* qscintilla_with_python_bindings_disabled
* pyqt5 with variant +qsci to compile qscintilla python bindings
* fix a dyn linking issue for Qsci python module
* fix a bug
* fix bug: use sip provided by py-pyqt5
* fix typo
* tidy up, make designer
* tidy up
* fix designer build issue, set env for designer plugin
* tidy up
* tidy up
* minor improvements
* improve style
* build Qscintilla python bindings here
* make qsci config option variant dependent
* get rid of commented out code
* improvements: add resource for qscintilla, improve config_args
* flake8: spaces, blank lines etc
* flake8: fix long lines
* Update var/spack/repos/builtin/packages/py-pyqt4/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-pyqt4/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-pyqt4/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/qscintilla/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* dont install source tree under prefix
* remove duplicate line
* use os.path.join instead of +
* separate build and run environment setups
* flake8
* Update var/spack/repos/builtin/packages/py-pyqt5/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-pyqt5/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-pyqt5/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* fix rsrc path
* use python_include_dir
* use "with working_dir"
* Update var/spack/repos/builtin/packages/py-pyqt4/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-pyqt5/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-pyqt5/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-pyqt5/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/qscintilla/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-pyqt4/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-pyqt4/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* flake8
* package/geopm: Added versions 1.0.0 and 1.1.0
Added changes for 1.1.0 and 1.0.0 in this patch.
Patch for 1.0.0 was previously not merged.
variant for hwloc removed since that is not a dependency since 0.5.1 and
variant('hwloc', when=:0.5.1 is not supported afaik.
made depends_on versions more explicit.
* package/geopm: removed 1.0.0 release candidates 1 and 2.
* Adding final bug-releases for the gromacs-2016 and -2018
* Added newer versions of plumed and libmatheval not a dependency >v2.5
* plumed package: chamge name git branch to master
Libbsd assumes GCC-defined compiler macros:
```
In file included from nlist.c(44):
local-elf.h(238): catastrophic error: #error directive: Unknown ELF machine type
#error Unknown ELF machine type
^
```
The `__amd64__` and `__x86_64__` macros should be equivalent, but the
latter is defined by intel.
* Update MVAPICH2 package for 2.3.2 release
Update default build from psm to mrail
* Update different provides for older versions based on feedback from Todd Gamblin
* Simplify rule so one rule covers 2.1 and 2.2
* Add support for disabling rpath based on feedback from Dr. Shende
* Add colon based on comment
* Address review comment by Adam Stewart
* Add declaration of the wrapperpath variant.
- Thanks to Massimiliano Culpo for the comment
* superlu_dist: fix build with xl compilers
* fix link error ../SRC/libsuperlu_dist.so.6.1.1: undefined reference to `ztrtri_'
* Fixed the ordering of the spec on the xl-611 patch.
* fix flake8 error
* Update nlopt package to add Python bindings to PYTHONPATH
* Use extends for nlopt/python fix
* nlopt - change develop to master and add python dep qualifiers
* athena: updated api call to setup build environment
* mvapich2: updated api call to setup build and run environment
* spectrum-mpi: updated api call to setup build and run environment
- depends on spfft starting from 6.4.0
- add magma variant
- avoid setting cuda_arch to none
- add python dependencies
- use release as default build type
* Adding in HMPT package for HPE MPI libraries
* Updating copyright dates
* Renaming HPE MPI package
* Fixing error in package file
* Tidying up defintions and linting
* liniting
* Adding in library setup so packages that want to manually add mpi libraries can do so (i.e. npb)
* Linting
* Linting
* Investigating old API errors
* Investigating api errors
* Investigating api errors
* Investigating api errors
* Investigating api errors
* Investigating api errors: adding back in functions to see when the build fails
* Investigating api errors: adding back in functions to see when the build fails
* Investigating api errors: adding back in functions to see when the build fails
* Investigating api errors: adding back in functions to see when the build fails
* Investigating api errors: adding back in functions to see when the build fails
* Linting
* Linting
* Fixing
* Fixing
* Add new strumpack version (3.2.0), with new
dependency on ButterflyPACK.
* add ButterflyPACK version 1.1.0
* Add strumpack version 3.3.0, add dependency on ButterflyPACK 1.1.0
* Sort ButterflyPACk versions from newest to oldest
* Add a shared variant for STRUMPACK
* Also allow possible newer versions of ButterflyPACK
* New Package: py-pyside2
https://wiki.qt.io/Qt_for_Python
The Qt for Python project aims to provide a complete port of the PySide module
to Qt 5. The development started on GitHub in May 2015. The project managed to
port Pyside to Qt 5.3, 5.4 & 5.5. During April 2016 The Qt Company decided to
properly support the por
* Address review comments:
+ Add a variant for `+doc` and only depned on some packages if this variant is
active.
+ Enable building the tests if requested.
+ Correct registered required verions for python and qt.
* Remove dead code, fix depends_on command args.
* fix one more flake8 issue.
* One more fix to arguments and change version name to .
* Add a variant for tests and parallelize builds
- Fix a bug with boost defaulting to cxxstd=98 when cxxstd=11 is the
minimum for hpx
- Disable tests by default and use a variant to enable them if requested
- Enable parallel builds: each process takes up to 1Gb when tests are
not enabled.
* Remove tests variant
- The variant doesn't change what gets installed. Testing can be
activated using `spack install --test=root hpx`
* Propagate MPI option in VTK to NetCDF
This fixes a conflict message reads as though NetCDF always requires
hdf5+mpi. It allows `visit~mpi` to resolve correctly without an
additional `^netcdf~mpi`.
* Tell VisIt not to look for 'hdf5_mpi' library
- patched versions are located in the same directory as the
original release. For example, 1906_191103 is located in
the 'v1906/' directory, not in 'v1906_191103/'.
- add master branch as a known version
* package py-zc-buildout
* package py-zc-buildout
* Update var/spack/repos/builtin/packages/py-zc-buildout/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-zc-buildout/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* license bits
* Update var/spack/repos/builtin/packages/py-zc-buildout/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* package py-cherrypy
* package py-cherrypy
* autopep8, docutils cleanup
* Update var/spack/repos/builtin/packages/py-cherrypy/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-cherrypy/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-cherrypy/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* portend depends on tempora, not cherrypy directly
* setuptools_scm bits
* dependency one level up
* license bits
* Update var/spack/repos/builtin/packages/py-cherrypy/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* package py-tempora
* package py-tempora
* Update var/spack/repos/builtin/packages/py-tempora/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* missing deps
* Update var/spack/repos/builtin/packages/py-tempora/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-tempora/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-tempora/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* license bits
* (py)arrow: new versions
* move py-arrow source to github as not all versions are on pypi
same checksum as pypi, adding build_directory
* move back to pypi sources
* drop 0.15.0 and 0.14.1 as only .whl are available on pypi
* add new dependencies
* Update var/spack/repos/builtin/packages/py-pyarrow/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* py-jupyter-core add new version and setuptools dependency
* update checksums to use pypi
* fixup url and python dep type
* Update var/spack/repos/builtin/packages/py-jupyter-core/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* new package: py-dateparser
* take setup.py dependencies into account
* fixup help->description
* reorder dependencies
* drop version constraints not enforced in setup.py
netcdf-fortran@4.5: will error if netcdf-c has been built with MPI
support:
```
configure: error:
-----------------------------------------------------------------------
The NetCDF C library is built with parallel I/O feature enabled, but
the Fortran compiler '.../lib/spack/env/gcc/gfortran' supplied in this configure command
does not support MPI-IO. Please use one that does. If parallel I/O
feature is not desired, please use a NetCDF C library with parallel
I/O feature disabled. Abort.
-----------------------------------------------------------------------
```
Copy logic from netcdf-c to add an `mpi` variant.
* pybind11: test get_include path
Helper for non-CMake downstream projects to find the pybind11
header location.
* pybind11: return proper get_include()
use our prefix instead of letting pybind11 trying to self-determine
it from given conda/virtualenv/global rules.
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* new package: py-ics
* drop 0.5 and move to tar-ball
* Update var/spack/repos/builtin/packages/py-ics/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* Update var/spack/repos/builtin/packages/py-ics/package.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* mpi4py 3.0.3
Adds support for Python 3.8 with new Cython files.
I tried to build 3.0.0 with Python 3.8 and this builds as well,
therefor I added no conflict.
* mpi4py: update dependency version ranges
* update py-jupyter-notebook
* add setuptools dependency for newer version
the whole jupyter collection seems to use setuptools in case of
certain setup.py-arguments from the very beginning. However the latest
ones actually require it, otherwise the build will fail
* add newly introduced dependencies
* dependency constraints
* drop terminal variant and update python dep
* added relion 3.0.8 [latest stable version in 3.0 branch] as well as 3.1_beta
* relion 3.1 beta compiles without Benchmarking build type see https://github.com/3dem/relion/issues/533
* relion 3.0.X - 3.1 now supports latest cmake@3
