#!/bin/bash
#------------------------------------------------------------------------------
# =========                 |
# \\      /  F ield         | foam-extend: Open Source CFD
#  \\    /   O peration     |
#   \\  /    A nd           | For copyright notice see file Copyright
#    \\/     M anipulation  |
#------------------------------------------------------------------------------
# License
#     This file is part of foam-extend.
#
#     foam-extend is free software: you can redistribute it and/or modify it
#     under the terms of the GNU General Public License as published by the
#     Free Software Foundation, either version 3 of the License, or (at your
#     option) any later version.
#
#     foam-extend is distributed in the hope that it will be useful, but
#     WITHOUT ANY WARRANTY; without even the implied warranty of
#     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
#     General Public License for more details.
#
#     You should have received a copy of the GNU General Public License
#     along with foam-extend.  If not, see <http://www.gnu.org/licenses/>.
#
# Script
#     AllMake.stage3
#
# Description
#     Build script for ThirdParty packages: Stage3
#
#     The ThirdParty libraries
#
# Requirements:
#     1: Your foam-extend environment must be properly initialized
#     2: AllMake.stage1 if you are overriding your system compiler
#     3: AllMake.stage2 if you are overriding your system comm. libraries
#
# Author:
#     Martin Beaudoin, Hydro-Quebec, (2015)
#
#------------------------------------------------------------------------------
# run from third-party directory only
cd ${0%/*} || exit 1

wmakeCheckPwd "$WM_THIRD_PARTY_DIR" || {
    echo "Error: Current directory is not \$WM_THIRD_PARTY_DIR"
    echo "    The environment variables are inconsistent with the installation."
    echo "    Check the foam-extend entries in your dot-files and source them."
    exit 1
}
. tools/makeThirdPartyFunctionsForRPM
#------------------------------------------------------------------------------

echo ========================================
echo Starting ThirdParty AllMake: Stage3
echo ========================================
echo

# Metis
if [ -z "$METIS_SYSTEM" ]
then
    # metis 5.1.0
    #
    [ ! -z "$WM_THIRD_PARTY_USE_METIS_510" ] && {
	echo "Building metis 5.1.0"
	( rpm_make -p metis-5.1.0 -s metis-5.1.0.spec -u http://downloads.sourceforge.net/project/foam-extend/ThirdParty/metis-5.1.0.tar.gz )
    }
else
    echo "Using system installed Metis"
    echo ""
fi

# ParMGridGen
if [ -z "$PARMGRIDGEN_SYSTEM" ]
then
    # ParMGridGen 1.0
    #
    [ ! -z "$WM_THIRD_PARTY_USE_PARMGRIDGEN_10" ] && {
	echo "Building ParMGridGen 1.0"
        #( rpm_make -p ParMGridGen-1.0 -s ParMGridGen-1.0.spec -u http://www.mgnet.org/mgnet/Codes/parmgridgen/ParMGridGen-1.0.tar.gz       )
	    ( rpm_make -p ParMGridGen-1.0 -s ParMGridGen-1.0.spec -u http://downloads.sourceforge.net/project/foam-extend/ThirdParty/ParMGridGen-1.0.tar.gz )
    }
else
    echo "Using system installed ParMGridGen"
    echo ""
fi

# Libccmio
if [ -z "$LIBCCMIO_SYSTEM" ]
then
    # Libccmio 2.6.1
    #
    [ ! -z "$WM_THIRD_PARTY_USE_LIBCCMIO_261" ] && {
	echo "Building Libccmio 2.6.1"
	( rpm_make -p libccmio-2.6.1 -s libccmio-2.6.1.spec -u http://portal.nersc.gov/project/visit/third_party/libccmio-2.6.1.tar.gz )
    }
else
    echo "Using system installed Libccmio"
    echo ""
fi

# Mesquite
if [ -z "$MESQUITE_SYSTEM" ]
then
    # Mesquite 2.1.2
    #
    [ ! -z "$WM_THIRD_PARTY_USE_MESQUITE_212" ] && {
	echo "Building Mesquite 2.1.2"
	( rpm_make -p mesquite-2.1.2 -s mesquite-2.1.2.spec -u http://downloads.sourceforge.net/project/foam-extend/ThirdParty/mesquite-2.1.2.tar.gz )
    }
else
    echo "Using system installed Mesquite"
    echo ""
fi

# The following three packages depends on the availability of OpenMPI
# The macro rpm_make() will make sure to update the ThirdParty environment variables before starting
# the compilation.
# Just make sure the OpenMPI environment variables are properly initialized, or that
# the AllMake.stage2 script completed correctly
#
# Scotch
if [ -z "$SCOTCH_SYSTEM" ]
then
    # Scotch 6.0.4
    #
    [ ! -z "$WM_THIRD_PARTY_USE_SCOTCH_604" ] && {
	echo "Building Scotch 6.0.4"
	#( rpm_make -p scotch-6.0.4 -s scotch-6.0.4.spec -u http://gforge.inria.fr/frs/download.php/file/34618/scotch_6.0.4.tar.gz )
	( rpm_make -p scotch-6.0.4 -s scotch-6.0.4.spec -u  http://downloads.sourceforge.net/project/foam-extend/ThirdParty/scotch_6.0.4.tar.gz )
    }
    # Scotch 6.0.0
    #
    [ ! -z "$WM_THIRD_PARTY_USE_SCOTCH_600" ] && {
	echo "Building Scotch 6.0.0"
	( rpm_make -p scotch-6.0.0 -s scotch-6.0.0.spec -u http://downloads.sourceforge.net/project/foam-extend/ThirdParty/scotch-6.0.0.tar.gz )
    }
else
    echo "Using system installed Scotch"
    echo ""
fi

# ParMetis
if [ -z "$PARMETIS_SYSTEM" ]
then
    # ParMetis 4.0.3
    #
    [ ! -z "$WM_THIRD_PARTY_USE_PARMETIS_403" ] && {
	echo "Building ParMetis 4.0.3"
	( rpm_make -p parmetis-4.0.3 -s parmetis-4.0.3.spec -u http://glaros.dtc.umn.edu/gkhome/fetch/sw/parmetis/parmetis-4.0.3.tar.gz )
    }
else
    echo "Using system installed ParMetis"
    echo ""
fi

# Zoltan
if [ -z "$ZOLTAN_SYSTEM" ]
then
    # Zoltan 3.6
    #
    [ ! -z "$WM_THIRD_PARTY_USE_ZOLTAN_36" ] && {
	echo "Building Zoltan 3.6"
	( rpm_make -p zoltan-3.6 -s zoltan-3.6.spec -u http://www.cs.sandia.gov/~kddevin/Zoltan_Distributions/zoltan_distrib_v3.6.tar.gz )
    }
else
    echo "Using system installed Zoltan"
    echo ""
fi

# PyFoam
if [ -z "$PYFOAM_SYSTEM" ]
then
    # PyFoam 0.6.3
    #
    [ ! -z "$WM_THIRD_PARTY_USE_PYFOAM_063" ] && {
	echo "Building PyFoam 0.6.3"
	( rpm_make -p PyFoam-0.6.3 -s PyFoam-0.6.3.spec  -u http://openfoamwiki.net/images/c/cb/PyFoam-0.6.3.tar.gz -n PyFoam-0.6.3-1.noarch -a noarch)
    }
    # PyFoam 0.6.4
    #
    [ ! -z "$WM_THIRD_PARTY_USE_PYFOAM_064" ] && {
	echo "Building PyFoam 0.6.4"
	( rpm_make -p PyFoam-0.6.4 -s PyFoam-0.6.4.spec  -u http://openfoamwiki.net/images/3/3b/PyFoam-0.6.4.tar.gz -n PyFoam-0.6.4-1.noarch -a noarch)
    }
    # PyFoam 0.6.6
    #
    [ ! -z "$WM_THIRD_PARTY_USE_PYFOAM_066" ] && {
	echo "Building PyFoam 0.6.6"
	( rpm_make -p PyFoam-0.6.6 -s PyFoam-0.6.6.spec  -u https://openfoamwiki.net/images/a/af/PyFoam-0.6.6.tar.gz -n PyFoam-0.6.6-1.noarch -a noarch)
    }
    # PyFoam 0.6.9
    #
    [ ! -z "$WM_THIRD_PARTY_USE_PYFOAM_069" ] && {
	echo "Building PyFoam 0.6.9"
	( rpm_make -p PyFoam-0.6.9 -s PyFoam-0.6.9.spec  -u https://files.pythonhosted.org/packages/78/f5/8f65b66c8ac0e5415f785809e182dd0f0dc562a42094e1a86bd22c7d7ece/PyFoam-0.6.9.tar.gz -n PyFoam-0.6.9-1.noarch -a noarch)
    }
else
    echo "Using system installed PyFoam"
    echo ""
fi

# hwloc
if [ -z "$HWLOC_SYSTEM" ]
then
    # hwloc 2.0.1
    #
    [ ! -z "$WM_THIRD_PARTY_USE_HWLOC_201" ] && {
	echo "Building hwloc 2.0.1"
    ( rpm_make -p hwloc-2.0.1 -s hwloc-2.0.1.spec  -u http://www.open-mpi.org/software/hwloc/v2.0/downloads/hwloc-2.0.1.tar.gz )
	# ( rpm_make -p hwloc-2.0.1 -s hwloc-2.0.1.spec  -u http://downloads.sourceforge.net/project/foam-extend/ThirdParty/hwloc-2.0.1.tar.gz )
    }
    # hwloc 1.10.1
    #
    [ ! -z "$WM_THIRD_PARTY_USE_HWLOC_1101" ] && {
	echo "Building hwloc 1.10.1"
    # ( rpm_make -p hwloc-1.10.1 -s hwloc-1.10.1.spec  -u http://www.open-mpi.org/software/hwloc/v1.10/downloads/hwloc-1.10.1.tar.gz )
	( rpm_make -p hwloc-1.10.1 -s hwloc-1.10.1.spec  -u http://downloads.sourceforge.net/project/foam-extend/ThirdParty/hwloc-1.10.1.tar.gz )
    }
    # hwloc 1.7.2
    #
    [ ! -z "$WM_THIRD_PARTY_USE_HWLOC_172" ] && {
	echo "Building hwloc 1.7.2"
	( rpm_make -p hwloc-1.7.2 -s hwloc-1.7.2.spec  -u http://downloads.sourceforge.net/project/foam-extend/ThirdParty/hwloc-1.7.2.tar.gz )
    }
else
    echo "Using system installed hwloc"
    echo ""
fi

echo ========================================
echo Done ThirdParty AllMake: Stage3
echo ========================================
echo

# ----------------------------------------------------------------- end-of-file