The full hash appears twice in the spec dict now, replacing just
the value replaces it under "hash" and "full_hash". Only replace
the one that appears after "full_hash".
I'm actually not sure what purpose this test served, so maybe it
could be removed, as it may be testing some distinction between
full and dag hash which no longer exists.
For a long time, Spack has used a coarser hash to identify packages
than it likely should. Packages are identified by `dag_hash()`, which
includes only link and run dependencies. Build dependencies are
stripped before hashing, and we have notincluded hashes of build
artifacts or the `package.py` files used to build. This means the
DAG hash actually doesn't represent all the things Spack can build,
and it reduces reproducibility.
We did this because, in the early days, users were (rightly) annoyed
when a new version of CMake, autotools, or some other build dependency
would necessitate a rebuild of their entire stack. Coarsening the hash
avoided this issue and enabled a modicum of stability when only reusing
packages by hash match.
Now that we have `--reuse`, we don't need to be so careful. Users can
avoid unnecessary rebuilds much more easily, and we can add more
provenance to the spec without worrying that frequent hash changes
will cause too many rebuilds.
This commit starts the refactor with the following major change:
- [x] Make `Spec.dag_hash()` include build, run, and link
dependencides and the package hash (it is now equivalent to
`full_hash()`).
It also adds a couple of bugfixes for problems discovered during
the switch:
- [x] Don't add a `package_hash()` in `to_node_dict()` unless
the spec is concrete (fixes breaks on abstract specs)
- [x] Don't add source ids to the package hash for packages without
a known fetch strategy (may mock packages are like this)
- [x] Change how `Spec.patches` is memoized. Using
`llnl.util.lang.memoized` on `Spec` objects causes specs to
be stored in a `dict`, which means they need a hash. But,
`dag_hash()` now includes patch `sha256`'s via the package
hash, which can lead to infinite recursion
`spack pkg list` tests were broken by #29593 for cases when your `builtin.mock` repo
still has stale backup files (or, really, stale directories) sitting around. This
happens if you switch branches a lot. In this case, things like this were causing
erroneous packages in the mock listing:
```
var/spack/repos/builtin.mock/packages/
foo/
package.py~
```
- [x] make `list_packages` consider only directories with one-deep `package.py` files.
Reworking lua to allow easier substitution of the base lua implementation.
Also adding in a maintained version of luajit and re-factoring the entire stack
to use a custom build-system to centralize functionality like environment
variable management and luarocks installation.
The `lua-lang` virtual is now versioned so that a package that requires
Lua 5.1 semantics can get any lua, but one that requires 5.2 will only
get upstream lua.
The luaposix package requires lua-bit32, but only when built with a
lua conforming to version 5.1. This adds the package, and the
dependencies, but exposed a problem with luarocks dependency
detection. Since we're installing each package in its own "tree" and
there's no environment variable to list extra trees, spack now
generates a luarocks config file that lists all the trees of all the
dependencies, and references it by setting `LUAROCKS_CONFIG`
in the build environment of every LuaPackage. This allows luarocks
to find the spack installed dependencies correctly rather than
trying (and failing) to download them.
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Tom Scogland <tscogland@llnl.gov>
Co-authored-by: Massimiliano Culpo <massimiliano.culpo@gmail.com>
Some of our `git` tests still fail when `init.defaultBranch` is set to something other
than `master`.
- [x] get rid of all hard-coded `master` refs
- [x] Use `'default'` to key tests that use the default branch
When running on Windows, Spack may generate files in the stage/install
prefixes that do not have write permissions, which prevents the
removal of those directories (e.g. when cleaning stages or uninstalling).
There should be a refactoring to avoid this in the first place, but that
is assumed to be longer term, so the temporary fix is to make such files
writable if they are not. This PR:
* Automatically handles these permissions errors when uninstalling
packages from the Spack root (makes then writable)
* Updates similar already-existing logic when removing Spack-managed
stage directories (the error-handling was assuming all errors were
permissions errors and was therefore handling other errors
inappropriately)
Note: these permissions issues only appear on Windows so this logic is
only applied there (permissions are not modified for this purpose on
Linux etc.).
This also adds special handling for a case where calling `isdir`
on an `os.DirEntry` object would fail for improperly-created symlinks
(e.g. on Windows, using `os.symlink` without `target_is_directory=True`).
Note this specific issue only came up when enabling link_tree tests
(specifically `source_merge_visitor_cant_be_cyclical`).
* create function for translating compiler names on specs/compiler entries in manifest
* add tests for translating compiler names on spec/compiler entries
* use higher-level function in test and add comment to prefer testing via higher-level function
* opensuse clingo check should not fail on account of this pr, but I cannot get it to pass by restarting via CI UI
* Force GCC to always provide a C++14 flag
Updated gnu logic so that the c++14 flag for g++ is always propagated.
This fixes issues with build systems that error out if passed an empty
string for a flag.
Engaging in the best kind of software engineering by updating the unit
test to pass with the value it is now passed. This should better match
the expected flag for g++ compiling with the C++14 standard
This ensures that multiple spack instances called from `make` will respect the maximum number of jobs in the POSIX jobserver across packages.
Co-authored-by: Harmen Stoppels <harmenstoppels@gmail.com>
* use the init.defaultBranch name, not master
* make tcl and modules/common independent
Both used to use not just the same directory, but the same *file* for
their outputs. In parallel this can cause problems, but it can also
accidentally allow expected failures to pass if the file is left around
by mistake.
* use a non-global misc_cache in tests
* make pkg tests resilient to gitignore
* make source cache and module directories non-global
`make` solves a lot of headaches that would otherwise have to be implemented in Spack:
1. Parallelism over packages through multiple `spack install` processes
2. Orderly output of parallel package installs thanks to `make --sync-output=recurse` or `make -Orecurse` (works well in GNU Make 4.3; macOS is unfortunately on a 16 years old 3.x version, but it's one `spack install gmake` away...)
3. Shared jobserver across packages, which means a single `-j` to rule them all, instead of manually finding a balance between `#spack install processes` & `#jobs per package` (See #30302).
This pr adds the `spack env depfile` command that generates a Makefile with dag hashes as
targets, and dag hashes of dependencies as prerequisites, and a command
along the lines of `spack install --only=packages /hash` to just install
a single package.
It exposes two convenient phony targets: `all`, `fetch-all`. The former installs the environment, the latter just fetches all sources. So one can either use `make all -j16` directly or run `make fetch-all -j16` on a login node and `make all -j16` on a compute node.
Example:
```yaml
spack:
specs: [perl]
view: false
```
running
```
$ spack -e . env depfile --make-target-prefix env | tee Makefile
```
generates
```Makefile
SPACK ?= spack
.PHONY: env/all env/fetch-all env/clean
env/all: env/env
env/fetch-all: env/fetch
env/env: env/.install/cdqldivylyxocqymwnfzmzc5sx2zwvww
@touch $@
env/fetch: env/.fetch/cdqldivylyxocqymwnfzmzc5sx2zwvww env/.fetch/gv5kin2xnn33uxyfte6k4a3bynhmtxze env/.fetch/cuymc7e5gupwyu7vza5d4vrbuslk277p env/.fetch/7vangk4jvsdgw6u6oe6ob63pyjl5cbgk env/.fetch/hyb7ehxxyqqp2hiw56bzm5ampkw6cxws env/.fetch/yfz2agazed7ohevqvnrmm7jfkmsgwjao env/.fetch/73t7ndb5w72hrat5hsax4caox2sgumzu env/.fetch/trvdyncxzfozxofpm3cwgq4vecpxixzs env/.fetch/sbzszb7v557ohyd6c2ekirx2t3ctxfxp env/.fetch/c4go4gxlcznh5p5nklpjm644epuh3pzc
@touch $@
env/dirs:
@mkdir -p env/.fetch env/.install
env/.fetch/%: | env/dirs
$(info Fetching $(SPEC))
$(SPACK) -e '/tmp/tmp.7PHPSIRACv' fetch $(SPACK_FETCH_FLAGS) /$(notdir $@) && touch $@
env/.install/%: env/.fetch/%
$(info Installing $(SPEC))
+$(SPACK) -e '/tmp/tmp.7PHPSIRACv' install $(SPACK_INSTALL_FLAGS) --only-concrete --only=package --no-add /$(notdir $@) && touch $@
# Set the human-readable spec for each target
env/%/cdqldivylyxocqymwnfzmzc5sx2zwvww: SPEC = perl@5.34.1%gcc@10.3.0+cpanm+shared+threads arch=linux-ubuntu20.04-zen2
env/%/gv5kin2xnn33uxyfte6k4a3bynhmtxze: SPEC = berkeley-db@18.1.40%gcc@10.3.0+cxx~docs+stl patches=b231fcc arch=linux-ubuntu20.04-zen2
env/%/cuymc7e5gupwyu7vza5d4vrbuslk277p: SPEC = bzip2@1.0.8%gcc@10.3.0~debug~pic+shared arch=linux-ubuntu20.04-zen2
env/%/7vangk4jvsdgw6u6oe6ob63pyjl5cbgk: SPEC = diffutils@3.8%gcc@10.3.0 arch=linux-ubuntu20.04-zen2
env/%/hyb7ehxxyqqp2hiw56bzm5ampkw6cxws: SPEC = libiconv@1.16%gcc@10.3.0 libs=shared,static arch=linux-ubuntu20.04-zen2
env/%/yfz2agazed7ohevqvnrmm7jfkmsgwjao: SPEC = gdbm@1.19%gcc@10.3.0 arch=linux-ubuntu20.04-zen2
env/%/73t7ndb5w72hrat5hsax4caox2sgumzu: SPEC = readline@8.1%gcc@10.3.0 arch=linux-ubuntu20.04-zen2
env/%/trvdyncxzfozxofpm3cwgq4vecpxixzs: SPEC = ncurses@6.2%gcc@10.3.0~symlinks+termlib abi=none arch=linux-ubuntu20.04-zen2
env/%/sbzszb7v557ohyd6c2ekirx2t3ctxfxp: SPEC = pkgconf@1.8.0%gcc@10.3.0 arch=linux-ubuntu20.04-zen2
env/%/c4go4gxlcznh5p5nklpjm644epuh3pzc: SPEC = zlib@1.2.12%gcc@10.3.0+optimize+pic+shared patches=0d38234 arch=linux-ubuntu20.04-zen2
# Install dependencies
env/.install/cdqldivylyxocqymwnfzmzc5sx2zwvww: env/.install/gv5kin2xnn33uxyfte6k4a3bynhmtxze env/.install/cuymc7e5gupwyu7vza5d4vrbuslk277p env/.install/yfz2agazed7ohevqvnrmm7jfkmsgwjao env/.install/c4go4gxlcznh5p5nklpjm644epuh3pzc
env/.install/cuymc7e5gupwyu7vza5d4vrbuslk277p: env/.install/7vangk4jvsdgw6u6oe6ob63pyjl5cbgk
env/.install/7vangk4jvsdgw6u6oe6ob63pyjl5cbgk: env/.install/hyb7ehxxyqqp2hiw56bzm5ampkw6cxws
env/.install/yfz2agazed7ohevqvnrmm7jfkmsgwjao: env/.install/73t7ndb5w72hrat5hsax4caox2sgumzu
env/.install/73t7ndb5w72hrat5hsax4caox2sgumzu: env/.install/trvdyncxzfozxofpm3cwgq4vecpxixzs
env/.install/trvdyncxzfozxofpm3cwgq4vecpxixzs: env/.install/sbzszb7v557ohyd6c2ekirx2t3ctxfxp
env/clean:
rm -f -- env/env env/fetch env/.fetch/cdqldivylyxocqymwnfzmzc5sx2zwvww env/.fetch/gv5kin2xnn33uxyfte6k4a3bynhmtxze env/.fetch/cuymc7e5gupwyu7vza5d4vrbuslk277p env/.fetch/7vangk4jvsdgw6u6oe6ob63pyjl5cbgk env/.fetch/hyb7ehxxyqqp2hiw56bzm5ampkw6cxws env/.fetch/yfz2agazed7ohevqvnrmm7jfkmsgwjao env/.fetch/73t7ndb5w72hrat5hsax4caox2sgumzu env/.fetch/trvdyncxzfozxofpm3cwgq4vecpxixzs env/.fetch/sbzszb7v557ohyd6c2ekirx2t3ctxfxp env/.fetch/c4go4gxlcznh5p5nklpjm644epuh3pzc env/.install/cdqldivylyxocqymwnfzmzc5sx2zwvww env/.install/gv5kin2xnn33uxyfte6k4a3bynhmtxze env/.install/cuymc7e5gupwyu7vza5d4vrbuslk277p env/.install/7vangk4jvsdgw6u6oe6ob63pyjl5cbgk env/.install/hyb7ehxxyqqp2hiw56bzm5ampkw6cxws env/.install/yfz2agazed7ohevqvnrmm7jfkmsgwjao env/.install/73t7ndb5w72hrat5hsax4caox2sgumzu env/.install/trvdyncxzfozxofpm3cwgq4vecpxixzs env/.install/sbzszb7v557ohyd6c2ekirx2t3ctxfxp env/.install/c4go4gxlcznh5p5nklpjm644epuh3pzc
```
Then with `make -O` you get very nice orderly output when packages are built in parallel:
```console
$ make -Orecurse -j16
spack -e . install --only-concrete --only=package /c4go4gxlcznh5p5nklpjm644epuh3pzc && touch c4go4gxlcznh5p5nklpjm644epuh3pzc
==> Installing zlib-1.2.12-c4go4gxlcznh5p5nklpjm644epuh3pzc
...
Fetch: 0.00s. Build: 0.88s. Total: 0.88s.
[+] /tmp/tmp.b1eTyAOe85/store/linux-ubuntu20.04-zen2/gcc-10.3.0/zlib-1.2.12-c4go4gxlcznh5p5nklpjm644epuh3pzc
spack -e . install --only-concrete --only=package /sbzszb7v557ohyd6c2ekirx2t3ctxfxp && touch sbzszb7v557ohyd6c2ekirx2t3ctxfxp
==> Installing pkgconf-1.8.0-sbzszb7v557ohyd6c2ekirx2t3ctxfxp
...
Fetch: 0.00s. Build: 3.96s. Total: 3.96s.
[+] /tmp/tmp.b1eTyAOe85/store/linux-ubuntu20.04-zen2/gcc-10.3.0/pkgconf-1.8.0-sbzszb7v557ohyd6c2ekirx2t3ctxfxp
```
For Perl, at least for me, using `make -j16` versus `spack -e . install -j16` speeds up the builds from 3m32.623s to 2m22.775s, as some configure scripts run in parallel.
Another nice feature is you can do Makefile "metaprogramming" and depend on packages built by Spack. This example fetches all sources (in parallel) first, print a message, and only then build packages (in parallel).
```Makefile
SPACK ?= spack
.PHONY: env
all: env
spack.lock: spack.yaml
$(SPACK) -e . concretize -f
env.mk: spack.lock
$(SPACK) -e . env depfile -o $@ --make-target-prefix spack
fetch: spack/fetch
@echo Fetched all packages && touch $@
env: fetch spack/env
@echo This executes after the environment has been installed
clean:
rm -rf spack/ env.mk spack.lock
ifeq (,$(filter clean,$(MAKECMDGOALS)))
include env.mk
endif
```
Added support for finding the OpenCV package via the find external
command. Included support for identifying variants based on available
shared libraries.
Added support to finding the OpenBLAS package via the find external
command.
Enabled packages to show that they can be discovered via the find
external command in the info message.
Updated the OpenCV and OpenBLAS packages to use the extensible search
mechanism for library extensions on multiple OS platforms.
Corrected how find externals works on Darwin for OpenCV and OpenBLAS
to accommodate that the version numbers are placed before the file
extension instead of after it, as on Linux.
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Massimiliano Culpo <massimiliano.culpo@gmail.com>
This is an amended version of https://github.com/spack/spack/pull/24894 (reverted in https://github.com/spack/spack/pull/29603). https://github.com/spack/spack/pull/24894
broke all instances of `spack external find` (namely when it is invoked without arguments/options)
because it was mandating the presence of a file which most systems would not have.
This allows `spack external find` to proceed if that file is not present and adds tests for this.
- [x] Add a test which confirms that `spack external find` successfully reads a manifest file
if present in the default manifest path
--- Original commit message ---
Adds `spack external read-cray-manifest`, which reads a json file that describes a
set of package DAGs. The parsed results are stored directly in the database. A user
can see these installed specs with `spack find` (like any installed spec). The easiest
way to use them right now as dependencies is to run
`spack spec ... ^/hash-of-external-package`.
Changes include:
* `spack external read-cray-manifest --file <path/to/file>` will add all specs described
in the file to Spack's installation DB and will also install described compilers to the
compilers configuration (the expected format of the file is described in this PR as well including examples of the file)
* Database records now may include an "origin" (the command added in this PR
registers the origin as "external-db"). In the future, it is assumed users may want
to be able to treat installs registered with this command differently (e.g. they may
want to uninstall all specs added with this command)
* Hash properties are now always preserved when copying specs if the source spec
is concrete
* I don't think the hashes of installed-and-concrete specs should change and this
was the easiest way to handle that
* also specs that are concrete preserve their `.normal` property when copied
(external specs may mention compilers that are not registered, and without this
change they would fail in `normalize` when calling `validate_or_raise`)
* it might be this should only be the case if the spec was installed
- [x] Improve testing
- [x] Specifically mark DB records added with this command (so that users can do
something like "uninstall all packages added with `spack read-external-db`)
* This is now possible with `spack uninstall --all --origin=external-db` (this will
remove all specs added from manifest files)
- [x] Strip variants that are listed in json entries but don't actually exist for the package
* ASP-based solver: discard unknown packages from reuse
This is an add-on to #28259 that cover for the case of
a single package.py being removed from a repository,
rather than an entire custom repository being removed.
* Add unit test
CTest determines whether to enable tests using the BUILD_TESTING variable.
This should be used by projects to conditionally enable the compilation of tests.
Spack knowns which packages have to run tests and can thus automatically define this variable.
I tried to use --overwrite on nvhpc, but nvhpc's install size is 16GB. Seems
better to do os.rename in the same directory than moving the directory to
`/tmp`.
- [x] install --overwrite: use rename instead of tmpdir
- [x] use tempfile
fixes#28259
This commit discard specs from unknown namespaces from the
ones that can be "reused" during concretization. Previously
Spack would just error out when encountering them.
The parent thread in the process stdout redirection logic on Windows
was closing a file that was being read in child thread, which lead to
error-based termination of the reader thread. This updates the
interaction to avoid the error.
* ASP-based solver: allow configuring target selection
This commit adds a new "concretizer:targets" configuration
section, and two options under it.
- "concretizer:targets:granularity" allows switching from
considering only generic targets to consider all possible
microarchitectures.
- "concretizer:targets:host_compatible" instead controls
whether we can concretize for microarchitectures that
are incompatible with the current host.
* Add documentation
* Add unit-tests
* ASP-based solver: always consider version of installed packages
fixes#29201
Explicitly add facts for versions of installed software when
using the --reuse option, so that we could consider versions
that are not declared in package.py
The parser is already committing a crime of querying the database for
specs when it encounters a `/hash`. It's helpful, but unfortunately not
helpful when trying to install a specific spec in an environment by
hash. Therefore, consider the environment first, then the database.
This allows the following:
```console
$ spack -e . concretize
==> Starting concretization
==> Environment concretized in 0.27 seconds.
==> Concretized diffutils
- 7vangk4 diffutils@3.8%gcc@10.3.0 arch=linux-ubuntu20.04-zen2
- hyb7ehx ^libiconv@1.16%gcc@10.3.0 libs=shared,static arch=linux-ubuntu20.04-zen2
$ spack -e . install /hyb7ehx
==> Installing libiconv-1.16-hyb7ehxxyqqp2hiw56bzm5ampkw6cxws
...
==> libiconv: Successfully installed libiconv-1.16-hyb7ehxxyqqp2hiw56bzm5ampkw6cxws
Fetch: 0.01s. Build: 17.54s. Total: 17.55s.
[+] /tmp/tmp.VpvYApofVm/store/linux-ubuntu20.04-zen2/gcc-10.3.0/libiconv-1.16-hyb7ehxxyqqp2hiw56bzm5ampkw6cxws
```
Fix bug introduced in #30191. `Spec.installed` and `Spec.installed_upstream` should just return
`False` for abstract specs, as they can be called in that context.
- [x] `Spec.installed` returns `False` now instead of asserting that the `Spec`
is concrete.
- [x] `Spec.installed_upstream` returns `False` now instead of asserting that the `Spec`
is concrete.
- [x] `Spec.installed_upstream` no longer caches its result, as install status seems
like a bad thing to cache -- it can easily be invalidated. Calling code should
use transactions if there are peformance issues, as with other places in Spack.
- [x] add tests for `Spec.installed` and `Spec.installed_upstream`
This PR moves the `installed` and `installed_upstream` properties from `PackageBase` to `Spec` and is a step towards being able to reuse specs for which we don't have a `package.py` available. It _should_ be sufficient to complete the concretization step and see the spec in the concretized DAG.
To fully reuse a spec without a package.py though we need a way to serialize enough data to reconstruct the results of calls to:
- `Spec.libs`, `Spec.headers` and `Spec.ommand`
- `Package.setup_dependent_*_environment` and `Package.setup_run_environment`
- [x] Add stub methods to packages with warnings
- [x] Add a missing "root=False" in cmd/fetch.py
- [x] Assert that a spec is concrete before checking installation status
This PR updates the list of images we build nightly, deprecating
Ubuntu 16.04 and CentOS 8 and adding Ubuntu 20.04, Ubuntu 22.04
and CentOS Stream. It also removes a lot of duplication by generating
the Dockerfiles during the CI workflow and uploading them as artifacts
for later inspection or reuse.
