This PR supports the creation of securely signed binaries built from spack
develop as well as release branches and tags. Specifically:
- remove internal pr mirror url generation logic in favor of buildcache destination
on command line
- with a single mirror url specified in the spack.yaml, this makes it clearer where
binaries from various pipelines are pushed
- designate some tags as reserved: ['public', 'protected', 'notary']
- these tags are stripped from all jobs by default and provisioned internally
based on pipeline type
- update gitlab ci yaml to include pipelines on more protected branches than just
develop (so include releases and tags)
- binaries from all protected pipelines are pushed into mirrors including the
branch name so releases, tags, and develop binaries are kept separate
- update rebuild jobs running on protected pipelines to run on special runners
provisioned with an intermediate signing key
- protected rebuild jobs no longer use "SPACK_SIGNING_KEY" env var to
obtain signing key (in fact, final signing key is nowhere available to rebuild jobs)
- these intermediate signatures are verified at the end of each pipeline by a new
signing job to ensure binaries were produced by a protected pipeline
- optionallly schedule a signing/notary job at the end of the pipeline to sign all
packges in the mirror
- add signing-job-attributes to gitlab-ci section of spack environment to allow
configuration
- signing job runs on special runner (separate from protected rebuild runners)
provisioned with public intermediate key and secret signing key
Old concrete specs were slipping through in `_assign_hash`, and `package_hash` was
attempting to recompute a package hash when we could not know the package a time
of concretization.
Part of this was that the logic for `_assign_hash` was hard to understand -- it was
called twice from `_finalize_concretization` and had special cases for both args it
was called with. It's much easier to understand the logic here if we just inline it.
- [x] Get rid of `_assign_hash` and just integrate it with `_finalize_concretization`
- [x] Don't call `_package_hash` at all for already-concrete specs.
- [x] Add regression test.
Use `spack build` as build dir to avoid recursive link error.
```
config.status: linking /var/folders/fy/x2xtwh1n7fn0_0q2kk29xkv9vvmbqb/T/s3j/spack-stage/spack-stage-sed-4.8-wraqsot6ofzvr3vrgusx4mj4mya5xfux/spack-src/GNUmakefile to GNUmakefile
config.status: executing depfiles commands
config.status: executing po-directories commands
config.status: creating po/POTFILES
config.status: creating po/Makefile
==> sed: Executing phase: 'build'
==> [2022-05-25-14:15:51.310333] 'make' '-j8' 'V=1'
make: GNUmakefile: Too many levels of symbolic links
make: stat: GNUmakefile: Too many levels of symbolic links
make: *** No rule to make target `GNUmakefile'. Stop.
```
This PR introduces a new build cache layout and package format, with improvements for
both efficiency and security.
## Old Format
Currently a binary package consists of a `spec.json` file at the root and a `.spack` file,
which is a `tar` archive containing a copy of the `spec.json` format, possibly a detached
signature (`.asc`) file, and a tar-gzip compressed archive containing the install tree.
```
build_cache/
# metadata (for indexing)
<arch>-<compiler>-<name>-<ver>-24zvipcqgg2wyjpvdq2ajy5jnm564hen.spec.json
<arch>/
<compiler>/
<name>-<ver>/
# tar archive
<arch>-<compiler>-<name>-<ver>-24zvipcqgg2wyjpvdq2ajy5jnm564hen.spack
# tar archive contents:
# metadata (contains sha256 of internal .tar.gz)
<arch>-<compiler>-<name>-<ver>-24zvipcqgg2wyjpvdq2ajy5jnm564hen.spec.json
# signature
<arch>-<compiler>-<name>-<ver>-24zvipcqgg2wyjpvdq2ajy5jnm564hen.spec.json.asc
# tar.gz-compressed prefix
<arch>-<compiler>-<name>-<ver>-24zvipcqgg2wyjpvdq2ajy5jnm564hen.tar.gz
```
After this change, the nesting has been removed so that the `.spack` file is the
compressed archive of the install tree. Now signed binary packages, will take the
form of a clearsigned `spec.json` file (a `spec.json.sig`) at the root, while unsigned
binary packages will contain a `spec.json` at the root.
## New Format
```
build_cache/
# metadata (for indexing, contains sha256 of .spack file)
<arch>-<compiler>-<name>-<ver>-24zvipcqgg2wyjpvdq2ajy5jnm564hen.spec.json
# clearsigned spec.json metadata
<arch>-<compiler>-<name>-<ver>-24zvipcqgg2wyjpvdq2ajy5jnm564hen.spec.json.sig
<arch>/
<compiler>/
<name>-<ver>/
# tar.gz-compressed prefix (may support more compression formats later)
<arch>-<compiler>-<name>-<ver>-24zvipcqgg2wyjpvdq2ajy5jnm564hen.spack
```
## Benefits
The major benefit of this change is that the signatures on binary packages can be
verified without:
1. Having to download the tarball, or
2. having to extract an unknown tarball.
(1) is an improvement in efficiency; (2) is a security fix: we now ensure that we trust the
binary before we try to run it through `tar`, which avoids potential attacks.
## Backward compatibility
Also after this change, spack should still be able to handle the previous buildcache
structure and binary mirrors with mixed layouts.
This PR builds on #28392 by adding a convenience command to create a local mirror that can be used to bootstrap Spack. This is to overcome the inconvenience in setting up this mirror manually, which has been reported when trying to setup Spack on air-gapped systems.
Using this PR the user can create a bootstrapping mirror, on a machine with internet access, by:
% spack bootstrap mirror --binary-packages /opt/bootstrap
==> Adding "clingo-bootstrap@spack+python %apple-clang target=x86_64" and dependencies to the mirror at /opt/bootstrap/local-mirror
==> Adding "gnupg@2.3: %apple-clang target=x86_64" and dependencies to the mirror at /opt/bootstrap/local-mirror
==> Adding "patchelf@0.13.1:0.13.99 %apple-clang target=x86_64" and dependencies to the mirror at /opt/bootstrap/local-mirror
==> Adding binary packages from "https://github.com/alalazo/spack-bootstrap-mirrors/releases/download/v0.1-rc.2/bootstrap-buildcache.tar.gz" to the mirror at /opt/bootstrap/local-mirror
To register the mirror on the platform where it's supposed to be used run the following command(s):
% spack bootstrap add --trust local-sources /opt/bootstrap/metadata/sources
% spack bootstrap add --trust local-binaries /opt/bootstrap/metadata/binaries
The mirror has to be moved over to the air-gapped system, and registered using the commands shown at prompt. The command has options to:
1. Add pre-built binaries downloaded from Github (default is not to add them)
2. Add development dependencies for Spack (currently the Python packages needed to use spack style)
* bootstrap: refactor bootstrap.yaml to move sources metadata out
* bootstrap: allow adding/removing custom bootstrapping sources
This operation can be performed from the command line since
new subcommands have been added to `spack bootstrap`
* Add --trust argument to spack bootstrap add
* Add a command to generate a local mirror for bootstrapping
* Add a unit test for mirror creation
* Allow Kokkos with OpenMPTarget backend
* Restrict SYCL and OpenMPTarget to C++17 or higher
* Improve C++ standard check for SYCL and OpenMPTarget
* Fix indentation
Currently, environments can either be concretized fully together or fully separately. This works well for users who create environments for interoperable software and can use `concretizer:unify:true`. It does not allow environments with conflicting software to be concretized for maximal interoperability.
The primary use-case for this is facilities providing system software. Facilities provide multiple MPI implementations, but all software built against a given MPI ought to be interoperable.
This PR adds a concretization option `concretizer:unify:when_possible`. When this option is used, Spack will concretize specs in the environment separately, but will optimize for minimal differences in overlapping packages.
* Add a level of indirection to root specs
This commit introduce the "literal" atom, which comes with
a few different "arities". The unary "literal" contains an
integer that id the ID of a spec literal. Other "literals"
contain information on the requests made by literal ID. For
instance zlib@1.2.11 generates the following facts:
literal(0,"root","zlib").
literal(0,"node","zlib").
literal(0,"node_version_satisfies","zlib","1.2.11").
This should help with solving large environments "together
where possible" since later literals can be now solved
together in batches.
* Add a mechanism to relax the number of literals being solved
* Modify spack solve to display the new criteria
Since the new criteria is above all the build criteria,
we need to modify the way we display the output.
Originally done by Greg in #27964 and cherry-picked
to this branch by the co-author of the commit.
Co-authored-by: Massimiliano Culpo <massimiliano.culpo@gmail.com>
* Inject reusable specs into the solve
Instead of coupling the PyclingoDriver() object with
spack.config, inject the concrete specs that can be
reused.
A method level function takes care of reading from
the store and the buildcache.
* spack solve: show output of multi-rounds
* add tests for best-effort coconcretization
* Enforce having at least a literal being solved
Co-authored-by: Greg Becker <becker33@llnl.gov>
* Py-x21 now works, needs dependencies
Conflicts:
var/spack/repos/rit-rc/packages/py-x21/package.py
* Added dependencies to py-x21
* Making flake style check happy
* [py-x21] flake8
* [py-x21]
- added homepage
- added placeholder description
- added comment about checksums
* [py-x21] added darwin support and fixed issue with python 3.7 wheel name
* [py-x21] adding checksum hash
* [py-x21] removed duplicate py-pynacl
* [py-x21]
- updated description
- updated version listing to have a different version for each version
of python. Also, versions dependent on sys.platform
- updated url_for_version to not require post concretized information so
that spack checksum works
* [py-x21] isort
Co-authored-by: vehrc <vehrc@rit.edu>
Previously the regex was only checking for presence of quotes as a beginning
or end character and not a matching set. This erroneously identified the
following *single* argument as being quoted:
source bashenvfile &> /dev/null && python3 -c "import os, json; print(json.dumps(dict(os.environ)))"
rocm-5.1.0 removed librocrand.so from ROCM_DIR/rocrand/lib location (but includes are still at this location)
/opt/rocm-5.0.2/lib/librocrand.so
/opt/rocm-5.0.2/rocrand/lib/librocrand.so
/opt/rocm-5.1.0/lib/librocrand.so
drwxr-xr-x 2 root root 617 Mar 8 08:20 /opt/rocm-5.0.2/rocrand/include
drwxr-xr-x 2 root root 617 Mar 31 09:48 /opt/rocm-5.1.0/rocrand/include
Add a config option to strip `-Werror*` or `-Werror=*` from compile lines everywhere.
```yaml
config:
keep_werror: false
```
By default, we strip all `-Werror` arguments out of compile lines, to avoid unwanted
failures when upgrading compilers. You can re-enable `-Werror` in your builds if
you really want to, with either:
```yaml
config:
keep_werror: all
```
or to keep *just* specific `-Werror=XXX` args:
```yaml
config:
keep_werror: specific
```
This should make swapping in newer versions of compilers much smoother when
maintainers have decided to enable `-Werror` by default.
Parse error information is kept for specs, but it doesn't seem like we propagate it
to the user when we encounter an error. This fixes that.
e.g., for this error in a package:
```python
depends_on("python@:3.8", when="0.900:")
```
Before, with no context and no clue that it's even from a particular spec:
```
==> Error: Unexpected token: ':'
```
With this PR:
```
==> Error: Unexpected token: ':'
Encountered when parsing spec:
0.900:
^
```
