This moves our `mypy` configuration from `.mypy.ini` to `.pyproject.toml`
and increases the minimum `mypy` version in the tests.
- [x] move `mypy` configuration to `pyproject.toml`
- [x] remove `.mypy.ini`
- [x] ensure that `mypy` version .900 or higher is used in tests
* fix remaining flake8 errors
* imports: sort imports everywhere in Spack
We enabled import order checking in #23947, but fixing things manually drives
people crazy. This used `spack style --fix --all` from #24071 to automatically
sort everything in Spack so PR submitters won't have to deal with it.
This should go in after #24071, as it assumes we're using `isort`, not
`flake8-import-order` to order things. `isort` seems to be more flexible and
allows `llnl` mports to be in their own group before `spack` ones, so this
seems like a good switch.
`dateutil.parser` was an optional dependency for CVS tests. It was failing on macOS
beacuse the dateutil types were not being installed, and mypy was failing *even when the
CVS tests were skipped*. This seems like it was an oversight on macOS --
`types-dateutil-parser` was not installed there, though it was on Linux unit tests.
It takes 6 lines of YAML and some weird test-skipping logic to get `python-dateutil` and
`types-python-dateutil` installed in all the tests where we need them, but it only takes
4 lines of code to write the date parser we need for CVS, so I just did that instead.
Note that CVS date format can vary from system to system, but it seems like it's always
pretty similar for the parts we care about.
- [x] Replace dateutil.parser with a simpler date regex
- [x] Lose the dependency on `dateutil.parser`
* Force the Python interpreter with an env variable
This commit forces the Python interpreter with an
environment variable, to ensure that the Python set
by the "setup-python" action is the one being used.
Due to the policy adopted by Spack to prefer python3
over python we may end up picking a Python 3.X
interpreter where Python 2.7 was meant to be used.
* Revert "Update conftest.py (#24473)"
This reverts commit 477c8ce820.
* Make python-dateutil a soft dependency for unit tests
Before #23212 people could clone spack and run
```
spack unit-tests
```
while now this is not possible, since python-dateutil is
a required but not vendored dependency. This change makes
it not a hard requirement, i.e. it will be used if found
in the current interpreter.
* Workaround mypy complaint
Spack packages can now fetch versions from CVS repositories. Note
this fetch mechanism is unsafe unless using :extssh:. Most public
CVS repositories use an insecure protocol implemented as part of CVS.
This adds RHEL8's `/usr/libexec/platform-python` to Spack's list of preferred
pythons. It will only be used if no other `python` is available in the `PATH`.
We have been testing with this python for a while now, and it seems to do all
that we need. If Spack one day isn't able to work with it, we'll take it out,
but for now it is useful to allow Spack to be used on RHEL8 without a dedicated
`python` installation.
Clingo has been released on PyPI, so there
are no more concerns on our CI depending
on pypy.test for installing the wheel.
Apparently we have parts of Spack which
are not compatible with kcov > 3.4
* QA: reduce number of unit tests for jobs not in the matrix
* Fixup for CentOS6 dependencies
* Put correct conditions back in place
* Add dependency on changes
PRs that change only package recipes will only run tests under "package_sanity.py" and without coverage. This should result in a huge drop the cpu-time spent in CI for most PRs.
* unit tests: mark slow tests as "maybeslow"
This commit also removes the "network" marker and
marks every "network" test as "maybeslow". Tests
marked as db are maintained, but they're not slow
anymore.
* GA: require style tests to pass before running unit-tests
* GA: make MacOS unit tests fail fast
* GA: move all unit tests into the same workflow, run style tests as a prerequisite
All the unit tests have been moved into the same workflow so that a single
run of the dorny/paths-filter action can be used to ask for coverage based
on the files that have been changed in a PR. The basic idea is that for PRs
that introduce only changes to packages coverage is not necessary, this
resulting in a faster execution of the tests.
Also, for package only PRs slow unit tests are skipped.
Finally, MacOS and linux unit tests are now conditional on style tests passing
meaning that e.g. we won't waste a MacOS worker if we know that the PR has
flake8 issues.
* Addressed review comments
* Skipping slow tests on MacOS for package only recipes
* QA: make tests on changes correct before merging
* Allow the bootstrapping of clingo from sources
Allow python builds with system python as external
for MacOS
* Ensure consistent configuration when bootstrapping clingo
This commit uses context managers to ensure we can
bootstrap clingo using a consistent configuration
regardless of the use case being managed.
* Github actions: test clingo with bootstrapping from sources
* Add command to inspect and clean the bootstrap store
Prevent users to set the install tree root to the bootstrap store
* clingo: documented how to bootstrap from sources
Co-authored-by: Gregory Becker <becker33@llnl.gov>
There clingo-cffi job has two issues to be solved:
1. It uses the default concretizer
2. It requires a package from https://test.pypi.org/simple/
The former can be fixed by setting the SPACK_TEST_SOLVER
environment variable to "clingo".
The latter though requires clingo-cffi to be pushed to a
more stable package index (since https://test.pypi.org/simple/
is meant as a scratch version of PyPI that can be wiped at
any time).
For the time being run the tests in a container. Switch back to
PyPI whenever a new official version of clingo will be released.
* Support clingo when used with cffi
Clingo recently merged in a new Python module option based on cffi.
Compatibility with this module requires a few changes to spack - it does not automatically convert strings/ints/etc to Symbol and clingo.Symbol.string throws on failure.
manually convert str/int to clingo.Symbol types
catch stringify exceptions
add job for clingo-cffi to Spack CI
switch to potassco-vendored wheel for clingo-cffi CI
on_unsat argument when cffi
I lost my mind a bit after getting the completion stuff working and
decided to get Mypy working for spack as well. This adds a
`.mypy.ini` that checks all of the spack and llnl modules, though
not yet packages, and fixes all of the identified missing types and
type issues for the spack library.
In addition to these changes, this includes:
* rename `spack flake8` to `spack style`
Aliases flake8 to style, and just runs flake8 as before, but with
a warning. The style command runs both `flake8` and `mypy`,
in sequence. Added --no-<tool> options to turn off one or the
other, they are on by default. Fixed two issues caught by the tools.
* stub typing module for python2.x
We don't support typing in Spack for python 2.x. To allow 2.x to
support `import typing` and `from typing import ...` without a
try/except dance to support old versions, this adds a stub module
*just* for python 2.x. Doing it this way means we can only reliably
use all type hints in python3.7+, and mypi.ini has been updated to
reflect that.
* add non-default black check to spack style
This is a first step to requiring black. It doesn't enforce it by
default, but it will check it if requested. Currently enforcing the
line length of 79 since that's what flake8 requires, but it's a bit odd
for a black formatted project to be quite that narrow. All settings are
in the style command since spack has no pyproject.toml and I don't
want to add one until more discussion happens. Also re-format
`style.py` since it no longer passed the black style check
with the new length.
* use style check in github action
Update the style and docs action to use `spack style`, adding in mypy
and black to the action even if it isn't running black right now.
Users can add test() methods to their packages to run smoke tests on
installations with the new `spack test` command (the old `spack test` is
now `spack unit-test`). spack test is environment-aware, so you can
`spack install` an environment and then run `spack test run` to run smoke
tests on all of its packages. Historical test logs can be perused with
`spack test results`. Generic smoke tests for MPI implementations, C,
C++, and Fortran compilers as well as specific smoke tests for 18
packages.
Inside the test method, individual tests can be run separately (and
continue to run best-effort after a test failure) using the `run_test`
method. The `run_test` method encapsulates finding test executables,
running and checking return codes, checking output, and error handling.
This handles the following trickier aspects of testing with direct
support in Spack's package API:
- [x] Caching source or intermediate build files at build time for
use at test time.
- [x] Test dependencies,
- [x] packages that require a compiler for testing (such as library only
packages).
See the packaging guide for more details on using Spack testing support.
Included is support for package.py files for virtual packages. This does
not change the Spack interface, but is a major change in internals.
Co-authored-by: Tamara Dahlgren <dahlgren1@llnl.gov>
Co-authored-by: wspear <wjspear@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Spack creates a separate process to do package installation. Different
operating systems and Python versions use different methods to create
it but up until Python 3.8 both Linux and Mac OS used "fork" (which
duplicates process memory, file descriptor table, etc.).
Python >= 3.8 on Mac OS prefers creating an entirely new process
(referred to as the "spawn" start method) because "fork" was found to
cause issues (in other words "spawn" is the default start method used
by multiprocessing.Process). Spack was dependent on the particular
behavior of fork to replicate process memory and transmit file
descriptors.
This PR refactors the Spack internals to support starting a child
process with the "spawn" method. To achieve this, it makes the
following changes:
- ensure that the package repository and other global state are
transmitted to the child process
- ensure that file descriptors are transmitted to the child process in
a way that works with multiprocessing and spawn
- make all the state needed for the build process and tests picklable
(package, stage, etc.)
- move a number of locally-defined functions into global scope so that
they can be pickled
- rework tests where needed to avoid using local functions
This PR also reworks sbang tests to work on macOS, where temporary
directories are deeper than the Linux sbang limit. We make the limit
platform-dependent (macOS supports 512-character shebangs)
See: #14102
By default Spack uses the latest (highest version) GCC
compiler available, which might change across updates
of the Github CI environment.
Since a C compiler is always installed and `mpich~fortran`
will result in faster build times, avoid building the FORTRAN
interface as part of the test.
As detailed in https://bugs.python.org/issue33725, starting new
processes with 'fork' on Mac OS is not guaranteed to work in general.
As of Python 3.8 the default process spawning mechanism was changed
to avoid this issue.
Spack depends on the fork-based method to preserve file descriptors
transparently, to preserve global state, and to avoid pickling some
objects. An effort is underway to remove dependence on fork-based
process spawning (see #18205). In the meantime, this allows Spack to
run with Python 3.8 on Mac OS by explicitly choosing to use 'fork'.
Co-authored-by: Peter Josef Scheibel <scheibel1@llnl.gov>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Todd Gamblin <tgamblin@llnl.gov>
Nightly builds with MacOS started failing again
due to an upgrade of the default virtual environment
that now uses Python 3.8
This makes us hit #14102 and every build fails. This
commit should be reverted along with the fix to #14102.
Ci is currently failing on brew update with the error:
```
Error: Cannot install bazelisk because conflicting formulae are installed.
bazel: because Bazelisk replaces the bazel binary
Please `brew unlink bazel` before continuing.
Unlinking removes a formula's symlinks from /usr/local. You can
link the formula again after the install finishes. You can --force this
install, but the build may fail or cause obscure side effects in the
resulting software.
```
Avoiding:
```
$ brew update
$ brew upgrade
```
solves the issue by preventing the risk of conflicting formulae
* Run Python2.6 unit tests on Github Actions
* Skip url tests on Python 2.6 to reduce waiting times
* Skip foreground background tests on Python 2.6 to reduce waiting times
* Removed references to Travis in the documentation
* Deleted install_patchelf.sh (can be installed from repo on CentOS 6)
Style and documentation tests take just a few minutes
to run. Since in Github actions one can't restart a single
job but needs to restart an entire workflow, here we group
tests with similar duration together.
* MacOS build tests
- Run on PR that modify the YAML file of the workflow
- Don't clone Spack, since we are in the Spack repo now
* Try to add opengl to configuration to build jupyter
* fixup
* Move flake8 tests on Github Actions
* Move shell test to Github Actions
* Moved documentation build to Github Action
* Don't run coverage on Python 2.6
Since we get connection errors consistently on Travis
when trying to upload coverage results for Python 2.6,
avoid computing coverage entirely to speed-up tests.
* Added unit tests to Github Actions
* Set user e-mail and name for git tests to succeed
* Simplify setup.sh logic
* Replicate Travis script on Github Actions
* Update flags since '.' is not allowed
* Added badge, simplified workflow
* Remove pinning of coverage
* Remove unit tests run on Github Actions from Travis
