The checksum exception was not detailed enough and not reraised when using cache only, resulting in useless error messages.
Now it dumps the file path, expected
hash, computed hash, and the downloaded file summary.
* Style: black 23, skip magic trailing commas
* isort should use same line length as black
* Fix unused import
* Update version of black used in CI
* Update new packages
* Update new packages
Specs that did not contribute any files to an env view caused a problem
where zip(specs, files grouped by prefix) got "out of sync", causing the
wrong merge map to be passed to a package's `add_files_to_view`, which
specifically caused an issue where *sometimes* bin/python ended up as a
symlink instead of a copy.
One such example is kokkos + kokkos-nvcc-wrapper, as the latter package
only provides the file bin/nvcc_wrapper, which is also added to view by
kokkos, causing kokkos-nvcc-wrapper to contribute 0 files.
The test feels a bit contrived, but it captures the problem... pkg a is
added first and has 0 files to contribute, pkg b adds a single file, and
we check if pkg b receives a merge map (and a does not).
`spack gc` removes build deps of explicitly installed specs, but somehow
if you take one of the specs that `spack gc` would remove, and feed it
to `spack uninstall /<hash>` by hash, it complains about all the
dependents that still rely on it.
This resolves the inconsistency by only following run/link type deps in
spack uninstall.
That way you can finally do `spack uninstall cmake` without having to
remove all packages built with cmake.
Default package requirements might contain
variants that are not defined in each package,
so we shouldn't verify them when emitting facts
for the ASP solver.
Account for group when enforcing requirements
packages:all : don't emit facts for requirement conditions
that can't apply to current spec
#35098 added the correct extraction of toolset version for the MSVC
compiler. This updates the associated method in MSBuilder to retrieve
the (now correct) property.
This PR enables the successful execution of the spack binary cache
tutorial on Windows. It assumes gnupg and file are available (they
can be installed with choco).
* Fix handling of args with quotes in spack.bat
* `file` utility can be installed on Windows (e.g. with choco): update
error message accordingly
At least with ZSH, prefix inspections containing `./bin` result in a
`$PREFIX/./bin` and result in strange `$PATH` handling.
I.e., `module load git` will prepend `/path/to/git/./bin`, `which git`
will find the right executable, but `git --version` will print the
system one. Normalize the relative path to avoid this behavior.
See also spack/spack#31867.
fixes#34879
This commit adds a new maintainer directive,
which by default extend the list of maintainers
for a given package.
The directive is backward compatible with the current
practice of having a "maintainers" list declared at
the class level.
Move the relocation of binary text in its own class
Drop threaded text replacement, since the current bottleneck
is decompression. It would be better to parallellize over packages,
instead of over files per package.
A small improvement with separate classes for text replacement is that we
now compile the regex in the constructor; previously it was compiled per
binary to be relocated.
This commit makes explicit the format version of the spec file
we are reading from.
Before there were different functions capable of reading some
part of the spec file at multiple format versions. The decision
was implicit, since checks were based on the structure of the
JSON without ever checking a format version number.
The refactor makes also explicit which spec file format is used
by which database and lockfile format, since the information is
stored in global mappings.
To ensure we don't change the hash of old specs, JSON representations
of specs have been added as data. A unit tests checks that we read
the correct hash in, and that the hash stays the same when we
re-serialize the spec using the most recent format version.
Co-authored-by: Harmen Stoppels <me@harmenstoppels.nl>
Currently we print "sha256 checksum failed for [file]. Expected X but
got Y".
This PR extends that message with file size and contents info:
"... but got Y. File size = 123456 bytes. Contents = b'abc...def'"
That way we can immediately see if the file was downloaded only
partially, or if we downloaded a text page instead of a binary, etc.
Co-authored-by: Massimiliano Culpo <massimiliano.culpo@gmail.com>
When running unit-test the test/ci.py module is leaving
garbage (help.sh, test.sh files) in the current working
directory.
This commit changes the current working directory to a
temporary path before those files are created.
* environments: don't rewrite relative view path, expand path on cli ahead of time
Currently if you have a spack.yaml that specifies a view by relative
path, Spack expands it to an absolute path on `spack -e . install` and
persists that to disk.
This is rather annoying when you have a `spack.yaml` file inside a git
repo, cause you want to use relative paths to make it relocatable, but
you constantly have to undo the changes made to spack.yaml by Spack.
So, as an alternative:
1. Always stick to paths as they are provided in spack.yaml, never
replace them with a canonicalized version
2. Turn relative paths on the command line into absolute paths before
storing to spack.yaml. This way you can do `spack env create --dir
./env --with-view ./view` and both `./env` and `./view` are resolved
to the current working dir, as expected (not `./env/view`). This
corresponds to the old behavior of `spack env create`.
* create --with-view always takes a value
All packages with explicit Windows support can be found with
`spack list --tags=windows`.
This also removes the documentation which explicitly lists
supported packages on Windows (which is currently out of date and
is now unnecessary with the added tags).
Note that if a package does not appear in this list, it *may*
still build on Windows, but it likely means that no explicit
attempt has been made to support it.
Since SPACK_PACKAGE_IDS is now also "namespaced" with <prefix>, it makes
more sense to call the flag `--make-prefix` and alias the old flag
`--make-target-prefix` to it.
Normally when using external packages in concretization, Spack ignores
all dependencies of the external. #33777 updated this logic to attach
a Python Spec to external Python extensions (most py-* packages), but
as implemented there were a couple issues:
* this did not account for concretization groups and could generate
multiple different python specs for a single DAG
* in some cases this created a fake Python spec with insufficient
details to be usable (concretization/installation of the
extension would fail)
This PR addresses both of these issues:
* For environment specs that are concretized together, external python
extensions in those specs will all be assigned the same Python spec
* If Spack needs to "invent" a Python spec, then it will have all the
needed details (e.g. compiler/architecture)
With the new variable [prefix/]SPACK_PACKAGE_IDS you can conveniently execute
things after each successful install.
For example push just-built packages to a buildcache
```
SPACK ?= spack
export SPACK_COLOR = always
MAKEFLAGS += -Orecurse
MY_BUILDCACHE := $(CURDIR)/cache
.PHONY: all clean
all: push
ifeq (,$(filter clean,$(MAKECMDGOALS)))
include env.mk
endif
# the relevant part: push has *all* example/push/<pkg identifier> as prereqs
push: $(addprefix example/push/,$(example/SPACK_PACKAGE_IDS))
$(SPACK) -e . buildcache update-index --directory $(MY_BUILDCACHE)
$(info Pushed everything, yay!)
# and each example/push/<pkg identifier> has the install target as prereq,
# and the body can use target local $(HASH) and $(SPEC) variables to do
# things, such as pushing to a build cache
example/push/%: example/install/%
@mkdir -p $(dir $@)
$(SPACK) -e . buildcache create --allow-root --only=package --unsigned --directory $(MY_BUILDCACHE) /$(HASH) # push $(SPEC)
@touch $@
spack.lock: spack.yaml
$(SPACK) -e . concretize -f
env.mk: spack.lock
$(SPACK) -e . env depfile -o $@ --make-target-prefix example
clean:
rm -rf spack.lock env.mk example/
``
In the past we checked remote binary mirrors for existence of a spec
before attempting to download it. That changed to only checking local
copies of index.jsons (if available) to prioritize certain mirrors where
we expect to find a tarball. That was faster for CI since fetching
index.json and loading it just to order mirrors takes more time than
just attempting to fetch tarballs -- and also if we have a direct hit
there's no point to look at other mirrors.
Long story short: the info message only makes sense in the old version
of Spack, so it's better to remove it.
* Forward lookup of "test_log_file" and "test_failures"
refers #34531closes#34487fixes#34440
* Add unit test
* py-libensemble: fix tests
* Support stand-alone tests with cached files as install-time tests
Co-authored-by: Tamara Dahlgren <dahlgren1@llnl.gov>
Ensure `spack mirror add <name> <url/path>` without further arguments translates to `<name>: <url>` key value pairs in mirrors.yaml. If --s3-* flags are provided, only store the provided ones.
Co-authored-by: Harmen Stoppels <me@harmenstoppels.nl>
