CMake may write and read from `~/.cmake` through `export(...)` and read `find_package(...)` respectively. We don't want this as it may influence the build in a non-deterministic way, so disable it for all versions of `cmake`.
Fixes a bug where Spack did not generate module files of non-roots during
spack install with an active environment.
The reason being that Environment.new_installs only contained roots.
This PR:
Drops special casing of automatic module generation in post-install hooks
When `use_view`, compute environment variable modifications like always, and
applies a view projection to them afterwards, like we do for spack env activate.
This ensures we don't have to delay module generation until after the view is
created.
Fixes another bug in use_view where prefixes of dependencies would not be
projected -- previously Spack would only temporarily set the current spec's prefix.
Removes the one and only use of the post_env_write hook (but doesn't drop it to
make this backportable w/o changes)
Previously `std_args` was called on non-roots in a build context, which is redundant, and also leads to issues when `std_args` expects build deps of the `pkg` to be installed.
* Environments: fix environment config
* Don't change the lockfile manifest path
* Update activate's comments to tie the manifest to the configuration
* Add spec_list override method
* Remove type checking from 'activate' since already have built-in check
* Refactor global methods tied to the manifest to be in its class
* Restore Environment's 'env_subdir_path' and pass its config_stage_dir to EnvironmentManifestFile
* Restore global env_subdir_path for use by Environment and EnvironmentManifestFile
Currently requirements allow to express "strong preferences" and "conflicts" from
configuration using a convoluted syntax:
```yaml
packages:
zlib-ng:
require:
# conflict on %clang
- one_of: ["%clang", "@:"]
# Strong preference for +shared
- any_of: ["+shared", "@:"]
```
This PR adds syntactic sugar so that the same can be written as:
```yaml
packages:
zlib-ng:
conflict:
- "%clang"
prefer:
- "+shared"
```
Preferences written in this way are "stronger" that the ones documented at:
- https://spack.readthedocs.io/en/latest/packages_yaml.html#package-preferences
`spack install` early exit behavior was sometimes convenient, except
that it had and has bugs:
1. prior bug: we didn't mark env roots of already installed specs as
explicit in the db
2. current bug: `spack install --overwrite` is ignored
So this PR simplifies by letting the installer do its thing even if
everything is supposedly installed.
This commit ensures that CMake packages that also have Python as a build/link dep get a couple defines for the Python path so that CMake's builtin `FindPython3`, `FindPython`, `FindPythonInterp` modules can locate Python correctly.
The main problem with those CMake modules is that they first search for Python versions known at the time of release, meaning that old CMake maybe find older system Python 3.8 even though Python 3.11 comes first in `CMAKE_PREFIX_PATH` and `PATH`.
Package maintainers can opt out of this by overriding the `find_python_hints = False` attribute in the package class.
The piece of code that is removed in this PR predates environment views.
Spack would symlink build logs in `<env>/.spack-env/logs/*`, but this is
redundant because:
1. Views already add `<prefix>/.spack` (and there's logic there to avoid
clashes)
2. The code was broken anyways: it would only symlink the logs of
environment roots, not their deps, even if they were just built.
If users disable views, I'm pretty sure they're not waiting for
`.spack-env/logs` either. So, imo we can delete this code, and it was
probably overlooked in the past.
For a requirement like
```
packages:
foo:
require:
- "+debug"
```
(not `one_of:`, `any_of:`, or `spec:`)
`spack config change` would ignore the string. This was particularly evident if toggling a variant for a previously unmentioned package:
```
$ spack config change packages:foo:require:+debug
$ spack config change packages:foo:require:~debug
```
This fixes that and adds a test for it.
* Reduce the size on disk for logs
This PR does two things:
1. Store a compressed `spack-build-out.txt.gz`
2. Get rid of phase logs, as they are duplicates of
`spack-build-out.txt`
The logs are not compressed in the stage dir, so on build failure the
workflow for users is no different.
It's just that on install the logs are rarely used, and if needed, users
can easily `gzip -d` or `zgrep` them.
In the case of GCC installs, the compressed logs are <5% of the original
size, which is typically dozens of MBs.
* get rid of "backwards compat" of file names in stage dirs
Sbangs don't exist on Native Windows, and the hook is causing errors
due to the file comparison + behavior of os.rename on Windows. Skip
the hook on Windows.
Like `spack change` for specs in environments, this can e.g. replace `examplespec+debug` with `examplespec~debug` in a `require:` section.
Example behavior for a config like:
```
packages:
foo:
require:
- spec: +debug
```
* `spack config change packages:foo:require:~debug` replaces `+debug` with `~debug`
* `spack config change packages:foo:require:@1.1` adds a requirement to the list
* `spack config change packages:bar:require:~debug` adds a requirement
As observed in #40944, when using `spack config add <path>`, the `path` might
contain keys that are enclosed in quotes.
This was broken in https://github.com/spack/spack/pull/39831, which assumed that
only the value (if present, the final element of the path) would use quotes.
This preserves the primary intended behavior of #39931 (allowing ":" in values when
using `spack config add`) while also allowing quotes on keys.
This has complicated the function `process_config_path`, but:
* It is not used outside of `config.py`
* The docstring has been updated to account for this
* Created an object to formalize the DSL, added a test for that, and
refactored parsing to make use of regular expressions as well.
* Updated the parsing and also updated the `config_path_dsl` test with an explicit check.
At a higher level, split the parsing to check if something is either a key or not:
* in the first case, it is covered by a regex
* in the second, it may be a YAML value, but in that case it would have to be the last
entry of x:y:z, so in that case I attempt to use the YAML handling logic to parse it as such
Spack packages may not have a public download option, and can implement
`download_instr` to inform users how to obtain the artifacts needed to
build. `spack checksum` however did not account for this and would print
out a confusing error message when invoked on such packages ("Could not
find any remote versions").
This PR updates the error message to output the manual download instructions
if `spack checksum` is invoked on a package with `manual_download = True`.
Currently when you repeatedly create a bootstrap mirror that includes
`clingo-bootstrap@spack` you get different tarballs every time.
This is a general problem with mirroring checkouts from version control
as tarballs. I think it's best to create tarballs ourselves, since that way we
have more control over its contents.
This PR ensures normalized tarballs like we do for build caches:
- normalize file permissions (in fact that was already inspired by git, so
should be good)
- normalized file creation/modification time (timestamp 0)
- uid / guid = 0, no usernames
- normalized gzip header
- dir entries are ordered by `(is_dir, name)` where strings are not locale aware ;)
- POSIX says st_mode of symlinks is unspecified, so work around it and
force mode to `0o755`
Explicitly requested namespaces are annotated during
the setup phase, and used to retrieve the correct package
class.
An attribute for the namespace has been added for each node.
Currently, a single namespace per package is allowed
during concretization.
Add `--create` option to `env activate` to allow users to create and activate in one command.
---------
Co-authored-by: Wouter Deconinck <wdconinc@gmail.com>
Co-authored-by: Tamara Dahlgren <35777542+tldahlgren@users.noreply.github.com>
Co-authored-by: psakievich <psakievich@users.noreply.github.com>
* Bump the build cache layout version from 1 to 2
* Version to lists parent directories of the prefix in the tarball too, which is required from some container runtimes
* Move in vs. satisfies to a note and mention special cases of in
* Address feedback: oveoverlap -> intersect
* Re-word the satisfies versus in note.
---------
Co-authored-by: Massimiliano Culpo <massimiliano.culpo@gmail.com>
This fixes an issue where pkg.stage throws because a patch cannot be found,
but the patch is redundant because the spec is reused from a build cache and
will be installed from existing binaries.
Part 4 of reworking all package metadata to key by `when` conditions.
Changes conflict dictionary structure from this:
{ provided_spec: {when_spec, ...} }
to this:
{ when_spec: {provided_spec, ...} }
`make_when_spec()` was being used in the solver, but it has semantics that are specific
to parsing when specs from `package.py`. In particular, it returns `None` when the
`when` spec is `False`, and directives are responsible for ignoring that case and not
adding requirements, deps, etc. when there's an actual `False` passed in from
`package.py`.
In `asp.py`, we know that there won't ever be a raw boolean when spec or constraint, so
we know we can parse them without any of the special boolean handling. However, we
should report where in the file the error happened on error, so this adds some parsing
logic to extract the `mark` from YAML and alert the user where the bad parse is.
- [x] refactor `config.py` so that basic `spack_yaml` mark info is in its own method
- [x] refactor `asp.py` so that it uses the smarter YAML parsing routine
- [x] refactor `asp.py` so that YAML input validation for requirements is done up front
Part 3 of reworking all package metadata to key by `when` conditions.
Changes conflict dictionary structure from this:
{ (requirement_spec, ...): [(when_spec, policy, msg)] }
to this:
{ when_spec: [((requirement_spec, ...), policy, msg), ...] }
Part 2 of reworking all package metadata to key by `when` conditions.
Changes conflict dictionary structure from this:
{ conflict_spec: [(when_spec, msg), ...] }
to this:
{ when_spec: [(conflict_spec, msg), ...] }
Also attempts to consistently name the variables used to iterate over conflict
dictionaries.
Part 1 of making all package metadata indexed by `when` condition. This
will allow us to handle all the dictionaries on `PackageBase` consistently.
Convert the current dependency dictionary structure from this:
{ name: { when_spec: [Dependency ...] } }
to this:
{ when_spec: { name: [Dependency ...] } }
On an M1 mac, this actually shaves 5% off the time it takes to load all
packages, I think because we're able to trade off lookups by spec key
for more lookups by name.
Needed for #40326, which can changes the iteration order over package dependencies during concretization.
While clingo doesn't have this problem, the original concretizer (which we still use for bootstrapping) can be sensitive to iteration order when evaluating dependency constraints in `when` conditions. This can cause it to ignore conditional dependencies unless the dependencies in the condition are listed first in the package.
The issue was in the way the original concretizer would disconnect specs *every* time `normalize()` ran. When specs were disconnected, `^dependency` constraints wouldn't see the dependency in the dependency condition loop.
We now only only disconnect *all* dependencies at the start of `concretize()` and `normalize()`, and we disconnect any leftover dependents from replaced externals at the *end* of `normalize()`. This trims stale connections while keeping the ones that are needed to trigger dependency conditions.
- [x] refactor `flat_dependencies()` to not disconnect the spec by default.
- [x] `flat_dependencies()` is never called with `copy=True` -- remove the `copy` kwarg.
- [x] disconnect only once at the beginning of `normalize()` or `concretize()`.
- [x] add a test that perturbs dependency iteration order to ensure this doesn't regress.
- [x] disconnect unused dependents at end of `normalize()`
This adds options to `spack list` that allow you to list only packages from specific
repositories/namespaces, e.g.:
```console
spack list -r builtin
```
only lists packages from the `builtin` repo, while:
```console
spack list -r myrepo -r myrepo2
```
would list packages from `myrepo` and `myrepo2`, but not from `builtin`. Note that you
can use the same argument multiple times.
You can use either `-r` / `--repo` or `-N` / `--namespace`. `-N` is there to match the
corresponding option on `spack find`.
- [x] add `-r` / `--repo` / `-N` / `--namespace` argument
- [x] add test
This method is vestigial; the only arg we ever used was `ignore=`, and that was
eliminated in #29317 and #35588.
The `kwargs` field of the extensions dictionary is actually completely unused now. Add a
note for future removal.
Literal compiler config in `test_requires_directive` specifically lists `target:
x86_64`, but it doesn't need to, and the unnecessary target makes the test fail on
non-`x86_64` machines.
- [x] Remove target from config yaml in `test_requires_directive`
