call__ method of the
SpackCommand class to permit passing global arguments
like those interposed between the main "spack" command
and the subsequent subcommand.
The functionality is used to fix an issue where running
```spack -e . location -b some_package```
ends up printing the name of the environment instead of
the build directory of the package, because the location arg
parser also stores this value as `arg.env`.
fixes#22294
A combination of the swapping order for global variables and
the fact that most of them are lazily evaluated resulted in
custom install tree not being taken into account if clingo
had to be bootstrapped.
This commit fixes that particular issue, but a broader refactor
may be needed to ensure that similar situations won't affect us
in the future.
Remote buildcache indices need to be stored in a place that does not
require writing to the Spack prefix. Move them from the install_tree to
the misc_cache.
fixes#22565
This change enforces the uniqueness of the version_weight
atom per node(Package) in the DAG. It does so by applying
FTSE and adding an extra layer of indirection with the
possible_version_weight/2 atom.
Before this change it may have happened that for the same
node two different version_weight/2 were in the answer set,
each of which referred to a different spec with the same
version, and their weights would sum up.
This lead to unexpected result like preferring to build a
new version of an external if the external version was
older.
* Make stage use concrete specs from environment
Same as in https://github.com/spack/spack/pull/21642, the idea is that
we want to easily stage a package that fails to build in a complex
environment. Instead of making the user create a spec by hand (basically
transforming all the rules in the environment manifest into a spec,
defying the purpose of the environment...), use the provided spec as a
filter for the already concretized specs. This also speeds up things,
cause we don't have to reconcretize.
* clingo: modify recipe for bootstrapping
Modifications:
- clingo builds with shared Python only if ^python+shared
- avoid building the clingo app for bootstrapping
- don't link to libpython when bootstrapping
* Remove option that breaks on linux
* Give more hints for the current Python
* Disable CLINGO_BUILD_PY_SHARED for bootstrapping
* bootstrapping: try to detect the current python from std library
This is much faster than calling external executables
* Fix compatibility with Python 2.6
* Give hints on which compiler and OS to use when bootstrapping
This change hints which compiler to use for bootstrapping clingo
(either GCC or Apple Clang on MacOS). On Cray platforms it also
hints to build for the frontend system, where software is meant
to be installed.
* Use spec_for_current_python to constrain module requirement
* ASP-based solver: avoid adding values to variants when they're set
fixes#22533fixes#21911
Added a rule that prevents any value to slip in a variant when the
variant is set explicitly. This is relevant for multi-valued variants,
in particular for those that have disjoint sets of values.
* Ensure disjoint sets have a clear semantics for external packages
fixes#22547
SingleFileScope was not able to repopulate its cache before this
change. This was affecting the configuration seen by environments
using clingo bootstrapped from sources, since the bootstrapping
operation involved a few cache invalidation for config files.
This change accounts for platform specific configuration scopes,
like ~/.spack/linux, during bootstrapping. These scopes were
previously not accounted for and that was causing issues e.g.
when searching for compilers.
* Replace URL computation in base IntelOneApiPackage class with
defining URLs in component packages (this is expected to be
simpler for now)
* Add component_dir property that all oneAPI component packages must
define. This property names a directory that should exist after
installation completes (useful for making sure the install was
successful) and also defines the search location for the
component's environment update script.
* Add needed dependencies for components (e.g. intel-oneapi-dnn
requires intel-oneapi-tbb). The compilers provided by
intel-oneapi-compilers need some components under certain
circumstances (e.g. when enabling SYCL support) but these were
omitted since the libraries should only be linked when a
dependent package requests that feature
* Remove individual setup_run_environment implementations and use
IntelOneApiPackage superclass method which sources vars.sh
(located in a subdirectory of component_dir)
* Add documentation for IntelOneApiPackge build system
Co-authored-by: Vasily Danilin <vasily.danilin@yandex.ru>
* unit tests: mark slow tests as "maybeslow"
This commit also removes the "network" marker and
marks every "network" test as "maybeslow". Tests
marked as db are maintained, but they're not slow
anymore.
* GA: require style tests to pass before running unit-tests
* GA: make MacOS unit tests fail fast
* GA: move all unit tests into the same workflow, run style tests as a prerequisite
All the unit tests have been moved into the same workflow so that a single
run of the dorny/paths-filter action can be used to ask for coverage based
on the files that have been changed in a PR. The basic idea is that for PRs
that introduce only changes to packages coverage is not necessary, this
resulting in a faster execution of the tests.
Also, for package only PRs slow unit tests are skipped.
Finally, MacOS and linux unit tests are now conditional on style tests passing
meaning that e.g. we won't waste a MacOS worker if we know that the PR has
flake8 issues.
* Addressed review comments
* Skipping slow tests on MacOS for package only recipes
* QA: make tests on changes correct before merging
In most cases, we want condition_holds(ID) to imply any imposed
constraints associated with the ID. However, the dependency relationship
in Spack is special because it's "extra" conditional -- a dependency
*condition* may hold, but we have decided that externals will not have
dependencies, so we need a way to avoid having imposed constraints appear
for nodes that don't exist.
This introduces a new rule that says that constraints are imposed
*unless* we define `do_not_impose(ID)`. This allows rules like
dependencies, which rely on more than just spec conditions, to cancel
imposed constraints.
We add one special case for this: dependencies of externals.
We only consider test dependencies some of the time. Some packages are
*only* test dependencies. Spack's algorithm was previously generating
dependency conditions that could hold, *even* if there was no potential
dependency type.
- [x] change asp.py so that this can't happen -- we now only generate
dependency types for possible dependencies.
This builds on #20638 by unifying all the places in the concretizer where
things are conditional on specs. Previously, we duplicated a common spec
conditional pattern for dependencies, virtual providers, conflicts, and
externals. That was introduced in #20423 and refined in #20507, and
roughly looked as follows.
Given some directives in a package like:
```python
depends_on("foo@1.0+bar", when="@2.0+variant")
provides("mpi@2:", when="@1.9:")
```
We handled the `@2.0+variant` and `@1.9:` parts by generating generated
`dependency_condition()`, `required_dependency_condition()`, and
`imposed_dependency_condition()` facts to trigger rules like this:
```prolog
dependency_conditions_hold(ID, Parent, Dependency) :-
attr(Name, Arg1) : required_dependency_condition(ID, Name, Arg1);
attr(Name, Arg1, Arg2) : required_dependency_condition(ID, Name, Arg1, Arg2);
attr(Name, Arg1, Arg2, Arg3) : required_dependency_condition(ID, Name, Arg1, Arg2, Arg3);
dependency_condition(ID, Parent, Dependency);
node(Parent).
```
And we handled `foo@1.0+bar` and `mpi@2:` parts ("imposed constraints")
like this:
```prolog
attr(Name, Arg1, Arg2) :-
dependency_conditions_hold(ID, Package, Dependency),
imposed_dependency_condition(ID, Name, Arg1, Arg2).
attr(Name, Arg1, Arg2, Arg3) :-
dependency_conditions_hold(ID, Package, Dependency),
imposed_dependency_condition(ID, Name, Arg1, Arg2, Arg3).
```
These rules were repeated with different input predicates for
requirements (e.g., `required_dependency_condition`) and imposed
constraints (e.g., `imposed_dependency_condition`) throughout
`concretize.lp`. In #20638 it got to be a bit confusing, because we used
the same `dependency_condition_holds` predicate to impose constraints on
conditional dependencies and virtual providers. So, even though the
pattern was repeated, some of the conditional rules were conjoined in a
weird way.
Instead of repeating this pattern everywhere, we now have *one* set of
consolidated rules for conditions:
```prolog
condition_holds(ID) :-
condition(ID);
attr(Name, A1) : condition_requirement(ID, Name, A1);
attr(Name, A1, A2) : condition_requirement(ID, Name, A1, A2);
attr(Name, A1, A2, A3) : condition_requirement(ID, Name, A1, A2, A3).
attr(Name, A1) :- condition_holds(ID), imposed_constraint(ID, Name, A1).
attr(Name, A1, A2) :- condition_holds(ID), imposed_constraint(ID, Name, A1, A2).
attr(Name, A1, A2, A3) :- condition_holds(ID), imposed_constraint(ID, Name, A1, A2, A3).
```
this allows us to use `condition(ID)` and `condition_holds(ID)` to
encapsulate the conditional logic on specs in all the scenarios where we
need it. Instead of defining predicates for the requirements and imposed
constraints, we generate the condition inputs with generic facts, and
define predicates to associate the condition ID with a particular
scenario. So, now, the generated facts for a condition look like this:
```prolog
condition(121).
condition_requirement(121,"node","cairo").
condition_requirement(121,"variant_value","cairo","fc","True").
imposed_constraint(121,"version_satisfies","fontconfig","2.10.91:").
dependency_condition(121,"cairo","fontconfig").
dependency_type(121,"build").
dependency_type(121,"link").
```
The requirements and imposed constraints are generic, and we associate
them with their meaning via the id. Here, `dependency_condition(121,
"cairo", "fontconfig")` tells us that condition 121 has to do with the
dependency of `cairo` on `fontconfig`, and the conditional dependency
rules just become:
```prolog
dependency_holds(Package, Dependency, Type) :-
dependency_condition(ID, Package, Dependency),
dependency_type(ID, Type),
condition_holds(ID).
```
Dependencies, virtuals, conflicts, and externals all now use similar
patterns, and the logic for generating condition facts is common to all
of them on the python side, as well. The more specific routines like
`package_dependencies_rules` just call `self.condition(...)` to get an id
and generate requirements and imposed constraints, then they generate
their extra facts with the returned id, like this:
```python
def package_dependencies_rules(self, pkg, tests):
"""Translate 'depends_on' directives into ASP logic."""
for _, conditions in sorted(pkg.dependencies.items()):
for cond, dep in sorted(conditions.items()):
condition_id = self.condition(cond, dep.spec, pkg.name) # create a condition and get its id
self.gen.fact(fn.dependency_condition( # associate specifics about the dependency w/the id
condition_id, pkg.name, dep.spec.name
))
# etc.
```
- [x] unify generation and logic for conditions
- [x] use unified logic for dependencies
- [x] use unified logic for virtuals
- [x] use unified logic for conflicts
- [x] use unified logic for externals
LocalWords: concretizer mpi attr Arg concretize lp cairo fc fontconfig
LocalWords: virtuals def pkg cond dep fn refactor github py
* Rewrite relative dev_spec paths internally to absolute paths in case of relocation of the environment file
* Test relative paths for dev_path in environments
* Add a --keep-relative flag to spack env create
This ensures that relative paths of develop paths are not expanded to
absolute paths when initializing the environment in a different location
from the spack.yaml init file.
Currently, regardless of a spec being concrete or not, we validate its variants in `spec_clauses` (part of `SpackSolverSetup`).
This PR skips the check if the spec is concrete.
The reason we want to do this is so that the solver setup class (really, `spec_clauses`) can be used for cases when we just want the logic statements / facts (is that what they are called?) and we don't need to re-validate an already concrete spec. We can't change existing concrete specs, and we have to be able to handle them *even if they violate constraints in the current spack*. This happens in practice if we are doing the validation for a spec produced by a different spack install.
Signed-off-by: vsoch <vsoch@users.noreply.github.com>
This pull request will add the ability for a user to add a configuration argument on the fly, on the command line, e.g.,:
```bash
$ spack -c config:install_tree:root:/path/to/config.yaml -c packages:all:compiler:[gcc] list --help
```
The above command doesn't do anything (I'm just getting help for list) but you can imagine having another root of packages, and updating it on the fly for a command (something I'd like to do in the near future!)
I've moved the logic for config_add that used to be in spack/cmd/config.py into spack/config.py proper, and now both the main.py (where spack commands live) and spack/cmd/config.py use these functions. I only needed spack config add, so I didn't move the others. We can move the others if there are also needed in multiple places.
Was getting the following error:
```
$ spack test list
==> Error: issubclass() arg 1 must be a class
```
This PR adds a check in `has_test_method` (in case it is re-used elsewhere such as #22097) and ensures a class is passed to the method from `spack test list`.
This is a workaround for an issue with how "spack install" is invoked from within "spack ci rebuild". The fact that we don't get an exception or even the actual returncode when using the object returned by spack.util.executable.which('spack') to install the target spec means we get no indication of failures about the install command itself. Instead we rely on the subsequent buildcache creation failure to fail the job.
Unlike the other commands of the `R CMD` interface, the `INSTALL` command
will read `Renviron` files. This can potentially break builds of r-
packages, depending on what is set in the `Renviron` file. This PR adds
the `--vanilla` flag to ensure that neither `Rprofile` nor `Renviron` files
are read during Spack builds of r- packages.
This adds a `--path` option to `spack python` that shows the `python`
interpreter that Spack is using.
e.g.:
```console
$ spack python --path
/Users/gamblin2/src/spack/var/spack/environments/default/.spack-env/view/bin/python
```
This is useful for debugging, and we can ask users to run it to
understand what python Spack is picking up via preferences in `bin/spack`
and via the `SPACK_PYTHON` environment variable introduced in #21222.
`spack test list` will show you which *installed* packages can be tested
but it won't show you which packages have tests.
- [x] add `spack test list --all` to show which packages have test methods
- [x] update `has_test_method()` to handle package instances *and*
package classes.
* Improve R package creation
This PR adds the `list_url` attribute to CRAN R packages when using
`spack create`. It also adds the `git` attribute to R Bioconductor
packages upon creation.
* Switch over to using cran/bioc attributes
The cran/bioc entries are set to have the '=' line up with homepage
entry, but homepage does not need to exist in the package file. If it
does not, that could affect the alignment.
* Do not have to split bioc
* Edit R package documentation
Explain Bioconductor packages and add `cran` and `bioc` attributes.
* Update lib/spack/docs/build_systems/rpackage.rst
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Update lib/spack/docs/build_systems/rpackage.rst
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Simplify the cran attribute
The version can be faked so that the cran attribute is simply equal to
the CRAN package name.
* Edit the docs to reflect new `cran` attribute format
* Use the first element of self.versions() for url
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
This allows users to use relative paths for mirrors and repos and other things that may be part of a Spack environment. There are two ways to do it.
1. Relative to the file
```yaml
spack:
repos:
- local_dir/my_repository
```
Which will refer to a repository like this in the directory where `spack.yaml` lives:
```
env/
spack.yaml <-- the config file above
local_dir/
my_repository/ <-- this repository
repo.yaml
packages/
```
2. Relative to the environment
```yaml
spack:
repos:
- $env/local_dir/my_repository
```
Both of these would refer to the same directory, but they differ for included files. For example, if you had this layout:
```
env/
spack.yaml
repository/
includes/
repos.yaml
repository/
```
And this `spack.yaml`:
```yaml
spack:
include: includes/repos.yaml
```
Then, these two `repos.yaml` files are functionally different:
```yaml
repos:
- $env/repository # refers to env/repository/ above
repos:
- repository # refers to env/includes/repository/ above
```
The $env variable will not be evaluated if there is no active environment. This generally means that it should not be used outside of an environment's spack.yaml file. However, if other aspects of your workflow guarantee that there is always an active environment, it may be used in other config scopes.
* Allow the bootstrapping of clingo from sources
Allow python builds with system python as external
for MacOS
* Ensure consistent configuration when bootstrapping clingo
This commit uses context managers to ensure we can
bootstrap clingo using a consistent configuration
regardless of the use case being managed.
* Github actions: test clingo with bootstrapping from sources
* Add command to inspect and clean the bootstrap store
Prevent users to set the install tree root to the bootstrap store
* clingo: documented how to bootstrap from sources
Co-authored-by: Gregory Becker <becker33@llnl.gov>
If a user creates a wrapper for the ifx binary called ifx_orig,
this causes the ifx --version command to produce:
$ ifx --version
ifx_orig (IFORT) 2021.1 Beta 20201113
Copyright (C) 1985-2020 Intel Corporation. All rights reserved.
The regex for ifx currently expects the output to begin with
"ifx (IFORT)..." so the wrapper would not be detected as ifx. This
PR removes the need for the static "ifx" string which allows wrappers
to be detected as ifx.
In general, the Intel compiler regexes do not include the invoked
executable name (i.e., ifort, icc, icx, etc.), so this is not
expected to cause any issues.
* make `spack fetch` work with environments
* previously: `spack fetch` required the explicit statement of
the specs to be fetched, even when in an environment
* now: if there is no spec(s) provided to `spack fetch` we check
if an environment is active and if yes we fetch all
uninstalled specs.
When using an external package with the old concretizer, all
dependencies of that external package were severed. This was not
performed bidirectionally though, so for an external package W with
a dependency on Z, if some other package Y depended on Z, Z could
still pull properties (e.g. compiler) from W since it was not
severed as a parent dependency.
This performs the severing bidirectionally, and adds tests to
confirm expected behavior when using config from DAG-adjacent
packages during concretization.
This allows for quickly configuring a spack install/env to use upstream packages by default. This is particularly important when upstreaming from a set of officially supported spack installs on a production cluster. By configuring such that package preferences match the upstream, you ensure maximal reuse of existing package installations.
Fixes for gitlab pipelines
* Remove accidentally retained testing branch name
* Generate pipeline w/out debug mode
* Make jobs interruptible for auto-cancel pending
* Work around concretization conflicts
* Support clingo when used with cffi
Clingo recently merged in a new Python module option based on cffi.
Compatibility with this module requires a few changes to spack - it does not automatically convert strings/ints/etc to Symbol and clingo.Symbol.string throws on failure.
manually convert str/int to clingo.Symbol types
catch stringify exceptions
add job for clingo-cffi to Spack CI
switch to potassco-vendored wheel for clingo-cffi CI
on_unsat argument when cffi
* Spec.splice feature
Construct a new spec with a dependency swapped out. Currently can only swap dependencies of the same name, and can only apply to concrete specs.
This feature is not yet attached to any install functionality, but will eventually allow us to "rewire" a package to depend on a different set of dependencies.
Docstring is reformatted for git below
Splices dependency "other" into this ("target") Spec, and return the result as a concrete Spec.
If transitive, then other and its dependencies will be extrapolated to a list of Specs and spliced in accordingly.
For example, let there exist a dependency graph as follows:
T
| \
Z<-H
In this example, Spec T depends on H and Z, and H also depends on Z.
Suppose, however, that we wish to use a differently-built H, known as H'. This function will splice in the new H' in one of two ways:
1. transitively, where H' depends on the Z' it was built with, and the new T* also directly depends on this new Z', or
2. intransitively, where the new T* and H' both depend on the original Z.
Since the Spec returned by this splicing function is no longer deployed the same way it was built, any such changes are tracked by setting the build_spec to point to the corresponding dependency from the original Spec.
Co-authored-by: Nathan Hanford <hanford1@llnl.gov>
If you install packages using spack install in an environment with
complex spec constraints, and the install fails, you may want to
test out the build using spack build-env; one issue (particularly
if you use concretize: together) is that it may be hard to pass
the appropriate spec that matches what the environment is
attempting to install.
This updates the build-env command to default to pulling a matching
spec from the environment rather than concretizing what the user
provides on the command line independently.
This makes a similar change to spack cd.
If the user-provided spec matches multiple specs in the environment,
then these commands will now report an error and display all
matching specs (to help the user specify).
Co-authored-by: Gregory Becker <becker33@llnl.gov>
* Improve error message for inconsistencies in package.py
Sometimes directives refer to variants that do not exist.
Make it such that:
1. The name of the variant
2. The name of the package which is supposed to have
such variant
3. The name of the package making this assumption
are all printed in the error message for easier debugging.
* Add unit tests
The signature for configure_args in the template for new
RPackage packages was incorrect (different than what is
defined and used in lib/spack/spack/build_systems/r.py)
See issue #21774
Keep spack.store.store and spack.store.db consistent in unit tests
* Remove calls to monkeypatch for spack.store.store and spack.store.db:
tests that used these called one or the other, which lead to
inconsistencies (the tests passed regardless but were fragile as a
result)
* Fixtures making use of monkeypatch with mock_store now use the
updated use_store function, which sets store.store and store.db
consistently
* subprocess_context.TestState now transfers the serializes and
restores spack.store.store (without the monkeypatch changes this
would have created inconsistencies)
Since signals are fundamentally racy, We can't bound the amount of time
that the `test_foreground_background_output` test will take to get to
'on', we can only observe that it transitions to 'on'. So instead of
using an arbitrary limit, just adjust the test to allow either 'on' or
'off' followed by 'on'.
This should eliminate the spurious errors we see in CI.
Follow-up to #17110
### Before
```bash
CC=/Users/Adam/spack/lib/spack/env/clang/clang; export CC
SPACK_CC=/usr/bin/clang; export SPACK_CC
PATH=...:/Users/Adam/spack/lib/spack/env/apple-clang:/Users/Adam/spack/lib/spack/env/case-insensitive:/Users/Adam/spack/lib/spack/env:...; export PATH
```
### After
```bash
CC=/Users/Adam/spack/lib/spack/env/clang/clang; export CC
SPACK_CC=/usr/bin/clang; export SPACK_CC
PATH=...:/Users/Adam/spack/lib/spack/env/clang:/Users/Adam/spack/lib/spack/env/case-insensitive:/Users/Adam/spack/lib/spack/env:...; export PATH
```
`CC` and `SPACK_CC` were being set correctly, but `PATH` was using the name of the compiler `apple-clang` instead of `clang`. For most packages, since `CC` was set correctly, nothing broke. But for packages using `Makefiles` that set `CC` based on `which clang`, it was using the system compilers instead of the compiler wrappers. Discovered when working on `py-xgboost@0.90`.
An alternative fix would be to copy the symlinks in `env/clang` to `env/apple-clang`. Let me know if you think there's a better way to do this, or to test this.
* sbang pushed back to callers;
star moved to util.lang
* updated unit test
* sbang test moved; local tests pass
Co-authored-by: Nathan Hanford <hanford1@llnl.gov>
fixes#20736
Before this one line fix we were erroneously deducing
that dependency conditions hold even if a package
was external.
This may result in answer sets that contain imposed
conditions on a node without the node being present
in the DAG, hence #20736.
At some point in the past, the skip_patch argument was removed
from the call to package.do_install() this broke the --skip-patch
flag on the dev-build command.
fixes#20679
In this refactor we have a single cardinality rule on the
provider, which triggers a rule transforming a dependency
on a virtual package into a dependency on the provider of
the virtual.
Every other predicate in the concretizer uses a `_set` suffix to
implement user- or package-supplied settings, but compiler settings use a
`_hard` suffix for this. There's no difference in how they're used, so
make the names the same.
- [x] change `node_compiler_hard` to `node_compiler_set`
- [x] change `node_compiler_version_hard` to `node_compiler_version_set`
Previously, the concretizer handled version constraints by comparing all
pairs of constraints and ensuring they satisfied each other. This led to
INCONSISTENT ressults from clingo, due to ambiguous semantics like:
version_constraint_satisfies("mpi", ":1", ":3")
version_constraint_satisfies("mpi", ":3", ":1")
To get around this, we introduce possible (fake) versions for virtuals,
based on their constraints. Essentially, we add any Versions,
VersionRange endpoints, and all such Versions and endpoints from
VersionLists to the constraint. Virtuals will have one of these synthetic
versions "picked" by the solver. This also allows us to remove a special
case from handling of `version_satisfies/3` -- virtuals now work just
like regular packages.
This converts the virtual handling in the new concretizer from
already-ground rules to facts. This is the last thing that needs to be
refactored, and it converts the entire concretizer to just use facts.
The previous way of handling virtuals hinged on rules involving
`single_provider_for` facts that were tied to the virtual and a version
range. The new method uses the condition pattern we've been using for
dependencies, externals, and conflicts.
To handle virtuals as conditions, we impose constraints on "fake" virtual
specs in the logic program. i.e., `version_satisfies("mpi", "2.0:",
"2.0")` is legal whereas before we wouldn't have seen something like
this. Currently, constriants are only handled on versions -- we don't
handle variants or anything else yet, but they key change here is that we
*could*. For a long time, virtual handling in Spack has only dealt with
versions, and we'd like to be able to handle variants as well. We could
easily add an integrity constraint to handle variants like the one we use
for versions.
One issue with the implementation here is that virtual packages don't
actually declare possible versions like regular packages do. To get
around that, we implement an integrity constraint like this:
:- virtual_node(Virtual),
version_satisfies(Virtual, V1), version_satisfies(Virtual, V2),
not version_constraint_satisfies(Virtual, V1, V2).
This requires us to compare every version constraint to every other, both
in program generation and within the concretizer -- so there's a
potentially quadratic evaluation time on virtual constraints because we
don't have a real version to "anchor" things to. We just say that all the
constraints need to agree for the virtual constraint to hold.
We can investigate adding synthetic versions for virtuals in the future,
to speed this up.
