Add ParaView 3.14.1. Modify vtkPV3Foam/Make/options for easy switching between ParaView versions

ThirdParty/AllMake.stage4

@@ -76,9 +76,13 @@ then
         ( rpm_make -p ParaView-3.8.1 -s ParaView-3.8.1.spec -u http://www.paraview.org/files/v3.8/ParaView-3.8.1.tar.gz \
             -f --define='_qmakePath $QT_BIN_DIR/qmake'      
         )
+#        ( rpm_make -p ParaView-3.14.1 -s ParaView-3.14.1.spec -u http://www.paraview.org/files/v3.14/ParaView-3.14.1-Source.tar.gz \
+#            -f --define='_qmakePath $QT_BIN_DIR/qmake'      
+#        )
     else
         echo "WARNING: "
         echo "WARNING: Skipping the installation of ParaView-3.8.1."
+#        echo "WARNING: Skipping the installation of ParaView-3.14.1."
         echo "WARNING: Please make sure the QT_BIN_DIR environment variable properly"
         echo "WARNING: initialized in the file prefs.sh or prefs.csh"
         echo "WARNING: The command \$QT_BIN_DIR/qmake needs to be valid"

ThirdParty/rpmBuild/SOURCES/ParaView-3.14.1.patch_1

@@ -0,0 +1,16 @@
+diff a/CMakeLists.txt b/CMakeLists.txt
+--- a/CMakeLists.txt
++++ b/CMakeLists.txt
+@@ -403,6 +403,12 @@
+       DESTINATION ${PV_INSTALL_CMAKE_DIR}
+       COMPONENT Development)
+       
++  # install ParaViewUse.cmake
++  INSTALL(
++      FILES   ${ParaView_SOURCE_DIR}/ParaViewUse.cmake
++      DESTINATION ${PV_INSTALL_CMAKE_DIR}
++      COMPONENT Development)
++      
+   # Re-configure for the install.
+   SET(SOURCE_TREE                                  ${ParaView_SOURCE_DIR})
+   SET(BUILD_TREE                                   ${ParaView_BINARY_DIR}) 

ThirdParty/rpmBuild/SOURCES/ParaView-3.14.1.patch_darwin

@@ -0,0 +1,12 @@
+diff -ruN ParaView-3.14.1_orig/Applications/ParaView-3.14.1_extra_install_Darwin.cmake ParaView-3.14.1/Applications/ParaView-3.14.1_extra_install_Darwin.cmake
+--- ParaView-3.14.1_orig/Applications/ParaView-3.14.1_extra_install_Darwin.cmake	1969-12-31 19:00:00.000000000 -0500
++++ ParaView-3.14.1/Applications/ParaView-3.14.1_extra_install_Darwin.cmake	2010-11-06 19:34:12.000000000 -0400
+@@ -0,0 +1,8 @@
++#
++# Additional install rules for Mac OS X platforms 
++#
++INSTALL (DIRECTORY ../../buildObj/bin/paraview.app
++           DESTINATION ${PV_INSTALL_BIN_DIR}
++	   USE_SOURCE_PERMISSIONS
++           COMPONENT Runtime)
++

ThirdParty/rpmBuild/SPECS/ParaView-3.14.1.spec

@@ -0,0 +1,289 @@
+#------------------------------------------------------------------------------
+# =========                 |
+# \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
+#  \\    /   O peration     |
+#   \\  /    A nd           | Copyright held by original author
+#    \\/     M anipulation  |
+#------------------------------------------------------------------------------
+# License
+#     This file is part of OpenFOAM.
+#
+#     OpenFOAM is free software; you can redistribute it and/or modify it
+#     under the terms of the GNU General Public License as published by the
+#     Free Software Foundation; either version 2 of the License, or (at your
+#     option) any later version.
+#
+#     OpenFOAM is distributed in the hope that it will be useful, but WITHOUT
+#     ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+#     FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+#     for more details.
+#
+#     You should have received a copy of the GNU General Public License
+#     along with OpenFOAM; if not, write to the Free Software Foundation,
+#     Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#
+# Script
+#     RPM spec file for ParaView-3.14.1
+#
+# Description
+#     RPM spec file for creating a relocatable RPM
+#
+# Author:
+#     Martin Beaudoin, Hydro-Quebec, (2010)
+#
+#------------------------------------------------------------------------------
+
+# We grab the value of WM_THIRD_PARTY and WM_OPTIONS from the environment variable
+%{expand:%%define _WM_THIRD_PARTY_DIR %(echo $WM_THIRD_PARTY_DIR)}
+%{expand:%%define _WM_OPTIONS         %(echo $WM_OPTIONS)}
+
+# Disable the generation of debuginfo packages
+%define debug_package %{nil}
+
+# The topdir needs to point to the $WM_THIRD_PARTY/rpmbuild directory
+%define _topdir	 	%{_WM_THIRD_PARTY_DIR}/rpmBuild
+%define _tmppath	%{_topdir}/tmp
+
+# Will install the package directly $WM_THIRD_PARTY_DIR
+#   Some comments about package relocation:
+#   By using this prefix for the Prefix:  parameter in thi file, you will make this 
+#   package relocatable. 
+#
+#   This is fine, as long as your software is itself relocatable.
+#
+#   Simply take note that libraries built with libtool are not relocatable because the
+#   prefix we specify will be hard-coded in the library .la files.
+#   Ref: http://sourceware.org/autobook/autobook/autobook_80.html
+#
+#   In that case, if you ever change the value of the $WM_THIRD_PARTY_DIR, you will
+#   not be able to reutilize this RPM, even though it is relocatable. You will need to 
+#   regenerate the RPM.
+#
+%define _prefix         %{_WM_THIRD_PARTY_DIR}
+
+%define name		ParaView
+%define release		%{_WM_OPTIONS}
+%define version 	3.14.1
+
+%define buildroot       %{_topdir}/BUILD/%{name}-%{version}-root
+
+BuildRoot:	        %{buildroot}
+Summary: 		ParaView
+License: 		Unkown
+Name: 			%{name}
+Version: 		%{version}
+Release: 		%{release}
+URL:                    http://www.paraview.org/files/v3.14/
+Source: 		%url/%{name}-%{version}-Source.tar.gz
+Prefix: 		%{_prefix}
+Group: 			Development/Tools
+Patch0:                 ParaView-3.14.1.patch_0_ParaView.git_0f43430
+Patch1:                 ParaView-3.14.1.patch_1
+Patch2:                 ParaView-3.14.1.patch_darwin
+
+%define _installPrefix  %{_prefix}/packages/%{name}-%{version}/platforms/%{_WM_OPTIONS}
+
+#--------------------------------------------------------------------------
+#
+# Here, we define default compiling options for cmake
+#
+# One can override the option on the commande line : --define='MACRO EXPR'
+#
+%{!?_withVerbose:     %define _withVerbose     false}
+%{!?_withMesa:        %define _withMesa        false}
+%{!?_withMPI:         %define _withMPI         false}
+%{!?_withPython:      %define _withPython      false}
+%{!?_withQt:          %define _withQt          true}
+%{!?_qmakePath:       %define _qmakePath       Undefined}
+%{!?_mesaIncludePath: %define _mesaIncludePath Undefined}
+%{!?_mesaLibPath:     %define _mesaLibPath     Undefined}
+%{!?_pythonLibPath:   %define _pythonLibPath   Undefined}
+
+#--------------------------------------------------------------------------
+
+%description
+%{summary}
+
+%prep
+%setup -q -n ParaView-3.14.1-Source
+
+# Patch from ParaView.git
+# BUG #13065. CMake files were not being installed correctly.
+%patch0 -p1
+
+# Correction to BUG #13065.
+%patch1 -p1
+
+%ifos darwin
+# Patch for proper install of paraview binary under Mac OS X
+%patch2 -p1
+%endif
+
+%build
+#
+# set CMake cache variables
+#
+    addCMakeVariable()
+    {
+        while [ -n "$1" ]
+        do
+            CMAKE_VARIABLES="$CMAKE_VARIABLES -D$1"
+            shift
+        done
+   }
+
+    # export WM settings in a form that GNU configure recognizes
+    [ -n "$WM_CC" ]         &&  export CC="$WM_CC"
+    [ -n "$WM_CXX" ]        &&  export CXX="$WM_CXX"
+    [ -n "$WM_CFLAGS" ]     &&  export CFLAGS="$WM_CFLAGS"
+    [ -n "$WM_CXXFLAGS" ]   &&  export CXXFLAGS="$WM_CXXFLAGS"
+    [ -n "$WM_LDFLAGS" ]    &&  export LDFLAGS="$WM_LDFLAGS"
+
+    set +x
+    echo ""
+    echo "Compilation options:"
+    echo "     _withVerbose     : %{_withVerbose}"
+    echo "     _withMesa        : %{_withMesa}"
+    echo "     _withMPI         : %{_withMPI}"
+    echo "     _withPython      : %{_withPython}"
+    echo "     _withQt          : %{_withQt}"
+    echo "     _qmakePath       : %{_qmakePath}"
+    echo "     _mesaIncludePath : %{_mesaIncludePath}"
+    echo "     _mesaLibPath     : %{_mesaLibPath}"
+    echo "     _pythonLibPath   : %{_pythonLibPath}"
+    echo ""
+    set -x
+
+    # start with these general settings
+    addCMakeVariable  VTK_USE_TK:BOOL=OFF
+    addCMakeVariable  BUILD_SHARED_LIBS:BOOL=ON  VTK_USE_RPATH:BOOL=OFF
+    addCMakeVariable  CMAKE_BUILD_TYPE:STRING=Release
+
+    # include development files in "make install"
+    addCMakeVariable  PARAVIEW_INSTALL_DEVELOPMENT:BOOL=ON
+
+    # new alternative to "make HTMLDocumentation"
+    addCMakeVariable  PARAVIEW_GENERATE_PROXY_DOCUMENTATION:BOOL=OFF
+
+ %ifos darwin
+    # Additional installation rules for Mac OS X 
+    addCMakeVariable  PARAVIEW_EXTRA_INSTALL_RULES_FILE:FILEPATH=%{_topdir}/BUILD/%{name}-%{version}-Source/Applications/ParaView-3.14.1_extra_install_Darwin.cmake
+%endif
+
+    # Add the value of _qmakePath for QT_QMAKE_EXECUTABLE
+    addCMakeVariable  QT_QMAKE_EXECUTABLE:FILEPATH=%{_qmakePath}
+
+    echo "CMAKE_VARIABLES: $CMAKE_VARIABLES"
+
+    mkdir -p ./buildObj
+    cd ./buildObj
+
+    cmake \
+        -DCMAKE_INSTALL_PREFIX:PATH=%{_installPrefix} \
+        $CMAKE_VARIABLES \
+	..
+
+    [ -z "$WM_NCOMPPROCS" ] && WM_NCOMPPROCS=1
+    make -j $WM_NCOMPPROCS
+
+%install
+    # On OpenSUSE, rpmbuild, will choke when detecting unreferenced symlinks
+    # created during installation.
+    # Qt version 4.6.3 will generate some unreferenced symlinks when
+    # ParaView is compiled and installed. By enabling the following
+    # environment variable, the command brp-symlink will still complain
+    # about missing link targets, but it won't stop rpmbuild from generating
+    # the final rpm.
+    # For all other Unix distros, this is a no-op.
+    export NO_BRP_STALE_LINK_ERROR=yes
+
+    cd buildObj
+    make install DESTDIR=$RPM_BUILD_ROOT
+
+    # Creation of OpenFOAM specific .csh and .sh files"
+
+    echo ""
+    echo "Generating OpenFOAM specific .csh and .sh files for the package %{name}-%{version}"
+    echo ""
+    #
+    # Generate package specific .sh file for OpenFOAM
+    #
+mkdir -p $RPM_BUILD_ROOT/%{_installPrefix}/etc
+cat << DOT_SH_EOF > $RPM_BUILD_ROOT/%{_installPrefix}/etc/%{name}-%{version}.sh
+# Load %{name}-%{version} libraries and binaries if available
+# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+export PARAVIEW_DIR=\$WM_THIRD_PARTY_DIR/packages/%{name}-%{version}/platforms/\$WM_OPTIONS
+export PARAVIEW_BIN_DIR=\$PARAVIEW_DIR/bin
+export PARAVIEW_LIB_DIR=\$PARAVIEW_DIR/lib
+export PARAVIEW_INCLUDE_DIR=\$PARAVIEW_DIR/include/paraview-3.14
+
+export PARAVIEW_VERSION=%{version}
+
+# NB: It is important to set the PV_PLUGIN_PATH location to a directory containing only the ParaView plugins.
+#     Otherwise, paraview will try to automatically autoload each and every dynamic library it can find in the
+#     specified directory to see if a given library is a paraview plugin. 
+#     In the case of \$FOAM_LIBBIN, with over 80 libraries, this is a total waste of time that will slow down the
+#     startup of paraview or even make paraview crash on startup.
+export PV_PLUGIN_PATH=\$FOAM_LIBBIN/paraview_plugins
+
+[ -d \$PARAVIEW_LIB_DIR/paraview-3.14 ] && _foamAddLib \$PARAVIEW_LIB_DIR/paraview-3.14
+
+# Enable access to the package applications if present
+[ -d \$PARAVIEW_BIN_DIR ] && _foamAddPath \$PARAVIEW_BIN_DIR
+
+# Additional binary path if running on Mac OS X
+[ -d \$PARAVIEW_BIN_DIR/paraview.app/Contents/MacOS ] && _foamAddPath \$PARAVIEW_BIN_DIR/paraview.app/Contents/MacOS
+
+DOT_SH_EOF
+
+    #
+    # Generate package specific .csh file for OpenFOAM
+    #
+cat << DOT_CSH_EOF > $RPM_BUILD_ROOT/%{_installPrefix}/etc/%{name}-%{version}.csh
+# Load %{name}-%{version} libraries and binaries if available
+# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+setenv PARAVIEW_DIR \$WM_THIRD_PARTY_DIR/packages/%{name}-%{version}/platforms/\$WM_OPTIONS
+setenv PARAVIEW_BIN_DIR \$PARAVIEW_DIR/bin
+setenv PARAVIEW_LIB_DIR \$PARAVIEW_DIR/lib
+setenv PARAVIEW_INCLUDE_DIR \$PARAVIEW_DIR/include/paraview-3.14
+
+setenv PARAVIEW_VERSION %{version}
+
+# NB: It is important to set the PV_PLUGIN_PATH location to a directory containing only the ParaView plugins.
+#     Otherwise, paraview will try to automatically autoload each and every dynamic library it can find in the
+#     specified directory to see if a given library is a paraview plugin. 
+#     In the case of \$FOAM_LIBBIN, with over 80 libraries, this is a total waste of time that will slow down the
+#     startup of paraview or even make paraview crash on startup.
+setenv PV_PLUGIN_PATH \$FOAM_LIBBIN/paraview_plugins
+
+if ( -e \$PARAVIEW_BIN_DIR ) then
+    _foamAddPath \$PARAVIEW_BIN_DIR
+endif
+
+if ( -e \$PARAVIEW_LIB_DIR/paraview-3.14 ) then
+    _foamAddLib \$PARAVIEW_LIB_DIR/paraview-3.14
+endif
+
+
+# Additional binary path if running on Mac OS X
+if ( -e \$PARAVIEW_BIN_DIR/paraview.app/Contents/MacOS ) then
+    _foamAddPath \$PARAVIEW_BIN_DIR/paraview.app/Contents/MacOS
+endif
+DOT_CSH_EOF
+
+    #finally, generate a .tgz file for systems where using rpm for installing packages
+    # as a non-root user might be a problem.
+    (mkdir -p  %{_topdir}/TGZS/%{_target_cpu}; cd $RPM_BUILD_ROOT/%{_prefix}; tar -zcvf %{_topdir}/TGZS/%{_target_cpu}/%{name}-%{version}.tgz  packages/%{name}-%{version})
+
+    # Make sure we clean the installation directory. Somehow, make install generates files there. Need to revisit this eventually.
+    (rm -rf %{_prefix}/packages/%{name}-%{version}    )
+
+%clean
+rm -rf $RPM_BUILD_ROOT    
+rm -rf %{_prefix}/packages/%{name}-%{version}   
+
+%files
+%defattr(-,root,root)
+%{_installPrefix}
+

ThirdParty/rpmBuild/SPECS/ParaView-3.8.1.spec

@@ -206,7 +206,7 @@ cat << DOT_SH_EOF > $RPM_BUILD_ROOT/%{_installPrefix}/etc/%{name}-%{version}.sh
 export PARAVIEW_DIR=\$WM_THIRD_PARTY_DIR/packages/%{name}-%{version}/platforms/\$WM_OPTIONS
 export PARAVIEW_BIN_DIR=\$PARAVIEW_DIR/bin
 export PARAVIEW_LIB_DIR=\$PARAVIEW_DIR/lib
-export PARAVIEW_INCLUDE_DIR=\$PARAVIEW_DIR/include
+export PARAVIEW_INCLUDE_DIR=\$PARAVIEW_DIR/include/paraview-3.8
 
 export PARAVIEW_VERSION=%{version}
 
@@ -236,7 +236,7 @@ cat << DOT_CSH_EOF > $RPM_BUILD_ROOT/%{_installPrefix}/etc/%{name}-%{version}.cs
 setenv PARAVIEW_DIR \$WM_THIRD_PARTY_DIR/packages/%{name}-%{version}/platforms/\$WM_OPTIONS
 setenv PARAVIEW_BIN_DIR \$PARAVIEW_DIR/bin
 setenv PARAVIEW_LIB_DIR \$PARAVIEW_DIR/lib
-setenv PARAVIEW_INCLUDE_DIR \$PARAVIEW_DIR/include
+setenv PARAVIEW_INCLUDE_DIR \$PARAVIEW_DIR/include/paraview-3.8
 
 setenv PARAVIEW_VERSION %{version}
 

applications/utilities/postProcessing/graphics/PV3FoamReader/vtkPV3Foam/Make/options

@@ -2,7 +2,7 @@ EXE_INC = \
     -I$(LIB_SRC)/finiteVolume/lnInclude \
     -I$(LIB_SRC)/lagrangian/basic/lnInclude \
     -I$(LIB_SRC)/meshTools/lnInclude \
-    -I$(PARAVIEW_INCLUDE_DIR)/paraview-3.8 \
+    -I$(PARAVIEW_INCLUDE_DIR) \
     -I../PV3FoamReader
 
 LIB_LIBS = \

etc/settings.csh

@@ -453,6 +453,10 @@ if ( $?PARAVIEW_SYSTEM == 0 && -e "$WM_THIRD_PARTY_DIR"/packages/ParaView-3.8.1
     _foamSource $WM_THIRD_PARTY_DIR/packages/ParaView-3.8.1/platforms/$WM_OPTIONS/etc/ParaView-3.8.1.csh
 endif
 
+#if ( $?PARAVIEW_SYSTEM == 0 && -e "$WM_THIRD_PARTY_DIR"/packages/ParaView-3.14.1 ) then
+#    _foamSource $WM_THIRD_PARTY_DIR/packages/ParaView-3.14.1/platforms/$WM_OPTIONS/etc/ParaView-3.14.1.csh
+#endif
+
 if ( $WM_ARCH == "darwinIntel" || $WM_ARCH == "darwinIntel64" ) then
     setenv DYLD_LIBRARY_PATH ${LD_LIBRARY_PATH}
 endif

etc/settings.sh

@@ -543,6 +543,10 @@ export MPI_BUFFER_SIZE
 [ -z "$PARAVIEW_SYSTEM" ] && [ -e $WM_THIRD_PARTY_DIR/packages/ParaView-3.8.1 ] && {
     _foamSource $WM_THIRD_PARTY_DIR/packages/ParaView-3.8.1/platforms/$WM_OPTIONS/etc/ParaView-3.8.1.sh
 }
+
+#[ -z "$PARAVIEW_SYSTEM" ] && [ -e $WM_THIRD_PARTY_DIR/packages/ParaView-3.14.1 ] && {
+#    _foamSource $WM_THIRD_PARTY_DIR/packages/ParaView-3.14.1/platforms/$WM_OPTIONS/etc/ParaView-3.14.1.sh
+#}
 [ "$FOAM_VERBOSE" -a "$PS1" ] && echo "    PARAVIEW_DIR is initialized to: $PARAVIEW_DIR"