The logic in `config.py` merges lists correctly so that list elements
from higher-precedence config files come first, but the way we merge
`dict` elements reverses the precedence.
Since `mirrors.yaml` relies on `OrderedDict` for precedence, this bug
causes mirrors in lower-precedence config scopes to be checked before
higher-precedence scopes.
We should probably convert `mirrors.yaml` to use a list at some point,
but in the meantie here's a fix for `OrderedDict`.
- [x] ensuring that keys are ordered correctly in `OrderedDict` by
re-inserting keys from the destination `dict` after adding the keys from
the source `dict`.
- [x] also simplify the logic in `merge_yaml` by always reinserting
common keys -- this preserves mark information without all the special
cases, and makes it simpler to preserve insertion order.
Assuming a default spack configuration, if we run this:
```console
$ spack mirror add foo https://bar.com
```
Results before this change:
```console
$ spack config blame mirrors
--- mirrors:
/Users/gamblin2/src/spack/etc/spack/defaults/mirrors.yaml:2 spack-public: https://spack-llnl-mirror.s3-us-west-2.amazonaws.com/
/Users/gamblin2/.spack/mirrors.yaml:2 foo: https://bar.com
```
Results after:
```console
$ spack config blame mirrors
--- mirrors:
/Users/gamblin2/.spack/mirrors.yaml:2 foo: https://bar.com
/Users/gamblin2/src/spack/etc/spack/defaults/mirrors.yaml:2 spack-public: https://spack-llnl-mirror.s3-us-west-2.amazonaws.com/
```
Shell integration no longer requires setting `SPACK_ROOT`, so we can
simplify the documentation on it. The docs on shell support and using
packages are getting a bit old, and information on `spack load` (which
seems to be everyone's most common way of using packages) is hard to
find.
This PR simplifies the shell documentation to remove SPACK_ROOT, and also
moves some sections around for clearer organization.
- [x] make docs on sourcing setup scripts clearer and simpler
- [x] introduce `spack load` early in the basic usage guide instead of
burying it in the module docs
- [x] clean up module docs so that spack module tcl loads comes later
- [x] be clear about the different ways to use packages so that the users
can find the docs better.
Co-authored-by: Massimiliano Culpo <massimiliano.culpo@gmail.com>
fixes#19476
Module file content is written to file in a
temporary location and read back to be analyzed
by unit tests.
The approach to patch "open" and write to a
StringIO in memory has been abandoned, since
over time other operations insisting on the
filesystem have been added to the module file
generator.
Synchronization on GitHub macOS runners seems to be very slow, and
frequently the foreground/background tests fail due to the race this
causes. This increases the tolerance for slowness a bit more, to allow up
to 4 spurious output lines in the tests.
This should hopefully result in no more false negatives on these tests
for macOS on GitHub.
* Add recipe for qgraf
* Revert "Add recipe for qgraf"
This reverts commit 76783f73867a32b4a96e980e31a433ed3c0037fd.
* Add qgraf
* Update package.py
Changes from review
* Changes from MR
* Fix for URLs containing @ symbol
Co-authored-by: Ivan Razumov <ivan.razumov@cern.ch>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Adding AOCC compiler to SPACK community
The AOCC compiler system offers a high level of advanced optimizations, multi-threading and processor support that includes global optimization, vectorization, inter-procedural analyses, loop transformations, and code generation. AMD also provides highly optimized libraries, which extract the optimal performance from each x86 processor core when utilized. The AOCC Compiler Suite simplifies and accelerates development and tuning for x86 applications.
* Added unit tests for detection and flags for AOCC
* Addressed reviewers comments w.r.t version checks and url,checksum related line lengths
Co-authored-by: Test User <spack@example.com>
* ADD: testing to dev-build command
* RM: mutally exclusive group for testing in parser
* FIX: test option to subparser and not testing
* ADD: spack-completion.bash
* RM: local devbuildcosmo cmd
* FIX: bad merge --drop-in -b --before options forgotten
* FIX: --test place in spack-completion.bash
* FIX: typo
* FIX: blank line removing
* FIX: trailing white space
Co-authored-by: Elsa Germann <egermann@tsa-ln002.cm.cluster>
The package list at https://spack.readthedocs.io/en/latest/package_list.html claims "it is automatically generated based on the packages in the latest Spack release" but it is actually based on the develop branch. This leads to confusion when users find that e.g. herwigpp is included in the list, but it cannot be found when they install the latest release. That latest release has a package list at https://spack.readthedocs.io/en/stable/package_list.html which does indeed not include herwigpp.
Changing the language from "the latest Spack release" to "this Spack version" might make that clearer. Maybe.
* Add nvhpc compiler definition: "spack compiler add" will now look
for instances of the NVIDIA HPC SDK compiler executables
(nvc, nvc++, nvfortran) in supplied paths
* Add the nvhpc package which installs the nvhpc compiler
* Add testing for nvhpc detection and C++-standard/pic flags
Co-authored-by: Scott McMillan <smcmillan@nvidia.com>
Output was, e.g. `Executables in /bin and /,u,s,r,/,b,i,n are both associated with the same spec xz@5.2.2`, will be `Executables in /bin and /usr/bin are both associated with the same spec xz@5.2.2`.
Previously config.guess and config.sub were patched only
in the root of the source path.
This modification extend the previous behavior to patch every
config.guess or config.sub file even in subfolders, if need be.
Co-authored-by: Massimiliano Culpo <massimiliano.culpo@gmail.com>
* allow environments to specify dev-build packages
* spack develop and spack undevelop commands
* never pull dev-build packges from bincache
* reinstall dev_specs when code has changed; reinstall dependents too
* preserve dev info paths and versions in concretization as special variant
* move install overwrite transaction into installer
* move dev-build argument handling to package.do_install
now that specs are dev-aware, package.do_install can add
necessary args (keep_stage=True, use_cache=False) to dev
builds. This simplifies driving logic in cmd and env._install
* allow 'any' as wildcard for variants
* spec: allow anonymous dependencies
raise an error when constraining by or normalizing an anonymous dep
refactor concretize_develop to remove dev_build variant
refactor tests to check for ^dev_path=any instead of +dev_build
* fix variant class hierarchy
* autotools: add attribute to delete libtool archives .la files
According to Autotools Mythbuster (https://autotools.io/libtool/lafiles.html)
libtool archive files are mostly vestigial, but they might create issues
when relocating binary packages as shown in #18694.
For GCC specifically, most distributions remove these files with
explicit commands:
https://git.stg.centos.org/rpms/gcc/blob/master/f/gcc.spec#_1303
Considered all of that, this commit adds an easy way for each
AutotoolsPackage to remove every .la file that has been installed.
The default, for the time being, is to maintain them - to be consistent
with what Spack was doing previously.
* autotools: delete libtool archive files by default
Following review this commit changes the default for
libtool archive files deletion and adds test to verify
the behavior.
This commit refactors the computation of the search path
for aclocal in its own method, so that it's easier to reuse
for packages that need to have a custom autoreconf phase.
Co-authored-by: Toyohisa Kameyama <kameyama@riken.jp>
This reverts #18359 and follow-on PRs intended to address issues with
#18359 because that PR changes the hash of all specs. A future PR will
reintroduce the changes.
* Revert "Fix location in spec.yaml where we look for full_hash (#19132)"
* Revert "Fix fetch of spec.yaml files from buildcache (#19101)"
* Revert "Merge pull request #18359 from scottwittenburg/add-binary-distribution-cache-manager"
When we attempt to determine whether a remote spec (in a binary mirror)
is up-to-date or needs to be rebuilt, we compare the full_hash stored in
the remote spec.yaml file against the full_hash computed from the local
concrete spec. Since the full_hash moved into the spec (and is no longer
at the top level of the spec.yaml), we need to look there for it. This
oversight from #18359 was causing all specs to get rebuilt when the
full_hash wasn't fouhd at the expected location.
This changes makes sure that when we run the pipeline job that updates
the buildcache package index on the remote mirror, we also update the
key index. The public keys corresponding to the signing keys used to
sign the package was pushed to the mirror as a part of creating the
buildcache index, so this is just ensuring those keys are reflected
in the key index.
Also, this change makes sure the "spack buildcache update-index"
job runs even when there may have been pipeline failures, since we
would like the index always to reflect the true state of the mirror.
Since those files currently exist in buildcaches (in S3 buckets) with
potentially different content types, we should be less restrictive in
what content types we accept when attempting to fetch them. This PR
removes the content type constraint so any file with the matching
name will be found.
* Remove duplication of reconstructed RPATHs caused by multiple
identical entries in prefixes dictionary
* Don't rewrite RPATHs if relative RPATHs are unchanged because the
directory layout is unchanged
* Need to check the binary is not a Mach-o binary in a linux package or an ELF binary in a macOS package.
* use sys.platform
* Darwin -> darwin for sys.platform
* Rework spack.util.web.list_url()
list_url() now accepts an optional recursive argument (default: False)
for controlling whether to only return files within the prefix url or to
return all files whose path starts with the prefix url. Allows for the
most effecient implementation for the given prefix url scheme. For
example, only recursive queries are supported for S3 prefixes, so the
returned list is trimmed down if recursive == False, but the native
search is returned as-is when recursive == True. Suitable
implementations for each case are also used for file system URLs.
* Switch to using an explicit index for public keys
Switches to maintaining a build cache's keys under build_cache/_pgp.
Within this directory is an index.json file listing all the available
keys and a <fingerprint>.pub file for each such key.
- Adds spack.binary_distribution.generate_key_index()
- (re)generates a build cache's key index
- Modifies spack.binary_distribution.build_tarball()
- if tarball is signed, automatically pushes the key used for signing
along with the tarball
- if regenerate_index == True, automatically (re)generates the build
cache's key index along with the build cache's package index; as in
spack.binary_distribution.generate_key_index()
- Modifies spack.binary_distribution.get_keys()
- a build cache's key index is now used instead of programmatic
listing
- Adds spack.binary_distribution.push_keys()
- publishes keys from Spack's keyring to a given list of mirrors
- Adds new spack subcommand: spack gpg publish
- publishes keys from Spack's keyring to a given list of mirrors
- Modifies spack.util.gpg.Gpg.signing_keys()
- Accepts optional positional arguments for filtering the set of keys
returned
- Adds spack.util.gpg.Gpg.public_keys()
- As spack.util.gpg.Gpg.signing_keys(), except public keys are
returned
- Modifies spack.util.gpg.Gpg.export_keys()
- Fixes an issue where GnuPG would prompt for user input if trying to
overwrite an existing file
- Modifies spack.util.gpg.Gpg.untrust()
- Fixes an issue where GnuPG would fail for input that were not key
fingerprints
- Modifies spack.util.web.url_exists()
- Fixes an issue where url_exists() would throw instead of returning
False
* rework gpg module/fix error with very long GNUPGHOME dir
* add a shim for functools.cached_property
* handle permission denied error in gpg util
* fix tests/make gpgconf optional if no socket dir is available
Update pipelines documentation to describe how 'tags', 'variables',
'image', 'before_script', 'script', and 'after_script' can be
supplied at the top level, to be used by any of the runner mappings,
and also overridden by any of the runner mappings.
Also show an example of capturing the custom spack SHA at pipeline
generation time, so all jobs are sure to run with the same version
of spack, as a means to illustrate the $env:VARIABLE_NAME syntax.
* Use the config path instead of the basename
* Removing unused variables
Co-authored-by: Greg Becker <becker33@llnl.gov>
* Test
Making sure if there are 2 include config files with the same basename they are both implemented
* Edit test assert
Co-authored-by: Greg Becker <becker33@llnl.gov>
Fixes#18441
When writing an environment, there are cases where the lock file for
the environment may be removed. In this case there was a period
between removing the lock file and writing the new manifest file
where an exception could leave the manifest in its old state (in
which case the lock and manifest would be out of sync).
This adds a context manager which is used to restore the prior lock
file state in cases where the manifest file cannot be written.
This is a special case of overriding since each section is being matched with the current spec.
The trailing ':' for sections with override is now removed when parsing the configuration so the special handling for the modules configuration stopped working but it went unnoticed.
`spack install --yes-to-all` doesn't actually make the build non-interactive,
but that is why people typically use it. This documents that you must also
specify `--no-checksum` for a fully non-interactive build.
* Modules: Deduplicate suffixes but don't sort them.
The suffixes' order is defined by the order in which they appear in the configuration file.
* Modules: Modify tests to use spack_yaml.load_config.
spack_yaml.load_config ensures that the configuration is stored in an ordered manner. Without this change, the behavior of the tests did not match Spack's.
* Modules: Tweak the suffixes test to better catch ordering issues.
* spack config: default modification scope can be an environment
The previous model was that environments are the highest priority config
scope for config reading operations, but were not considered for config
writing operations. Now, the active environment is the highest priority
config scope for both reading and writing operations.
Now spack config add, spack external find and spack compiler set environment
configuration in the environment by default if an environment is active. This is a
change in default behavior for these routines, but better matches the mental
model for an environment taking precedence over the user's default config file.
* add scope argument to 'spack external find' to choose non-default scope
* Increase testing for config modifications on environments
Co-authored-by: Gregory Becker <becker33@llnl.gov>
The 'external_modules' attribute on a Spec, when read from a YAML
configuration file, may contain extra formatting that is lost when
that Spec is written-to/read-from JSON format. This was resulting in
a hashing instability (when the Spec was read back, it would report a
different hash). This commit adds a function which removes the extra
formatting from 'external_modules' as it is passed to the Spec in
__init__ to ensure a consistent hash.
As detailed in https://bugs.python.org/issue33725, starting new
processes with 'fork' on Mac OS is not guaranteed to work in general.
As of Python 3.8 the default process spawning mechanism was changed
to avoid this issue.
Spack depends on the fork-based method to preserve file descriptors
transparently, to preserve global state, and to avoid pickling some
objects. An effort is underway to remove dependence on fork-based
process spawning (see #18205). In the meantime, this allows Spack to
run with Python 3.8 on Mac OS by explicitly choosing to use 'fork'.
Co-authored-by: Peter Josef Scheibel <scheibel1@llnl.gov>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Todd Gamblin <tgamblin@llnl.gov>
I know that it's just an example, but I was trying to figure out what was going on and it wasn't making sense....
`tput sgr0` resets the terminal state (http://linuxcommand.org/lc3_adv_tput.php) and I can't see any reason to do it twice. Deleting the second occurrence doesn't seem to break the fancy prompt effect.
Compilers can have strange versions, as the version is provided by the user. We know the real version internally, (by querying the compiler) so expose it as a property and use it in places we don't trust the user. Eventually we'll refactor this with compilers as dependencies, but this is the best fix we've got for now.
- [x] Make `real_version` a property and cache the version returned by the compiler
- [x] Use `real_version` to make C++ language level flags work
Restores the fetching progress bar sans failure outputs; restores non-debug reporting of using fetch cache for installed packages; and adds a unit test.
* Add status bar check to test and fetch output when already installed
Some of the feature flags are named differently and clwb is missing on
my i7-1065G7. cascadelake and cannonlake might have similar problems but
I do not have access to those architectures to test.
* make_package_relative: relocate rpaths on cray
* relocate_package: relocate rpaths on cray
* platforms: add `binary_formats` property
We need to know which binary formats are supported on a platform so we
know which types of relocations to try. This adds a list of binary
formats to the platform and removes a bunch of special cases from
`binary_distribution.py`.
Co-authored-by: Todd Gamblin <tgamblin@llnl.gov>
Before this PR, packages.yaml files that contained an
empty "paths" or "modules" attribute were not updated
correctly, since the update function was not reporting
them as changed after the update.
This PR fixes that issue and adds a unit test to
avoid regression.
This commit adds output to the "spack external find"
command to inform users of the result of the operation.
It also fixes a bug introduced in #17804 due to the fact
that a function was not updated to conform to the new
packages.yaml format (_get_predefined_externals).
* Handle uninstalled rootspecs in buildcache
- Do not parse specs / find matching specs when in an environment and no
package string is provided
- Error only when a spec.yaml or spec string are not installed. In an
environment it is fine when the root spec does not exist.
- When iterating through the matched specs, simply skip uninstalled
packages
* Run Python2.6 unit tests on Github Actions
* Skip url tests on Python 2.6 to reduce waiting times
* Skip foreground background tests on Python 2.6 to reduce waiting times
* Removed references to Travis in the documentation
* Deleted install_patchelf.sh (can be installed from repo on CentOS 6)
* Buildcache:
* Try mocking an install of quux, corge and garply using prebuilt binaries
* Put patchelf install after ccache restore
* Add script to install patchelf from source so it can be used on Ubuntu:Trusty which does not have a patchelf pat package. The script will skip building on macOS
* Remove mirror at end of bindist test
* Add patchelf to Ubuntu build env
* Revert mock patchelf package to allow other tests to run.
* Remove depends_on('patchelf', type='build') relying instead on
* Test fixture to ensure patchelf is available.
* Call g++ command to build libraries directly during test build
* Flake8
* Install patchelf in before_install stage using apt unless on Trusty where a build is done.
* Add some symbolic links between packages
* Flake8
* Flake8:
* Update mock packages to write their own source files
* Create the stage because spec search does not create it any longer
* updates after change of list command arguments
* cleanup after merge
* flake8
- [x] Remove references to `master` branch
- [x] Document how release branches are structured
- [x] Document how to make a major release
- [x] Document how to make a point release
- [x] Document how to do work in our release projects
* Move flake8 tests on Github Actions
* Move shell test to Github Actions
* Moved documentation build to Github Action
* Don't run coverage on Python 2.6
Since we get connection errors consistently on Travis
when trying to upload coverage results for Python 2.6,
avoid computing coverage entirely to speed-up tests.
`spack -V` stopped working when we added the `releases/latest` tag to
track the most recent release. It started just reporting the version,
even on a `develop` checkout. We need to tell it to *only* search for
tags that start with `v`, so that it will ignore `releases/latest`.
`spack -V` also would print out unwanted git eror output on a shallow
clone.
- [x] add `--match 'v*'` to `git describe` arguments
- [x] route error output to `os.devnull`
`spack buildcache list` was trying to construct an `Arch` object and
compare it to `arch_for_spec(<spec>)`. for each spec in the buildcache.
`Arch` objects are only intended to be constructed for the machine they
describe. The `ArchSpec` object (part of the `Spec`) is the descriptor
that lets us talk about architectures anywhere.
- [x] Modify `spack buildcache list` and `spack buildcache install` to
filter with `Spec` matching instead of using `Arch`.
- [x] Make it easier to get a `Spec` with a proper `ArchSpec` from an
`Arch` object via new `Arch.to_spec()` method.
- [x] Pull `spack.architecture.default_arch()` out of
`spack.architecture.sys_type()` so we can get an `Arch` instead of
a string.
* Loosen Axom's variants, add shared variant for axom, fix clang/xlf rpath'ing problem on blueos
* Fix flake8
* Add main branch to list of known git branches
The modifications in 193e8333fa
introduced a bug in the loading of compiler modules, since a
function that was expecting a list of string was just getting
a string.
This commit fixes the bug and adds an assertion to verify the
prerequisite of the function.
Packages can implement “detect_version” to support detection
of external instances of a package. This is generally easier
than implementing “determine_spec_details”. The API for
determine_version is similar: for example you can return
“None” to indicate that an executable is not an instance
of a package.
Users may implement a “determine_variants” method for a package.
When doing external detection, executables are grouped by version
and each group results in a single invocation of “determine_variants”
for the associated spec. The method returns a string specifying
the variants for the package. The method may additionally return
a dictionary representing extra attributes for the package.
These will be stored in the spec yaml and can be retrieved
from self.spec.extra_attributes
The Spack GCC package has been updated with an implementation
of “determine_variants” which adds the following extra
attributes to the package: c, cxx, fortran
The YAML config for paths and modules of external packages has
changed: the new format allows a single spec to load multiple
modules. Spack will automatically convert from the old format
when reading the configs (the updates do not add new essential
properties, so this change in Spack is backwards-compatible).
With this update, Spack cannot modify existing configs/environments
without updating them (e.g. “spack config add” will fail if the
configuration is in a format that predates this PR). The user is
prompted to do this explicitly and commands are provided. All
config scopes can be updated at once. Each environment must be
updated one at a time.
`spack -V` stopped working when we added the `releases/latest` tag to
track the most recent release. It started just reporting the version,
even on a `develop` checkout. We need to tell it to *only* search for
tags that start with `v`, so that it will ignore `releases/latest`.
`spack -V` also would print out unwanted git eror output on a shallow
clone.
- [x] add `--match 'v*'` to `git describe` arguments
- [x] route error output to `os.devnull`
`spack buildcache list` was trying to construct an `Arch` object and
compare it to `arch_for_spec(<spec>)`. for each spec in the buildcache.
`Arch` objects are only intended to be constructed for the machine they
describe. The `ArchSpec` object (part of the `Spec`) is the descriptor
that lets us talk about architectures anywhere.
- [x] Modify `spack buildcache list` and `spack buildcache install` to
filter with `Spec` matching instead of using `Arch`.
- [x] Make it easier to get a `Spec` with a proper `ArchSpec` from an
`Arch` object via new `Arch.to_spec()` method.
- [x] Pull `spack.architecture.default_arch()` out of
`spack.architecture.sys_type()` so we can get an `Arch` instead of
a string.
* Run Python2.6 unit tests on Github Actions
* Skip url tests on Python 2.6 to reduce waiting times
* Skip foreground background tests on Python 2.6 to reduce waiting times
* Removed references to Travis in the documentation
* Deleted install_patchelf.sh (can be installed from repo on CentOS 6)
Relative paths in views have been broken since #17608 or earlier.
- [x] Fix by passing base path of the environment into the `ViewDescriptor`.
Relative paths are calculated from this path.
Relative paths in views have been broken since #17608 or earlier.
- [x] Fix by passing base path of the environment into the `ViewDescriptor`.
Relative paths are calculated from this path.
A bug was introduced in #13100 where ChildErrors would be redundantly
printed when raised during a build. We should eventually revisit error
handling in builds and figure out what the right separation of
responsibilities is for distributed builds, but for now just skip
printing.
- [x] SpackErrors were designed to be printed by the forked process, not
by the parent, so check if they've already been printed.
- [x] update tests
A bug was introduced in #13100 where ChildErrors would be redundantly
printed when raised during a build. We should eventually revisit error
handling in builds and figure out what the right separation of
responsibilities is for distributed builds, but for now just skip
printing.
- [x] SpackErrors were designed to be printed by the forked process, not
by the parent, so check if they've already been printed.
- [x] update tests
Fixes#17299
Cray Shasta systems appear to use an unmodified Sles or other Linux operating system on the backend (like Cray "Cluster" systems and unlike Cray "XC40" systems that use CNL).
This updates the CNL version detection to properly note that this is the underlying OS instead of CNL and delegate to LinuxDistro.
* environment-views: fix bug where missing recipe/repo breaks env commands
When a recipe or a repo has been removed from Spack and an environment
is active, it causes the view activation to crash Spack before any
commands can be executed. Further, the error message it not at all clear
in explaining the issue.
This forces view regeneration to always start from scratch to avoid the
missing package recipes, and defaults add_view=False in main for views activated
by the `spack -e` option.
* add messages to env status and deactivate
Warn users that a view may be corrupt when deactivating an environment
or checking its status while active. Updated message for activate.
* tests for view checking
Co-authored-by: Gregory Becker <becker33@llnl.gov>
* switch from bool to int debug levels
* Added debug options and changed lock logging to use more detailed values
* Limit installer and timestamp PIDs to standard debug output
* Reduced verbosity of fetch/stage/install output, changing most to debug level 1
* Combine lock log methods; change build process install to debug
* Changed binary cache install messages to extraction messages
* bugfix: make compiler preferences slightly saner
This fixes two issues with the way we currently select compilers.
If multiple compilers have the same "id" (os/arch/compiler/version), we
currently prefer them by picking this one with the most supported
languages. This can have some surprising effects:
* If you have no `gfortran` but you have `gfortran-8`, you can detect
`clang` that has no configured C compiler -- just `f77` and `f90`. This
happens frequently on macOS with homebrew. The bug is due to some
kludginess about the way we detect mixed `clang`/`gfortran`.
* We can prefer suffixed versions of compilers to non-suffixed versions,
which means we may select `clang-gpu` over `clang` at LLNL. But,
`clang-gpu` is not actually clang, and it can break builds. We should
prefer `clang` if it's available.
- [x] prefer compilers that have C compilers and prefer no name variation
to variation.
* tests: add test for which()
Apple's gcc is really clang. We previously ignored it by default but
there was a regression in #17110.
Originally we checked for all clang versions with this, but I know of
none other than `gcc` on macos that actually do this, so limiting to
`apple-clang` should be ok.
- [x] Fix check for `apple-clang` in `gcc.py` to use version detection
from `spack.compilers.apple_clang`
The `spack-build-env.txt` file may contains many secrets, but the obvious one is the private signing key in `SPACK_SIGNING_KEY`. This file is nonetheless uploaded as a build artifact to gitlab. For anyone running CI on a public version of Gitlab this is a major security problem. Even for private Gitlab instances it can be very problematic.
Co-authored-by: Scott Wittenburg <scott.wittenburg@kitware.com>
Fixes#17299
Cray Shasta systems appear to use an unmodified Sles or other Linux operating system on the backend (like Cray "Cluster" systems and unlike Cray "XC40" systems that use CNL).
This updates the CNL version detection to properly note that this is the underlying OS instead of CNL and delegate to LinuxDistro.
* environment-views: fix bug where missing recipe/repo breaks env commands
When a recipe or a repo has been removed from Spack and an environment
is active, it causes the view activation to crash Spack before any
commands can be executed. Further, the error message it not at all clear
in explaining the issue.
This forces view regeneration to always start from scratch to avoid the
missing package recipes, and defaults add_view=False in main for views activated
by the `spack -e` option.
* add messages to env status and deactivate
Warn users that a view may be corrupt when deactivating an environment
or checking its status while active. Updated message for activate.
* tests for view checking
Co-authored-by: Gregory Becker <becker33@llnl.gov>
* switch from bool to int debug levels
* Added debug options and changed lock logging to use more detailed values
* Limit installer and timestamp PIDs to standard debug output
* Reduced verbosity of fetch/stage/install output, changing most to debug level 1
* Combine lock log methods; change build process install to debug
* Changed binary cache install messages to extraction messages
* bugfix: make compiler preferences slightly saner
This fixes two issues with the way we currently select compilers.
If multiple compilers have the same "id" (os/arch/compiler/version), we
currently prefer them by picking this one with the most supported
languages. This can have some surprising effects:
* If you have no `gfortran` but you have `gfortran-8`, you can detect
`clang` that has no configured C compiler -- just `f77` and `f90`. This
happens frequently on macOS with homebrew. The bug is due to some
kludginess about the way we detect mixed `clang`/`gfortran`.
* We can prefer suffixed versions of compilers to non-suffixed versions,
which means we may select `clang-gpu` over `clang` at LLNL. But,
`clang-gpu` is not actually clang, and it can break builds. We should
prefer `clang` if it's available.
- [x] prefer compilers that have C compilers and prefer no name variation
to variation.
* tests: add test for which()
Apple's gcc is really clang. We previously ignored it by default but
there was a regression in #17110.
Originally we checked for all clang versions with this, but I know of
none other than `gcc` on macos that actually do this, so limiting to
`apple-clang` should be ok.
- [x] Fix check for `apple-clang` in `gcc.py` to use version detection
from `spack.compilers.apple_clang`
Spack did not support usage of the `--config-scope` option in
combination with an environment: In `lib/spack/spack/main.py`,
`spack.config.command_line_scopes` is set equal to any config scopes
passed by the `--config-scope` option. However, this is done after
activating an environment. In the process of activating an environment,
the `spack.config.config` singleton is instantiated, so later setting of
`spack.config.command_line_scopes` is ignored.
This commit sets command line scopes before activating an environment to
ensure that they are included in the configuration.
Co-authored-by: Tim Fuller <tjfulle@sandia.gov>
The `spack-build-env.txt` file may contains many secrets, but the obvious one is the private signing key in `SPACK_SIGNING_KEY`. This file is nonetheless uploaded as a build artifact to gitlab. For anyone running CI on a public version of Gitlab this is a major security problem. Even for private Gitlab instances it can be very problematic.
Co-authored-by: Scott Wittenburg <scott.wittenburg@kitware.com>
For normal users, `-o` or `--no-same-owner` (GNU extension) is
the default behavior, but for the root user, `tar` attempts to preserve
the ownership from the tarball.
This makes `tar` use `-o` all the time. This should improve untarring
files owned by users not available in rootless Docker builds.
The error message was not updated when the behavior of Spack environments
was changed to not automatically activate the local environment in #17258.
The previous error message no longer makes sense.
When Spack installs a package, it stores repository package.py files
for it and all of its dependencies - any package with a Spack metadata
directory in its installation prefix.
It turns out this was too broad: this ends up including external
packages installed by Spack (e.g. installed by another Spack instance).
Currently Spack doesn't store the namespace properly for such packages,
so even though the package file could be fetched from the external,
Spack is unable to locate it.
This commit avoids the issue by skipping any attempt to locate and copy
from the package repository of externals, regardless of whether they
have a Spack repo directory.
Spack was attempting to calculate abspath on the located config.guess
path even when it was not found (None); this commit skips the abspath
calculation when config.guess is not found.
The error message was not updated when the behavior of Spack environments
was changed to not automatically activate the local environment in #17258.
The previous error message no longer makes sense.
When Spack installs a package, it stores repository package.py files
for it and all of its dependencies - any package with a Spack metadata
directory in its installation prefix.
It turns out this was too broad: this ends up including external
packages installed by Spack (e.g. installed by another Spack instance).
Currently Spack doesn't store the namespace properly for such packages,
so even though the package file could be fetched from the external,
Spack is unable to locate it.
This commit avoids the issue by skipping any attempt to locate and copy
from the package repository of externals, regardless of whether they
have a Spack repo directory.
* Buildcache:
* Try mocking an install of quux, corge and garply using prebuilt binaries
* Put patchelf install after ccache restore
* Add script to install patchelf from source so it can be used on Ubuntu:Trusty which does not have a patchelf pat package. The script will skip building on macOS
* Remove mirror at end of bindist test
* Add patchelf to Ubuntu build env
* Revert mock patchelf package to allow other tests to run.
* Remove depends_on('patchelf', type='build') relying instead on
* Test fixture to ensure patchelf is available.
* Call g++ command to build libraries directly during test build
* Flake8
* Install patchelf in before_install stage using apt unless on Trusty where a build is done.
* Add some symbolic links between packages
* Flake8
* Flake8:
* Update mock packages to write their own source files
* Create the stage because spec search does not create it any longer
* updates after change of list command arguments
* cleanup after merge
* flake8
fixes#17396
This prevents the class attribute to be inherited and
saves current maintainers from becoming the default
maintainers of every Cuda package.
We got rid of `master` after #17377, but users still want a way to get
the latest stable release without knowing its number.
We've added a `releases/latest` tag to replace what was once `master`.
Co-authored-by: Massimiliano Culpo <massimiliano.culpo@gmail.com>
Fixes#16478
This allows an uninstall to proceed even when encountering pre-uninstall
hook failures if the user chooses the --force option for the uninstall.
This also prevents post-uninstall hook failures from raising an exception,
which would terminate a sequence of uninstalls. This isn't likely essential
for #16478, but I think overall it will improve the user experience: if
the post-uninstall hook fails, there isn't much point in terminating a
sequence of spec uninstalls because at the point where the post-uninstall
hook is run, the spec has already been removed from the database (so it
will never have another chance to run).
Notes:
* When doing spack uninstall -a, certain pre/post-uninstall hooks aren't
important to run, but this isn't easy to track with the current model.
For example: if you are uninstalling a package and its extension, you
do not have to do the activation check for the extension.
* This doesn't handle the uninstallation of specs that are not in the DB,
so it may leave "dangling" specs in the installation prefix
- [x] Remove references to `master` branch
- [x] Document how release branches are structured
- [x] Document how to make a major release
- [x] Document how to make a point release
- [x] Document how to do work in our release projects
Spack was attempting to calculate abspath on the located config.guess
path even when it was not found (None); this commit skips the abspath
calculation when config.guess is not found.
* Move flake8 tests on Github Actions
* Move shell test to Github Actions
* Moved documentation build to Github Action
* Don't run coverage on Python 2.6
Since we get connection errors consistently on Travis
when trying to upload coverage results for Python 2.6,
avoid computing coverage entirely to speed-up tests.
* share/spack/setup-env.fish file to setup environment in fish shell
* setup-env.fish testing script
* Update share/spack/setup-env.fish
Co-Authored-By: Elsa Gonsiorowski, PhD <gonsie@me.com>
* Update share/spack/qa/setup-env-test.fish
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* updates completions using `spack commands --update-completion`
* added stderr-nocaret warning
* added fish shell tests to CI system
Co-authored-by: becker33 <becker33@llnl.gov>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Elsa Gonsiorowski, PhD <gonsie@me.com>
* cray: detect frontend compilers automatically
This commit permits to detect frontend compilers
automatically, with the exception of cce.
Co-authored-by: Gregory Becker <becker33.llnl.gov>
[george.hartzell@172-16-193-97 spack-explore-docker]$ spack containerize
Running `spack containerize` with the example `spack.yaml` file fails
with an error that ends like so:
```
[...]
File "/local_scratch/hartzell/tmp/spack-explore-docker/lib/spack/external/ruamel/yaml/scanner.py", line 165, in need_more_tokens
self.stale_possible_simple_keys()
File "/local_scratch/hartzell/tmp/spack-explore-docker/lib/spack/external/ruamel/yaml/scanner.py", line 309, in stale_possible_simple_keys
"could not find expected ':'", self.get_mark())
ruamel.yaml.scanner.ScannerError: while scanning a simple key
in "/local_scratch/hartzell/tmp/spack-explore-docker/spack.yaml", line 26, column 1
could not find expected ':'
in "/local_scratch/hartzell/tmp/spack-explore-docker/spack.yaml", line 28, column 5
```
Indenting the block string fixes the problem for me.
CentOS 7,
```
$ spack --version
0.14.2-1529-ec58f28c2
```
* env: no automatic activation
* Ensure ci rebuild jobs activate the environment (no longer automagic)
Co-authored-by: Scott Wittenburg <scott.wittenburg@kitware.com>
* Start moving toward a json buildcache index
* Add spec and database index schemas
* Add a schema for buildcache spec.yaml files
* Provide a mode for database class to generate buildcache index
* Update db and ci tests to validate object w/ new schema
* Remove unused temporary upload-s3 command
* Use database class to generate buildcache index
* Do not generate index with each buildcache creation
* Make buildcache index mode into a couple of constructor args to Database class
* Use keyword args for _createtarball
* Parse new json index when we get specs from buildcache
Now that only one index file per mirror needs to be fetched in
order to have all the concrete specs for binaries available on the
mirror, we can just fetch and refresh the cached specs every time
instead of needing to use the '-f' flag to force re-reading.
* First fix for SPACK_DEPENDENCIES problem when doing setup
* Get rid of transitive include path in setup.
* Export SPACK_INCLUDE_DIRS into spconfig.py
* add buildcache create test
* add functionality and test to create buildcache from environment
* use env.concretized_user_specs rather than env.roots to get concretized specs, as suggested in review from becker33
* Allow `spack remove -f` and `spack uninstall` to work on matrices
Allow Environment.remove(force=True) to remove the concrete spec from the environment
even when the user spec cannot be removed because it is in a matrix.
* Separate Apple Clang from LLVM Clang
Apple Clang is a compiler of its own. All places
referring to "-apple" suffix have been updated.
* Hack to use a dash in 'apple-clang'
To be able to use autodoc from Sphinx we need
a valid Python name for the module that contains
Apple's Clang code.
* Updated packages to account for the existence of apple-clang
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* Added unit test for XCode related functions
Co-authored-by: Gregory Becker <becker33@llnl.gov>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* short-circuit is_activated check when the extendee is installed upstream
* add test for checking activation status of packages with an extendee installed upstream
spack config add <value>: add nested value value to the configuration scope specified
spack config remove/rm: remove specified configuration from the relevant scope
* Some minor fixes to set_permissions() in file_permissions.py
The set_permissions() routine claims to prevent users from creating
world writable suid binaries. However, it seems to only be checking
for/preventing group writable suid binaries.
This patch modifies the routine to check for both world and group
writable suid binaries, and complain appropriately.
* permissions.py: Add test to check blocks world writable SUID files
The original test_chmod_rejects_group_writable_suid tested
that the set_permissions() function in
lib/spack/spack/util/file_permissions.py
would raise an exception if changed permission on a file with
both SUID and SGID plus sticky bits is chmod-ed to g+rwx and o+rwx.
I have modified so that more narrowly tests a file with SUID
(and no SGID or sticky bit) set is chmod-ed to g+w.
I have added a second test test_chmod_rejects_world_writable_suid
that checks that exception is raised if an SUID file is chmod-ed
to o+w
* file_permissions.py: Raise exception when try to make sgid file world writable
Updated set_permissions() in file_permissions.py to also raise
an exception if try to make an SGID file world writable. And
added corresponding unit test as well.
* Remove debugging prints from permissions.py
* Module index should not be unconditionally overwritten
Uncovered after we switched our CI to generate modules for packages
one-by-one rather than in bulk. This overwrote a complete module index
with an index with a single entry, and broke our downstream Spack
instances that needed the upstream module index.
* Changed the 'include' config section to use 'substitute_path_variables' to allow for Spack config variables to be used (e.g. $spack).
* Fixed a bug with 'include' section path expansion and added a test case for 'include' paths with embedded config variables.
* Cray: fix Blue Waters support
* pkg-config env vars needed on Blue Waters
* cray platform: fix support for user-build MPI on cray machines
* reintroduce cray environment cleaning behind cnl version guard
* cray platform: fix support for user-build MPI on cray machines
Co-authored-by: Gregory <becker33@llnl.gov>
Builds can be stopped before the final install phase due to user requests. Those builds
should not be registered as installed in the database.
We had code intended to handle this but:
1. It caught the wrong type of exception
2. We were catching these exceptions to suppress them at a lower level in the stack
This PR allows the StopIteration to propagate through a ChildError, and catches it
properly. Also added to an existing test to prevent regression.
This fixes a fork bomb in `spack versions`. Recursive generation of pools
to scrape URLs in `_spider` was creating large numbers of processes.
Instead of recursively creating process pools, we now use a single
`ThreadPool` with a concurrency limit.
More on the issue: having ~10 users running at the same time spack
versions on front-end nodes caused kernel lockup due to the high number
of sockets opened (sys-admin reports ~210k distributed over 3 nodes).
Users were internal, so they had ulimit -n set to ~70k.
The forking behavior could be observed by just running:
$ spack versions boost
and checking the number of processes spawned. Number of processes
per se was not the issue, but each one of them opens a socket
which can stress `iptables`.
In the original issue the kernel watchdog was reporting:
Message from syslogd@login03 at May 19 12:01:30 ...
kernel:Watchdog CPU:110 Hard LOCKUP
Message from syslogd@login03 at May 19 12:01:31 ...
kernel:watchdog: BUG: soft lockup - CPU#110 stuck for 23s! [python3:2756]
Message from syslogd@login03 at May 19 12:01:31 ...
kernel:watchdog: BUG: soft lockup - CPU#94 stuck for 22s! [iptables:5603]
* add an --exclude-file option to 'spack mirror create' which allows a user to specify a file of specs to exclude when creating a mirror. this is anticipated to be useful especially when using the '--all' option
* allow specifying number of versions when mirroring all packages
* when mirroring all specs within an environment, include dependencies of root specs
* add '--exclude-specs' option to allow user to specify that specs should be excluded on the command line
* add test for excluding specs
fixes#12527
Mention that specs can be uninstalled by hash also in
the help message. Reference `spack gc` in case people
are looking for ways to clean the store from build time
dependencies.
Use "spec" instead of "package" to avoid ambiguity in
the error message.
* Unify tests for compiler command in the same file
Tests for the "spack compiler" command were previously
scattered among different files.
* Tests should use mutable_config, since they modify the compiler list
Because of the way abstract variants are implemented, the following
spec matrix does not work as intended:
```
matrix:
- [foo]
- [bar=a, bar=b]
exclude:
- bar=a
```
because abstract variants always satisfy any variant of the same
name, regardless of values.
This PR converts abstract variants to whatever their appropriate
type is before running satisfaction checks for the excludes clause
in a matrix.
fixes#16841
Now that the version number of GCC reached double digits, an update
to the regex is needed to recognize gcc-10 as an executable to be
inspected when searching for compilers.
* make_link_relative: added docstring
* make_elf_binaries_relative: added docstring, unit tests
* raise_if_not_relocatable: added docstring, added unit test for exceptional case
* relocate_links: removed unused arguments, added docstring and comments
Also fixed a possible bug that was issuing spurious
warning when a file was relocated successfully
* relocate_text: added docstring and comments, renamed arguments
* relocate_text_bin: added docstring and comments, renamed arguments, unit tests
Problem: when calling `static_to_shared_library` on the `cray` arch, it
produces a non-sensical compiler command with no input files. For
example, when installing lua@5.2.4, it produced:
'gcc -lm -ldl -o /big-long-spack-path/liblua.so.5.2.4'
Solution: do the same thing on `cray` that is done for `linux`
* account for schema validation errors where the associated instance doesn't have a line number
* fix unrelated flake error (but it must be fixed because this PR touches this file and the flake rules have been updated since the last edit to this file)
Allows `all` to be configured non-buildable in packages.yaml.
The following config would only allow zlib to be built by Spack, all other packages would have to be found as externals.
```
packages:
all:
buildable: False
zlib:
buildable: True
```
This change also adds a code path through the spack ci pipelines
infrastructure which supports PR testing on the Spack repository.
Gitlab pipelines run as a result of a PR (either creation or pushing
to a PR branch) will only verify that the packages in the environment
build without error. When the PR branch is merged to develop,
another pipeline will run which results in the generated binaries
getting pushed to the binary mirror.
Providing only $padding or ${padding} results in an attempt to
substitute a padding of maximum system path length, while leaving
room for the parts of the install path spack generates. Providing
$padding-<len> or ${padding-<len>} simply substitutes padding of
the specified length.
Packages built with lmod core_compiler are placed in `Core`.
Other packages may belong in `Core`. For example, python may be built with a proprietary compiler for performance, but belong on the `Core` directory.
With this PR, lmod config can include a `core_specs` list. Any package that satisfies a spec in that list is placed in `Core`, regardless of its compiler or dependencies.
This improves the documentation for `spack external find` in several ways:
* Provide a code example of implementing `determine_spec_details` for a package
* Explain how to define executables to look for (and also e.g. that they are treated as regular expressions and so can pull in unexpected files).
* Add the "why" for a couple of constraints (i.e. explain that this logic only works for build/run deps because it examines `PATH` for executables)
* Spread the docs between build customization and packaging sections
* Add cross-references
* Add a label so that `spack external find` is linked from the command reference.
* Add pmi support (required by ucx, ofi, and gni backends)
* Add support for ucx backend
* Add dependency on MPI for pmi=simplepmi, slurmpmi, or slurmpmi2
* Remove charmpp as an MPI provider since the changes in this PR can
add MPI as a dependency (mentioned previously)
* Install into transport_protocol-OS-arch subdirectory to match
default charmpp installation behavior (which helps dependents find it)
- add docstrings and make parameter names consistent in `relocate.py`
- Make `replace_prefix_*` and other functions private (as they are implementation details)
- remove unused function _replace_prefix_nullterm()
- Add unit tests for `relocate.py` functions
- add patchelf to Travis and use it during tests
- add hello_world fixture with a compiled binary, so we can test relocation
After migrating to `travis-ci.com`, we saw I/O issues in our tests --
tests that relied on `capfd` and `capsys` were failing. We've also seen
this in GitHub actions, and it's kept us from switching to them so far.
Turns out that the issue is that using streams like `sys.stdout` as
default arguments doesn't play well with `pytest` and output redirection,
as `pytest` changes the values of `sys.stdout` and `sys.stderr`. if these
values are evaluated before output redirection (as they are when used as
default arg values), output won't be captured properly later.
- [x] replace all stream default arg values with `None`, and only assign stream
values inside functions.
- [x] fix tests we didn't notice were relying on this erroneous behavior
This adds the `url` alternative `urls` to `package.all_urls`. With
this addition, one can find again new versions with
`spack versions <package>` for packages that are populated with
from mixin mirror `urls`.
Example: `util-macros` from x.org mixin.
* Non-interactive mode for spack checksum; allow passing 'package@version' to spack checksum
* Flake8 fixes
* Update checksum.py
Fix typo
* Update spack-completion script
* Automatically set non-interactive mode if more than one version passed
* Update lib/spack/spack/cmd/checksum.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* Add documentation and update spack-completion
* Flake8
* Rename option
* Update spack-completion
* Update lib/spack/spack/cmd/checksum.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* Update checksum.py
* Update stage.py
* Update create.py
Use batch mode when adding a new package
Co-authored-by: Ivan Razumov <ivan.razumov@cern.ch>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
This fixes some errors with setting up test configuration. These
errors do not cause current Spack tests to fail but do create
red herring issues elsewhere (see #15666). Fixing these errors
leads to more errors in tests that depended on the original
misconfigured state, so those are also addressed here.
This is an update to #16003 which accounts for some unit tests with
conflicting config/mutable_config fixtures. These conflicts were
not exposed until the mutable_config fixture was fixed. Details are
included below. The change which builds on #16003 is prefixed with
"(new)".
* For tests that use the real Spack package repository, the config
needs to avoid using MPI providers that are not intended to be
installed by Spack. Without this, it is possible that Spack tests
which concretize the MPI virtual will end up trying to use an
implementation that it shouldn't (e.g. one that is always
provided externally). See #15666 for an example.
* The mutable_config test fixture was not initializing the scope
roots to the right directories (so the resulting config was empty).
* The current_host fixture in the concretize.py tests was using the
config fixture rather than mutable_config, and was polluting the
config cache for other tests.
* One test in concretize.py was clearing a nonexistent cache
(PackagePrefs._packages_config_cache). This reference has been
removed.
* The test 'test_preferred_compilers' was was depending on cross
test config pollution to succeed. The initial spec before
concretization has been updated to updated to be explicit about
the desired result.
* (new) For tests that use install_mockery and mutable_config,
replace install_mockery with a separate install_mockery_mutable_config
fixture that is exactly the same as install_mockery but uses the
mutable_config fixture to avoid conflicts.
Fixed#15884.
Spack asks every package linked into an environment to tell us how
environment variables should be modified when a spack environment is
activated. As part of this, specs in an environment are symlinked into
the environment's view (see #13249), and the package calculates
environment modifications with *the default view as the prefix*.
All of this works nicely for pointing the user's environment at the view
*if* every package is successfully linked. Unfortunately, right now we
only track what specs "should" be in a view, not which specs actually
are. So we end up calculating environment modifications on things that
aren't linked into thee view, and the exception isn't caught, so lots of
spack commands end up failing.
This fixes the issue by ignoring and warning about specs where
calculating environment modifications fails. So we can still keep using
Spack even if the current environment is incomplete.
We should probably also just avoid computing env modifications *entirely*
for unlinked packages, but right now that is a slow operation (requires a
lot of YAML parsing). We should revisit that when we have some better
state management for views, but the fix adopted here will still be
necessary, as we want spack commands to be resilient to other types of
bugs in `setup_run_environment()` and friends. That code is in packages
and we have to assume it could be buggy when we call it outside of builds
(as it might fail more than just the build).
