#----------------------------------*-sh-*-------------------------------------- # ========= | # \\ / F ield | OpenFOAM: The Open Source CFD Toolbox # \\ / O peration | # \\ / A nd | Copyright held by original author # \\/ M anipulation | #------------------------------------------------------------------------------ # License # This file is part of OpenFOAM. # # OpenFOAM is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by the # Free Software Foundation; either version 2 of the License, or (at your # option) any later version. # # OpenFOAM is distributed in the hope that it will be useful, but WITHOUT # ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or # FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License # for more details. # # You should have received a copy of the GNU General Public License # along with OpenFOAM; if not, write to the Free Software Foundation, # Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA # # Script # etc/settings.csh # # Description # Startup file for OpenFOAM # Sourced from OpenFOAM-??/etc/cshrc # #------------------------------------------------------------------------------ # prefix to PATH alias _foamAddPath 'set path=(\!* $path)' # prefix to LD_LIBRARY_PATH alias _foamAddLib 'setenv LD_LIBRARY_PATH \!*\:${LD_LIBRARY_PATH}' # location of the jobControl directory setenv FOAM_JOB_DIR $WM_PROJECT_INST_DIR/jobControl # wmake configuration setenv WM_DIR $WM_PROJECT_DIR/wmake setenv WM_LINK_LANGUAGE c++ setenv WM_OPTIONS $WM_ARCH$WM_COMPILER$WM_PRECISION_OPTION$WM_COMPILE_OPTION set path=($WM_DIR $path) #setenv WM_DECOMP_INC -DCELL_DECOMP #setenv WM_DECOMP_LIBS "-lcellDecompFiniteElement -lcellDecompositionMotionSolver" setenv WM_DECOMP_INC -DFACE_DECOMP setenv WM_DECOMP_LIBS "-lfaceDecompFiniteElement -lfaceDecompositionMotionSolver" # base configuration setenv FOAM_APP $WM_PROJECT_DIR/applications setenv FOAM_APPBIN $WM_PROJECT_DIR/applications/bin/$WM_OPTIONS setenv FOAM_LIB $WM_PROJECT_DIR/lib setenv FOAM_LIBBIN $WM_PROJECT_DIR/lib/$WM_OPTIONS setenv FOAM_SRC $WM_PROJECT_DIR/src # shared site configuration - similar naming convention as ~OpenFOAM expansion setenv FOAM_SITE_APPBIN $WM_PROJECT_INST_DIR/site/$WM_PROJECT_VERSION/bin/$WM_OPTIONS setenv FOAM_SITE_LIBBIN $WM_PROJECT_INST_DIR/site/$WM_PROJECT_VERSION/lib/$WM_OPTIONS # user configuration setenv FOAM_USER_APPBIN $WM_PROJECT_USER_DIR/applications/bin/$WM_OPTIONS setenv FOAM_USER_LIBBIN $WM_PROJECT_USER_DIR/lib/$WM_OPTIONS # convenience setenv FOAM_TUTORIALS $WM_PROJECT_DIR/tutorials setenv FOAM_UTILITIES $FOAM_APP/utilities setenv FOAM_SOLVERS $FOAM_APP/solvers setenv FOAM_RUN $WM_PROJECT_USER_DIR/run # add OpenFOAM scripts and wmake to the path set path=($WM_DIR $WM_PROJECT_DIR/bin $path) _foamAddPath $FOAM_APPBIN _foamAddPath $FOAM_SITE_APPBIN _foamAddPath $FOAM_USER_APPBIN # Make sure to pick up dummy versions of external libraries last _foamAddLib $FOAM_LIBBIN/dummy _foamAddLib $FOAM_LIBBIN _foamAddLib $FOAM_SITE_LIBBIN _foamAddLib $FOAM_USER_LIBBIN # Select compiler installation # ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # compilerInstall = OpenFOAM | System #set compilerInstall=OpenFOAM set compilerInstall=System switch ("$compilerInstall") case OpenFOAM: switch ("$WM_COMPILER") case Gcc: setenv WM_COMPILER_DIR $WM_THIRD_PARTY_DIR/gcc-4.3.3/platforms/$WM_ARCH$WM_COMPILER_ARCH _foamAddLib $WM_THIRD_PARTY_DIR/mpfr-2.4.1/platforms/$WM_ARCH$WM_COMPILER_ARCH/lib _foamAddLib $WM_THIRD_PARTY_DIR/gmp-4.2.4/platforms/$WM_ARCH$WM_COMPILER_ARCH/lib breaksw case Gcc43: setenv WM_COMPILER_DIR $WM_THIRD_PARTY_DIR/gcc-4.3.3/platforms/$WM_ARCH$WM_COMPILER_ARCH _foamAddLib $WM_THIRD_PARTY_DIR/mpfr-2.4.1/platforms/$WM_ARCH$WM_COMPILER_ARCH/lib _foamAddLib $WM_THIRD_PARTY_DIR/gmp-4.2.4/platforms/$WM_ARCH$WM_COMPILER_ARCH/lib breaksw case Gcc42: setenv WM_COMPILER_DIR $WM_THIRD_PARTY_DIR/gcc-4.2.4/platforms/$WM_ARCH$WM_COMPILER_ARCH breaksw endsw # Check that the compiler directory can be found if ( ! -d "$WM_COMPILER_DIR" ) then echo echo "Warning in $WM_PROJECT_DIR/etc/settings.csh:" echo " Cannot find $WM_COMPILER_DIR installation." echo " Please install this compiler version or if you wish to use the system compiler," echo " change the 'compilerInstall' setting to 'System' in this file" echo endif _foamAddPath ${WM_COMPILER_DIR}/bin _foamAddLib ${WM_COMPILER_DIR}/lib${WM_COMPILER_LIB_ARCH} _foamAddLib ${WM_COMPILER_DIR}/lib breaksw endsw # Communications library # ~~~~~~~~~~~~~~~~~~~~~~ unset MPI_ARCH_PATH switch ("$WM_MPLIB") case OPENMPI: set mpi_version=openmpi-1.3.3 setenv MPI_HOME $WM_THIRD_PARTY_DIR/$mpi_version setenv MPI_ARCH_PATH $MPI_HOME/platforms/$WM_OPTIONS # Tell OpenMPI where to find its install directory setenv OPAL_PREFIX $MPI_ARCH_PATH _foamAddPath $MPI_ARCH_PATH/bin _foamAddLib $MPI_ARCH_PATH/lib setenv FOAM_MPI_LIBBIN $FOAM_LIBBIN/$mpi_version unset mpi_version breaksw case SYSTEMOPENMPI: # This uses the installed openmpi. It needs mpicc installed! set mpi_version=openmpi-system # Set compilation flags here instead of in wmake/rules/../mplibSYSTEMOPENMPI setenv PINC `mpicc --showme:compile` setenv PLIBS `mpicc --showme:link` set libDir=`echo "$PLIBS" | sed -e 's/.*-L\([^ ]*\).*/\1/'` if ($?FOAM_VERBOSE && $?prompt) then echo "Using system installed MPI:" echo " compile flags : $PINC" echo " link flags : $PLIBS" echo " libmpi dir : $libDir" endif _foamAddLib $libDir setenv FOAM_MPI_LIBBIN $FOAM_LIBBIN/$mpi_version unset mpi_version libDir breaksw case MPICH: set mpi_version=mpich-1.2.4 setenv MPI_HOME $WM_THIRD_PARTY_DIR/$mpi_version setenv MPI_ARCH_PATH $MPI_HOME/platforms/$WM_OPTIONS setenv MPICH_ROOT $MPI_ARCH_PATH _foamAddPath $MPI_ARCH_PATH/bin _foamAddLib $MPI_ARCH_PATH/lib setenv FOAM_MPI_LIBBIN $FOAM_LIBBIN/$mpi_version unset mpi_version breaksw case MPICH-GM: setenv MPI_ARCH_PATH /opt/mpi setenv MPICH_PATH $MPI_ARCH_PATH setenv MPICH_ROOT $MPI_ARCH_PATH setenv GM_LIB_PATH /opt/gm/lib64 _foamAddPath $MPI_ARCH_PATH/bin _foamAddLib $MPI_ARCH_PATH/lib _foamAddLib $GM_LIB_PATH setenv FOAM_MPI_LIBBIN $FOAM_LIBBIN/mpich-gm breaksw case HPMPI: setenv MPI_HOME /opt/hpmpi setenv MPI_ARCH_PATH $MPI_HOME setenv MPICH_ROOT=$MPI_ARCH_PATH _foamAddPath $MPI_ARCH_PATH/bin switch (`uname -m`) case i686: _foamAddLib $MPI_ARCH_PATH/lib/linux_ia32 breaksw case x86_64: _foamAddLib $MPI_ARCH_PATH/lib/linux_amd64 breaksw case ia64: _foamAddLib $MPI_ARCH_PATH/lib/linux_ia64 breaksw default: echo Unknown processor type `uname -m` for Linux breaksw endsw setenv FOAM_MPI_LIBBIN $FOAM_LIBBIN/hpmpi breaksw case GAMMA: setenv MPI_ARCH_PATH /usr setenv FOAM_MPI_LIBBIN $FOAM_LIBBIN/gamma breaksw case MPI: setenv MPI_ARCH_PATH /opt/mpi setenv FOAM_MPI_LIBBIN $FOAM_LIBBIN/mpi breaksw case FJMPI: setenv MPI_ARCH_PATH /opt/FJSVmpi2 setenv FOAM_MPI_LIBBIN $FOAM_LIBBIN/mpi _foamAddPath $MPI_ARCH_PATH/bin _foamAddLib $MPI_ARCH_PATH/lib/sparcv9 _foamAddLib /opt/FSUNf90/lib/sparcv9 _foamAddLib /opt/FJSVpnidt/lib breaksw case QSMPI: setenv MPI_ARCH_PATH /usr/lib/mpi setenv FOAM_MPI_LIBBIN FOAM_LIBBIN/qsmpi _foamAddPath $MPI_ARCH_PATH/bin _foamAddLib $MPI_ARCH_PATH/lib breaksw default: setenv FOAM_MPI_LIBBIN $FOAM_LIBBIN/dummy breaksw endsw _foamAddLib $FOAM_MPI_LIBBIN # Set the minimum MPI buffer size (used by all platforms except SGI MPI) # ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ set minBufferSize=20000000 if ( $?MPI_BUFFER_SIZE ) then if ( $MPI_BUFFER_SIZE < $minBufferSize ) then setenv MPI_BUFFER_SIZE $minBufferSize endif else setenv MPI_BUFFER_SIZE $minBufferSize endif # CGAL library if available # ~~~~~~~~~~~~~~~~~~~~~~~~~ if ( $?CGAL_LIB_DIR ) then _foamAddLib $CGAL_LIB_DIR endif # Switch on the hoard memory allocator if available # ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ #if ( -f $FOAM_LIBBIN/libhoard.so ) then # setenv LD_PRELOAD $FOAM_LIBBIN/libhoard.so:${LD_PRELOAD} #endif # cleanup environment: # ~~~~~~~~~~~~~~~~~~~~ unalias _foamAddPath unalias _foamAddLib unset minBufferSize # -----------------------------------------------------------------------------