With this change we get the invariant that `mirror.fetch_url` and
`mirror.push_url` return valid URLs, even when the backing config
file is actually using (relative) paths with potentially `$spack` and
`$env` like variables.
Secondly it avoids expanding mirror path / URLs too early,
so if I say `spack mirror add name ./path`, it stays `./path` in my
config. When it's retrieved through MirrorCollection() we
exand it to say `file://<env dir>/path` if `./path` was set in an
environment scope.
Thirdly, the interface is simplified for the relevant buildcache
commands, so it's more like `git push`:
```
spack buildcache create [mirror] [specs...]
```
`mirror` is either a mirror name, a path, or a URL.
Resolving the relevant mirror goes as follows:
- If it contains either / or \ it is used as an anonymous mirror with
path or url.
- Otherwise, it's interpreted as a named mirror, which must exist.
This helps to guard against typos, e.g. typing `my-mirror` when there
is no such named mirror now errors with:
```
$ spack -e . buildcache create my-mirror
==> Error: no mirror named "my-mirror". Did you mean ./my-mirror?
```
instead of creating a directory in the current working directory. I
think this is reasonable, as the alternative (requiring that a local dir
exists) feels a bit pendantic in the general case -- spack is happy to
create the build cache dir when needed, saving a `mkdir`.
The old (now deprecated) format will still be available in Spack 0.20,
but is scheduled to be removed in 0.21:
```
spack buildcache create (--directory | --mirror-url | --mirror-name) [specs...]
```
This PR also touches `tmp_scope` in tests, because it didn't really
work for me, since spack fixes the possible --scope values once and
for all across tests, so tests failed when run out of order.
Packages that use docbook-xml may specify a specific entity version.
When this is specified as a version constraint in the package recipe it
will cause problems when using `unify = True` in a Spack environment, as
there could be multiple versions of docbook-xml in the spec. In
practice, any entity version should work with any other version and
everything should work with the latest version. This PR maps all Spack
docbook-xml entity versions to the docbook-xml version in the spec.
Ideally, the version in the spec would be the latest version. With this
PR, even if a package specifies an older entity version, it will map
to the entity version (latest) in the spec. This means that there can be one
docbook-xml version in a Spack environment spec and packages requesting
older entity versions will still work.
To help facilitate this, docbook-xml version constraints for packages
that have them have been removed. Those packages are dbus and gtk-doc.
What's in AOCL 4.0:
1. amdblis
LPGEMM variants with post-ops support
AMD "Zen4" support for BLIS
2. amdlibflame
Upgrade to LAPACK 3.10.1 specification
Improvements in a few more variants of SVD and Eigen Value routines
Multithread support enabled for selected APIs
3. amdfftw
AVX-512 enablement of DFT kernels
AVX-512 optimization of copy and transpose routines
5. amdlibm
Black & Scholes support (logf, expf, erff, both scalar and vector)
AVX-512 variants of vector functions
6. aocl-sparse
New Iterative Solver APIs
AVX-512 support for SPMV API
7. amdscalapack
Upgrade to Netlib ScaLAPACK 2.2.0
Co-authored-by: Massimiliano Culpo <massimiliano.culpo@gmail.com>
Sometimes I just want to know how many packages of a certain type there are.
- [x] add `--count` option to `spack list` that output the number of packages that
*would* be listed.
```console
> spack list --count
6864
> spack list --count py-
2040
> spack list --count r-
1162
```
* Add packages
* Style
* Respond to comments
* Change conflct dep type
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
* paraview: add `rocm` variant
This conflicts with CUDA and requires at least ParaView 5.11.0. More
dependencies are also needed.
* E4S: Add ParaView for ROCm and CUDA stacks
* DAV SDK: Update ParaView version and GPU variants
* Verify using hipcc vs amdclang++ for newer hip
Co-authored-by: Ben Boeckel <ben.boeckel@kitware.com>
* adding 1st version of py-strawberryfields
* py-strawberryfields: minor edit
* added backbone for 4x new SF dependencies
* edits to SF and its 4x new deps
* added all deps for SF
* added one version to py-lark-parser
* py-quantum-xir with tarball from github
* Update var/spack/repos/builtin/packages/py-strawberryfields/package.py
Co-authored-by: Tamara Dahlgren <35777542+tldahlgren@users.noreply.github.com>
* updated version for py-quantum-xir : pypy fixed
* py-pennylane: added pythonpackage.maintainers, too
Co-authored-by: Tamara Dahlgren <35777542+tldahlgren@users.noreply.github.com>
Currently, all of the replacements in `spack.util.path.replacements()` get evaluated for
each replacement. This makes it easy to get bootstrap issues, because config is used
very early on in Spack.
Right now, if I run `test_autotools_gnuconfig_replacement_no_gnuconfig` on my M1 mac, I
get the circular reference error below. This fixes the issue by making all of the path
replacements lazy lambdas.
As a bonus, this cleans up the way we do substitution for `$env` -- it's consistent with
other substitutions now.
- [x] make all path `replacements()` lazy
- [x] clean up handling of `$env`
```console
> spack unit-test -k test_autotools_gnuconfig_replacement_no_gnuconfig
...
==> [2022-12-31-15:44:21.771459] Error: AttributeError:
The 'autotools-config-replacement' package cannot find an attribute while trying to build from sources. This might be due to a change in Spack's package format to support multiple build-systems for a single package. You can fix this by updating the build recipe, and you can also report the issue as a bug. More information at https://spack.readthedocs.io/en/latest/packaging_guide.html#installation-procedure
/Users/gamblin2/src/spack/lib/spack/spack/package_base.py:1332, in prefix:
1330 @property
1331 def prefix(self):
>> 1332 """Get the prefix into which this package should be installed."""
1333 return self.spec.prefix
Traceback (most recent call last):
File "/Users/gamblin2/src/spack/lib/spack/spack/build_environment.py", line 1030, in _setup_pkg_and_run
kwargs["env_modifications"] = setup_package(
^^^^^^^^^^^^^^
File "/Users/gamblin2/src/spack/lib/spack/spack/build_environment.py", line 757, in setup_package
set_module_variables_for_package(pkg)
File "/Users/gamblin2/src/spack/lib/spack/spack/build_environment.py", line 596, in set_module_variables_for_package
m.std_cmake_args = spack.build_systems.cmake.CMakeBuilder.std_args(pkg)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/Users/gamblin2/src/spack/lib/spack/spack/build_systems/cmake.py", line 241, in std_args
define("CMAKE_INSTALL_PREFIX", pkg.prefix),
^^^^^^^^^^
File "/Users/gamblin2/src/spack/lib/spack/spack/package_base.py", line 1333, in prefix
return self.spec.prefix
^^^^^^^^^^^^^^^^
File "/Users/gamblin2/src/spack/lib/spack/spack/spec.py", line 1710, in prefix
self.prefix = spack.store.layout.path_for_spec(self)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/Users/gamblin2/src/spack/lib/spack/spack/directory_layout.py", line 336, in path_for_spec
path = self.relative_path_for_spec(spec)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/Users/gamblin2/src/spack/lib/spack/spack/directory_layout.py", line 106, in relative_path_for_spec
projection = spack.projections.get_projection(self.projections, spec)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/Users/gamblin2/src/spack/lib/spack/spack/projections.py", line 13, in get_projection
if spec.satisfies(spec_like, strict=True):
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/Users/gamblin2/src/spack/lib/spack/spack/spec.py", line 3642, in satisfies
if not self.virtual and other.virtual:
^^^^^^^^^^^^
File "/Users/gamblin2/src/spack/lib/spack/spack/spec.py", line 1622, in virtual
return spack.repo.path.is_virtual(self.name)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/Users/gamblin2/src/spack/lib/spack/spack/repo.py", line 890, in is_virtual
return have_name and pkg_name in self.provider_index
^^^^^^^^^^^^^^^^^^^
File "/Users/gamblin2/src/spack/lib/spack/spack/repo.py", line 770, in provider_index
self._provider_index.merge(repo.provider_index)
^^^^^^^^^^^^^^^^^^^
File "/Users/gamblin2/src/spack/lib/spack/spack/repo.py", line 1096, in provider_index
return self.index["providers"]
~~~~~~~~~~^^^^^^^^^^^^^
File "/Users/gamblin2/src/spack/lib/spack/spack/repo.py", line 592, in __getitem__
self._build_all_indexes()
File "/Users/gamblin2/src/spack/lib/spack/spack/repo.py", line 607, in _build_all_indexes
self.indexes[name] = self._build_index(name, indexer)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/Users/gamblin2/src/spack/lib/spack/spack/repo.py", line 616, in _build_index
index_mtime = self.cache.mtime(cache_filename)
^^^^^^^^^^^^^^^^
File "/Users/gamblin2/src/spack/lib/spack/llnl/util/lang.py", line 826, in __getattr__
return getattr(self.instance, name)
^^^^^^^^^^^^^
File "/Users/gamblin2/src/spack/lib/spack/llnl/util/lang.py", line 825, in __getattr__
raise AttributeError()
AttributeError
```
* Added support for libfabric to find an external installation and
identify variants supported.
* Change the fabrics definition to only include CXI when on a cray
system with a libfabric-based slingshot network.
* Added a conflict when trying to build the CXI fabric value since it is
only available as closed source at this time.
#33128 Introduces a dependency on re2c into the Ninja build recipe.
This is problematic on Windows as we use CMake to build re2c, and
Ninja to drive the CMake build. This PR resolves this issue by
adding a variant to toggle the use of re2c with ninja.
* Added a more robust check for an external version of the library.
Included a guard to identify when the library gives no discernible
version information and then to substitute with "unknown_ver"
identifier.
