diff --git a/share/spack/setup-env.sh b/share/spack/setup-env.sh index a00681ef7f..c5bd32882d 100755 --- a/share/spack/setup-env.sh +++ b/share/spack/setup-env.sh @@ -6,11 +6,11 @@ ######################################################################## # -# This file is part of Spack and sets up the spack environment for -# bash and zsh. This includes dotkit support, module support, and -# it also puts spack in your path. The script also checks that -# at least module support exists, and provides suggestions if it -# doesn't. Source it like this: +# This file is part of Spack and sets up the spack environment for bash, +# zsh, and dash (sh). This includes dotkit support, module support, and +# it also puts spack in your path. The script also checks that at least +# module support exists, and provides suggestions if it doesn't. Source +# it like this: # # . /path/to/spack/share/spack/setup-env.sh # @@ -39,24 +39,25 @@ # spack dotfiles. ######################################################################## -function spack { - # Zsh does not do word splitting by default, this enables it for this function only +spack() { + # Zsh does not do word splitting by default, this enables it for this + # function only if [ -n "${ZSH_VERSION:-}" ]; then emulate -L sh fi - # save raw arguments into an array before butchering them - args=( "$@" ) - # accumulate initial flags for main spack command _sp_flags="" - while [[ "$1" =~ ^- ]]; do + while [ "${1#-}" != "${1}" ]; do _sp_flags="$_sp_flags $1" shift done # h and V flags don't require further output parsing. - if [[ (! -z "$_sp_flags") && ("$_sp_flags" =~ '.*h.*' || "$_sp_flags" =~ '.*V.*') ]]; then + if [ -n "$_sp_flags" ] && \ + [ "${_sp_flags#*h}" != "${_sp_flags}" ] || \ + [ "${_sp_flags#*V}" != "${_sp_flags}" ]; + then command spack $_sp_flags "$@" return fi @@ -66,7 +67,6 @@ function spack { _sp_subcommand="$1" shift fi - _sp_spec=("$@") # Filter out use and unuse. For any other commands, just run the # command. @@ -77,11 +77,11 @@ function spack { _sp_arg="$1" shift fi - if [[ "$_sp_arg" = "-h" || "$_sp_arg" = "--help" ]]; then + if [ "$_sp_arg" = "-h" ] || [ "$_sp_arg" = "--help" ]; then command spack cd -h else LOC="$(spack location $_sp_arg "$@")" - if [[ -d "$LOC" ]] ; then + if [ -d "$LOC" ] ; then cd "$LOC" else return 1 @@ -96,31 +96,41 @@ function spack { shift fi - if [[ "$_sp_arg" = "-h" || "$_sp_arg" = "--help" ]]; then + if [ "$_sp_arg" = "-h" ] || [ "$_sp_arg" = "--help" ]; then command spack env -h else case $_sp_arg in activate) _a="$@" - if [ -z "$1" -o "${_a#*--sh}" != "$_a" -o "${_a#*--csh}" != "$_a" -o "${_a#*-h}" != "$_a" ]; then + if [ -z "$1" ] || \ + [ "${_a#*--sh}" != "$_a" ] || \ + [ "${_a#*--csh}" != "$_a" ] || \ + [ "${_a#*-h}" != "$_a" ]; + then # no args or args contain -h/--help, --sh, or --csh: just execute - command spack "${args[@]}" + command spack env activate "$@" else # actual call to activate: source the output eval $(command spack $_sp_flags env activate --sh "$@") fi ;; deactivate) - if [ -n "$1" ]; then - # with args: execute the command - command spack "${args[@]}" + _a="$@" + if [ "${_a#*--sh}" != "$_a" ] || \ + [ "${_a#*--csh}" != "$_a" ]; + then + # just execute the command if --sh or --csh are provided + command spack env deactivate "$@" + elif [ -n "$*" ]; then + # any other arguments are an error or help, so just run help + command spack env deactivate -h else - # no args: source the output. + # no args: source the output of the command eval $(command spack $_sp_flags env deactivate --sh) fi ;; *) - command spack "${args[@]}" + command spack env $_sp_arg "$@" ;; esac fi @@ -130,8 +140,11 @@ function spack { # Shift any other args for use off before parsing spec. _sp_subcommand_args="" _sp_module_args="" - while [[ "$1" =~ ^- ]]; do - if [ "$1" = "-r" -o "$1" = "--dependencies" ]; then + while [ "${1#-}" != "${1}" ]; do + if [ "$1" = "-h" ] || [ "$1" = "--help" ]; then + command spack $_sp_flags $_sp_subcommand $_sp_subcommand_args "$@" + return + elif [ "$1" = "-r" ] || [ "$1" = "--dependencies" ]; then _sp_subcommand_args="$_sp_subcommand_args $1" else _sp_module_args="$_sp_module_args $1" @@ -139,51 +152,54 @@ function spack { shift done - _sp_spec=("$@") - # Here the user has run use or unuse with a spec. Find a matching # spec using 'spack module find', then use the appropriate module # tool's commands to add/remove the result from the environment. # If spack module command comes back with an error, do nothing. case $_sp_subcommand in "use") - if _sp_full_spec=$(command spack $_sp_flags module dotkit find $_sp_subcommand_args "${_sp_spec[@]}"); then + if _sp_full_spec=$(command spack $_sp_flags module dotkit find $_sp_subcommand_args "$@"); then use $_sp_module_args $_sp_full_spec else $(exit 1) - fi ;; + fi + ;; "unuse") - if _sp_full_spec=$(command spack $_sp_flags module dotkit find $_sp_subcommand_args "${_sp_spec[@]}"); then + if _sp_full_spec=$(command spack $_sp_flags module dotkit find $_sp_subcommand_args "$@"); then unuse $_sp_module_args $_sp_full_spec else $(exit 1) - fi ;; + fi + ;; "load") - if _sp_full_spec=$(command spack $_sp_flags module tcl find $_sp_subcommand_args "${_sp_spec[@]}"); then + if _sp_full_spec=$(command spack $_sp_flags module tcl find $_sp_subcommand_args "$@"); then module load $_sp_module_args $_sp_full_spec else $(exit 1) - fi ;; + fi + ;; "unload") - if _sp_full_spec=$(command spack $_sp_flags module tcl find $_sp_subcommand_args "${_sp_spec[@]}"); then + if _sp_full_spec=$(command spack $_sp_flags module tcl find $_sp_subcommand_args "$@"); then module unload $_sp_module_args $_sp_full_spec else $(exit 1) - fi ;; + fi + ;; esac ;; *) - command spack "${args[@]}" + command spack $_sp_flags $_sp_subcommand "$@" ;; esac } + ######################################################################## # Prepends directories to path, if they exist. # pathadd /path/to/dir # add to PATH # or pathadd OTHERPATH /path/to/dir # add to OTHERPATH ######################################################################## -function _spack_pathadd { +_spack_pathadd() { # If no variable name is supplied, just append to PATH # otherwise append to that variable. _pa_varname=PATH @@ -196,7 +212,10 @@ function _spack_pathadd { # Do the actual prepending here. eval "_pa_oldvalue=\${${_pa_varname}:-}" - if [ -d "$_pa_new_path" ] && [[ ":$_pa_oldvalue:" != *":$_pa_new_path:"* ]]; then + _pa_canonical=":$_pa_oldvalue:" + if [ -d "$_pa_new_path" ] && \ + [ "${_pa_canonical#*:${_pa_new_path}:}" = "${_pa_canonical}" ]; + then if [ -n "$_pa_oldvalue" ]; then eval "export $_pa_varname=\"$_pa_new_path:$_pa_oldvalue\"" else @@ -205,29 +224,11 @@ function _spack_pathadd { fi } -# Export spack function so it is available in subshells (only works with bash) -if [ -n "${BASH_VERSION:-}" ]; then - export -f spack -fi - -# -# Figure out where this file is. Below code needs to be portable to -# bash and zsh. -# -_sp_source_file="${BASH_SOURCE[0]:-}" # Bash's location of last sourced file. -if [ -z "$_sp_source_file" ]; then - _sp_source_file="${(%):-%N}" # zsh way to do it - if [ -z "$_sp_source_file" ]; then - # Not zsh either... bail out with plain old $0, - # which WILL NOT work if this is sourced indirectly. - _sp_source_file="$0" - fi -fi # # Determine which shell is being used # -function _spack_determine_shell() { +_spack_determine_shell() { # This logic is derived from the cea-hpc/modules profile.sh example at # https://github.com/cea-hpc/modules/blob/master/init/profile.sh.in # @@ -241,23 +242,71 @@ function _spack_determine_shell() { PS_FORMAT= ps -p $$ | tail -n 1 | awk '{print $4}' | sed 's/^-//' | xargs basename fi } -export SPACK_SHELL=$(_spack_determine_shell) +_sp_shell=$(_spack_determine_shell) + + +# Export spack function so it is available in subshells (only works with bash) +if [ "$_sp_shell" = bash ]; then + export -f spack +fi + +# +# Figure out where this file is. +# +if [ "$_sp_shell" = bash ]; then + _sp_source_file="${BASH_SOURCE[0]:-}" +elif [ "$_sp_shell" = zsh ]; then + _sp_source_file="${(%):-%N}" +else + # Try to read the /proc filesystem (works on linux without lsof) + # In dash, the sourced file is the last one opened (and it's kept open) + _sp_source_file_fd="$(\ls /proc/$$/fd 2>/dev/null | sort -n | tail -1)" + if ! _sp_source_file="$(readlink /proc/$$/fd/$_sp_source_file_fd)"; then + # Last resort: try lsof. This works in dash on macos -- same reason. + # macos has lsof installed by default; some linux containers don't. + _sp_lsof_output="$(lsof -p $$ -Fn0 | tail -1)" + _sp_source_file="${_sp_lsof_output#*n}" + fi + + # If we can't find this script's path after all that, bail out with + # plain old $0, which WILL NOT work if this is sourced indirectly. + if [ ! -f "$_sp_source_file" ]; then + _sp_source_file="$0" + fi +fi # # Find root directory and add bin to path. # # We send cd output to /dev/null to avoid because a lot of users set up # their shell so that cd prints things out to the tty. -# _sp_share_dir="$(cd "$(dirname $_sp_source_file)" > /dev/null && pwd)" _sp_prefix="$(cd "$(dirname $(dirname $_sp_share_dir))" > /dev/null && pwd)" +if [ -x "$_sp_prefix/bin/spack" ]; then + export SPACK_ROOT="${_sp_prefix}" +else + # If the shell couldn't find the sourced script, fall back to + # whatever the user set SPACK_ROOT to. + if [ -n "$SPACK_ROOT" ]; then + _sp_prefix="$SPACK_ROOT" + _sp_share_dir="$_sp_prefix/share/spack" + fi + + # If SPACK_ROOT didn't work, fail. We should need this rarely, as + # the tricks above for finding the sourced file are pretty robust. + if [ ! -x "$_sp_prefix/bin/spack" ]; then + echo "==> Error: SPACK_ROOT must point to spack's prefix when using $_sp_shell" + echo "Run this with the correct prefix before sourcing setup-env.sh:" + echo " export SPACK_ROOT=" + return 1 + fi +fi _spack_pathadd PATH "${_sp_prefix%/}/bin" -export SPACK_ROOT="${_sp_prefix}" # # Check whether a function of the given name is defined # -function _spack_fn_exists() { +_spack_fn_exists() { LANG= type $1 2>&1 | grep -q 'function' } @@ -266,7 +315,6 @@ if ! _spack_fn_exists use && ! _spack_fn_exists module; then need_module="yes" fi; - # # make available environment-modules # @@ -284,18 +332,19 @@ if [ "${need_module}" = "yes" ]; then fi export MODULE_PREFIX_BIN _spack_pathadd PATH "${MODULE_PREFIX_BIN}" - module() { eval `${MODULE_PREFIX_BIN}/modulecmd ${SPACK_SHELL} $*`; } + module() { eval `${MODULE_PREFIX_BIN}/modulecmd ${_sp_shell} $*`; } fi; else eval `spack --print-shell-vars sh` fi; + # # set module system roots # _sp_multi_pathadd() { local IFS=':' - if [[ -n "${ZSH_VERSION:-}" ]]; then + if [ "$_sp_shell" = zsh ]; then setopt sh_word_split fi for pth in $2; do @@ -307,6 +356,6 @@ _sp_multi_pathadd DK_NODE "$_sp_dotkit_roots" # Add programmable tab completion for Bash # -if [ -n "${BASH_VERSION:-}" ]; then +if [ "$_sp_shell" = bash ]; then source $_sp_share_dir/spack-completion.bash fi