exaFOAM/foam-extend4.1-coherent-io
Archived
1
1
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

Updated buildInstructions

Browse source
This commit is contained in:
Dominik Christ 2014-04-03 18:15:36 +01:00
parent 39f09a8abd
commit ba2fb57811
12 changed files with 131 additions and 1052 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

8
ReleaseNotes-foam-extend-3.0
View file

@ -47,9 +47,11 @@ Contents:
Apple Mac OS X. Apple Mac OS X.
** From source ** From source
Please refer to doc/buildInstructions/ for details. If you have Please refer to doc/buildInstructions/ for details. Further
improvements or build instructions for a new system, please share them installation instruction are available on the unofficial OpenFOAM Wiki:
with the community (see section "How to contribute", below). http://openfoamwiki.net/index.php/Installation/Linux/foam-extend-3.0
If you have improvements or build instructions for a new system, please
share them with the community (see section "How to contribute", below).
** Binary packages ** Binary packages
Binary packages are available for download at Binary packages are available for download at

167
doc/buildInstructions/Arch/Manjaro/Compilation_Manjaro_64bit.txt
View file

@ -1,167 +0,0 @@
Installation of OpenFOAM-1.6-ext on Arch - Manjaro
--------------------------------------------------
Update your Manjaro installation:
pacman -Syyu
--------------------------------------------------------------------------------
# Installation of additional system packages:
pacman -S git
pacman -S mercurial
pacman -S graphviz
pacman -S doxygen
--------------------------------------------------------------------------------
# Minor correction for make/gmake
sudo ln -s /usr/bin/make /usr/local/bin/gmake
--------------------------------------------------------------------------------
# Installation of rpm version 5.2.1 from source code
# Compilation of beecrypt-4.2.1
cd /tmp
wget http://downloads.sourceforge.net/project/beecrypt/beecrypt/4.2.1/beecrypt-4.2.1.tar.gz
tar -zxvf beecrypt-4.2.1.tar.gz
cd beecrypt-4.2.1;
./configure --without-python --without-cplusplus
make
sudo make install
# Compilation of rpm-5.2.1
cd /tmp
wget https://launchpad.net/rpm/5.2/5.2.1/+download/rpm-5.2.1.tar.gz
tar -zxvf rpm-5.2.1.tar.gz
cd rpm-5.2.1
./configure
make
sudo make install
# The rpm command is now available under /usr/local/bin/rpm
# Cleanup
cd /tmp
rm -rf beecrypt-4.2.1 beecrypt-4.2.1.tar.gz rpm-5.2.1 rpm-5.2.1.tar.gz
--------------------------------------------------------------------------------
# Download OpenFOAM-1.6-ext
mkdir ~/OpenFOAM
cd ~/OpenFOAM
git clone git://openfoam-extend.git.sourceforge.net/gitroot/openfoam-extend/OpenFOAM-1.6-ext
--------------------------------------------------------------------------------
# We need to tweak our OpenFOAM setup using the prefs.sh file
cp ~/OpenFOAM/OpenFOAM-1.6-ext/etc/prefs.sh-EXAMPLE \
~/OpenFOAM/OpenFOAM-1.6-ext/etc/prefs.sh
--------------------------------------------------------------------------------
# We are going to use version 4.6.4 of gcc, provided by the ThirdParty packages
#
# The version of gcc 4.8.1 provided by Manjaro is too recent for the git 'master' branch.
#
# So the system installed compiler will only serve to compile gcc 4.6.4.
# Modify the etc/prefs.sh file to switch to gcc 4.6.4
sed -i s/"compilerInstall=System"/"compilerInstall=OpenFOAM\nWM_COMPILER=Gcc46"/g ~/OpenFOAM/OpenFOAM-1.6-ext/etc/prefs.sh
# Activate the compilation of gcc 4.6.4 in the ThirdParty/AllMake.stage1 file
sed -i 0,/"#( rpm_make -p gmp-5.1.2"/s//"( rpm_make -p gmp-5.1.2"/ ~/OpenFOAM/OpenFOAM-1.6-ext/ThirdParty/AllMake.stage1
sed -i 0,/"#( rpm_make -p mpfr-3.1.2"/s//"( rpm_make -p mpfr-3.1.2"/ ~/OpenFOAM/OpenFOAM-1.6-ext/ThirdParty/AllMake.stage1
sed -i 0,/"#( rpm_make -p mpc-1.0.1"/s//"( rpm_make -p mpc-1.0.1"/ ~/OpenFOAM/OpenFOAM-1.6-ext/ThirdParty/AllMake.stage1
sed -i 0,/"#( rpm_make -p gcc-4.6.4"/s//"( rpm_make -p gcc-4.6.4"/ ~/OpenFOAM/OpenFOAM-1.6-ext/ThirdParty/AllMake.stage1
--------------------------------------------------------------------------------
# We are going to use the version of QT4 provided by Manjaro
# Unfortunately, the 'qmake' command on Manjaro is called 'qmake-qt4'
# The compilation script for ParaView requires a command called 'qmake'.
# So we are going to make a symbolic link in order to create a 'qmake' command,
# but this should be seen as a bad fix. A much better fix will be contributed under
# 'nextRelease' branch. Until then, this will have to do.
sudo ln -s /usr/bin/qmake-qt4 /usr/local/bin/qmake
# Uncomment and modify the initialization of the variables QT_DIR in the
# file prefs.sh
sed -i s/"#export QT_DIR=path_to_system_installed_qt"/"export QT_DIR=\/usr\/local"/g ~/OpenFOAM/OpenFOAM-1.6-ext/etc/prefs.sh
sed -i s/"#export QT_BIN_DIR=\$QT_DIR\/bin"/"export QT_BIN_DIR=\$QT_DIR\/bin"/g ~/OpenFOAM/OpenFOAM-1.6-ext/etc/prefs.sh
# This section of the prefs.sh file should now look like this:
#export QT_THIRD_PARTY=1
export QT_DIR=/usr/local
export QT_BIN_DIR=$QT_DIR/bin
--------------------------------------------------------------------------------
# Source this initial OpenFOAM environment to get the basic configuration for
# compilation
. ~/OpenFOAM/OpenFOAM-1.6-ext/etc/bashrc
# You will get some warnings about missing file for gcc-4.6.4, and problem with
# your compiler installation.
# This is quite normal, your gcc-4.6.4 compiler is not even compiled and
# installed yet. Patience patience...
# Compile the ThirdParty packages, including the gcc 4.6.4 compiler
cd $WM_PROJECT_DIR/ThirdParty
./AllMake >& log.AllMake &
tail -f log.AllMake # To keep an eye on the compilation process
--------------------------------------------------------------------------------
# Update your OpenFOAM environment to get the basic configuration from the newly
# compiled ThirdParty packages
. ~/OpenFOAM/OpenFOAM-1.6-ext/etc/bashrc
# Compile OpenFOAM-1.6-ext
cd $WM_PROJECT_DIR
./Allwmake >& log.Allwmake &
tail -f log.Allwmake # To keep an eye on the compilation process
--------------------------------------------------------------------------------
# Execute Allwmake a second time because of a bad library building sequence for
# the library -lfaceDecompositionMotionSolver
./Allwmake >& log.Allwmake2 &
tail -f log.Allwmake2 # To keep an eye on the compilation process
--------------------------------------------------------------------------------
# Run a tutorial to check the basic functionality
cd $FOAM_TUTORIAL/incompressible/simpleFoam/pitzDaily
blockMesh >& log.blockMesh
simpleFoam >& log.simpleFoam
paraFoam
--------------------------------------------------------------------------------
# You can also generate the Doxygen documentation, which is quite handy if
# you plan to poke around the OpenFOAM source code
cd $WM_PROJECT_DIR/doc
./Allwmake
# You are done!
--------------------------------------------------------------------------------
Martin Beaudoin
October 2013

164
doc/buildInstructions/Centos/5.5/Compilation_Centos_5.5_64bit.txt
View file

@ -1,164 +0,0 @@
Installation of OpenFOAM-1.6-ext on Centos 5.5 64-bit
--------------------------------------------------------------------------------
Network download and installation from:
ftp://mirrors.usc.edu/pub/linux/distributions/centos/5.5/os/x86_64/
Basic configuration:
Desktop - Gnome
Packages from CentOS Extras: unchecked
Complete installation log: /root/install.log
Run Package updater to update your installation
--------------------------------------------------------------------------------
Add your user as a valid user for the command 'sudo'.
You will need to use the command 'visudo' as the user root for this.
I won't go into the details for this, there is a lot of info all over the Net
for doing this relatively minor adjustment.
In doubt, simply ask your local Unix guru.
--------------------------------------------------------------------------------
# Add the EPEL package repository:
sudo rpm -Uvh http://download.fedora.redhat.com/pub/epel/5/x86_64/epel-release-5-4.noarch.rpm
--------------------------------------------------------------------------------
# Installation of additional system packages:
sudo yum install git-1.7.4.1-1.el5.x86_64
sudo yum install gcc.x86_64 gcc-c++.x86_64
sudo yum install bison.x86_64
sudo yum install flex.x86_64
sudo yum install rpm-build-4.4.2.3-22.el5.x86_64
sudo yum install zlib-devel-1.2.3-3.x86_64
sudo yum install libX11-devel.x86_64
sudo yum install libXext-devel.x86_64
sudo yum install libXrender-devel.x86_64
sudo yum install libXt-devel-1.0.2-3.2.el5.x86_64
# You can also install everything at once:
sudo yum install \
git-1.7.4.1-1.el5.x86_64 \
gcc.x86_64 gcc-c++.x86_64 \
bison.x86_64 \
flex.x86_64 \
rpm-build-4.4.2.3-22.el5.x86_64 \
zlib-devel-1.2.3-3.x86_64 \
libX11-devel.x86_64 \
libXext-devel.x86_64 \
libXrender-devel.x86_64 \
libXt-devel-1.0.2-3.2.el5.x86_64
--------------------------------------------------------------------------------
# Download OpenFOAM-1.6-ext
mkdir ~/OpenFOAM
cd ~/OpenFOAM
git clone git://git.code.sf.net/p/openfoam-extend/OpenFOAM-1.6-ext
--------------------------------------------------------------------------------
# We need to tweak our OpenFOAM setup using the prefs.sh file
cp ~/OpenFOAM/OpenFOAM-1.6-ext/etc/prefs.sh-EXAMPLE \
~/OpenFOAM/OpenFOAM-1.6-ext/etc/prefs.sh
--------------------------------------------------------------------------------
# We are going to use version 4.4.5 of gcc, provided by the ThirdParty packages
#
# The versions provided by Centos 5.5 are either too old, or a just a preview
# version of gcc 4.4.0, which is a bit 'green'.
#
# So the system installed compiler will only serve to compile gcc 4.4.5.
# Modify the etc/prefs.sh file to switch to gcc 4.4.5
sed -i s/"compilerInstall=System"/"compilerInstall=OpenFOAM\nWM_COMPILER=Gcc44"/g ~/OpenFOAM/OpenFOAM-1.6-ext/etc/prefs.sh
# Activate the compilation of gcc 4.4.5 in the ThirdParty/AllMake.stage1 file
sed -i 0,/"#( rpm_make -p gmp-5.0.1"/s//"( rpm_make -p gmp-5.0.1"/ ~/OpenFOAM/OpenFOAM-1.6-ext/ThirdParty/AllMake.stage1
sed -i 0,/"#( rpm_make -p mpfr-3.0.1"/s//"( rpm_make -p mpfr-3.0.1"/ ~/OpenFOAM/OpenFOAM-1.6-ext/ThirdParty/AllMake.stage1
sed -i 0,/"#( rpm_make -p gcc-4.4.5"/s//"( rpm_make -p gcc-4.4.5"/ ~/OpenFOAM/OpenFOAM-1.6-ext/ThirdParty/AllMake.stage1
# Add the wmake rules set for Gcc44
ln -s ~/OpenFOAM/OpenFOAM-1.6-ext/wmake/rules/linux64Gcc ~/OpenFOAM/OpenFOAM-1.6-ext/wmake/rules/linux64Gcc44
--------------------------------------------------------------------------------
# We are going to use the version of QT4 provided by the ThirdParty packages
# Uncomment and modify the initialization of the variables QT_THIRD_PARTY in the
# file prefs.sh
sed -i s/"#export QT_THIRD_PARTY=1"/"export QT_THIRD_PARTY=1"/g ~/OpenFOAM/OpenFOAM-1.6-ext/etc/prefs.sh
# This section of the prefs.sh file should now look like this:
export QT_THIRD_PARTY=1
#export QT_DIR=path_to_system_installed_qt
#export QT_BIN_DIR=$QT_DIR/bin
--------------------------------------------------------------------------------
# Source this initial OpenFOAM environment to get the basic configuration for
# compilation
. ~/OpenFOAM/OpenFOAM-1.6-ext/etc/bashrc
# You will get some warnings about missing file for gcc-4.4.5, and problem with
# your compiler installation.
# This is quite normal, your gcc-4.4.5 compiler is not even compiled and
# installed yet. Patience patience...
# Compile the ThirdParty packages, including the gcc 4.4.5 compiler
cd $WM_PROJECT_DIR/ThirdParty
./AllMake >& log.AllMake &
tail -f log.AllMake # To keep an eye on the compilation process
--------------------------------------------------------------------------------
# Update your OpenFOAM environment to get the basic configuration from the newly
# compiled ThirdParty packages
. ~/OpenFOAM/OpenFOAM-1.6-ext/etc/bashrc
# Compile OpenFOAM-1.6-ext
cd $WM_PROJECT_DIR
./Allwmake >& log.Allwmake &
tail -f log.Allwmake # To keep an eye on the compilation process
--------------------------------------------------------------------------------
# Execute Allwmake a second time because of a bad library building sequence for
# the library -lfaceDecompositionMotionSolver
./Allwmake >& log.Allwmake2 &
tail -f log.Allwmake2 # To keep an eye on the compilation process
--------------------------------------------------------------------------------
# Run a tutorial to check the basic functionality
cd $FOAM_TUTORIAL/incompressible/simpleFoam/pitzDaily
blockMesh >& log.blockMesh
simpleFoam >& log.simpleFoam
paraFoam
# You are done!
--------------------------------------------------------------------------------
Martin Beaudoin
August 2011

55
doc/buildInstructions/Fedora/Fedora19 Normal file
View file

@ -0,0 +1,55 @@
Below are build instructions for Fedora 19:
These instructions assume that you install in the default location, which is
~/foam/ . Create this folder with:
cd ~
mkdir foam
* Obtain and unpack source code (if you read this, you probably already have):
The recommended way is to get the source code through git source code
management system. This way, you can get updates and bugfixes easily by running
"git pull". To install into the default location run:
cd ~/foam
git clone git://git.code.sf.net/p/openfoam-extend/foam-extend-3.0
Alternatively, you can download a snapshot (.tgz) of the source code from:
http://sourceforge.net/projects/openfoam-extend/files/foam-extend-3.0/
* Install required packages:
sudo yum groupinstall "Development Tools"
sudo yum install gcc-c++ binutils-devel bison flex m4 zlib-devel \
qt-devel qtwebkit-devel mercurial
* Set environment variables:
cd ~/foam/foam-extend-3.0
. etc/bashrc
Optionally, set environment variable for Qt to compile ParaView:
export QT_BIN_DIR=/usr/lib64/qt4/bin
Optionally, set environment variable for compiling Cuda solvers, for example
(replace "sm_30" with value according to your GPU architecture):
export CUDA_ARCH=sm_30
* Compile:
./Allwmake.firstInstall
* Create user directory:
mkdir -p $FOAM_RUN
And you are ready to start.

13
doc/buildInstructions/README Normal file
View file

@ -0,0 +1,13 @@
Here you can find build instructions for foam-extend-3.0 . The instructions for
different Linux distributions are in corresponding sub-folders. If you need to
take different or additional steps to get foam-extend compiled on your machine,
please file a bug at http://sourceforge.net/apps/mantisbt/openfoam-extend/.
If you compiled/installed on a Linux distribution that is not listed here,
please contribute to the project and submit installation instructions. Contact
the project admins on http://sourceforge.net/projects/openfoam-extend/ for
details.
Please also refer to the unofficial OpenFOAM Wiki for additional installation
instructions:
http://openfoamwiki.net/index.php/Installation/Linux/foam-extend-3.0

112
doc/buildInstructions/Ubuntu/10.04/Compilation_Ubuntu_10.04.3_32-bit.txt
View file

@ -1,112 +0,0 @@
Installation of OpenFOAM-1.6-ext on Ubuntu 10.04.3 32-bit
- Proceed with the installation of the OS
- Update your OS installation using "Update Manager".
- If asked to reboot your system, please do so.
--------------------------------------------------------------------------------
# Installation of additional system packages:
git: sudo apt-get install git-core
flex: sudo apt-get install flex
bison: sudo apt-get install bison
rpm: sudo apt-get install rpm
g++: sudo apt-get install g++
libz: sudo apt-get install zlib1g-dev
binutils-dev : sudo apt-get install binutils-dev
qt4: sudo apt-get install libqt4-dev qt4-dev-tools
libxext: sudo apt-get install libxext-dev
libxt : sudo apt-get install libxt-dev
# You can also install everything at once:
sudo apt-get install git-core flex bison rpm g++ zlib1g-dev binutils-dev \
libqt4-dev qt4-dev-tools libxext-dev libxt-dev
--------------------------------------------------------------------------------
# Minor correction for make/gmake
sudo ln -s /usr/bin/make /usr/bin/gmake
--------------------------------------------------------------------------------
# Installation of libstdc++.so.5:
For Ubuntu 32bit:
-----------------
Grab the package libstdc++5_3.3.6-24_i386.deb from one of the sites listed here:
http://packages.debian.org/lenny/i386/libstdc++5/download
wget http://ftp.us.debian.org/debian/pool/main/g/gcc-3.3/libstdc++5_3.3.6-24_i386.deb
dpkg-deb -x ./libstdc++5_3.3.6-24_i386.deb /tmp/tmp_dir
sudo cp /tmp/tmp_dir/usr/lib/libstdc++.so.5.0.7 /usr/lib/
sudo ln -s /usr/lib/libstdc++.so.5.0.7 /usr/lib/libstdc++.so.5
rm -rf /tmp/tmp_dir
--------------------------------------------------------------------------------
# Download OpenFOAM-1.6-ext
mkdir ~/OpenFOAM
cd ~/OpenFOAM
git clone git://git.code.sf.net/p/openfoam-extend/OpenFOAM-1.6-ext
--------------------------------------------------------------------------------
# We are going to use the system installed version of QT4
cp ~/OpenFOAM/OpenFOAM-1.6-ext/etc/prefs.sh-EXAMPLE ~/OpenFOAM/OpenFOAM-1.6-ext/etc/prefs.sh
#Uncomment and modify the initialization of the variables QT_DIR and QT_BIN_DIR in the file prefs.sh
sed -i s/"#export QT_DIR=path_to_system_installed_qt"/"export QT_DIR=\/usr"/g ~/OpenFOAM/OpenFOAM-1.6-ext/etc/prefs.sh
sed -i s/"#export QT_BIN_DIR=\$QT_DIR\/bin"/"export QT_BIN_DIR=\$QT_DIR\/bin"/g ~/OpenFOAM/OpenFOAM-1.6-ext/etc/prefs.sh
# This section of the prefs.sh file should now look like this:
#export QT_THIRD_PARTY=1
export QT_DIR=/usr
export QT_BIN_DIR=$QT_DIR/bin
--------------------------------------------------------------------------------
# Source your OpenFOAM environment to get the basic configuration for
# compilation
. ~/OpenFOAM/OpenFOAM-1.6-ext/etc/bashrc
# Compile the ThirdParty packages
cd $WM_PROJECT_DIR/ThirdParty
./AllMake >& log.AllMake &
tail -f log.AllMake # To keep an eye on the compilation process
--------------------------------------------------------------------------------
# Update your OpenFOAM environment to get the basic configuration from the newly
# compiled ThirdParty packages
. ~/OpenFOAM/OpenFOAM-1.6-ext/etc/bashrc
# Compile OpenFOAM-1.6-ext
cd $WM_PROJECT_DIR
./Allwmake >& log.Allwmake &
tail -f log.Allwmake # To keep an eye on the compilation process
--------------------------------------------------------------------------------
# Execute Allwmake a second time because of a bad library building sequence for
# the library -lfaceDecompositionMotionSolver
./Allwmake >& log.Allwmake2 &
tail -f log.Allwmake2 # To keep an eye on the compilation process
--------------------------------------------------------------------------------
# Run a tutorial to check the basic functionality
cd $FOAM_TUTORIAL/incompressible/simpleFoam/pitzDaily
blockMesh >& log.blockMesh
simpleFoam >& log.simpleFoam
paraFoam
# You are done!
--------------------------------------------------------------------------------
Martin Beaudoin
August 2011

112
doc/buildInstructions/Ubuntu/10.04/Compilation_Ubuntu_10.04.3_64-bit.txt
View file

@ -1,112 +0,0 @@
Installation of OpenFOAM-1.6-ext on Ubuntu 10.04.3 64-bit
- Proceed with the installation of the OS
- Update your OS installation using "Update Manager".
- If asked to reboot your system, please do so.
--------------------------------------------------------------------------------
# Installation of additional system packages:
git: sudo apt-get install git-core
flex: sudo apt-get install flex
bison: sudo apt-get install bison
rpm: sudo apt-get install rpm
g++: sudo apt-get install g++
libz: sudo apt-get install zlib1g-dev
binutils-dev : sudo apt-get install binutils-dev
qt4: sudo apt-get install libqt4-dev qt4-dev-tools
libxext: sudo apt-get install libxext-dev
libxt : sudo apt-get install libxt-dev
# You can also install everything at once:
sudo apt-get install git-core flex bison rpm g++ zlib1g-dev binutils-dev \
libqt4-dev qt4-dev-tools libxext-dev libxt-dev
--------------------------------------------------------------------------------
# Minor correction for make/gmake
sudo ln -s /usr/bin/make /usr/bin/gmake
--------------------------------------------------------------------------------
# Installation of libstdc++.so.5:
For Ubuntu 64bit:
-----------------
Grab the package libstdc++5_3.3.6-24_amd64.deb from one of the sites listed here:
http://packages.debian.org/lenny/amd64/Libstdc++5/download
wget http://ftp.us.debian.org/debian/pool/main/g/gcc-3.3/libstdc++5_3.3.6-24_amd64.deb
dpkg-deb -x ./libstdc++5_3.3.6-24_amd64.deb /tmp/tmp_dir
sudo cp /tmp/tmp_dir/usr/lib/libstdc++.so.5.0.7 /usr/lib/
sudo ln -s /usr/lib/libstdc++.so.5.0.7 /usr/lib/libstdc++.so.5
rm -rf /tmp/tmp_dir
--------------------------------------------------------------------------------
# Download OpenFOAM-1.6-ext
mkdir ~/OpenFOAM
cd ~/OpenFOAM
git clone git://git.code.sf.net/p/openfoam-extend/OpenFOAM-1.6-ext
--------------------------------------------------------------------------------
# We are going to use the system installed version of QT4
cp ~/OpenFOAM/OpenFOAM-1.6-ext/etc/prefs.sh-EXAMPLE ~/OpenFOAM/OpenFOAM-1.6-ext/etc/prefs.sh
#Uncomment and modify the initialization of the variables QT_DIR and QT_BIN_DIR in the file prefs.sh
sed -i s/"#export QT_DIR=path_to_system_installed_qt"/"export QT_DIR=\/usr"/g ~/OpenFOAM/OpenFOAM-1.6-ext/etc/prefs.sh
sed -i s/"#export QT_BIN_DIR=\$QT_DIR\/bin"/"export QT_BIN_DIR=\$QT_DIR\/bin"/g ~/OpenFOAM/OpenFOAM-1.6-ext/etc/prefs.sh
# This section of the prefs.sh file should now look like this:
#export QT_THIRD_PARTY=1
export QT_DIR=/usr
export QT_BIN_DIR=$QT_DIR/bin
--------------------------------------------------------------------------------
# Source your OpenFOAM environment to get the basic configuration for
# compilation
. ~/OpenFOAM/OpenFOAM-1.6-ext/etc/bashrc
# Compile the ThirdParty packages
cd $WM_PROJECT_DIR/ThirdParty
./AllMake >& log.AllMake &
tail -f log.AllMake # To keep an eye on the compilation process
--------------------------------------------------------------------------------
# Update your OpenFOAM environment to get the basic configuration from the newly
# compiled ThirdParty packages
. ~/OpenFOAM/OpenFOAM-1.6-ext/etc/bashrc
# Compile OpenFOAM-1.6-ext
cd $WM_PROJECT_DIR
./Allwmake >& log.Allwmake &
tail -f log.Allwmake # To keep an eye on the compilation process
--------------------------------------------------------------------------------
# Execute Allwmake a second time because of a bad library building sequence for
# the library -lfaceDecompositionMotionSolver
./Allwmake >& log.Allwmake2 &
tail -f log.Allwmake2 # To keep an eye on the compilation process
--------------------------------------------------------------------------------
# Run a tutorial to check the basic functionality
cd $FOAM_TUTORIAL/incompressible/simpleFoam/pitzDaily
blockMesh >& log.blockMesh
simpleFoam >& log.simpleFoam
paraFoam
# You are done!
--------------------------------------------------------------------------------
Martin Beaudoin
August 2011

120
doc/buildInstructions/Ubuntu/12.04/Compilation_Ubuntu_12.04_32-bit.txt
View file

@ -1,120 +0,0 @@
Installation of OpenFOAM-1.6-ext on Ubuntu 12.04 32-bit
- Proceed with the installation of the OS
- Update your OS installation using "Update Manager".
- If asked to reboot your system, please do so.
--------------------------------------------------------------------------------
# Installation of additional system packages:
git: sudo apt-get install git
flex: sudo apt-get install flex
bison: sudo apt-get install bison
rpm: sudo apt-get install rpm
g++: sudo apt-get install g++
libz: sudo apt-get install zlib1g-dev
binutils-dev : sudo apt-get install binutils-dev
openmpi: sudo apt-get install openmpi-bin libopenmpi-dev
libxext: sudo apt-get install libxext-dev
libxt : sudo apt-get install libxt-dev
libXrender: sudo apt-get install libxrender-dev
libstdc++5: sudo apt-get install libstdc++5
OpenGL: sudo apt-get install libgl1-mesa-dev libglu1-mesa-dev
# You can also install everything at once:
sudo apt-get install git flex bison rpm g++ zlib1g-dev binutils-dev \
openmpi-bin libopenmpi-dev libxext-dev libxt-dev libxrender-dev \
libstdc++5 libgl1-mesa-dev libglu1-mesa-dev
--------------------------------------------------------------------------------
# If you need to compile swak4Foam, it is a good idea to install Mercurial (hg)
# sudo apt-get install mercurial
--------------------------------------------------------------------------------
# Minor correction for make/gmake
sudo ln -s /usr/bin/make /usr/bin/gmake
--------------------------------------------------------------------------------
# Download OpenFOAM-1.6-ext
mkdir ~/OpenFOAM
cd ~/OpenFOAM
git clone git://git.code.sf.net/p/openfoam-extend/OpenFOAM-1.6-ext
--------------------------------------------------------------------------------
# Create the file etc/prefs.sh
cp ~/OpenFOAM/OpenFOAM-1.6-ext/etc/prefs.sh-EXAMPLE ~/OpenFOAM/OpenFOAM-1.6-ext/etc/prefs.sh
--------------------------------------------------------------------------------
# Use the system compiler
sed -i s/"compilerInstall=System"/"compilerInstall=System\nWM_COMPILER=Gcc46"/g ~/OpenFOAM/OpenFOAM-1.6-ext/etc/prefs.sh
--------------------------------------------------------------------------------
# Use the system installation of OpenMPI
sed -i s/"#export WM_MPLIB=SYSTEMOPENMPI"/"export WM_MPLIB=SYSTEMOPENMPI"/g ~/OpenFOAM/OpenFOAM-1.6-ext/etc/prefs.sh
sed -i s/"#export OPENMPI_DIR=path_to_system_installed_openmpi"/"export OPENMPI_DIR=\/usr"/g ~/OpenFOAM/OpenFOAM-1.6-ext/etc/prefs.sh
sed -i s/"#export OPENMPI_BIN_DIR=\$OPENMPI_DIR\/bin"/"export OPENMPI_BIN_DIR=\$OPENMPI_DIR\/bin"/g ~/OpenFOAM/OpenFOAM-1.6-ext/etc/prefs.sh
--------------------------------------------------------------------------------
# About QT4
#
# Ubuntu 12.04 comes with QT4 version 4.8.1
# Even thoug ParaView will compile with this version of QT, ParaView will also generate a bunch of
# warnings on the console at runtime. So we will be using the version of QT4 supplied with the
# ThirdParty packages.
#Uncomment the variable QT_THIRD_PARTY in the file prefs.sh
sed -i s/"#export QT_THIRD_PARTY=1"/"export QT_THIRD_PARTY=1"/g ~/OpenFOAM/OpenFOAM-1.6-ext/etc/prefs.sh
# This section of the prefs.sh file should now look like this:
export QT_THIRD_PARTY=1
#export QT_DIR=path_to_system_installed_qt
#export QT_BIN_DIR=$QT_DIR/bin
--------------------------------------------------------------------------------
# Source your OpenFOAM environment to get the basic configuration for
# compilation
. ~/OpenFOAM/OpenFOAM-1.6-ext/etc/bashrc
--------------------------------------------------------------------------------
# Compile the ThirdParty packages
cd $WM_PROJECT_DIR/ThirdParty
./AllMake.stage1 >& log.AllMake.stage1
#./AllMake.stage2 >& log.AllMake.stage2 # No need for this one
./AllMake.stage3 >& log.AllMake.stage3
./AllMake.stage4 >& log.AllMake.stage4
--------------------------------------------------------------------------------
# Update your OpenFOAM environment to get the basic configuration from the newly
# compiled ThirdParty packages
. ~/OpenFOAM/OpenFOAM-1.6-ext/etc/bashrc
# Compile OpenFOAM-1.6-ext
cd $WM_PROJECT_DIR
./Allwmake >& log.Allwmake &
tail -f log.Allwmake # To keep an eye on the compilation process
--------------------------------------------------------------------------------
# Run a tutorial to check the basic functionality
cd $FOAM_TUTORIAL/incompressible/simpleFoam/pitzDaily
blockMesh >& log.blockMesh
simpleFoam >& log.simpleFoam
paraFoam
# You are done!
--------------------------------------------------------------------------------
Martin Beaudoin
May 2012

119
doc/buildInstructions/Ubuntu/12.04/Compilation_Ubuntu_12.04_64-bit.txt
View file

@ -1,119 +0,0 @@
Installation of OpenFOAM-1.6-ext on Ubuntu 12.04 64-bit
- Proceed with the installation of the OS
- Update your OS installation using "Update Manager".
- If asked to reboot your system, please do so.
--------------------------------------------------------------------------------
# Installation of additional system packages:
git: sudo apt-get install git
flex: sudo apt-get install flex
bison: sudo apt-get install bison
rpm: sudo apt-get install rpm
g++: sudo apt-get install g++
libz: sudo apt-get install zlib1g-dev
binutils-dev : sudo apt-get install binutils-dev
openmpi: sudo apt-get install openmpi-bin libopenmpi-dev
libxext: sudo apt-get install libxext-dev
libxt : sudo apt-get install libxt-dev
libXrender: sudo apt-get install libxrender-dev
OpenGL: sudo apt-get install libgl1-mesa-dev libglu1-mesa-dev
# You can also install everything at once:
sudo apt-get install git flex bison rpm g++ zlib1g-dev binutils-dev \
openmpi-bin libopenmpi-dev libxext-dev libxt-dev libxrender-dev \
libgl1-mesa-dev libglu1-mesa-dev
--------------------------------------------------------------------------------
# If you need to compile swak4Foam, it is a good idea to install Mercurial (hg)
# sudo apt-get install mercurial
--------------------------------------------------------------------------------
# Minor correction for make/gmake
sudo ln -s /usr/bin/make /usr/bin/gmake
--------------------------------------------------------------------------------
# Download OpenFOAM-1.6-ext
mkdir ~/OpenFOAM
cd ~/OpenFOAM
git clone git://git.code.sf.net/p/openfoam-extend/OpenFOAM-1.6-ext
--------------------------------------------------------------------------------
# Create the file etc/prefs.sh
cp ~/OpenFOAM/OpenFOAM-1.6-ext/etc/prefs.sh-EXAMPLE ~/OpenFOAM/OpenFOAM-1.6-ext/etc/prefs.sh
--------------------------------------------------------------------------------
# Use the system compiler
sed -i s/"compilerInstall=System"/"compilerInstall=System\nWM_COMPILER=Gcc46"/g ~/OpenFOAM/OpenFOAM-1.6-ext/etc/prefs.sh
--------------------------------------------------------------------------------
# Use the system installation of OpenMPI
sed -i s/"#export WM_MPLIB=SYSTEMOPENMPI"/"export WM_MPLIB=SYSTEMOPENMPI"/g ~/OpenFOAM/OpenFOAM-1.6-ext/etc/prefs.sh
sed -i s/"#export OPENMPI_DIR=path_to_system_installed_openmpi"/"export OPENMPI_DIR=\/usr"/g ~/OpenFOAM/OpenFOAM-1.6-ext/etc/prefs.sh
sed -i s/"#export OPENMPI_BIN_DIR=\$OPENMPI_DIR\/bin"/"export OPENMPI_BIN_DIR=\$OPENMPI_DIR\/bin"/g ~/OpenFOAM/OpenFOAM-1.6-ext/etc/prefs.sh
--------------------------------------------------------------------------------
# About QT4
#
# Ubuntu 12.04 comes with QT4 version 4.8.1
# Even thoug ParaView will compile with this version of QT, ParaView will also generate a bunch of
# warnings on the console at runtime. So we will be using the version of QT4 supplied with the
# ThirdParty packages.
#Uncomment the variable QT_THIRD_PARTY in the file prefs.sh
sed -i s/"#export QT_THIRD_PARTY=1"/"export QT_THIRD_PARTY=1"/g ~/OpenFOAM/OpenFOAM-1.6-ext/etc/prefs.sh
# This section of the prefs.sh file should now look like this:
export QT_THIRD_PARTY=1
#export QT_DIR=/usr
#export QT_BIN_DIR=$QT_DIR/bin
--------------------------------------------------------------------------------
# Source your OpenFOAM environment to get the basic configuration for
# compilation
. ~/OpenFOAM/OpenFOAM-1.6-ext/etc/bashrc
--------------------------------------------------------------------------------
# Compile the ThirdParty packages
cd $WM_PROJECT_DIR/ThirdParty
./AllMake.stage1 >& log.AllMake.stage1
#./AllMake.stage2 >& log.AllMake.stage2 # No need for this one
./AllMake.stage3 >& log.AllMake.stage3
./AllMake.stage4 >& log.AllMake.stage4
--------------------------------------------------------------------------------
# Update your OpenFOAM environment to get the basic configuration from the newly
# compiled ThirdParty packages
. ~/OpenFOAM/OpenFOAM-1.6-ext/etc/bashrc
# Compile OpenFOAM-1.6-ext
cd $WM_PROJECT_DIR
./Allwmake >& log.Allwmake &
tail -f log.Allwmake # To keep an eye on the compilation process
--------------------------------------------------------------------------------
# Run a tutorial to check the basic functionality
cd $FOAM_TUTORIAL/incompressible/simpleFoam/pitzDaily
blockMesh >& log.blockMesh
simpleFoam >& log.simpleFoam
paraFoam
# You are done!
--------------------------------------------------------------------------------
Martin Beaudoin
May 2012

131
doc/buildInstructions/Ubuntu/12.10/Compilation_Ubuntu_12.10_64-bit.txt
View file

@ -1,131 +0,0 @@
Installation of OpenFOAM-1.6-ext on Ubuntu 12.10 64-bit
- Proceed with the installation of the OS
- Update your OS installation using "Update Manager".
- If asked to reboot your system, please do so.
--------------------------------------------------------------------------------
# Installation of additional system packages:
git: sudo apt-get install git
flex: sudo apt-get install flex
bison: sudo apt-get install bison
rpm: sudo apt-get install rpm
g++: sudo apt-get install g++
libz: sudo apt-get install zlib1g-dev
binutils-dev : sudo apt-get install binutils-dev
openmpi: sudo apt-get install openmpi-bin libopenmpi-dev
libxext: sudo apt-get install libxext-dev
libxt : sudo apt-get install libxt-dev
libXrender: sudo apt-get install libxrender-dev
OpenGL: sudo apt-get install libgl1-mesa-dev libglu1-mesa-dev
Python-dev: sudo apt-get install python-dev
# You can also install everything at once:
sudo apt-get install git flex bison rpm g++ zlib1g-dev binutils-dev \
openmpi-bin libopenmpi-dev libxext-dev libxt-dev libxrender-dev \
libgl1-mesa-dev libglu1-mesa-dev python-dev
--------------------------------------------------------------------------------
# If you need to compile swak4Foam, it is a good idea to install Mercurial (hg)
# and Subversion (svn)
# sudo apt-get install mercurial
# sudo apt-get install subversion
--------------------------------------------------------------------------------
# Minor correction for make/gmake
sudo ln -s /usr/bin/make /usr/bin/gmake
--------------------------------------------------------------------------------
# Download OpenFOAM-1.6-ext
mkdir ~/OpenFOAM
cd ~/OpenFOAM
git clone git://git.code.sf.net/p/openfoam-extend/OpenFOAM-1.6-ext
--------------------------------------------------------------------------------
# Create the file etc/prefs.sh
cp ~/OpenFOAM/OpenFOAM-1.6-ext/etc/prefs.sh-EXAMPLE ~/OpenFOAM/OpenFOAM-1.6-ext/etc/prefs.sh
--------------------------------------------------------------------------------
# Use the system compiler
sed -i s/"compilerInstall=System"/"compilerInstall=System\nWM_COMPILER=Gcc46"/g ~/OpenFOAM/OpenFOAM-1.6-ext/etc/prefs.sh
--------------------------------------------------------------------------------
# Use the version of OpenMPI supplied with the ThirdParty packages
# The version of OpenMPI supplied by Ubuntu 12.10 is 1.4.5, which is outdated
# So nothing to do here.
--------------------------------------------------------------------------------
# About QT4
#
# Ubuntu 12.10 comes with QT4 version 4.8.3
# Even thoug ParaView will compile with this version of QT, ParaView will also generate a bunch of
# warnings on the console at runtime. So we will be using the version of QT4 supplied with the
# ThirdParty packages.
#Uncomment the variable QT_THIRD_PARTY in the file prefs.sh
sed -i s/"#export QT_THIRD_PARTY=1"/"export QT_THIRD_PARTY=1"/g ~/OpenFOAM/OpenFOAM-1.6-ext/etc/prefs.sh
# This section of the prefs.sh file should now look like this:
export QT_THIRD_PARTY=1
#export QT_DIR=/usr
#export QT_BIN_DIR=$QT_DIR/bin
--------------------------------------------------------------------------------
# About Paraview
#
# After a lot of trials, I just cannot find a way to make the OpenFOAM-1.6-ext reader
# work under Ubuntu 12 and ParaView-3.x.
#
# So use the command 'paraFoam -nativeReader' instead in order to start ParaView with the
# OpenFOAM built-in native reader.
--------------------------------------------------------------------------------
# Source your OpenFOAM environment to get the basic configuration for
# compilation
. ~/OpenFOAM/OpenFOAM-1.6-ext/etc/bashrc
--------------------------------------------------------------------------------
# Compile the ThirdParty packages
cd $WM_PROJECT_DIR/ThirdParty
./AllMake.stage1 >& log.AllMake.stage1
./AllMake.stage2 >& log.AllMake.stage2
./AllMake.stage3 >& log.AllMake.stage3
./AllMake.stage4 >& log.AllMake.stage4
--------------------------------------------------------------------------------
# Update your OpenFOAM environment to get the basic configuration from the newly
# compiled ThirdParty packages
. ~/OpenFOAM/OpenFOAM-1.6-ext/etc/bashrc
# Compile OpenFOAM-1.6-ext
cd $WM_PROJECT_DIR
./Allwmake >& log.Allwmake &
tail -f log.Allwmake # To keep an eye on the compilation process
--------------------------------------------------------------------------------
# Run a tutorial to check the basic functionality
cd $FOAM_TUTORIAL/incompressible/simpleFoam/pitzDaily
blockMesh >& log.blockMesh
simpleFoam >& log.simpleFoam
paraFoam -nativeReader
# You are done!
--------------------------------------------------------------------------------
Martin Beaudoin
July 2013

58
doc/buildInstructions/Ubuntu/Ubuntu_12.04_and_13.10 Normal file
View file

@ -0,0 +1,58 @@
Below are build instructions for Ubuntu 12.04 and Ubuntu 13.10.
These instructions assume that you install in the default location, which is
~/foam/ . Create this folder with:
cd ~
mkdir foam
* Obtain and unpack source code (if you read this, you probably already have):
The recommended way is to get the source code through git source code
management system. This way, you can get updates and bugfixes easily by running
"git pull". To install into the default location run:
cd ~/foam
git clone git://git.code.sf.net/p/openfoam-extend/foam-extend-3.0
Alternatively, you can download a snapshot (.tgz) of the source code from:
http://sourceforge.net/projects/openfoam-extend/files/foam-extend-3.0/
* Install required packages:
sudo apt-get install git-core build-essential binutils-dev flex bison \
zlib1g-dev qt4-dev-tools libqt4-dev libncurses5-dev libxt-dev rpm mercurial
Make an additional link:
sudo ln -s /usr/bin/make /usr/bin/gmake
* Set environment variables:
cd ~/foam/foam-extend-3.0
. etc/bashrc
Optionally, set environment variable for Qt to compile ParaView:
export QT_BIN_DIR=/usr/bin
Optionally, set environment variable for compiling Cuda solvers, for example
(replace "sm_30" with value according to your GPU architecture):
export CUDA_ARCH=sm_30
* Compile:
./Allwmake.firstInstall
* Create user directory:
mkdir -p $FOAM_RUN
And you are ready to start.

124
doc/buildInstructions/openSUSE/12.1/Compilation_openSUSE_12.1_64bit.txt
View file

@ -1,124 +0,0 @@
Installation of OpenFOAM-1.6-ext on openSUSE 12.1 64-bit
--------------------------------------------------------------------------------
We assume you have a fresh installation of openSUSE 12.1 64-bit, with all the
necessary updates already applied
--------------------------------------------------------------------------------
# Installation of additional system packages:
sudo zypper install git
sudo zypper install openmpi-devel
sudo zypper install gnuplot
sudo zypper install -t pattern devel_qt4
--------------------------------------------------------------------------------
# Download OpenFOAM-1.6-ext
mkdir ~/OpenFOAM
cd ~/OpenFOAM
git clone git://git.code.sf.net/p/openfoam-extend/OpenFOAM-1.6-ext
--------------------------------------------------------------------------------
# We need to tweak our OpenFOAM setup using the prefs.sh file
cp ~/OpenFOAM/OpenFOAM-1.6-ext/etc/prefs.sh-EXAMPLE \
~/OpenFOAM/OpenFOAM-1.6-ext/etc/prefs.sh
--------------------------------------------------------------------------------
# We are going to use version system installed version of gcc 4.6.2
# Modify the etc/prefs.sh file to switch to gcc 4.6.2
sed -i s/"compilerInstall=System"/"compilerInstall=System\nWM_COMPILER=Gcc46"/g ~/OpenFOAM/OpenFOAM-1.6-ext/etc/prefs.sh
--------------------------------------------------------------------------------
# We are going to use the system installed version of openmpi-1.4.3
#
# No need to run AllMake.stage2
sed -i s/"#export WM_MPLIB=SYSTEMOPENMPI"/"export WM_MPLIB=SYSTEMOPENMPI"/g ~/OpenFOAM/OpenFOAM-1.6-ext/etc/prefs.sh
sed -i s/"#export OPENMPI_DIR=path_to_system_installed_openmpi"/"export OPENMPI_DIR=\/usr\/lib64\/mpi\/gcc\/openmpi"/g ~/OpenFOAM/OpenFOAM-1.6-ext/etc/prefs.sh
sed -i s/"#export OPENMPI_BIN_DIR=\$OPENMPI_DIR\/bin"/"export OPENMPI_BIN_DIR=\$OPENMPI_DIR\/bin"/g ~/OpenFOAM/OpenFOAM-1.6-ext/etc/prefs.sh
--------------------------------------------------------------------------------
# We are going to use the system installed development version of Qt (Version: 4.7.4-19.6.1)
# Uncomment and modify the initialization of the variables QT_DIR and QT_BIN_DIR in the
# file prefs.sh
sed -i s/"#export QT_DIR=path_to_system_installed_qt"/"export QT_DIR=\/usr"/g ~/OpenFOAM/OpenFOAM-1.6-ext/etc/prefs.sh
sed -i s/"#export QT_BIN_DIR=\$QT_DIR\/bin"/"export QT_BIN_DIR=\$QT_DIR\/bin"/g ~/OpenFOAM/OpenFOAM-1.6-ext/etc/prefs.sh
# This section of the prefs.sh file should now look like this:
#export QT_THIRD_PARTY=1
export QT_DIR=/usr
export QT_BIN_DIR=$QT_DIR/bin
--------------------------------------------------------------------------------
# ParaView:
#
# Version 3.8.1 of ParaView does not compile with gcc 4.6.2 on openSUSE 12.1
#
# I suggest you switch to ParaView 12.1
#
--------------------------------------------------------------------------------
# Source this initial OpenFOAM environment to get the basic configuration for
# compilation
. ~/OpenFOAM/OpenFOAM-1.6-ext/etc/bashrc
# Compile the ThirdParty packages
cd $WM_PROJECT_DIR/ThirdParty
./AllMake.stage1 >& log.AllMake.stage1
./AllMake.stage3 >& log.AllMake.stage3
./AllMake.stage4 >& log.AllMake.stage4
# You can keep an eye on the compilation process with the command tail e.g:
# tail -f log.AllMake.stage1
--------------------------------------------------------------------------------
# Update your OpenFOAM environment to get the basic configuration from the newly
# compiled ThirdParty packages
. ~/OpenFOAM/OpenFOAM-1.6-ext/etc/bashrc
# Compile OpenFOAM-1.6-ext
cd $WM_PROJECT_DIR
./Allwmake >& log.Allwmake &
tail -f log.Allwmake # To keep an eye on the compilation process
--------------------------------------------------------------------------------
# Execute Allwmake a second time because of a bad library building sequence for
# the library -lfaceDecompositionMotionSolver
# Warning: Not sure if this is still necessary... MB 05/2012
./Allwmake >& log.Allwmake2 &
tail -f log.Allwmake2 # To keep an eye on the compilation process
--------------------------------------------------------------------------------
# Run a tutorial to check the basic functionality
cd $FOAM_TUTORIAL/incompressible/simpleFoam/pitzDaily
blockMesh >& log.blockMesh
simpleFoam >& log.simpleFoam
paraFoam
# You are done!
--------------------------------------------------------------------------------
Martin Beaudoin
May 2012