* Update the krell institute products to use the latest features of spack for building on cluster platforms.
* Address travis error messages and resubmit the pull request.
* Update the contents of openspeedshop package.py so it passes the flake8 tests.
* Fix flake8 error-whitespack issue in mrnet package.py file.
* Add updates based on spack reviewer feedback.
* More fixes based on comments from reviewers. Switch using extend to using append, remove additional setting of PATH and LD_LIBRARY_PATH that should not be required due to RPATH.
* More review related changes. Update MPIOption.append lines and take out xercesc references.
* Create a base options function for common openspeedshop base cmake options to reduce redundencies.
* Add libxml2+python depends on to get around issues with the libxml2 package file.
* Using boost over 1.60.0 causes compile errors. This is a known boost bug. Also, dyninst-9.2.0 is set to be the vesrion of dyninst to use with OSS, as of now. The newer version fails to build.
* Fix bad syntax in specifying the boost version range.
* Update the version numbers for the krell institute components and tools: cbtf and openspeedshop.
* Do not build glib for qt3, it is not needed and causes build problems at this time anyway.
* A fix was added for setting LD_LIBRARY_PATH in the qt3 build, but if LD_LIBRARY_PATH is not set the qt build fails. So so check and set LD_LIBRARY_PATH if not set, update if it is set.
* Update the fix for qt3 build by setting LD_LIBRARY_PATH instead of checking for whether it is set or not per Adams comment that spack clears LD_LIBRARY_PATH.
* A fix was added for setting LD_LIBRARY_PATH in the qt3 build, but if LD_LIBRARY_PATH is not set the qt build fails. So so check and set LD_LIBRARY_PATH if not set, update if it is set.
* Trim comments to fit more concisely.
* Fix tabs versus spaces and swap if and else clause check from a negative to a positive check.
* Add ability to build llvm-openmp-ompt alone, with gnu compilers and use the resulting ompt interface in cbtf-krell and openspeedshop to gather openmp specific performance information.
* Fix flake8 errors.
* Fix flake8 errors - stage 2.
* Fixes based on reviewer suggestions and comments.
* Use build_type variant to set the build type and allow changing of the type.
* Fix missing comma in cmake_arg list, found on another test machine.
* r-glmnet: Create New Package.
* pr-quantities: add version & py-numpy conflict (#5307)
* r-glmnet: Update version to 2.0-13
* r-matrix: Update version to 1.2-11
* r-lattice: Update version to 0.20-35.
The default implementation of Package.fetch_remote_versions will take
a URL like https://github.com/google/protobuf/archive/ and automatically
search https://github.com/google/protobuf/releases/ for new package
versions. In the case of protobuf the release/ path contains release
artifacts for a version and the archive/ path contains the desired
source. Since both are associated with the version, and
Package.fetch_remote_versions only stores one URL for a given version,
the two paths are in conflict; previously the URL returned for a
given version was arbitrarily chosen between the two paths. This
updates the definition for the Protobuf package to always search for
URLs in https://github.com/google/protobuf/archive/
* blas_lapack: add multithreading variant
* elemental: update
* intel-mkl: extend to macOS
* rename multithreading to threads
* intel-mkl: avoid long lines
* intel-mkl: make one install error a conflict
* openblas: fix a minor bug in the test
Update the git package to git@2.14.1.
This requires a pcre that has been built with `--enable-jit`, so this
adds a variant to pcre to support that and arranges so that git versions
before 2.14 depend on pcre and git 2.14 and after depend on pcre+jit.
Due to the logic in configure.ac, we may be using both the system
linker (LD_RO='ld -r -o') and the linker tied to the compiler (LD=$CXX).
This may produce weird link-time errors when the two executables are
not the same.
The PR works around the issue disabling 'ld -r'
Open MPI has been relying on versions of PMIx since the 2.0.0
release. Although the embedded version can be used, it makes
more sense long term for Spack to know about the PMIx package,
and to build Open MPI against PMIx as an external package.
There are other software components that may eventually be
reliant on PMIx including MPICH, GASNet, the OpenSHMEM reference
implementation, etc.
This is also partly motivated by the desire to have ECP ST
projects to be released through Spack.
Signed-off-by: Howard Pritchard <howardp@lanl.gov>
* Make texlive untrusted
TeXLive updates their installer without changing its name. We've been
playing keep-up with them, but I'm proposing it's not worth it.
I seem to end up installing it '--no-checksum' anyway.
This commit updates the package to make that approach official,
removing the checksum, adding a note to the description and a bigger
note/comment inthe package body.
* Pull installer from stable source (packages are still *live*)
This pulls the installer script from the "historic" repository. It
appears to be stable, so that we can use a checksum with it (one
hopes, time will tell).
The installer still pulls the packages from the live repos so
installations aren't reproducible.
Add r-biobase package. Remove explicit R dependency from r-biocgenerics
package (since it is an instance of RPackage). Update version for
r-biocgenerics and remove github versions.
* First draft package for sambamba
Depends on the ldc package (#5279) that alalazo's working on.
It requires a patch to the Makefile because one of ldc's library
functions mentions dlopen. I *think* that ldc should be handling
this. See the discusssion in #5279.
It also requires a "static" ldc. Again, see #5279.
Finally, it needs "undeaD" as a resource, but I'm guessing at the
appropriate release. See
https://github.com/lomereiter/sambamba/issues/312.
* alalazo renamed the shared_libs variant, keep up...
+ The recipe for cgns seems to be wrong. CMake complains about variables set but
not used (`HDF5_NEEDS_ZLIB`, `HDF5_NEEDS_MPI` and `HDF5_NEEDS_SZIP`) and fails
to find HDF5.
+ This change set removes these variables from the cmake configure line,
replacing them with `'-DHDF5_DIR=%s' % spec['hdf5'].prefix`
+ cgns also has trouble with parallel make, so I set `parallel = False`.
* fixes#967
* Version bump to 0.9.1
- Bugfixes for spack find
- 0.9.1 can read specs from current develop.
* Don't assume spack is in the path when building docs.
* fixing build issues for gcc on osx
* reverting inadvertent change on develop
* fixing typesetting of bsws description
* very minor update to RTD docs footer to ref github contributors
* Revert "very minor update to RTD docs footer to ref github contributors"
This reverts commit c40d75da7f3b918350a263e7a9ef34df56b7fb01.
* switch fastmath to depend_on arpack_ng; remove arpack/parpack
* Module files now are generated using a template engine refers #2902#3173
jinja2 has been hooked into Spack.
The python module `modules.py` has been splitted into several modules
under the python package `spack/modules`. Unit tests stressing module
file generation have been refactored accordingly.
The module file generator for Lmod has been extended to multi-providers
and deeper hierarchies.
* Improved the support for templates in module files.
Added an entry in `config.yaml` (`template_dirs`) to list all the
directories where Spack could find templates for `jinja2`.
Module file generators have a simple override mechanism to override
template selection ('modules.yaml' beats 'package.py' beats 'default').
* Added jinja2 and MarkupSafe to vendored packages.
* Spec.concretize() sets mutual spec-package references
The correct place to set the mutual references between spec and package
objects at the end of concretization. After a call to concretize we
should now be ensured that spec is the same object as spec.package.spec.
Code in `build_environment.py` that was performing the same operation
has been turned into an assertion to be defensive on the new behavior.
* Improved code and data layout for modules and related tests.
Common fixtures related to module file generation have been extracted
in `conftest.py`. All the mock configurations for module files have been
extracted from python code and have been put into their own yaml file.
Added a `context_property` decorator for the template engine, to make
it easy to define dictionaries out of properties.
The default for `verbose` in `modules.yaml` is now False instead of True.
* Extendable module file contexts + short description from docstring
The contexts that are used in conjunction with `jinja2` templates to
generate module files can now be extended from package.py and
modules.yaml.
Module files generators now infer the short description from package.py
docstring (and as you may expect it's the first paragraph)
* 'module refresh' regenerates all modules by default
`module refresh` without `--module-type` specified tries to
regenerate all known module types. The same holds true for `module rm`
Configure options used at build time are extracted and written into the
module files where possible.
* Fixed python3 compatibility, tests for Lmod and Tcl.
Added test for exceptional paths of execution when generating Lmod
module files.
Fixed a few compatibility issues with python3.
Fixed a bug in Tcl with naming_scheme and autoload + unit tests
* Updated module file tutorial docs. Fixed a few typos in docstrings.
The reference section for module files has been reorganized. The idea is
to have only three topics at the highest level:
- shell support + spack load/unload use/unuse
- module file generation (a.k.a. APIs + modules.yaml)
- module file maintenance (spack module refresh/rm)
Module file generation will cover the entries in modules.yaml
Also:
- Licenses have been updated to include NOTICE and extended to 2017
- docstrings have been reformatted according to Google style
* Removed redundant arguments to RPackage and WafPackage.
All the callbacks in `RPackage` and `WafPackage` that are not build
phases have been modified not to accept a `spec` and a `prefix`
argument. This permits to leverage the common `configure_args` signature
to insert by default the configuration arguments into the generated
module files. I think it's preferable to handling those packages
differently than `AutotoolsPackage`. Besides only one package seems
to override one of these methods.
* Fixed broken indentation + improved resiliency of refresh
Fixed broken indentation in `spack module refresh` (probably a rebase
gone silently wrong?). Filter the writers for blacklisted specs before
searching for name clashes. An error with a single writer will not
stop regeneration, but instead will print a warning and continue
the command.
* Add --with-mpi=spec['mpi'].name at configure step to avoid error when finding 2 MPI implementations
* Improve scorep package with different compilers and mpi providers
Merge work from multiple contributors on the mesa package. This
includes the following changes and decisions:
* Added in mesa +hwrender support
* make +swrender the default selection since this represents a very
common usage case (ie, cluster usage)
* leave ~llvm as the default, since inadvertently building this package
could take a very long time. May need to revisit this assumption in
the future since the performance difference can be quite substantial.
* build libGLESv1+2 and libGL for all variants
* avoid dependence on dri/libdrm when ~hwrender
* disable gallium drivers if none are requested
- '\b' in regular expression needs to be in a raw string (r'\b')
- Regression test that would've caught this was unintentionally disabled
- This fixes the string and the test
Fixes a problem in ymake-filter: The line buffer is currently hardcoded to be
2048 bytes large but some Makefiles contain lines longer than that. This
caused the Makefiles to sometimes not be generated, consequently failing parts
of the build.
