* fixes#967
* Version bump to 0.9.1
- Bugfixes for spack find
- 0.9.1 can read specs from current develop.
* Don't assume spack is in the path when building docs.
* adding mfem variants; do not assume build defaults
* adjusting format to clarify options
* fixing some build issues
* fixing mfem+sundials
* removing mesquite variant...turns out it is obsolete
* adding examples to mfem; fixing sundials darwin installs
* adding some additional variants and setting some configure flags by fiat
* switching most check_variants logic to conflicts() directives
* adding comment about cmake config
* fixing flake8 issues; thought I had already done that
* moving func def into install method
* switch yes_no to no_yes; fix miss-spelling of miniapps
* switching make target all to lib
* changing yes_no to function as requested; fix problem with same in sundials
* fix missing import sys directive
* adding master and develop versions to amrex
* Added a package for the MDAnalysis toolkit.
* Added additional packages that Elemental depends on.
* Changed LBANN to not ask for the scalapack variant in Elemental.
* Removed variant control on scalapack
* New package: qbox
* API changes
* Use install instead of shutil for comd
* Use any BLAS library
* Fix typo
* Python2 fix
* python2 + fix backslashes
* Modified to respond to ld_flags correctly
* Modified to use ld_flags
* Add ld_flags support
* Updated Changes
* Updated AMG with required MPI
* Updated AMG with Version ' changes'
* Fixed Issues with flag's and variant checks
* Updated with MPI Alone and Changes - NO Serial Variant
* Updated with MPI Alone and Changes - NO Serial Variant
* Fixed Flake 8 line length error
* Updated Spack Issues
* Update the krell institute products to use the latest features of spack for building on cluster platforms.
* Address travis error messages and resubmit the pull request.
* Update the contents of openspeedshop package.py so it passes the flake8 tests.
* Fix flake8 error-whitespack issue in mrnet package.py file.
* Add updates based on spack reviewer feedback.
* More fixes based on comments from reviewers. Switch using extend to using append, remove additional setting of PATH and LD_LIBRARY_PATH that should not be required due to RPATH.
* More review related changes. Update MPIOption.append lines and take out xercesc references.
* Create a base options function for common openspeedshop base cmake options to reduce redundencies.
* Add libxml2+python depends on to get around issues with the libxml2 package file.
* Using boost over 1.60.0 causes compile errors. This is a known boost bug. Also, dyninst-9.2.0 is set to be the vesrion of dyninst to use with OSS, as of now. The newer version fails to build.
* Fix bad syntax in specifying the boost version range.
* Update the version numbers for the krell institute components and tools: cbtf and openspeedshop.
* Do not build glib for qt3, it is not needed and causes build problems at this time anyway.
* A fix was added for setting LD_LIBRARY_PATH in the qt3 build, but if LD_LIBRARY_PATH is not set the qt build fails. So so check and set LD_LIBRARY_PATH if not set, update if it is set.
* Update the fix for qt3 build by setting LD_LIBRARY_PATH instead of checking for whether it is set or not per Adams comment that spack clears LD_LIBRARY_PATH.
* A fix was added for setting LD_LIBRARY_PATH in the qt3 build, but if LD_LIBRARY_PATH is not set the qt build fails. So so check and set LD_LIBRARY_PATH if not set, update if it is set.
* Trim comments to fit more concisely.
* Fix tabs versus spaces and swap if and else clause check from a negative to a positive check.
* Add new OpenSpeedShop gui package based on qt4/qt5 gui toolkit.
* Fix flake8 errors.
* Fix flake8 errors.
* Update bcl2fastq2 with info for 2.19.1.403
Heads up, the download location changed (domain name AND protocol).
* Flake8 fix
What's one space between friends?
* Adding lower bound to pnetcdf conflict in Trilinos to allow for use of develop and master branch.
* Using even lower bound for pnetcdf conflict in Trilinos.
* Added a package for the MDAnalysis toolkit.
* Changed cmake_options to args to be consistent with the rest of the
file and fix a cmake error about undefined errors. Additionally,
added guards for both png and zlib to not include their cmake options
when those variants are not specified.
* slurm: added initial recipe
* Modified variants following Adam comment.
The MV variant 'features' has been turned into a set of BV variants. The
dependency on 'readline' has been made optional.
* new package: cns-nospec
* made changes as suggested and added proxy-app tag
* updated edit()
* adjusted logic for '+debug'
* install readme and license
* install readme and license
* install readme and license; fix mpi version build issues
* fix build issues for ~mpi
* pep8 compliant
* new package: amr-exp-parabolic
* removed boilerplate and added tag
* install license and readme
* fix mpi build issues
* change access to include/lib directories and pep8 compliant now
* Update the krell institute products to use the latest features of spack for building on cluster platforms.
* Address travis error messages and resubmit the pull request.
* Update the contents of openspeedshop package.py so it passes the flake8 tests.
* Fix flake8 error-whitespack issue in mrnet package.py file.
* Add updates based on spack reviewer feedback.
* More fixes based on comments from reviewers. Switch using extend to using append, remove additional setting of PATH and LD_LIBRARY_PATH that should not be required due to RPATH.
* More review related changes. Update MPIOption.append lines and take out xercesc references.
* Create a base options function for common openspeedshop base cmake options to reduce redundencies.
* Add libxml2+python depends on to get around issues with the libxml2 package file.
* Using boost over 1.60.0 causes compile errors. This is a known boost bug. Also, dyninst-9.2.0 is set to be the vesrion of dyninst to use with OSS, as of now. The newer version fails to build.
* Fix bad syntax in specifying the boost version range.
* Update the version numbers for the krell institute components and tools: cbtf and openspeedshop.
* Do not build glib for qt3, it is not needed and causes build problems at this time anyway.
* A fix was added for setting LD_LIBRARY_PATH in the qt3 build, but if LD_LIBRARY_PATH is not set the qt build fails. So so check and set LD_LIBRARY_PATH if not set, update if it is set.
* Update the fix for qt3 build by setting LD_LIBRARY_PATH instead of checking for whether it is set or not per Adams comment that spack clears LD_LIBRARY_PATH.
* A fix was added for setting LD_LIBRARY_PATH in the qt3 build, but if LD_LIBRARY_PATH is not set the qt build fails. So so check and set LD_LIBRARY_PATH if not set, update if it is set.
* Trim comments to fit more concisely.
* Fix tabs versus spaces and swap if and else clause check from a negative to a positive check.
* Fix issues with the cbtf-argonavis build, update to use dyninst-9.3.2, fixes to openspeedshop package build.
* Fix issues with the cbtf-argonavis package.py files related to comments.
* Add changes for changing the krell packages from Package to CMakePackage.
* Add better changes for changing the krell packages from Package to CMakePackage.
* Add more modifications for changing the krell packages from Package to CMakePackage.
* Add additional modifications for changing the krell packages from Package to CMakePackage and fixing Travis erros
* Fix new travis errors.
* Fix new travis errors.
* Add more changes for PR 4765.
* Add more refinements to the conversion from Package to CMakePackage.
* Fix new travis errors.
* Add dependencies for MPI to be passed to cbtf-krell, so it can build the MPI collectors requested by the builder of openspeedshop.
* Remove extra unnecessary routine to adjust build arguments. Fix if-else clause issue.
* Fix more flake issues caused by last changes.
* Fix a bug where openspeedshop will not build when no mpi variants are specified. Also switch to a multiple level variant for building the gui(s). Use none, qt3, and qt4 as the variants with qt3 being the default.
* Add fix for spack issue #4843, where LTDL include files were not found.
* Add the build_type variant back into the openspeedshop package file.
* Add new package for the Argo Navis/Krell new graphical user support library: QtGraph.
* Revert "Add new package for the Argo Navis/Krell new graphical user support library: QtGraph."
This reverts commit f8883de446c404e46d4c33fe497ae1e9ab2f04a6.
* Add new package for the Argo Navis/Krell new graphical user support library: qtgraph.
* Fix flake8 errors.
* Fix flake8 errors.
* Fix flake8 errors.
* Fix flake8 errors.
* Fix flake8 errors.
* Add changes to support QMakePackage class instead of Package class for qtgraph.
* Update change for suggested reviewer improvements.
* Fix flake8 errors.
* Fix flake8 errors.
* new package: VPFFT
* install readme and license
* misc
* changed version name to 'develop'
* removed the misplaced package file
* updated eigen path, fixed docstring, and updated 'docs' installation method
* pep8 compliant, changed installation of docs
IceT places its CMake module in the wrong directory,
which is not included in the default CMake search paths.
This fixes it for *directly* depending packages without the
need to add
```yaml
icet:
environment:
prepend_path:
CMAKE_PREFIX_PATH: '${PREFIX}/lib'
```
to the `modules.yaml` as a workaround.
* Molcas 8.2: Adding molcas spec file
* Molcas 8.2: Putting in patch file for molcas driver not to be installed in spack stage directory
* Molcas making changes
* Making changes in ordering
* transabyss: new package and dependencies
* fixed build deps in igraph and version conflict spec in abyss
* fixed versioning stuff and package structure
* fixed dep type
* fixing dep type for real this time
Build system "usually" autodetects mpi library but this is
not the case on many platforms. Provide mpi library name/version
as part for configure args.
* savanna: explicitly adding variant sz to adios since it is no longer enabled by default in adios
* savanna: removing +sz from adios as sz is now enabled in adios by default
* savanna: explicitly specifying adios variants required by savanna
* adios: conform to pep8
* adios: added versions 1.11.0 and 1.12.0
* adios: added variant no_mpi to explicitly disable mpi support
* adios: add new variant mxml
adios v1.12.0 onwards contains an xml library built within.
To build with an external mxml, a new variant must be used
* adios: new variant for sz transform
* adios: flexpath and dataspaces staging variants
Two new variants for staging: flexpath and dataspaces.
New variant 'staging' that will enable both
* adios: dependency on libtool:2.4.2 since adios does not build with newer libtool 2.4.6
* adios: better description for variant no-mpi
* adios: new variant for netcdf
as requested by @mamelara from LBL
* adios: renamed variant 'no_mpi' to 'serial'
* adios: removed variant mxml
* adios: corrected implementation of the mpi dependency, along with its relation with the 'serial' variant
Added conflicts between 'serial' and other variants
* adios: added 'else' clause when variants are not added
* adios: replaced variant 'serial' with 'mpi'
* adios: Added configure option to explicitly disable variants that are not enabled.
* adios: setting default zfp to true
* adios: fixed flake8 errors
* adios: removed some old comments
* adios: setting default sz to False.
It is recommended to set default to False when dependency is on develop (sz@develop).
* adios: removing dependency on develop for sz and setting default sz to true
* adios: updated url to latest release.
Just keeping it clean
