* Add pmi support (required by ucx, ofi, and gni backends)
* Add support for ucx backend
* Add dependency on MPI for pmi=simplepmi, slurmpmi, or slurmpmi2
* Remove charmpp as an MPI provider since the changes in this PR can
add MPI as a dependency (mentioned previously)
* Install into transport_protocol-OS-arch subdirectory to match
default charmpp installation behavior (which helps dependents find it)
- add docstrings and make parameter names consistent in `relocate.py`
- Make `replace_prefix_*` and other functions private (as they are implementation details)
- remove unused function _replace_prefix_nullterm()
- Add unit tests for `relocate.py` functions
- add patchelf to Travis and use it during tests
- add hello_world fixture with a compiled binary, so we can test relocation
After migrating to `travis-ci.com`, we saw I/O issues in our tests --
tests that relied on `capfd` and `capsys` were failing. We've also seen
this in GitHub actions, and it's kept us from switching to them so far.
Turns out that the issue is that using streams like `sys.stdout` as
default arguments doesn't play well with `pytest` and output redirection,
as `pytest` changes the values of `sys.stdout` and `sys.stderr`. if these
values are evaluated before output redirection (as they are when used as
default arg values), output won't be captured properly later.
- [x] replace all stream default arg values with `None`, and only assign stream
values inside functions.
- [x] fix tests we didn't notice were relying on this erroneous behavior
This adds the `url` alternative `urls` to `package.all_urls`. With
this addition, one can find again new versions with
`spack versions <package>` for packages that are populated with
from mixin mirror `urls`.
Example: `util-macros` from x.org mixin.
* Non-interactive mode for spack checksum; allow passing 'package@version' to spack checksum
* Flake8 fixes
* Update checksum.py
Fix typo
* Update spack-completion script
* Automatically set non-interactive mode if more than one version passed
* Update lib/spack/spack/cmd/checksum.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* Add documentation and update spack-completion
* Flake8
* Rename option
* Update spack-completion
* Update lib/spack/spack/cmd/checksum.py
Co-Authored-By: Adam J. Stewart <ajstewart426@gmail.com>
* Update checksum.py
* Update stage.py
* Update create.py
Use batch mode when adding a new package
Co-authored-by: Ivan Razumov <ivan.razumov@cern.ch>
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
This fixes some errors with setting up test configuration. These
errors do not cause current Spack tests to fail but do create
red herring issues elsewhere (see #15666). Fixing these errors
leads to more errors in tests that depended on the original
misconfigured state, so those are also addressed here.
This is an update to #16003 which accounts for some unit tests with
conflicting config/mutable_config fixtures. These conflicts were
not exposed until the mutable_config fixture was fixed. Details are
included below. The change which builds on #16003 is prefixed with
"(new)".
* For tests that use the real Spack package repository, the config
needs to avoid using MPI providers that are not intended to be
installed by Spack. Without this, it is possible that Spack tests
which concretize the MPI virtual will end up trying to use an
implementation that it shouldn't (e.g. one that is always
provided externally). See #15666 for an example.
* The mutable_config test fixture was not initializing the scope
roots to the right directories (so the resulting config was empty).
* The current_host fixture in the concretize.py tests was using the
config fixture rather than mutable_config, and was polluting the
config cache for other tests.
* One test in concretize.py was clearing a nonexistent cache
(PackagePrefs._packages_config_cache). This reference has been
removed.
* The test 'test_preferred_compilers' was was depending on cross
test config pollution to succeed. The initial spec before
concretization has been updated to updated to be explicit about
the desired result.
* (new) For tests that use install_mockery and mutable_config,
replace install_mockery with a separate install_mockery_mutable_config
fixture that is exactly the same as install_mockery but uses the
mutable_config fixture to avoid conflicts.
Fixed#15884.
Spack asks every package linked into an environment to tell us how
environment variables should be modified when a spack environment is
activated. As part of this, specs in an environment are symlinked into
the environment's view (see #13249), and the package calculates
environment modifications with *the default view as the prefix*.
All of this works nicely for pointing the user's environment at the view
*if* every package is successfully linked. Unfortunately, right now we
only track what specs "should" be in a view, not which specs actually
are. So we end up calculating environment modifications on things that
aren't linked into thee view, and the exception isn't caught, so lots of
spack commands end up failing.
This fixes the issue by ignoring and warning about specs where
calculating environment modifications fails. So we can still keep using
Spack even if the current environment is incomplete.
We should probably also just avoid computing env modifications *entirely*
for unlinked packages, but right now that is a slow operation (requires a
lot of YAML parsing). We should revisit that when we have some better
state management for views, but the fix adopted here will still be
necessary, as we want spack commands to be resilient to other types of
bugs in `setup_run_environment()` and friends. That code is in packages
and we have to assume it could be buggy when we call it outside of builds
(as it might fail more than just the build).
Add a `spack external find` command that tries to populate
`packages.yaml` with external packages from the user's `$PATH`. This
focuses on finding build dependencies. Currently, support has only been
added for `cmake`.
For a package to be discoverable with `spack external find`, it must define:
* an `executables` class attribute containing a list of
regular expressions that match executable names.
* a `determine_spec_details(prefix, specs_in_prefix)` method
Spack will call `determine_spec_details()` once for each prefix where
executables are found, passing in the path to the prefix and the path to
all found executables. The package is responsible for invoking the
executables and figuring out what type of installation(s) are in the
prefix, and returning one or more specs (each with version, variants or
whatever else the user decides to include in the spec).
The found specs and prefixes will be added to the user's `packages.yaml`
file. Providing the `--not-buildable` option will mark all generated
entries in `packages.yaml` as `buildable: False`
Cray has two machine types. "XC" machines are the larger
machines more common in HPC, but "Cluster" machines are
also cropping up at some HPC sites. Cluster machines run
a slightly different form of the CrayPE programming environment,
and often come without default modules loaded. Cluster
machines also run different versions of some software, and run
a linux distro on the backend nodes instead of running Compute
Node Linux (CNL).
Below are the changes made to support "Cluster" machines in
Spack. Some of these changes are semi-related general upkeep
of the cray platform.
* cray platform: detect properly after module purge
* cray platform: support machines running OSs other than CNL
Make Cray backend OS delegate to LinuxDistro when no cle_release file
favor backend over frontend OS when name clashes
* cray platform: target detection uses multiple strategies
This commit improves the robustness of target
detection on Cray by trying multiple strategies.
The first one that produces results wins. If
nothing is found only the generic family of the
frontend host is used as a target.
* cray-libsci: add package from NERSC
* build_env: unload cray-libsci module when not explicitly needed
cray-libsci is a package in Spack. The cray PrgEnv
modules load it implicitly when we set up the compiler.
We now unload it after setting up the compiler and
only reload it when requested via external package.
* util/module_cmd: more robust module parsing
Cray modules have documentation inside the module
that is visible to the `module show` command.
Spack module parsing is now robust to documentation
inside modules.
* cce compiler: uses clang flags for versions >= 9.0
* build_env: push CRAY_LD_LIBRARY_PATH into everything
Some Cray modules add paths to CRAY_LD_LIBRARY_PATH
instead of LD_LIBRARY_PATH. This has performance benefits
at load time, but leads to Spack builds not finding their
dependencies from external modules.
Spack now prepends CRAY_LD_LIBRARY_PATH to
LD_LIBRARY_PATH before beginning the build.
* mvapich2: setup cray compilers when on cray
previously, mpich was the only mpi implementation to support
cray systems (because it is the MPI on Cray XC systems).
Cray cluster systems use mvapich2, which now supports cray
compiler wrappers.
* build_env: clean pkgconf from environment
Cray modules silently add pkgconf to the user environment
This can break builds that do not user pkgconf.
Now we remove it frmo the environment and add it again if it
is in the spec.
* cray platform: cheat modules for rome/zen2 module on naples/zen node
Cray modules for naples/zen architecture currently specify
rome/zen2. For now, we detect this and return zen for modules
named `craype-x86-rome`.
* compiler: compiler default versions
When detecting compiler default versions for target/compiler
compatibility checks, Spack previously ran the compiler without
setting up its environment. Now we setup a temporary environment
to run the compiler with its modules to detect its version.
* compilers/cce: improve logic to determine C/C++ std flags
* tests: fix existing tests to play nicely with new cray support
* tests: test new functionality
Some new functionality can only be tested on a cray system.
Add tests for what can be tested on a linux system.
Co-authored-by: Massimiliano Culpo <massimiliano.culpo@gmail.com>
Since #9481 Python's None is not permitted as a value for
MV variants. The string 'none' is used instead.
Add the same fix for the amgx and lammps packages
If spack is checked out in a git worktree (see [1]), all git-related
commands fail because the `spack_is_git_repo()`-check is not thorough
enough.
When developing in a feature-branch in a seperate worktree, this is
annoying as all unittests regarding git-related spack commands fail,
cluttering the test results with false-positives.
[1]: https://git-scm.com/docs/git-worktree
Change-Id: I94b573a2c0e058e9ccc169e7ee6561626fbb06fd
* For tests that use the real Spack package repository, the config
needs to avoid using MPI providers that are not intended to be
installed by Spack. Without this, it is possible that Spack tests
which concretize the MPI virtual will end up trying to use an
implementation that it shouldn't (e.g. one that is always
provided externally). See #15666 for an example.
* The mutable_config test fixture was not initializing the scope
roots to the right directories (so the resulting config was empty).
* The current_host fixture in the concretize.py tests was using the
config fixture rather than mutable_config, and was polluting the
config cache for other tests.
* One test in concretize.py was clearing a nonexistent cache
(PackagePrefs._packages_config_cache). This reference has been
removed.
* The test 'test_preferred_compilers' was was depending on cross
test config pollution to succeed. The initial spec before
concretization has been updated to updated to be explicit about
the desired result.
* dev-build: --drop-in <shell>
Add a `--drop-in <shell>` option to `spack dev-build`.
This option will automatically run a
`spack build-env <spec> -- <shell>` at the end of a `dev-build`, e.g.
to quickly drop-and-devel into a build phase of a package.
Example usage:
```
spack dev-build --before cmake --drop-in bash openpmd-api@develop
```
* build_env: drop in unit test
Co-authored-by: Greg Becker <becker33@llnl.gov>
Generally speaking, errors that are encountered when attempting to load
command extensions now terminate the running Spack instance.
* Added new exceptions `spack.cmd.PythonNameError` and
`spack.cmd.CommandNameError`.
* New functions `spack.cmd.require_python_name(pname)` and
`spack.cmd.require_cmd_name(cname)` check that `pname` and `cname`
respectively meet requirements, throwing the appropriate error if not.
* `spack.cmd.get_module()` uses `require_cmd_name()` and passes through
exceptions from module load attempts.
* `spack.cmd.get_command()` uses `require_cmd_name()` and invokes
`get_module()` with the correct command-name form rather than the
previous (incorrect) Python name.
* Added New exceptions `spack.extensions.CommandNotFoundError` and
`spack.extensions.ExtensionNamingError`.
* `_extension_regexp` has a new leading underscore to indicate expected
privacy.
* `spack.extensions.extension_name()` raises an `ExtensionNamingError`
rather than using `tty.warn()`.
* `spack.extensions.load_command_extension()` checks command source
existence early and bails out if missing. Also, exceptions raised by
`load_module_from_file()` are passed through.
* `spack.extensions.get_module()` raises `CommandNotFoundError` as
appropriate.
* Spack `main()` allows `parser.add_command()` exceptions to cause
program end.
Tests:
* More common boilerplate has been pulled out into fixtures including
`sys.modules` dictionary cleanup and resource-managed creation of a
simple command extension with specified contents in the source file
for a single named command.
* "Hello, World!" test now uses a command named `hello-world` instead of
`hello` in order to verify correct handling of commands with hyphens.
* New tests for:
* Missing (or misnamed) command.
* Badly-named extension.
* Verification that errors encountered during import of a command are
propagated upward.
Co-authored-by: Massimiliano Culpo <massimiliano.culpo@gmail.com>
This PR introduces trivial refactoring in:
- `get_existing_elf_rpaths`
- `get_relative_elf_rpaths`
- `get_normalized_elf_rpaths`
- `set_placeholder`
mainly to be more consistent with practices used in other
parts of the code and to simplify functions locally. It also
adds or reworks unit tests for these functions and extends
their docstrings.
Co-authored-by: Patrick Gartung <gartung@fnal.gov>
Co-authored-by: Peter J. Scheibel <scheibel1@llnl.gov>
Packages in Spack are classes, and we need to be able to execute class
methods on mock packages. The previous design used instances of a single
MockPackage class; this version gives each package its own class that can
spider depenencies. This allows us to implement class methods like
`possible_dependencies()` on mock packages.
This design change moves mock package creation into the
`MockPackageMultiRepo`, and mock packages now *must* be created from a
repo. This is required for us to mock `possible_dependencies()`, which
needs to be able to get dependency packages from the package repo.
Changes include:
* `MockPackage` is now `MockPackageBase`
* `MockPackageBase` instances must now be created with
`MockPackageMultiRepo.add_package()`
* add `possible_dependencies()` method to `MockPackageBase`
* refactor tests to use new code structure
* move package mocking infrastructure into `spack.util.mock_package`,
as it's becoming a more sophisticated class and it gets lots in `conftest.py`
The variants table in `spack info` is cramped, as the *widest* it can be
is 80 columns. And that's actually only sort of true -- the padding
calculation is off, so it still wraps on terminals of size 80 because it
comes out *slightly* wider.
This change looks at the terminal size and calculates the width of the
description column based on it. On larger terminals, the output looks
much nicer, and on small terminals, the output no longer wraps.
Here's an example for `spack info qmcpack` with 110 columns.
Before:
Name [Default] Allowed values Description
==================== ==================== ==============================
afqmc [off] on, off Install with AFQMC support.
NOTE that if used in
combination with CUDA, only
AFQMC will have CUDA.
build_type [Release] Debug, Release, The build type to build
RelWithDebInfo
complex [off] on, off Build the complex (general
twist/k-point) version
cuda [off] on, off Build with CUDA
After:
Name [Default] Allowed values Description
==================== ==================== ========================================================
afqmc [off] on, off Install with AFQMC support. NOTE that if used in
combination with CUDA, only AFQMC will have CUDA.
build_type [Release] Debug, Release, The build type to build
RelWithDebInfo
complex [off] on, off Build the complex (general twist/k-point) version
cuda [off] on, off Build with CUDA
Update compiler config with bootstrapped compiler when it was already installed and added config defaults to code so mutable_config test fixture works.
To specify an environment for a comment, the user can specify
"spack -e <env>". The documentation incorrectly specified "-E" (which
is actually used to ignore any implicit use of environments).
If the Spack compiler wrapper encounters any "-isystem" option, then
when adding include directories for Spack dependencies, Spack will
use "-isystem" instead of "-I". This prevents Spack-generated "-I"
options from overriding the "-isystem" options generated by the build
system. To ensure that build-system "-isystem" directories are
searched first, Spack places all of its inserted "-isystem"
directories after.
The new ordering of -isystem includes is:
* -isystem from build system (not system directories)
* -isystem from Spack
* -isystem from build system (for directories like /usr/include)
The prior order of "-I" arguments is preserved (although as of this
commit Spack no longer generates -I if -isystem is detected):
* -I from build system (not system directories)
* -I from Spack (only if there are no "-isystem" options)
* -I from build system (for directories like /usr/include)
Since #16132, we've consolidated the setting of FORCE_UNSAFE_CONFIGURE to
`autotools.py`, so we don't need to use it in packages like `coreutils`,
in our commands, or in our container recipes.
- [x] Remove FORCE_UNSAFE_CONFIGURE from packages
- [x] Remove FORCE_UNSAFE_CONFIGURE from container recipes
- [x] Remove FORCE_UNSAFE_CONFIGURE from `spack ci` command
This commit sets the `FORCE_UNSAFE_CONFIGURE` environment variable to 1 in autotools builds.
We see a lot of builds popping up and complaining about `FORCE_UNSAFE_CONFIGURE`. This behavior is not actually part of `autoconf` per se. It comes from this patch to `mknod.m4`, which is used by a lot of autoconf builds:
* https://lists.gnu.org/archive/html/bug-gnulib/2010-07/msg00282.html
Which originated from this problem that someone had on AIX:
* https://lists.gnu.org/archive/html/bug-gnulib/2010-07/msg00279.html
The gist of the problem seems to be that they want to check whether `mknod` can do something as root, but instead of checking whether they're running as root and using `su` or something to test this, they just made it harder to run `configure` as root.
This seems very ad hoc and this is one of many checks that are run as root in `configure`. Many of them run before this check, so it's not clear that the `FORCE_UNSAFE_CONFIGURE` thing is even preventing bad things from happening.
So:
1. This only happens in `autotools` builds, so we should go ahead and put it into `autotools.py` instead of in the global build environment, and
2. The variable does too little and provides a false sense of security in the first place, so we'll just disable it and avoid the nuisance. If we really feel strongly about this we can put some warnings in Spack about running as root, but at the top level, not in the middle of an already running script like `configure`.
* SourceForge: Mirror Mixin
Add a mixing class for direct `CNAME`s to sourceforge mirrors.
Since the main gateway servers are often down, this could reduce
timeouts and fetch errors for sourceforge.net hosted software.
* SourceForge: unspectacular mirror replacement
add mirrors to all sourceforge packages with trivial
download logic.
tested fetch of latest version of each of these packages
with various mirrors before committing.
* SourceForge: xz
the author homepage is chronocially overrun and this is the offical
upload with many mirrors.
`DYLD_LIBRARY_PATH` can frequently break builtin macOS software when
pointed at Spack libraries. This is because it takes *higher* precedence
than the default library search paths, which are used by system software.
`DYLD_FALLBACK_LIBRARY_PATH`, on the other hand, takes lower precedence.
At first glance, this might seem bad, because the software installed by
Spack in an environment needs to find *its* libraries, and it should not
use the defaults. However, Spack's isntallations are always `RPATH`'d,
so they do not have this problem.
`DYLD_FALLBACK_LIBRARY_PATH` is thus useful for things built in an
environment that need to use Spack's libraries, that don't set *their*
RPATHs correctly for whatever reason. We now prefer it to
`DYLD_LIBRARY_PATH` in modules and in environments because it helps a
little bit, and it is much less intrusive.
provided (#15662).
Prior to this fix, the checked Spec object would not be populated, and
concretization would fail.
Co-authored-by: Marc Allen <mrcall@amazon.com>
`spack test` has a spurious '[+] ' in the output:
```
lib/spack/spack/test/install.py .........[+] ......
```
Output is properly suppressed:
```
lib/spack/spack/test/install.py ...............
```
Makes the following changes:
* (Fixes#15620) tty configuration was failing when stdout was
redirected. The implementation now creates a pseudo terminal for
stdin and checks stdout properly, so redirections of stdin/out/err
should be handled now.
* Handles terminal configuration when the Spack process moves between
the foreground and background (possibly multiple times) during a
build.
* Spack adjusts terminal settings to allow users to to enable/disable
build process output to the terminal using a "v" toggle, abnormal
exit cases (like CTRL-C) could leave the terminal in an unusable
state. This is addressed here with a special-case handler which
restores terminal settings.
Significantly extend testing of process output logger:
* New PseudoShell object for setting up a master and child process
and configuring file descriptor inheritance between the two
* Tests for "v" verbosity toggle making use of the added PseudoShell
object
* Added `uniq` function which takes a list of elements and replaces
any consecutive sequence of duplicate elements with a single
instance (e.g. "112211" -> "121")
Co-authored-by: Adam J. Stewart <ajstewart426@gmail.com>
